99b2d8df1d
The kernel uses the SIGP external call order code to signal other CPUs. When running with dedicated CPUs external calls don't get delivered immediately but within a fixed polling invervall. This can lead to delays where the system appears to do nothing. Replace the SIGP external call order with the SIGP emergency call order since this one gets delivered immediately. Signed-off-by: Martin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
781 lines
25 KiB
ArmAsm
781 lines
25 KiB
ArmAsm
/*
|
|
* arch/s390/kernel/head.S
|
|
*
|
|
* S390 version
|
|
* Copyright (C) 1999,2000 IBM Deutschland Entwicklung GmbH, IBM Corporation
|
|
* Author(s): Hartmut Penner (hp@de.ibm.com),
|
|
* Martin Schwidefsky (schwidefsky@de.ibm.com),
|
|
* Rob van der Heij (rvdhei@iae.nl)
|
|
*
|
|
* There are 5 different IPL methods
|
|
* 1) load the image directly into ram at address 0 and do an PSW restart
|
|
* 2) linload will load the image from address 0x10000 to memory 0x10000
|
|
* and start the code thru LPSW 0x0008000080010000 (VM only, deprecated)
|
|
* 3) generate the tape ipl header, store the generated image on a tape
|
|
* and ipl from it
|
|
* In case of SL tape you need to IPL 5 times to get past VOL1 etc
|
|
* 4) generate the vm reader ipl header, move the generated image to the
|
|
* VM reader (use option NOH!) and do a ipl from reader (VM only)
|
|
* 5) direct call of start by the SALIPL loader
|
|
* We use the cpuid to distinguish between VM and native ipl
|
|
* params for kernel are pushed to 0x10400 (see setup.h)
|
|
|
|
Changes:
|
|
Okt 25 2000 <rvdheij@iae.nl>
|
|
added code to skip HDR and EOF to allow SL tape IPL (5 retries)
|
|
changed first CCW from rewind to backspace block
|
|
|
|
*/
|
|
|
|
#include <linux/config.h>
|
|
#include <asm/setup.h>
|
|
#include <asm/lowcore.h>
|
|
#include <asm/offsets.h>
|
|
#include <asm/thread_info.h>
|
|
#include <asm/page.h>
|
|
|
|
#ifndef CONFIG_IPL
|
|
.org 0
|
|
.long 0x00080000,0x80000000+startup # Just a restart PSW
|
|
#else
|
|
#ifdef CONFIG_IPL_TAPE
|
|
#define IPL_BS 1024
|
|
.org 0
|
|
.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
|
|
.long 0x27000000,0x60000001 # by ipl to addresses 0-23.
|
|
.long 0x02000000,0x20000000+IPL_BS # (a PSW and two CCWs).
|
|
.long 0x00000000,0x00000000 # external old psw
|
|
.long 0x00000000,0x00000000 # svc old psw
|
|
.long 0x00000000,0x00000000 # program check old psw
|
|
.long 0x00000000,0x00000000 # machine check old psw
|
|
.long 0x00000000,0x00000000 # io old psw
|
|
.long 0x00000000,0x00000000
|
|
.long 0x00000000,0x00000000
|
|
.long 0x00000000,0x00000000
|
|
.long 0x000a0000,0x00000058 # external new psw
|
|
.long 0x000a0000,0x00000060 # svc new psw
|
|
.long 0x000a0000,0x00000068 # program check new psw
|
|
.long 0x000a0000,0x00000070 # machine check new psw
|
|
.long 0x00080000,0x80000000+.Lioint # io new psw
|
|
|
|
.org 0x100
|
|
#
|
|
# subroutine for loading from tape
|
|
# Paramters:
|
|
# R1 = device number
|
|
# R2 = load address
|
|
.Lloader:
|
|
st %r14,.Lldret
|
|
la %r3,.Lorbread # r3 = address of orb
|
|
la %r5,.Lirb # r5 = address of irb
|
|
st %r2,.Lccwread+4 # initialize CCW data addresses
|
|
lctl %c6,%c6,.Lcr6
|
|
slr %r2,%r2
|
|
.Lldlp:
|
|
la %r6,3 # 3 retries
|
|
.Lssch:
|
|
ssch 0(%r3) # load chunk of IPL_BS bytes
|
|
bnz .Llderr
|
|
.Lw4end:
|
|
bas %r14,.Lwait4io
|
|
tm 8(%r5),0x82 # do we have a problem ?
|
|
bnz .Lrecov
|
|
slr %r7,%r7
|
|
icm %r7,3,10(%r5) # get residual count
|
|
lcr %r7,%r7
|
|
la %r7,IPL_BS(%r7) # IPL_BS-residual=#bytes read
|
|
ar %r2,%r7 # add to total size
|
|
tm 8(%r5),0x01 # found a tape mark ?
|
|
bnz .Ldone
|
|
l %r0,.Lccwread+4 # update CCW data addresses
|
|
ar %r0,%r7
|
|
st %r0,.Lccwread+4
|
|
b .Lldlp
|
|
.Ldone:
|
|
l %r14,.Lldret
|
|
br %r14 # r2 contains the total size
|
|
.Lrecov:
|
|
bas %r14,.Lsense # do the sensing
|
|
bct %r6,.Lssch # dec. retry count & branch
|
|
b .Llderr
|
|
#
|
|
# Sense subroutine
|
|
#
|
|
.Lsense:
|
|
st %r14,.Lsnsret
|
|
la %r7,.Lorbsense
|
|
ssch 0(%r7) # start sense command
|
|
bnz .Llderr
|
|
bas %r14,.Lwait4io
|
|
l %r14,.Lsnsret
|
|
tm 8(%r5),0x82 # do we have a problem ?
|
|
bnz .Llderr
|
|
br %r14
|
|
#
|
|
# Wait for interrupt subroutine
|
|
#
|
|
.Lwait4io:
|
|
lpsw .Lwaitpsw
|
|
.Lioint:
|
|
c %r1,0xb8 # compare subchannel number
|
|
bne .Lwait4io
|
|
tsch 0(%r5)
|
|
slr %r0,%r0
|
|
tm 8(%r5),0x82 # do we have a problem ?
|
|
bnz .Lwtexit
|
|
tm 8(%r5),0x04 # got device end ?
|
|
bz .Lwait4io
|
|
.Lwtexit:
|
|
br %r14
|
|
.Llderr:
|
|
lpsw .Lcrash
|
|
|
|
.align 8
|
|
.Lorbread:
|
|
.long 0x00000000,0x0080ff00,.Lccwread
|
|
.align 8
|
|
.Lorbsense:
|
|
.long 0x00000000,0x0080ff00,.Lccwsense
|
|
.align 8
|
|
.Lccwread:
|
|
.long 0x02200000+IPL_BS,0x00000000
|
|
.Lccwsense:
|
|
.long 0x04200001,0x00000000
|
|
.Lwaitpsw:
|
|
.long 0x020a0000,0x80000000+.Lioint
|
|
|
|
.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
|
|
.Lcr6: .long 0xff000000
|
|
.align 8
|
|
.Lcrash:.long 0x000a0000,0x00000000
|
|
.Lldret:.long 0
|
|
.Lsnsret: .long 0
|
|
#endif /* CONFIG_IPL_TAPE */
|
|
|
|
#ifdef CONFIG_IPL_VM
|
|
#define IPL_BS 0x730
|
|
.org 0
|
|
.long 0x00080000,0x80000000+iplstart # The first 24 bytes are loaded
|
|
.long 0x02000018,0x60000050 # by ipl to addresses 0-23.
|
|
.long 0x02000068,0x60000050 # (a PSW and two CCWs).
|
|
.fill 80-24,1,0x40 # bytes 24-79 are discarded !!
|
|
.long 0x020000f0,0x60000050 # The next 160 byte are loaded
|
|
.long 0x02000140,0x60000050 # to addresses 0x18-0xb7
|
|
.long 0x02000190,0x60000050 # They form the continuation
|
|
.long 0x020001e0,0x60000050 # of the CCW program started
|
|
.long 0x02000230,0x60000050 # by ipl and load the range
|
|
.long 0x02000280,0x60000050 # 0x0f0-0x730 from the image
|
|
.long 0x020002d0,0x60000050 # to the range 0x0f0-0x730
|
|
.long 0x02000320,0x60000050 # in memory. At the end of
|
|
.long 0x02000370,0x60000050 # the channel program the PSW
|
|
.long 0x020003c0,0x60000050 # at location 0 is loaded.
|
|
.long 0x02000410,0x60000050 # Initial processing starts
|
|
.long 0x02000460,0x60000050 # at 0xf0 = iplstart.
|
|
.long 0x020004b0,0x60000050
|
|
.long 0x02000500,0x60000050
|
|
.long 0x02000550,0x60000050
|
|
.long 0x020005a0,0x60000050
|
|
.long 0x020005f0,0x60000050
|
|
.long 0x02000640,0x60000050
|
|
.long 0x02000690,0x60000050
|
|
.long 0x020006e0,0x20000050
|
|
|
|
.org 0xf0
|
|
#
|
|
# subroutine for loading cards from the reader
|
|
#
|
|
.Lloader:
|
|
la %r3,.Lorb # r2 = address of orb into r2
|
|
la %r5,.Lirb # r4 = address of irb
|
|
la %r6,.Lccws
|
|
la %r7,20
|
|
.Linit:
|
|
st %r2,4(%r6) # initialize CCW data addresses
|
|
la %r2,0x50(%r2)
|
|
la %r6,8(%r6)
|
|
bct 7,.Linit
|
|
|
|
lctl %c6,%c6,.Lcr6 # set IO subclass mask
|
|
slr %r2,%r2
|
|
.Lldlp:
|
|
ssch 0(%r3) # load chunk of 1600 bytes
|
|
bnz .Llderr
|
|
.Lwait4irq:
|
|
mvc 0x78(8),.Lnewpsw # set up IO interrupt psw
|
|
lpsw .Lwaitpsw
|
|
.Lioint:
|
|
c %r1,0xb8 # compare subchannel number
|
|
bne .Lwait4irq
|
|
tsch 0(%r5)
|
|
|
|
slr %r0,%r0
|
|
ic %r0,8(%r5) # get device status
|
|
chi %r0,8 # channel end ?
|
|
be .Lcont
|
|
chi %r0,12 # channel end + device end ?
|
|
be .Lcont
|
|
|
|
l %r0,4(%r5)
|
|
s %r0,8(%r3) # r0/8 = number of ccws executed
|
|
mhi %r0,10 # *10 = number of bytes in ccws
|
|
lh %r3,10(%r5) # get residual count
|
|
sr %r0,%r3 # #ccws*80-residual=#bytes read
|
|
ar %r2,%r0
|
|
|
|
br %r14 # r2 contains the total size
|
|
|
|
.Lcont:
|
|
ahi %r2,0x640 # add 0x640 to total size
|
|
la %r6,.Lccws
|
|
la %r7,20
|
|
.Lincr:
|
|
l %r0,4(%r6) # update CCW data addresses
|
|
ahi %r0,0x640
|
|
st %r0,4(%r6)
|
|
ahi %r6,8
|
|
bct 7,.Lincr
|
|
|
|
b .Lldlp
|
|
.Llderr:
|
|
lpsw .Lcrash
|
|
|
|
.align 8
|
|
.Lorb: .long 0x00000000,0x0080ff00,.Lccws
|
|
.Lirb: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
|
|
.Lcr6: .long 0xff000000
|
|
.Lloadp:.long 0,0
|
|
.align 8
|
|
.Lcrash:.long 0x000a0000,0x00000000
|
|
.Lnewpsw:
|
|
.long 0x00080000,0x80000000+.Lioint
|
|
.Lwaitpsw:
|
|
.long 0x020a0000,0x80000000+.Lioint
|
|
|
|
.align 8
|
|
.Lccws: .rept 19
|
|
.long 0x02600050,0x00000000
|
|
.endr
|
|
.long 0x02200050,0x00000000
|
|
#endif /* CONFIG_IPL_VM */
|
|
|
|
iplstart:
|
|
lh %r1,0xb8 # test if subchannel number
|
|
bct %r1,.Lnoload # is valid
|
|
l %r1,0xb8 # load ipl subchannel number
|
|
la %r2,IPL_BS # load start address
|
|
bas %r14,.Lloader # load rest of ipl image
|
|
larl %r12,_pstart # pointer to parameter area
|
|
st %r1,IPL_DEVICE+4-PARMAREA(%r12) # store ipl device number
|
|
|
|
#
|
|
# load parameter file from ipl device
|
|
#
|
|
.Lagain1:
|
|
l %r2,INITRD_START+4-PARMAREA(%r12)# use ramdisk location as temp
|
|
bas %r14,.Lloader # load parameter file
|
|
ltr %r2,%r2 # got anything ?
|
|
bz .Lnopf
|
|
chi %r2,895
|
|
bnh .Lnotrunc
|
|
la %r2,895
|
|
.Lnotrunc:
|
|
l %r4,INITRD_START+4-PARMAREA(%r12)
|
|
clc 0(3,%r4),.L_hdr # if it is HDRx
|
|
bz .Lagain1 # skip dataset header
|
|
clc 0(3,%r4),.L_eof # if it is EOFx
|
|
bz .Lagain1 # skip dateset trailer
|
|
la %r5,0(%r4,%r2)
|
|
lr %r3,%r2
|
|
.Lidebc:
|
|
tm 0(%r5),0x80 # high order bit set ?
|
|
bo .Ldocv # yes -> convert from EBCDIC
|
|
ahi %r5,-1
|
|
bct %r3,.Lidebc
|
|
b .Lnocv
|
|
.Ldocv:
|
|
l %r3,.Lcvtab
|
|
tr 0(256,%r4),0(%r3) # convert parameters to ascii
|
|
tr 256(256,%r4),0(%r3)
|
|
tr 512(256,%r4),0(%r3)
|
|
tr 768(122,%r4),0(%r3)
|
|
.Lnocv: la %r3,COMMAND_LINE-PARMAREA(%r12) # load adr. of command line
|
|
mvc 0(256,%r3),0(%r4)
|
|
mvc 256(256,%r3),256(%r4)
|
|
mvc 512(256,%r3),512(%r4)
|
|
mvc 768(122,%r3),768(%r4)
|
|
slr %r0,%r0
|
|
b .Lcntlp
|
|
.Ldelspc:
|
|
ic %r0,0(%r2,%r3)
|
|
chi %r0,0x20 # is it a space ?
|
|
be .Lcntlp
|
|
ahi %r2,1
|
|
b .Leolp
|
|
.Lcntlp:
|
|
brct %r2,.Ldelspc
|
|
.Leolp:
|
|
slr %r0,%r0
|
|
stc %r0,0(%r2,%r3) # terminate buffer
|
|
.Lnopf:
|
|
|
|
#
|
|
# load ramdisk from ipl device
|
|
#
|
|
.Lagain2:
|
|
l %r2,INITRD_START+4-PARMAREA(%r12)# load adr. of ramdisk
|
|
bas %r14,.Lloader # load ramdisk
|
|
st %r2,INITRD_SIZE+4-PARMAREA(%r12) # store size of ramdisk
|
|
ltr %r2,%r2
|
|
bnz .Lrdcont
|
|
st %r2,INITRD_START+4-PARMAREA(%r12)# no ramdisk found, null it
|
|
.Lrdcont:
|
|
l %r2,INITRD_START+4-PARMAREA(%r12)
|
|
clc 0(3,%r2),.L_hdr # skip HDRx and EOFx
|
|
bz .Lagain2
|
|
clc 0(3,%r2),.L_eof
|
|
bz .Lagain2
|
|
|
|
#ifdef CONFIG_IPL_VM
|
|
#
|
|
# reset files in VM reader
|
|
#
|
|
stidp __LC_CPUID # store cpuid
|
|
tm __LC_CPUID,0xff # running VM ?
|
|
bno .Lnoreset
|
|
la %r2,.Lreset
|
|
lhi %r3,26
|
|
diag %r2,%r3,8
|
|
mvc 0x78(8),.Lrdrnewpsw # set up IO interrupt psw
|
|
.Lwaitrdrirq:
|
|
lpsw .Lrdrwaitpsw
|
|
.Lrdrint:
|
|
c %r1,0xb8 # compare subchannel number
|
|
bne .Lwaitrdrirq
|
|
la %r5,.Lirb
|
|
tsch 0(%r5)
|
|
.Lnoreset:
|
|
b .Lnoload
|
|
|
|
.align 8
|
|
.Lrdrnewpsw:
|
|
.long 0x00080000,0x80000000+.Lrdrint
|
|
.Lrdrwaitpsw:
|
|
.long 0x020a0000,0x80000000+.Lrdrint
|
|
#endif
|
|
|
|
#
|
|
# everything loaded, go for it
|
|
#
|
|
.Lnoload:
|
|
l %r1,.Lstartup
|
|
br %r1
|
|
|
|
.Lstartup: .long startup
|
|
.Lcvtab:.long _ebcasc # ebcdic to ascii table
|
|
.Lreset:.byte 0xc3,0xc8,0xc1,0xd5,0xc7,0xc5,0x40,0xd9,0xc4,0xd9,0x40
|
|
.byte 0xc1,0xd3,0xd3,0x40,0xd2,0xc5,0xc5,0xd7,0x40,0xd5,0xd6
|
|
.byte 0xc8,0xd6,0xd3,0xc4 # "change rdr all keep nohold"
|
|
.L_eof: .long 0xc5d6c600 /* C'EOF' */
|
|
.L_hdr: .long 0xc8c4d900 /* C'HDR' */
|
|
#endif /* CONFIG_IPL */
|
|
|
|
#
|
|
# SALIPL loader support. Based on a patch by Rob van der Heij.
|
|
# This entry point is called directly from the SALIPL loader and
|
|
# doesn't need a builtin ipl record.
|
|
#
|
|
.org 0x800
|
|
.globl start
|
|
start:
|
|
stm %r0,%r15,0x07b0 # store registers
|
|
basr %r12,%r0
|
|
.base:
|
|
l %r11,.parm
|
|
l %r8,.cmd # pointer to command buffer
|
|
|
|
ltr %r9,%r9 # do we have SALIPL parameters?
|
|
bp .sk8x8
|
|
|
|
mvc 0(64,%r8),0x00b0 # copy saved registers
|
|
xc 64(240-64,%r8),0(%r8) # remainder of buffer
|
|
tr 0(64,%r8),.lowcase
|
|
b .gotr
|
|
.sk8x8:
|
|
mvc 0(240,%r8),0(%r9) # copy iplparms into buffer
|
|
.gotr:
|
|
l %r10,.tbl # EBCDIC to ASCII table
|
|
tr 0(240,%r8),0(%r10)
|
|
stidp __LC_CPUID # Are we running on VM maybe
|
|
cli __LC_CPUID,0xff
|
|
bnz .test
|
|
.long 0x83300060 # diag 3,0,x'0060' - storage size
|
|
b .done
|
|
.test:
|
|
mvc 0x68(8),.pgmnw # set up pgm check handler
|
|
l %r2,.fourmeg
|
|
lr %r3,%r2
|
|
bctr %r3,%r0 # 4M-1
|
|
.loop: iske %r0,%r3
|
|
ar %r3,%r2
|
|
.pgmx:
|
|
sr %r3,%r2
|
|
la %r3,1(%r3)
|
|
.done:
|
|
l %r1,.memsize
|
|
st %r3,4(%r1)
|
|
slr %r0,%r0
|
|
st %r0,INITRD_SIZE+4-PARMAREA(%r11)
|
|
st %r0,INITRD_START+4-PARMAREA(%r11)
|
|
j startup # continue with startup
|
|
.tbl: .long _ebcasc # translate table
|
|
.cmd: .long COMMAND_LINE # address of command line buffer
|
|
.parm: .long PARMAREA
|
|
.fourmeg: .long 0x00400000 # 4M
|
|
.pgmnw: .long 0x00080000,.pgmx
|
|
.memsize: .long memory_size
|
|
.lowcase:
|
|
.byte 0x00,0x01,0x02,0x03,0x04,0x05,0x06,0x07
|
|
.byte 0x08,0x09,0x0a,0x0b,0x0c,0x0d,0x0e,0x0f
|
|
.byte 0x10,0x11,0x12,0x13,0x14,0x15,0x16,0x17
|
|
.byte 0x18,0x19,0x1a,0x1b,0x1c,0x1d,0x1e,0x1f
|
|
.byte 0x20,0x21,0x22,0x23,0x24,0x25,0x26,0x27
|
|
.byte 0x28,0x29,0x2a,0x2b,0x2c,0x2d,0x2e,0x2f
|
|
.byte 0x30,0x31,0x32,0x33,0x34,0x35,0x36,0x37
|
|
.byte 0x38,0x39,0x3a,0x3b,0x3c,0x3d,0x3e,0x3f
|
|
.byte 0x40,0x41,0x42,0x43,0x44,0x45,0x46,0x47
|
|
.byte 0x48,0x49,0x4a,0x4b,0x4c,0x4d,0x4e,0x4f
|
|
.byte 0x50,0x51,0x52,0x53,0x54,0x55,0x56,0x57
|
|
.byte 0x58,0x59,0x5a,0x5b,0x5c,0x5d,0x5e,0x5f
|
|
.byte 0x60,0x61,0x62,0x63,0x64,0x65,0x66,0x67
|
|
.byte 0x68,0x69,0x6a,0x6b,0x6c,0x6d,0x6e,0x6f
|
|
.byte 0x70,0x71,0x72,0x73,0x74,0x75,0x76,0x77
|
|
.byte 0x78,0x79,0x7a,0x7b,0x7c,0x7d,0x7e,0x7f
|
|
|
|
.byte 0x80,0x81,0x82,0x83,0x84,0x85,0x86,0x87
|
|
.byte 0x88,0x89,0x8a,0x8b,0x8c,0x8d,0x8e,0x8f
|
|
.byte 0x90,0x91,0x92,0x93,0x94,0x95,0x96,0x97
|
|
.byte 0x98,0x99,0x9a,0x9b,0x9c,0x9d,0x9e,0x9f
|
|
.byte 0xa0,0xa1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7
|
|
.byte 0xa8,0xa9,0xaa,0xab,0xac,0xad,0xae,0xaf
|
|
.byte 0xb0,0xb1,0xb2,0xb3,0xb4,0xb5,0xb6,0xb7
|
|
.byte 0xb8,0xb9,0xba,0xbb,0xbc,0xbd,0xbe,0xbf
|
|
.byte 0xc0,0x81,0x82,0x83,0x84,0x85,0x86,0x87 # .abcdefg
|
|
.byte 0x88,0x89,0xca,0xcb,0xcc,0xcd,0xce,0xcf # hi
|
|
.byte 0xd0,0x91,0x92,0x93,0x94,0x95,0x96,0x97 # .jklmnop
|
|
.byte 0x98,0x99,0xda,0xdb,0xdc,0xdd,0xde,0xdf # qr
|
|
.byte 0xe0,0xe1,0xa2,0xa3,0xa4,0xa5,0xa6,0xa7 # ..stuvwx
|
|
.byte 0xa8,0xa9,0xea,0xeb,0xec,0xed,0xee,0xef # yz
|
|
.byte 0xf0,0xf1,0xf2,0xf3,0xf4,0xf5,0xf6,0xf7
|
|
.byte 0xf8,0xf9,0xfa,0xfb,0xfc,0xfd,0xfe,0xff
|
|
|
|
#
|
|
# startup-code at 0x10000, running in real mode
|
|
# this is called either by the ipl loader or directly by PSW restart
|
|
# or linload or SALIPL
|
|
#
|
|
.org 0x10000
|
|
startup:basr %r13,0 # get base
|
|
.LPG1: sll %r13,1 # remove high order bit
|
|
srl %r13,1
|
|
lhi %r1,1 # mode 1 = esame
|
|
slr %r0,%r0 # set cpuid to zero
|
|
sigp %r1,%r0,0x12 # switch to esame mode
|
|
sam64 # switch to 64 bit mode
|
|
lctlg %c0,%c15,.Lctl-.LPG1(%r13) # load control registers
|
|
larl %r12,_pstart # pointer to parameter area
|
|
# move IPL device to lowcore
|
|
mvc __LC_IPLDEV(4),IPL_DEVICE+4-PARMAREA(%r12)
|
|
|
|
#
|
|
# clear bss memory
|
|
#
|
|
larl %r2,__bss_start # start of bss segment
|
|
larl %r3,_end # end of bss segment
|
|
sgr %r3,%r2 # length of bss
|
|
sgr %r4,%r4 #
|
|
sgr %r5,%r5 # set src,length and pad to zero
|
|
mvcle %r2,%r4,0 # clear mem
|
|
jo .-4 # branch back, if not finish
|
|
|
|
l %r2,.Lrcp-.LPG1(%r13) # Read SCP forced command word
|
|
.Lservicecall:
|
|
stosm .Lpmask-.LPG1(%r13),0x01 # authorize ext interrupts
|
|
|
|
stctg %r0,%r0,.Lcr-.LPG1(%r13) # get cr0
|
|
la %r1,0x200 # set bit 22
|
|
og %r1,.Lcr-.LPG1(%r13) # or old cr0 with r1
|
|
stg %r1,.Lcr-.LPG1(%r13)
|
|
lctlg %r0,%r0,.Lcr-.LPG1(%r13) # load modified cr0
|
|
|
|
mvc __LC_EXT_NEW_PSW(8),.Lpcmsk-.LPG1(%r13) # set postcall psw
|
|
larl %r1,.Lsclph
|
|
stg %r1,__LC_EXT_NEW_PSW+8 # set handler
|
|
|
|
larl %r4,_pstart # %r4 is our index for sccb stuff
|
|
la %r1,.Lsccb-PARMAREA(%r4) # our sccb
|
|
.insn rre,0xb2200000,%r2,%r1 # service call
|
|
ipm %r1
|
|
srl %r1,28 # get cc code
|
|
xr %r3,%r3
|
|
chi %r1,3
|
|
be .Lfchunk-.LPG1(%r13) # leave
|
|
chi %r1,2
|
|
be .Lservicecall-.LPG1(%r13)
|
|
lpsw .Lwaitsclp-.LPG1(%r13)
|
|
.Lsclph:
|
|
lh %r1,.Lsccbr-PARMAREA(%r4)
|
|
chi %r1,0x10 # 0x0010 is the sucess code
|
|
je .Lprocsccb # let's process the sccb
|
|
chi %r1,0x1f0
|
|
bne .Lfchunk-.LPG1(%r13) # unhandled error code
|
|
c %r2,.Lrcp-.LPG1(%r13) # Did we try Read SCP forced
|
|
bne .Lfchunk-.LPG1(%r13) # if no, give up
|
|
l %r2,.Lrcp2-.LPG1(%r13) # try with Read SCP
|
|
b .Lservicecall-.LPG1(%r13)
|
|
.Lprocsccb:
|
|
lghi %r1,0
|
|
icm %r1,3,.Lscpincr1-PARMAREA(%r4) # use this one if != 0
|
|
jnz .Lscnd
|
|
lg %r1,.Lscpincr2-PARMAREA(%r4) # otherwise use this one
|
|
.Lscnd:
|
|
xr %r3,%r3 # same logic
|
|
ic %r3,.Lscpa1-PARMAREA(%r4)
|
|
chi %r3,0x00
|
|
jne .Lcompmem
|
|
l %r3,.Lscpa2-PARMAREA(%r13)
|
|
.Lcompmem:
|
|
mlgr %r2,%r1 # mem in MB on 128-bit
|
|
l %r1,.Lonemb-.LPG1(%r13)
|
|
mlgr %r2,%r1 # mem size in bytes in %r3
|
|
b .Lfchunk-.LPG1(%r13)
|
|
|
|
.Lpmask:
|
|
.byte 0
|
|
.align 8
|
|
.Lcr:
|
|
.quad 0x00 # place holder for cr0
|
|
.Lwaitsclp:
|
|
.long 0x020A0000
|
|
.quad .Lsclph
|
|
.Lrcp:
|
|
.int 0x00120001 # Read SCP forced code
|
|
.Lrcp2:
|
|
.int 0x00020001 # Read SCP code
|
|
.Lonemb:
|
|
.int 0x100000
|
|
|
|
.Lfchunk:
|
|
# set program check new psw mask
|
|
mvc __LC_PGM_NEW_PSW(8),.Lpcmsk-.LPG1(%r13)
|
|
|
|
#
|
|
# find memory chunks.
|
|
#
|
|
lgr %r9,%r3 # end of mem
|
|
larl %r1,.Lchkmem # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
la %r1,1 # test in increments of 128KB
|
|
sllg %r1,%r1,17
|
|
larl %r3,memory_chunk
|
|
slgr %r4,%r4 # set start of chunk to zero
|
|
slgr %r5,%r5 # set end of chunk to zero
|
|
slr %r6,%r6 # set access code to zero
|
|
la %r10,MEMORY_CHUNKS # number of chunks
|
|
.Lloop:
|
|
tprot 0(%r5),0 # test protection of first byte
|
|
ipm %r7
|
|
srl %r7,28
|
|
clr %r6,%r7 # compare cc with last access code
|
|
je .Lsame
|
|
j .Lchkmem
|
|
.Lsame:
|
|
algr %r5,%r1 # add 128KB to end of chunk
|
|
# no need to check here,
|
|
brc 12,.Lloop # this is the same chunk
|
|
.Lchkmem: # > 16EB or tprot got a program check
|
|
clgr %r4,%r5 # chunk size > 0?
|
|
je .Lchkloop
|
|
stg %r4,0(%r3) # store start address of chunk
|
|
lgr %r0,%r5
|
|
slgr %r0,%r4
|
|
stg %r0,8(%r3) # store size of chunk
|
|
st %r6,20(%r3) # store type of chunk
|
|
la %r3,24(%r3)
|
|
larl %r8,memory_size
|
|
stg %r5,0(%r8) # store memory size
|
|
ahi %r10,-1 # update chunk number
|
|
.Lchkloop:
|
|
lr %r6,%r7 # set access code to last cc
|
|
# we got an exception or we're starting a new
|
|
# chunk , we must check if we should
|
|
# still try to find valid memory (if we detected
|
|
# the amount of available storage), and if we
|
|
# have chunks left
|
|
lghi %r4,1
|
|
sllg %r4,%r4,31
|
|
clgr %r5,%r4
|
|
je .Lhsaskip
|
|
xr %r0, %r0
|
|
clgr %r0, %r9 # did we detect memory?
|
|
je .Ldonemem # if not, leave
|
|
chi %r10, 0 # do we have chunks left?
|
|
je .Ldonemem
|
|
.Lhsaskip:
|
|
algr %r5,%r1 # add 128KB to end of chunk
|
|
lgr %r4,%r5 # potential new chunk
|
|
clgr %r5,%r9 # should we go on?
|
|
jl .Lloop
|
|
.Ldonemem:
|
|
|
|
larl %r12,machine_flags
|
|
#
|
|
# find out if we are running under VM
|
|
#
|
|
stidp __LC_CPUID # store cpuid
|
|
tm __LC_CPUID,0xff # running under VM ?
|
|
bno 0f-.LPG1(%r13)
|
|
oi 7(%r12),1 # set VM flag
|
|
0: lh %r0,__LC_CPUID+4 # get cpu version
|
|
chi %r0,0x7490 # running on a P/390 ?
|
|
bne 1f-.LPG1(%r13)
|
|
oi 7(%r12),4 # set P/390 flag
|
|
1:
|
|
|
|
#
|
|
# find out if we have the MVPG instruction
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
sgr %r0,%r0
|
|
lghi %r1,0
|
|
lghi %r2,0
|
|
mvpg %r1,%r2 # test MVPG instruction
|
|
oi 7(%r12),16 # set MVPG flag
|
|
0:
|
|
|
|
#
|
|
# find out if the diag 0x44 works in 64 bit mode
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
diag 0,0,0x44 # test diag 0x44
|
|
oi 7(%r12),32 # set diag44 flag
|
|
0:
|
|
|
|
#
|
|
# find out if we have the IDTE instruction
|
|
#
|
|
la %r1,0f-.LPG1(%r13) # set program check address
|
|
stg %r1,__LC_PGM_NEW_PSW+8
|
|
.long 0xb2b10000 # store facility list
|
|
tm 0xc8,0x08 # check bit for clearing-by-ASCE
|
|
bno 0f-.LPG1(%r13)
|
|
lhi %r1,2094
|
|
lhi %r2,0
|
|
.long 0xb98e2001
|
|
oi 7(%r12),0x80 # set IDTE flag
|
|
0:
|
|
|
|
lpswe .Lentry-.LPG1(13) # jump to _stext in primary-space,
|
|
# virtual and never return ...
|
|
.align 16
|
|
.Lentry:.quad 0x0000000180000000,_stext
|
|
.Lctl: .quad 0x04b50002 # cr0: various things
|
|
.quad 0 # cr1: primary space segment table
|
|
.quad .Lduct # cr2: dispatchable unit control table
|
|
.quad 0 # cr3: instruction authorization
|
|
.quad 0 # cr4: instruction authorization
|
|
.quad 0xffffffffffffffff # cr5: primary-aste origin
|
|
.quad 0 # cr6: I/O interrupts
|
|
.quad 0 # cr7: secondary space segment table
|
|
.quad 0 # cr8: access registers translation
|
|
.quad 0 # cr9: tracing off
|
|
.quad 0 # cr10: tracing off
|
|
.quad 0 # cr11: tracing off
|
|
.quad 0 # cr12: tracing off
|
|
.quad 0 # cr13: home space segment table
|
|
.quad 0xc0000000 # cr14: machine check handling off
|
|
.quad 0 # cr15: linkage stack operations
|
|
.Lpcmsk:.quad 0x0000000180000000
|
|
.L4malign:.quad 0xffffffffffc00000
|
|
.Lscan2g:.quad 0x80000000 + 0x20000 - 8 # 2GB + 128K - 8
|
|
.Lnop: .long 0x07000700
|
|
|
|
.org PARMAREA-64
|
|
.Lduct: .long 0,0,0,0,0,0,0,0
|
|
.long 0,0,0,0,0,0,0,0
|
|
|
|
#
|
|
# params at 10400 (setup.h)
|
|
#
|
|
.org PARMAREA
|
|
.global _pstart
|
|
_pstart:
|
|
.quad 0 # IPL_DEVICE
|
|
.quad RAMDISK_ORIGIN # INITRD_START
|
|
.quad RAMDISK_SIZE # INITRD_SIZE
|
|
|
|
.org COMMAND_LINE
|
|
.byte "root=/dev/ram0 ro"
|
|
.byte 0
|
|
.org 0x11000
|
|
.Lsccb:
|
|
.hword 0x1000 # length, one page
|
|
.byte 0x00,0x00,0x00
|
|
.byte 0x80 # variable response bit set
|
|
.Lsccbr:
|
|
.hword 0x00 # response code
|
|
.Lscpincr1:
|
|
.hword 0x00
|
|
.Lscpa1:
|
|
.byte 0x00
|
|
.fill 89,1,0
|
|
.Lscpa2:
|
|
.int 0x00
|
|
.Lscpincr2:
|
|
.quad 0x00
|
|
.fill 3984,1,0
|
|
.org 0x12000
|
|
.global _pend
|
|
_pend:
|
|
|
|
#ifdef CONFIG_SHARED_KERNEL
|
|
.org 0x100000
|
|
#endif
|
|
|
|
#
|
|
# startup-code, running in virtual mode
|
|
#
|
|
.globl _stext
|
|
_stext: basr %r13,0 # get base
|
|
.LPG2:
|
|
#
|
|
# Setup stack
|
|
#
|
|
larl %r15,init_thread_union
|
|
lg %r14,__TI_task(%r15) # cache current in lowcore
|
|
stg %r14,__LC_CURRENT
|
|
aghi %r15,1<<(PAGE_SHIFT+THREAD_ORDER) # init_task_union + THREAD_SIZE
|
|
stg %r15,__LC_KERNEL_STACK # set end of kernel stack
|
|
aghi %r15,-160
|
|
xc __SF_BACKCHAIN(4,%r15),__SF_BACKCHAIN(%r15) # clear backchain
|
|
|
|
# check control registers
|
|
stctg %c0,%c15,0(%r15)
|
|
oi 6(%r15),0x40 # enable sigp emergency signal
|
|
oi 4(%r15),0x10 # switch on low address proctection
|
|
lctlg %c0,%c15,0(%r15)
|
|
|
|
#
|
|
lam 0,15,.Laregs-.LPG2(%r13) # load access regs needed by uaccess
|
|
brasl %r14,start_kernel # go to C code
|
|
#
|
|
# We returned from start_kernel ?!? PANIK
|
|
#
|
|
basr %r13,0
|
|
lpswe .Ldw-.(%r13) # load disabled wait psw
|
|
#
|
|
.align 8
|
|
.Ldw: .quad 0x0002000180000000,0x0000000000000000
|
|
.Laregs: .long 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
|
|
|