5b34821a60
Move include/asm/arch/at91rm9200_usart.h into drivers/serial and rename it atmel_usart.h. Also delete AVR32's version of this file. Signed-off-by: Haavard Skinnemoen <hskinnemoen@atmel.com> Acked-by: Andrew Victor <andrew@sanpeople.com> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
123 lines
5.6 KiB
C
123 lines
5.6 KiB
C
/*
|
|
* drivers/serial/atmel_serial.h
|
|
*
|
|
* Copyright (C) 2005 Ivan Kokshaysky
|
|
* Copyright (C) SAN People
|
|
*
|
|
* USART registers.
|
|
* Based on AT91RM9200 datasheet revision E.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#ifndef AT91RM9200_USART_H
|
|
#define AT91RM9200_USART_H
|
|
|
|
#define AT91_US_CR 0x00 /* Control Register */
|
|
#define AT91_US_RSTRX (1 << 2) /* Reset Receiver */
|
|
#define AT91_US_RSTTX (1 << 3) /* Reset Transmitter */
|
|
#define AT91_US_RXEN (1 << 4) /* Receiver Enable */
|
|
#define AT91_US_RXDIS (1 << 5) /* Receiver Disable */
|
|
#define AT91_US_TXEN (1 << 6) /* Transmitter Enable */
|
|
#define AT91_US_TXDIS (1 << 7) /* Transmitter Disable */
|
|
#define AT91_US_RSTSTA (1 << 8) /* Reset Status Bits */
|
|
#define AT91_US_STTBRK (1 << 9) /* Start Break */
|
|
#define AT91_US_STPBRK (1 << 10) /* Stop Break */
|
|
#define AT91_US_STTTO (1 << 11) /* Start Time-out */
|
|
#define AT91_US_SENDA (1 << 12) /* Send Address */
|
|
#define AT91_US_RSTIT (1 << 13) /* Reset Iterations */
|
|
#define AT91_US_RSTNACK (1 << 14) /* Reset Non Acknowledge */
|
|
#define AT91_US_RETTO (1 << 15) /* Rearm Time-out */
|
|
#define AT91_US_DTREN (1 << 16) /* Data Terminal Ready Enable */
|
|
#define AT91_US_DTRDIS (1 << 17) /* Data Terminal Ready Disable */
|
|
#define AT91_US_RTSEN (1 << 18) /* Request To Send Enable */
|
|
#define AT91_US_RTSDIS (1 << 19) /* Request To Send Disable */
|
|
|
|
#define AT91_US_MR 0x04 /* Mode Register */
|
|
#define AT91_US_USMODE (0xf << 0) /* Mode of the USART */
|
|
#define AT91_US_USMODE_NORMAL 0
|
|
#define AT91_US_USMODE_RS485 1
|
|
#define AT91_US_USMODE_HWHS 2
|
|
#define AT91_US_USMODE_MODEM 3
|
|
#define AT91_US_USMODE_ISO7816_T0 4
|
|
#define AT91_US_USMODE_ISO7816_T1 6
|
|
#define AT91_US_USMODE_IRDA 8
|
|
#define AT91_US_USCLKS (3 << 4) /* Clock Selection */
|
|
#define AT91_US_CHRL (3 << 6) /* Character Length */
|
|
#define AT91_US_CHRL_5 (0 << 6)
|
|
#define AT91_US_CHRL_6 (1 << 6)
|
|
#define AT91_US_CHRL_7 (2 << 6)
|
|
#define AT91_US_CHRL_8 (3 << 6)
|
|
#define AT91_US_SYNC (1 << 8) /* Synchronous Mode Select */
|
|
#define AT91_US_PAR (7 << 9) /* Parity Type */
|
|
#define AT91_US_PAR_EVEN (0 << 9)
|
|
#define AT91_US_PAR_ODD (1 << 9)
|
|
#define AT91_US_PAR_SPACE (2 << 9)
|
|
#define AT91_US_PAR_MARK (3 << 9)
|
|
#define AT91_US_PAR_NONE (4 << 9)
|
|
#define AT91_US_PAR_MULTI_DROP (6 << 9)
|
|
#define AT91_US_NBSTOP (3 << 12) /* Number of Stop Bits */
|
|
#define AT91_US_NBSTOP_1 (0 << 12)
|
|
#define AT91_US_NBSTOP_1_5 (1 << 12)
|
|
#define AT91_US_NBSTOP_2 (2 << 12)
|
|
#define AT91_US_CHMODE (3 << 14) /* Channel Mode */
|
|
#define AT91_US_CHMODE_NORMAL (0 << 14)
|
|
#define AT91_US_CHMODE_ECHO (1 << 14)
|
|
#define AT91_US_CHMODE_LOC_LOOP (2 << 14)
|
|
#define AT91_US_CHMODE_REM_LOOP (3 << 14)
|
|
#define AT91_US_MSBF (1 << 16) /* Bit Order */
|
|
#define AT91_US_MODE9 (1 << 17) /* 9-bit Character Length */
|
|
#define AT91_US_CLKO (1 << 18) /* Clock Output Select */
|
|
#define AT91_US_OVER (1 << 19) /* Oversampling Mode */
|
|
#define AT91_US_INACK (1 << 20) /* Inhibit Non Acknowledge */
|
|
#define AT91_US_DSNACK (1 << 21) /* Disable Successive NACK */
|
|
#define AT91_US_MAX_ITER (7 << 24) /* Max Iterations */
|
|
#define AT91_US_FILTER (1 << 28) /* Infrared Receive Line Filter */
|
|
|
|
#define AT91_US_IER 0x08 /* Interrupt Enable Register */
|
|
#define AT91_US_RXRDY (1 << 0) /* Receiver Ready */
|
|
#define AT91_US_TXRDY (1 << 1) /* Transmitter Ready */
|
|
#define AT91_US_RXBRK (1 << 2) /* Break Received / End of Break */
|
|
#define AT91_US_ENDRX (1 << 3) /* End of Receiver Transfer */
|
|
#define AT91_US_ENDTX (1 << 4) /* End of Transmitter Transfer */
|
|
#define AT91_US_OVRE (1 << 5) /* Overrun Error */
|
|
#define AT91_US_FRAME (1 << 6) /* Framing Error */
|
|
#define AT91_US_PARE (1 << 7) /* Parity Error */
|
|
#define AT91_US_TIMEOUT (1 << 8) /* Receiver Time-out */
|
|
#define AT91_US_TXEMPTY (1 << 9) /* Transmitter Empty */
|
|
#define AT91_US_ITERATION (1 << 10) /* Max number of Repetitions Reached */
|
|
#define AT91_US_TXBUFE (1 << 11) /* Transmission Buffer Empty */
|
|
#define AT91_US_RXBUFF (1 << 12) /* Reception Buffer Full */
|
|
#define AT91_US_NACK (1 << 13) /* Non Acknowledge */
|
|
#define AT91_US_RIIC (1 << 16) /* Ring Indicator Input Change */
|
|
#define AT91_US_DSRIC (1 << 17) /* Data Set Ready Input Change */
|
|
#define AT91_US_DCDIC (1 << 18) /* Data Carrier Detect Input Change */
|
|
#define AT91_US_CTSIC (1 << 19) /* Clear to Send Input Change */
|
|
#define AT91_US_RI (1 << 20) /* RI */
|
|
#define AT91_US_DSR (1 << 21) /* DSR */
|
|
#define AT91_US_DCD (1 << 22) /* DCD */
|
|
#define AT91_US_CTS (1 << 23) /* CTS */
|
|
|
|
#define AT91_US_IDR 0x0c /* Interrupt Disable Register */
|
|
#define AT91_US_IMR 0x10 /* Interrupt Mask Register */
|
|
#define AT91_US_CSR 0x14 /* Channel Status Register */
|
|
#define AT91_US_RHR 0x18 /* Receiver Holding Register */
|
|
#define AT91_US_THR 0x1c /* Transmitter Holding Register */
|
|
|
|
#define AT91_US_BRGR 0x20 /* Baud Rate Generator Register */
|
|
#define AT91_US_CD (0xffff << 0) /* Clock Divider */
|
|
|
|
#define AT91_US_RTOR 0x24 /* Receiver Time-out Register */
|
|
#define AT91_US_TO (0xffff << 0) /* Time-out Value */
|
|
|
|
#define AT91_US_TTGR 0x28 /* Transmitter Timeguard Register */
|
|
#define AT91_US_TG (0xff << 0) /* Timeguard Value */
|
|
|
|
#define AT91_US_FIDI 0x40 /* FI DI Ratio Register */
|
|
#define AT91_US_NER 0x44 /* Number of Errors Register */
|
|
#define AT91_US_IF 0x4c /* IrDA Filter Register */
|
|
|
|
#endif
|