dabc69c242
I get the following warning: ------------[ cut here ]------------ WARNING: at drivers/gpio/gpiolib.c:1559 __gpio_get_value+0x90/0x98() Modules linked in: Call Trace: [<ffffffff81440950>] dump_stack+0x8/0x34 [<ffffffff81141478>] warn_slowpath_common+0x78/0xa0 [<ffffffff812f0958>] __gpio_get_value+0x90/0x98 [<ffffffff81434f04>] create_gpio_led+0xdc/0x194 [<ffffffff8143524c>] gpio_led_probe+0x290/0x36c [<ffffffff8130e8b0>] driver_probe_device+0x78/0x1b0 [<ffffffff8130eaa8>] __driver_attach+0xc0/0xc8 [<ffffffff8130d7ac>] bus_for_each_dev+0x64/0xb0 [<ffffffff8130e130>] bus_add_driver+0x1c8/0x2a8 [<ffffffff8130f100>] driver_register+0x90/0x180 [<ffffffff81100438>] do_one_initcall+0x38/0x160 ---[ end trace ee38723fbefcd65c ]--- My GPIOs are on an I2C port expander, so we must use the *_cansleep() variant of the GPIO functions. This is was not being done in create_gpio_led(). We can change gpio_get_value() to gpio_get_value_cansleep() because it is only called from the platform_driver probe function, which is a context where we can sleep. Only tested on my gpio_cansleep() system, but it seems safe for all systems. Signed-off-by: David Daney <david.daney@cavium.com> Cc: Richard Purdie <rpurdie@rpsys.net> Acked-by: Trent Piepho <tpiepho@gmail.com> Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
312 lines
7.6 KiB
C
312 lines
7.6 KiB
C
/*
|
|
* LEDs driver for GPIOs
|
|
*
|
|
* Copyright (C) 2007 8D Technologies inc.
|
|
* Raphael Assenat <raph@8d.com>
|
|
* Copyright (C) 2008 Freescale Semiconductor, Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/leds.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
#include <asm/gpio.h>
|
|
|
|
struct gpio_led_data {
|
|
struct led_classdev cdev;
|
|
unsigned gpio;
|
|
struct work_struct work;
|
|
u8 new_level;
|
|
u8 can_sleep;
|
|
u8 active_low;
|
|
u8 blinking;
|
|
int (*platform_gpio_blink_set)(unsigned gpio, int state,
|
|
unsigned long *delay_on, unsigned long *delay_off);
|
|
};
|
|
|
|
static void gpio_led_work(struct work_struct *work)
|
|
{
|
|
struct gpio_led_data *led_dat =
|
|
container_of(work, struct gpio_led_data, work);
|
|
|
|
if (led_dat->blinking) {
|
|
led_dat->platform_gpio_blink_set(led_dat->gpio,
|
|
led_dat->new_level,
|
|
NULL, NULL);
|
|
led_dat->blinking = 0;
|
|
} else
|
|
gpio_set_value_cansleep(led_dat->gpio, led_dat->new_level);
|
|
}
|
|
|
|
static void gpio_led_set(struct led_classdev *led_cdev,
|
|
enum led_brightness value)
|
|
{
|
|
struct gpio_led_data *led_dat =
|
|
container_of(led_cdev, struct gpio_led_data, cdev);
|
|
int level;
|
|
|
|
if (value == LED_OFF)
|
|
level = 0;
|
|
else
|
|
level = 1;
|
|
|
|
if (led_dat->active_low)
|
|
level = !level;
|
|
|
|
/* Setting GPIOs with I2C/etc requires a task context, and we don't
|
|
* seem to have a reliable way to know if we're already in one; so
|
|
* let's just assume the worst.
|
|
*/
|
|
if (led_dat->can_sleep) {
|
|
led_dat->new_level = level;
|
|
schedule_work(&led_dat->work);
|
|
} else {
|
|
if (led_dat->blinking) {
|
|
led_dat->platform_gpio_blink_set(led_dat->gpio, level,
|
|
NULL, NULL);
|
|
led_dat->blinking = 0;
|
|
} else
|
|
gpio_set_value(led_dat->gpio, level);
|
|
}
|
|
}
|
|
|
|
static int gpio_blink_set(struct led_classdev *led_cdev,
|
|
unsigned long *delay_on, unsigned long *delay_off)
|
|
{
|
|
struct gpio_led_data *led_dat =
|
|
container_of(led_cdev, struct gpio_led_data, cdev);
|
|
|
|
led_dat->blinking = 1;
|
|
return led_dat->platform_gpio_blink_set(led_dat->gpio, GPIO_LED_BLINK,
|
|
delay_on, delay_off);
|
|
}
|
|
|
|
static int __devinit create_gpio_led(const struct gpio_led *template,
|
|
struct gpio_led_data *led_dat, struct device *parent,
|
|
int (*blink_set)(unsigned, int, unsigned long *, unsigned long *))
|
|
{
|
|
int ret, state;
|
|
|
|
led_dat->gpio = -1;
|
|
|
|
/* skip leds that aren't available */
|
|
if (!gpio_is_valid(template->gpio)) {
|
|
printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
|
|
template->gpio, template->name);
|
|
return 0;
|
|
}
|
|
|
|
ret = gpio_request(template->gpio, template->name);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
led_dat->cdev.name = template->name;
|
|
led_dat->cdev.default_trigger = template->default_trigger;
|
|
led_dat->gpio = template->gpio;
|
|
led_dat->can_sleep = gpio_cansleep(template->gpio);
|
|
led_dat->active_low = template->active_low;
|
|
led_dat->blinking = 0;
|
|
if (blink_set) {
|
|
led_dat->platform_gpio_blink_set = blink_set;
|
|
led_dat->cdev.blink_set = gpio_blink_set;
|
|
}
|
|
led_dat->cdev.brightness_set = gpio_led_set;
|
|
if (template->default_state == LEDS_GPIO_DEFSTATE_KEEP)
|
|
state = !!gpio_get_value_cansleep(led_dat->gpio) ^ led_dat->active_low;
|
|
else
|
|
state = (template->default_state == LEDS_GPIO_DEFSTATE_ON);
|
|
led_dat->cdev.brightness = state ? LED_FULL : LED_OFF;
|
|
if (!template->retain_state_suspended)
|
|
led_dat->cdev.flags |= LED_CORE_SUSPENDRESUME;
|
|
|
|
ret = gpio_direction_output(led_dat->gpio, led_dat->active_low ^ state);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
INIT_WORK(&led_dat->work, gpio_led_work);
|
|
|
|
ret = led_classdev_register(parent, &led_dat->cdev);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
return 0;
|
|
err:
|
|
gpio_free(led_dat->gpio);
|
|
return ret;
|
|
}
|
|
|
|
static void delete_gpio_led(struct gpio_led_data *led)
|
|
{
|
|
if (!gpio_is_valid(led->gpio))
|
|
return;
|
|
led_classdev_unregister(&led->cdev);
|
|
cancel_work_sync(&led->work);
|
|
gpio_free(led->gpio);
|
|
}
|
|
|
|
struct gpio_leds_priv {
|
|
int num_leds;
|
|
struct gpio_led_data leds[];
|
|
};
|
|
|
|
static inline int sizeof_gpio_leds_priv(int num_leds)
|
|
{
|
|
return sizeof(struct gpio_leds_priv) +
|
|
(sizeof(struct gpio_led_data) * num_leds);
|
|
}
|
|
|
|
/* Code to create from OpenFirmware platform devices */
|
|
#ifdef CONFIG_OF_GPIO
|
|
static struct gpio_leds_priv * __devinit gpio_leds_create_of(struct platform_device *pdev)
|
|
{
|
|
struct device_node *np = pdev->dev.of_node, *child;
|
|
struct gpio_leds_priv *priv;
|
|
int count = 0, ret;
|
|
|
|
/* count LEDs in this device, so we know how much to allocate */
|
|
for_each_child_of_node(np, child)
|
|
count++;
|
|
if (!count)
|
|
return NULL;
|
|
|
|
priv = kzalloc(sizeof_gpio_leds_priv(count), GFP_KERNEL);
|
|
if (!priv)
|
|
return NULL;
|
|
|
|
for_each_child_of_node(np, child) {
|
|
struct gpio_led led = {};
|
|
enum of_gpio_flags flags;
|
|
const char *state;
|
|
|
|
led.gpio = of_get_gpio_flags(child, 0, &flags);
|
|
led.active_low = flags & OF_GPIO_ACTIVE_LOW;
|
|
led.name = of_get_property(child, "label", NULL) ? : child->name;
|
|
led.default_trigger =
|
|
of_get_property(child, "linux,default-trigger", NULL);
|
|
state = of_get_property(child, "default-state", NULL);
|
|
if (state) {
|
|
if (!strcmp(state, "keep"))
|
|
led.default_state = LEDS_GPIO_DEFSTATE_KEEP;
|
|
else if (!strcmp(state, "on"))
|
|
led.default_state = LEDS_GPIO_DEFSTATE_ON;
|
|
else
|
|
led.default_state = LEDS_GPIO_DEFSTATE_OFF;
|
|
}
|
|
|
|
ret = create_gpio_led(&led, &priv->leds[priv->num_leds++],
|
|
&pdev->dev, NULL);
|
|
if (ret < 0) {
|
|
of_node_put(child);
|
|
goto err;
|
|
}
|
|
}
|
|
|
|
return priv;
|
|
|
|
err:
|
|
for (count = priv->num_leds - 2; count >= 0; count--)
|
|
delete_gpio_led(&priv->leds[count]);
|
|
kfree(priv);
|
|
return NULL;
|
|
}
|
|
|
|
static const struct of_device_id of_gpio_leds_match[] = {
|
|
{ .compatible = "gpio-leds", },
|
|
{},
|
|
};
|
|
#else /* CONFIG_OF_GPIO */
|
|
static struct gpio_leds_priv * __devinit gpio_leds_create_of(struct platform_device *pdev)
|
|
{
|
|
return NULL;
|
|
}
|
|
#define of_gpio_leds_match NULL
|
|
#endif /* CONFIG_OF_GPIO */
|
|
|
|
|
|
static int __devinit gpio_led_probe(struct platform_device *pdev)
|
|
{
|
|
struct gpio_led_platform_data *pdata = pdev->dev.platform_data;
|
|
struct gpio_leds_priv *priv;
|
|
int i, ret = 0;
|
|
|
|
if (pdata && pdata->num_leds) {
|
|
priv = kzalloc(sizeof_gpio_leds_priv(pdata->num_leds),
|
|
GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
priv->num_leds = pdata->num_leds;
|
|
for (i = 0; i < priv->num_leds; i++) {
|
|
ret = create_gpio_led(&pdata->leds[i],
|
|
&priv->leds[i],
|
|
&pdev->dev, pdata->gpio_blink_set);
|
|
if (ret < 0) {
|
|
/* On failure: unwind the led creations */
|
|
for (i = i - 1; i >= 0; i--)
|
|
delete_gpio_led(&priv->leds[i]);
|
|
kfree(priv);
|
|
return ret;
|
|
}
|
|
}
|
|
} else {
|
|
priv = gpio_leds_create_of(pdev);
|
|
if (!priv)
|
|
return -ENODEV;
|
|
}
|
|
|
|
platform_set_drvdata(pdev, priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __devexit gpio_led_remove(struct platform_device *pdev)
|
|
{
|
|
struct gpio_leds_priv *priv = dev_get_drvdata(&pdev->dev);
|
|
int i;
|
|
|
|
for (i = 0; i < priv->num_leds; i++)
|
|
delete_gpio_led(&priv->leds[i]);
|
|
|
|
dev_set_drvdata(&pdev->dev, NULL);
|
|
kfree(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct platform_driver gpio_led_driver = {
|
|
.probe = gpio_led_probe,
|
|
.remove = __devexit_p(gpio_led_remove),
|
|
.driver = {
|
|
.name = "leds-gpio",
|
|
.owner = THIS_MODULE,
|
|
.of_match_table = of_gpio_leds_match,
|
|
},
|
|
};
|
|
|
|
MODULE_ALIAS("platform:leds-gpio");
|
|
|
|
static int __init gpio_led_init(void)
|
|
{
|
|
return platform_driver_register(&gpio_led_driver);
|
|
}
|
|
|
|
static void __exit gpio_led_exit(void)
|
|
{
|
|
platform_driver_unregister(&gpio_led_driver);
|
|
}
|
|
|
|
module_init(gpio_led_init);
|
|
module_exit(gpio_led_exit);
|
|
|
|
MODULE_AUTHOR("Raphael Assenat <raph@8d.com>, Trent Piepho <tpiepho@freescale.com>");
|
|
MODULE_DESCRIPTION("GPIO LED driver");
|
|
MODULE_LICENSE("GPL");
|