Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/wireless/libertas/defs.h
Dan Williams 0bb6408777 libertas: convert PS_MODE to a direct command 
Powersave looks like it got broken at some point but we'll fix that up
when the command submission stuff is more understandable, which this
series helps to do.  That said, this patch should not further break
powersave.

Signed-off-by: Dan Williams <dcbw@redhat.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2010-07-27 15:14:12 -04:00

395 lines
12 KiB
C
Raw Blame History

/**
* This header file contains global constant/enum definitions,
* global variable declaration.
*/
#ifndef _LBS_DEFS_H_
#define _LBS_DEFS_H_
#include <linux/spinlock.h>
#ifdef CONFIG_LIBERTAS_DEBUG
#define DEBUG
#define PROC_DEBUG
#endif
#ifndef DRV_NAME
#define DRV_NAME "libertas"
#endif
#define LBS_DEB_ENTER 0x00000001
#define LBS_DEB_LEAVE 0x00000002
#define LBS_DEB_MAIN 0x00000004
#define LBS_DEB_NET 0x00000008
#define LBS_DEB_MESH 0x00000010
#define LBS_DEB_WEXT 0x00000020
#define LBS_DEB_IOCTL 0x00000040
#define LBS_DEB_SCAN 0x00000080
#define LBS_DEB_ASSOC 0x00000100
#define LBS_DEB_JOIN 0x00000200
#define LBS_DEB_11D 0x00000400
#define LBS_DEB_DEBUGFS 0x00000800
#define LBS_DEB_ETHTOOL 0x00001000
#define LBS_DEB_HOST 0x00002000
#define LBS_DEB_CMD 0x00004000
#define LBS_DEB_RX 0x00008000
#define LBS_DEB_TX 0x00010000
#define LBS_DEB_USB 0x00020000
#define LBS_DEB_CS 0x00040000
#define LBS_DEB_FW 0x00080000
#define LBS_DEB_THREAD 0x00100000
#define LBS_DEB_HEX 0x00200000
#define LBS_DEB_SDIO 0x00400000
#define LBS_DEB_SYSFS 0x00800000
#define LBS_DEB_SPI 0x01000000
#define LBS_DEB_CFG80211 0x02000000
extern unsigned int lbs_debug;
#ifdef DEBUG
#define LBS_DEB_LL(grp, grpnam, fmt, args...) \
do { if ((lbs_debug & (grp)) == (grp)) \
printk(KERN_DEBUG DRV_NAME grpnam "%s: " fmt, \
in_interrupt() ? " (INT)" : "", ## args); } while (0)
#else
#define LBS_DEB_LL(grp, grpnam, fmt, args...) do {} while (0)
#endif
#define lbs_deb_enter(grp) \
LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s()\n", __func__);
#define lbs_deb_enter_args(grp, fmt, args...) \
LBS_DEB_LL(grp | LBS_DEB_ENTER, " enter", "%s(" fmt ")\n", __func__, ## args);
#define lbs_deb_leave(grp) \
LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s()\n", __func__);
#define lbs_deb_leave_args(grp, fmt, args...) \
LBS_DEB_LL(grp | LBS_DEB_LEAVE, " leave", "%s(), " fmt "\n", \
__func__, ##args);
#define lbs_deb_main(fmt, args...) LBS_DEB_LL(LBS_DEB_MAIN, " main", fmt, ##args)
#define lbs_deb_net(fmt, args...) LBS_DEB_LL(LBS_DEB_NET, " net", fmt, ##args)
#define lbs_deb_mesh(fmt, args...) LBS_DEB_LL(LBS_DEB_MESH, " mesh", fmt, ##args)
#define lbs_deb_wext(fmt, args...) LBS_DEB_LL(LBS_DEB_WEXT, " wext", fmt, ##args)
#define lbs_deb_ioctl(fmt, args...) LBS_DEB_LL(LBS_DEB_IOCTL, " ioctl", fmt, ##args)
#define lbs_deb_scan(fmt, args...) LBS_DEB_LL(LBS_DEB_SCAN, " scan", fmt, ##args)
#define lbs_deb_assoc(fmt, args...) LBS_DEB_LL(LBS_DEB_ASSOC, " assoc", fmt, ##args)
#define lbs_deb_join(fmt, args...) LBS_DEB_LL(LBS_DEB_JOIN, " join", fmt, ##args)
#define lbs_deb_11d(fmt, args...) LBS_DEB_LL(LBS_DEB_11D, " 11d", fmt, ##args)
#define lbs_deb_debugfs(fmt, args...) LBS_DEB_LL(LBS_DEB_DEBUGFS, " debugfs", fmt, ##args)
#define lbs_deb_ethtool(fmt, args...) LBS_DEB_LL(LBS_DEB_ETHTOOL, " ethtool", fmt, ##args)
#define lbs_deb_host(fmt, args...) LBS_DEB_LL(LBS_DEB_HOST, " host", fmt, ##args)
#define lbs_deb_cmd(fmt, args...) LBS_DEB_LL(LBS_DEB_CMD, " cmd", fmt, ##args)
#define lbs_deb_rx(fmt, args...) LBS_DEB_LL(LBS_DEB_RX, " rx", fmt, ##args)
#define lbs_deb_tx(fmt, args...) LBS_DEB_LL(LBS_DEB_TX, " tx", fmt, ##args)
#define lbs_deb_fw(fmt, args...) LBS_DEB_LL(LBS_DEB_FW, " fw", fmt, ##args)
#define lbs_deb_usb(fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usb", fmt, ##args)
#define lbs_deb_usbd(dev, fmt, args...) LBS_DEB_LL(LBS_DEB_USB, " usbd", "%s:" fmt, dev_name(dev), ##args)
#define lbs_deb_cs(fmt, args...) LBS_DEB_LL(LBS_DEB_CS, " cs", fmt, ##args)
#define lbs_deb_thread(fmt, args...) LBS_DEB_LL(LBS_DEB_THREAD, " thread", fmt, ##args)
#define lbs_deb_sdio(fmt, args...) LBS_DEB_LL(LBS_DEB_SDIO, " sdio", fmt, ##args)
#define lbs_deb_sysfs(fmt, args...) LBS_DEB_LL(LBS_DEB_SYSFS, " sysfs", fmt, ##args)
#define lbs_deb_spi(fmt, args...) LBS_DEB_LL(LBS_DEB_SPI, " spi", fmt, ##args)
#define lbs_deb_cfg80211(fmt, args...) LBS_DEB_LL(LBS_DEB_CFG80211, " cfg80211", fmt, ##args)
#define lbs_pr_info(format, args...) \
printk(KERN_INFO DRV_NAME": " format, ## args)
#define lbs_pr_err(format, args...) \
printk(KERN_ERR DRV_NAME": " format, ## args)
#define lbs_pr_alert(format, args...) \
printk(KERN_ALERT DRV_NAME": " format, ## args)
#ifdef DEBUG
static inline void lbs_deb_hex(unsigned int grp, const char *prompt, u8 *buf, int len)
{
int i = 0;
if (len &&
(lbs_debug & LBS_DEB_HEX) &&
(lbs_debug & grp))
{
for (i = 1; i <= len; i++) {
if ((i & 0xf) == 1) {
if (i != 1)
printk("\n");
printk(DRV_NAME " %s: ", prompt);
}
printk("%02x ", (u8) * buf);
buf++;
}
printk("\n");
}
}
#else
#define lbs_deb_hex(grp,prompt,buf,len) do {} while (0)
#endif
/** Buffer Constants */
/* The size of SQ memory PPA, DPA are 8 DWORDs, that keep the physical
* addresses of TxPD buffers. Station has only 8 TxPD available, Whereas
* driver has more local TxPDs. Each TxPD on the host memory is associated
* with a Tx control node. The driver maintains 8 RxPD descriptors for
* station firmware to store Rx packet information.
*
* Current version of MAC has a 32x6 multicast address buffer.
*
* 802.11b can have up to 14 channels, the driver keeps the
* BSSID(MAC address) of each APs or Ad hoc stations it has sensed.
*/
#define MRVDRV_MAX_MULTICAST_LIST_SIZE 32
#define LBS_NUM_CMD_BUFFERS 10
#define LBS_CMD_BUFFER_SIZE (2 * 1024)
#define MRVDRV_MAX_CHANNEL_SIZE 14
#define MRVDRV_ASSOCIATION_TIME_OUT 255
#define MRVDRV_SNAP_HEADER_LEN 8
#define LBS_UPLD_SIZE 2312
#define DEV_NAME_LEN 32
/* Wake criteria for HOST_SLEEP_CFG command */
#define EHS_WAKE_ON_BROADCAST_DATA 0x0001
#define EHS_WAKE_ON_UNICAST_DATA 0x0002
#define EHS_WAKE_ON_MAC_EVENT 0x0004
#define EHS_WAKE_ON_MULTICAST_DATA 0x0008
#define EHS_REMOVE_WAKEUP 0xFFFFFFFF
/* Wake rules for Host_Sleep_CFG command */
#define WOL_RULE_NET_TYPE_INFRA_OR_IBSS 0x00
#define WOL_RULE_NET_TYPE_MESH 0x10
#define WOL_RULE_ADDR_TYPE_BCAST 0x01
#define WOL_RULE_ADDR_TYPE_MCAST 0x08
#define WOL_RULE_ADDR_TYPE_UCAST 0x02
#define WOL_RULE_OP_AND 0x01
#define WOL_RULE_OP_OR 0x02
#define WOL_RULE_OP_INVALID 0xFF
#define WOL_RESULT_VALID_CMD 0
#define WOL_RESULT_NOSPC_ERR 1
#define WOL_RESULT_EEXIST_ERR 2
/** Misc constants */
/* This section defines 802.11 specific contants */
#define MRVDRV_MAX_BSS_DESCRIPTS 16
#define MRVDRV_MAX_REGION_CODE 6
#define MRVDRV_DEFAULT_LISTEN_INTERVAL 10
#define MRVDRV_CHANNELS_PER_SCAN 4
#define MRVDRV_MAX_CHANNELS_PER_SCAN 14
#define MRVDRV_MIN_BEACON_INTERVAL 20
#define MRVDRV_MAX_BEACON_INTERVAL 1000
#define MRVDRV_BEACON_INTERVAL 100
#define MARVELL_MESH_IE_LENGTH 9
/* Values used to populate the struct mrvl_mesh_ie. The only time you need this
* is when enabling the mesh using CMD_MESH_CONFIG.
*/
#define MARVELL_MESH_IE_TYPE 4
#define MARVELL_MESH_IE_SUBTYPE 0
#define MARVELL_MESH_IE_VERSION 0
#define MARVELL_MESH_PROTO_ID_HWMP 0
#define MARVELL_MESH_METRIC_ID 0
#define MARVELL_MESH_CAPABILITY 0
/** INT status Bit Definition*/
#define MRVDRV_TX_DNLD_RDY 0x0001
#define MRVDRV_RX_UPLD_RDY 0x0002
#define MRVDRV_CMD_DNLD_RDY 0x0004
#define MRVDRV_CMD_UPLD_RDY 0x0008
#define MRVDRV_CARDEVENT 0x0010
/* Automatic TX control default levels */
#define POW_ADAPT_DEFAULT_P0 13
#define POW_ADAPT_DEFAULT_P1 15
#define POW_ADAPT_DEFAULT_P2 18
#define TPC_DEFAULT_P0 5
#define TPC_DEFAULT_P1 10
#define TPC_DEFAULT_P2 13
/** TxPD status */
/* Station firmware use TxPD status field to report final Tx transmit
* result, Bit masks are used to present combined situations.
*/
#define MRVDRV_TxPD_POWER_MGMT_NULL_PACKET 0x01
#define MRVDRV_TxPD_POWER_MGMT_LAST_PACKET 0x08
/** Tx mesh flag */
/* Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define TxPD_CONTROL_WDS_FRAME (1<<17)
#define TxPD_MESH_FRAME TxPD_CONTROL_WDS_FRAME
/** Mesh interface ID */
#define MESH_IFACE_ID 0x0001
/** Mesh id should be in bits 14-13-12 */
#define MESH_IFACE_BIT_OFFSET 0x000c
/** Mesh enable bit in FW capability */
#define MESH_CAPINFO_ENABLE_MASK (1<<16)
/** FW definition from Marvell v4 */
#define MRVL_FW_V4 (0x04)
/** FW definition from Marvell v5 */
#define MRVL_FW_V5 (0x05)
/** FW definition from Marvell v10 */
#define MRVL_FW_V10 (0x0a)
/** FW major revision definition */
#define MRVL_FW_MAJOR_REV(x) ((x)>>24)
/** RxPD status */
#define MRVDRV_RXPD_STATUS_OK 0x0001
/** RxPD status - Received packet types */
/** Rx mesh flag */
/* Currently we are using normal WDS flag as mesh flag.
* TODO: change to proper mesh flag when MAC understands it.
*/
#define RxPD_CONTROL_WDS_FRAME (0x40)
#define RxPD_MESH_FRAME RxPD_CONTROL_WDS_FRAME
/** RSSI-related defines */
/* RSSI constants are used to implement 802.11 RSSI threshold
* indication. if the Rx packet signal got too weak for 5 consecutive
* times, miniport driver (driver) will report this event to wrapper
*/
#define MRVDRV_NF_DEFAULT_SCAN_VALUE (-96)
/** RTS/FRAG related defines */
#define MRVDRV_RTS_MIN_VALUE 0
#define MRVDRV_RTS_MAX_VALUE 2347
#define MRVDRV_FRAG_MIN_VALUE 256
#define MRVDRV_FRAG_MAX_VALUE 2346
/* This is for firmware specific length */
#define EXTRA_LEN 36
#define MRVDRV_ETH_TX_PACKET_BUFFER_SIZE \
(ETH_FRAME_LEN + sizeof(struct txpd) + EXTRA_LEN)
#define MRVDRV_ETH_RX_PACKET_BUFFER_SIZE \
(ETH_FRAME_LEN + sizeof(struct rxpd) \
+ MRVDRV_SNAP_HEADER_LEN + EXTRA_LEN)
#define CMD_F_HOSTCMD (1 << 0)
#define FW_CAPINFO_WPA (1 << 0)
#define FW_CAPINFO_PS (1 << 1)
#define FW_CAPINFO_FIRMWARE_UPGRADE (1 << 13)
#define FW_CAPINFO_BOOT2_UPGRADE (1<<14)
#define FW_CAPINFO_PERSISTENT_CONFIG (1<<15)
#define KEY_LEN_WPA_AES 16
#define KEY_LEN_WPA_TKIP 32
#define KEY_LEN_WEP_104 13
#define KEY_LEN_WEP_40 5
#define RF_ANTENNA_1 0x1
#define RF_ANTENNA_2 0x2
#define RF_ANTENNA_AUTO 0xFFFF
#define BAND_B (0x01)
#define BAND_G (0x02)
#define ALL_802_11_BANDS (BAND_B | BAND_G)
#define MAX_RATES 14
#define MAX_LEDS 8
/** Global Variable Declaration */
extern const char lbs_driver_version[];
extern u16 lbs_region_code_to_index[MRVDRV_MAX_REGION_CODE];
/** ENUM definition*/
/** SNRNF_TYPE */
enum SNRNF_TYPE {
TYPE_BEACON = 0,
TYPE_RXPD,
MAX_TYPE_B
};
/** SNRNF_DATA*/
enum SNRNF_DATA {
TYPE_NOAVG = 0,
TYPE_AVG,
MAX_TYPE_AVG
};
/** LBS_802_11_POWER_MODE */
enum LBS_802_11_POWER_MODE {
LBS802_11POWERMODECAM,
LBS802_11POWERMODEMAX_PSP,
LBS802_11POWERMODEFAST_PSP,
/*not a real mode, defined as an upper bound */
LBS802_11POWEMODEMAX
};
/** PS_STATE */
enum PS_STATE {
PS_STATE_FULL_POWER,
PS_STATE_AWAKE,
PS_STATE_PRE_SLEEP,
PS_STATE_SLEEP
};
/** DNLD_STATE */
enum DNLD_STATE {
DNLD_RES_RECEIVED,
DNLD_DATA_SENT,
DNLD_CMD_SENT,
DNLD_BOOTCMD_SENT,
};
/** LBS_MEDIA_STATE */
enum LBS_MEDIA_STATE {
LBS_CONNECTED,
LBS_DISCONNECTED
};
/** LBS_802_11_PRIVACY_FILTER */
enum LBS_802_11_PRIVACY_FILTER {
LBS802_11PRIVFILTERACCEPTALL,
LBS802_11PRIVFILTER8021XWEP
};
/** mv_ms_type */
enum mv_ms_type {
MVMS_DAT = 0,
MVMS_CMD = 1,
MVMS_TXDONE = 2,
MVMS_EVENT
};
/** KEY_TYPE_ID */
enum KEY_TYPE_ID {
KEY_TYPE_ID_WEP = 0,
KEY_TYPE_ID_TKIP,
KEY_TYPE_ID_AES
};
/** KEY_INFO_WPA (applies to both TKIP and AES/CCMP) */
enum KEY_INFO_WPA {
KEY_INFO_WPA_MCAST = 0x01,
KEY_INFO_WPA_UNICAST = 0x02,
KEY_INFO_WPA_ENABLED = 0x04
};
/* Default values for fwt commands. */
#define FWT_DEFAULT_METRIC 0
#define FWT_DEFAULT_DIR 1
/* Default Rate, 11Mbps */
#define FWT_DEFAULT_RATE 3
#define FWT_DEFAULT_SSN 0xffffffff
#define FWT_DEFAULT_DSN 0
#define FWT_DEFAULT_HOPCOUNT 0
#define FWT_DEFAULT_TTL 0
#define FWT_DEFAULT_EXPIRATION 0
#define FWT_DEFAULT_SLEEPMODE 0
#define FWT_DEFAULT_SNR 0
#endif
Reference in a new issue View git blame Copy permalink