1394f03221
This adds support for the Analog Devices Blackfin processor architecture, and currently supports the BF533, BF532, BF531, BF537, BF536, BF534, and BF561 (Dual Core) devices, with a variety of development platforms including those avaliable from Analog Devices (BF533-EZKit, BF533-STAMP, BF537-STAMP, BF561-EZKIT), and Bluetechnix! Tinyboards. The Blackfin architecture was jointly developed by Intel and Analog Devices Inc. (ADI) as the Micro Signal Architecture (MSA) core and introduced it in December of 2000. Since then ADI has put this core into its Blackfin processor family of devices. The Blackfin core has the advantages of a clean, orthogonal,RISC-like microprocessor instruction set. It combines a dual-MAC (Multiply/Accumulate), state-of-the-art signal processing engine and single-instruction, multiple-data (SIMD) multimedia capabilities into a single instruction-set architecture. The Blackfin architecture, including the instruction set, is described by the ADSP-BF53x/BF56x Blackfin Processor Programming Reference http://blackfin.uclinux.org/gf/download/frsrelease/29/2549/Blackfin_PRM.pdf The Blackfin processor is already supported by major releases of gcc, and there are binary and source rpms/tarballs for many architectures at: http://blackfin.uclinux.org/gf/project/toolchain/frs There is complete documentation, including "getting started" guides available at: http://docs.blackfin.uclinux.org/ which provides links to the sources and patches you will need in order to set up a cross-compiling environment for bfin-linux-uclibc This patch, as well as the other patches (toolchain, distribution, uClibc) are actively supported by Analog Devices Inc, at: http://blackfin.uclinux.org/ We have tested this on LTP, and our test plan (including pass/fails) can be found at: http://docs.blackfin.uclinux.org/doku.php?id=testing_the_linux_kernel [m.kozlowski@tuxland.pl: balance parenthesis in blackfin header files] Signed-off-by: Bryan Wu <bryan.wu@analog.com> Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: Aubrey Li <aubrey.li@analog.com> Signed-off-by: Jie Zhang <jie.zhang@analog.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
26 lines
706 B
C
26 lines
706 B
C
|
|
/*
|
|
* board initialization should put one of these into dev->platform_data
|
|
* and place the sl811hs onto platform_bus named "sl811-hcd".
|
|
*/
|
|
|
|
struct sl811_platform_data {
|
|
unsigned can_wakeup:1;
|
|
|
|
/* given port_power, msec/2 after power on till power good */
|
|
u8 potpg;
|
|
|
|
/* mA/2 power supplied on this port (max = default = 250) */
|
|
u8 power;
|
|
|
|
/* sl811 relies on an external source of VBUS current */
|
|
void (*port_power)(struct device *dev, int is_on);
|
|
|
|
/* pulse sl811 nRST (probably with a GPIO) */
|
|
void (*reset)(struct device *dev);
|
|
|
|
// some boards need something like these:
|
|
// int (*check_overcurrent)(struct device *dev);
|
|
// void (*clock_enable)(struct device *dev, int is_on);
|
|
};
|
|
|