kernel-fxtec-pro1x/include/asm-arm/hardware/sharpsl_pm.h
Linus Torvalds 0cd61b68c3 Initial blind fixup for arm for irq changes
Untested, but this should fix up the bulk of the totally mechanical
issues, and should make the actual detail fixing easier.

Signed-off-by: Linus Torvalds <torvalds@osdl.org>
2006-10-06 10:59:54 -07:00

106 lines
2.9 KiB
C

/*
* SharpSL Battery/PM Driver
*
* Copyright (c) 2004-2005 Richard Purdie
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/interrupt.h>
struct sharpsl_charger_machinfo {
void (*init)(void);
void (*exit)(void);
int gpio_acin;
int gpio_batfull;
int batfull_irq;
int gpio_batlock;
int gpio_fatal;
void (*discharge)(int);
void (*discharge1)(int);
void (*charge)(int);
void (*measure_temp)(int);
void (*presuspend)(void);
void (*postsuspend)(void);
void (*earlyresume)(void);
unsigned long (*read_devdata)(int);
#define SHARPSL_BATT_VOLT 1
#define SHARPSL_BATT_TEMP 2
#define SHARPSL_ACIN_VOLT 3
#define SHARPSL_STATUS_ACIN 4
#define SHARPSL_STATUS_LOCK 5
#define SHARPSL_STATUS_CHRGFULL 6
#define SHARPSL_STATUS_FATAL 7
unsigned long (*charger_wakeup)(void);
int (*should_wakeup)(unsigned int resume_on_alarm);
void (*backlight_limit)(int);
int (*backlight_get_status) (void);
int charge_on_volt;
int charge_on_temp;
int charge_acin_high;
int charge_acin_low;
int fatal_acin_volt;
int fatal_noacin_volt;
int bat_levels;
struct battery_thresh *bat_levels_noac;
struct battery_thresh *bat_levels_acin;
struct battery_thresh *bat_levels_noac_bl;
struct battery_thresh *bat_levels_acin_bl;
int status_high_acin;
int status_low_acin;
int status_high_noac;
int status_low_noac;
};
struct battery_thresh {
int voltage;
int percentage;
};
struct battery_stat {
int ac_status; /* APM AC Present/Not Present */
int mainbat_status; /* APM Main Battery Status */
int mainbat_percent; /* Main Battery Percentage Charge */
int mainbat_voltage; /* Main Battery Voltage */
};
struct sharpsl_pm_status {
struct device *dev;
struct timer_list ac_timer;
struct timer_list chrg_full_timer;
int charge_mode;
#define CHRG_ERROR (-1)
#define CHRG_OFF (0)
#define CHRG_ON (1)
#define CHRG_DONE (2)
unsigned int flags;
#define SHARPSL_SUSPENDED (1 << 0) /* Device is Suspended */
#define SHARPSL_ALARM_ACTIVE (1 << 1) /* Alarm is for charging event (not user) */
#define SHARPSL_BL_LIMIT (1 << 2) /* Backlight Intensity Limited */
#define SHARPSL_APM_QUEUED (1 << 3) /* APM Event Queued */
#define SHARPSL_DO_OFFLINE_CHRG (1 << 4) /* Trigger the offline charger */
int full_count;
unsigned long charge_start_time;
struct sharpsl_charger_machinfo *machinfo;
struct battery_stat battstat;
};
extern struct sharpsl_pm_status sharpsl_pm;
#define SHARPSL_LED_ERROR 2
#define SHARPSL_LED_ON 1
#define SHARPSL_LED_OFF 0
void sharpsl_battery_kick(void);
void sharpsl_pm_led(int val);
irqreturn_t sharpsl_ac_isr(int irq, void *dev_id);
irqreturn_t sharpsl_chrg_full_isr(int irq, void *dev_id);
irqreturn_t sharpsl_fatal_isr(int irq, void *dev_id);