Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/sh/kernel/entry.S
Paul Mundt 6ae5e8d759 sh: Fix kGDB NMI handling. 
in_nmi shifted down a few labels, so we were inadvertently
clearing the lower byte of do_syscall_trace, badness ensues.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2006-09-27 11:37:33 +09:00

840 lines
17 KiB
ArmAsm
Raw Blame History

/* $Id: entry.S,v 1.37 2004/06/11 13:02:46 doyu Exp $
*
* linux/arch/sh/entry.S
*
* Copyright (C) 1999, 2000, 2002 Niibe Yutaka
* Copyright (C) 2003 Paul Mundt
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
*/
#include <linux/sys.h>
#include <linux/linkage.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/cpu/mmu_context.h>
#include <asm/unistd.h>
#if !defined(CONFIG_NFSD) && !defined(CONFIG_NFSD_MODULE)
#define sys_nfsservctl sys_ni_syscall
#endif
#if !defined(CONFIG_MMU)
#define sys_madvise sys_ni_syscall
#define sys_readahead sys_ni_syscall
#define sys_mprotect sys_ni_syscall
#define sys_msync sys_ni_syscall
#define sys_mlock sys_ni_syscall
#define sys_munlock sys_ni_syscall
#define sys_mlockall sys_ni_syscall
#define sys_munlockall sys_ni_syscall
#define sys_mremap sys_ni_syscall
#define sys_mincore sys_ni_syscall
#define sys_remap_file_pages sys_ni_syscall
#endif
! NOTE:
! GNU as (as of 2.9.1) changes bf/s into bt/s and bra, when the address
! to be jumped is too far, but it causes illegal slot exception.
/*
* entry.S contains the system-call and fault low-level handling routines.
* This also contains the timer-interrupt handler, as well as all interrupts
* and faults that can result in a task-switch.
*
* NOTE: This code handles signal-recognition, which happens every time
* after a timer-interrupt and after each system call.
*
* NOTE: This code uses a convention that instructions in the delay slot
* of a transfer-control instruction are indented by an extra space, thus:
*
* jmp @k0 ! control-transfer instruction
* ldc k1, ssr ! delay slot
*
* Stack layout in 'ret_from_syscall':
* ptrace needs to have all regs on the stack.
* if the order here is changed, it needs to be
* updated in ptrace.c and ptrace.h
*
* r0
* ...
* r15 = stack pointer
* spc
* pr
* ssr
* gbr
* mach
* macl
* syscall #
*
*/
ENOSYS = 38
EINVAL = 22
#if defined(CONFIG_KGDB_NMI)
NMI_VEC = 0x1c0 ! Must catch early for debounce
#endif
/* Offsets to the stack */
OFF_R0 = 0 /* Return value. New ABI also arg4 */
OFF_R1 = 4 /* New ABI: arg5 */
OFF_R2 = 8 /* New ABI: arg6 */
OFF_R3 = 12 /* New ABI: syscall_nr */
OFF_R4 = 16 /* New ABI: arg0 */
OFF_R5 = 20 /* New ABI: arg1 */
OFF_R6 = 24 /* New ABI: arg2 */
OFF_R7 = 28 /* New ABI: arg3 */
OFF_SP = (15*4)
OFF_PC = (16*4)
OFF_SR = (16*4+8)
OFF_TRA = (16*4+6*4)
#define k0 r0
#define k1 r1
#define k2 r2
#define k3 r3
#define k4 r4
#define k_ex_code r2_bank /* r2_bank1 */
#define g_imask r6 /* r6_bank1 */
#define k_g_imask r6_bank /* r6_bank1 */
#define current r7 /* r7_bank1 */
/*
* Kernel mode register usage:
* k0 scratch
* k1 scratch
* k2 scratch (Exception code)
* k3 scratch (Return address)
* k4 scratch
* k5 reserved
* k6 Global Interrupt Mask (0--15 << 4)
* k7 CURRENT_THREAD_INFO (pointer to current thread info)
*/
!
! TLB Miss / Initial Page write exception handling
! _and_
! TLB hits, but the access violate the protection.
! It can be valid access, such as stack grow and/or C-O-W.
!
!
! Find the pmd/pte entry and loadtlb
! If it's not found, cause address error (SEGV)
!
! Although this could be written in assembly language (and it'd be faster),
! this first version depends *much* on C implementation.
!
#define CLI() \
stc sr, r0; \
or #0xf0, r0; \
ldc r0, sr
#define STI() \
mov.l __INV_IMASK, r11; \
stc sr, r10; \
and r11, r10; \
stc k_g_imask, r11; \
or r11, r10; \
ldc r10, sr
#if defined(CONFIG_PREEMPT)
# define preempt_stop() CLI()
#else
# define preempt_stop()
# define resume_kernel restore_all
#endif
#if defined(CONFIG_MMU)
.align 2
ENTRY(tlb_miss_load)
bra call_dpf
mov #0, r5
.align 2
ENTRY(tlb_miss_store)
bra call_dpf
mov #1, r5
.align 2
ENTRY(initial_page_write)
bra call_dpf
mov #1, r5
.align 2
ENTRY(tlb_protection_violation_load)
bra call_dpf
mov #0, r5
.align 2
ENTRY(tlb_protection_violation_store)
bra call_dpf
mov #1, r5
call_dpf:
mov.l 1f, r0
mov r5, r8
mov.l @r0, r6
mov r6, r9
mov.l 2f, r0
sts pr, r10
jsr @r0
mov r15, r4
!
tst r0, r0
bf/s 0f
lds r10, pr
rts
nop
0: STI()
mov.l 3f, r0
mov r9, r6
mov r8, r5
jmp @r0
mov r15, r4
.align 2
1: .long MMU_TEA
2: .long __do_page_fault
3: .long do_page_fault
.align 2
ENTRY(address_error_load)
bra call_dae
mov #0,r5 ! writeaccess = 0
.align 2
ENTRY(address_error_store)
bra call_dae
mov #1,r5 ! writeaccess = 1
.align 2
call_dae:
mov.l 1f, r0
mov.l @r0, r6 ! address
mov.l 2f, r0
jmp @r0
mov r15, r4 ! regs
.align 2
1: .long MMU_TEA
2: .long do_address_error
#endif /* CONFIG_MMU */
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
! Handle kernel debug if either kgdb (SW) or gdb-stub (FW) is present.
! If both are configured, handle the debug traps (breakpoints) in SW,
! but still allow BIOS traps to FW.
.align 2
debug_kernel:
#if defined(CONFIG_SH_STANDARD_BIOS) && defined(CONFIG_SH_KGDB)
/* Force BIOS call to FW (debug_trap put TRA in r8) */
mov r8,r0
shlr2 r0
cmp/eq #0x3f,r0
bt debug_kernel_fw
#endif /* CONFIG_SH_STANDARD_BIOS && CONFIG_SH_KGDB */
debug_enter:
#if defined(CONFIG_SH_KGDB)
/* Jump to kgdb, pass stacked regs as arg */
debug_kernel_sw:
mov.l 3f, r0
jmp @r0
mov r15, r4
.align 2
3: .long kgdb_handle_exception
#endif /* CONFIG_SH_KGDB */
#if defined(CONFIG_SH_STANDARD_BIOS)
/* Unwind the stack and jmp to the debug entry */
debug_kernel_fw:
mov.l @r15+, r0
mov.l @r15+, r1
mov.l @r15+, r2
mov.l @r15+, r3
mov.l @r15+, r4
mov.l @r15+, r5
mov.l @r15+, r6
mov.l @r15+, r7
stc sr, r8
mov.l 1f, r9 ! BL =1, RB=1, IMASK=0x0F
or r9, r8
ldc r8, sr ! here, change the register bank
mov.l @r15+, r8
mov.l @r15+, r9
mov.l @r15+, r10
mov.l @r15+, r11
mov.l @r15+, r12
mov.l @r15+, r13
mov.l @r15+, r14
mov.l @r15+, k0
ldc.l @r15+, spc
lds.l @r15+, pr
mov.l @r15+, k1
ldc.l @r15+, gbr
lds.l @r15+, mach
lds.l @r15+, macl
mov k0, r15
!
mov.l 2f, k0
mov.l @k0, k0
jmp @k0
ldc k1, ssr
.align 2
1: .long 0x300000f0
2: .long gdb_vbr_vector
#endif /* CONFIG_SH_STANDARD_BIOS */
#endif /* CONFIG_SH_STANDARD_BIOS || CONFIG_SH_KGDB */
.align 2
debug_trap:
#if defined(CONFIG_SH_STANDARD_BIOS) || defined(CONFIG_SH_KGDB)
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shll r0
shll r0 ! kernel space?
bt/s debug_kernel
#endif
mov.l @r15, r0 ! Restore R0 value
mov.l 1f, r8
jmp @r8
nop
.align 2
ENTRY(exception_error)
!
STI()
mov.l 2f, r0
jmp @r0
nop
!
.align 2
1: .long break_point_trap_software
2: .long do_exception_error
.align 2
ret_from_exception:
preempt_stop()
ret_from_irq:
!
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
shll r0
shll r0 ! kernel space?
bt/s resume_kernel ! Yes, it's from kernel, go back soon
GET_THREAD_INFO(r8)
#ifdef CONFIG_PREEMPT
bra resume_userspace
nop
ENTRY(resume_kernel)
mov.l @(TI_PRE_COUNT,r8), r0 ! current_thread_info->preempt_count
tst r0, r0
bf noresched
need_resched:
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_NEED_RESCHED, r0 ! need_resched set?
bt noresched
mov #OFF_SR, r0
mov.l @(r0,r15), r0 ! get status register
and #0xf0, r0 ! interrupts off (exception path)?
cmp/eq #0xf0, r0
bt noresched
mov.l 1f, r0
mov.l r0, @(TI_PRE_COUNT,r8)
STI()
mov.l 2f, r0
jsr @r0
nop
mov #0, r0
mov.l r0, @(TI_PRE_COUNT,r8)
CLI()
bra need_resched
nop
noresched:
bra restore_all
nop
.align 2
1: .long PREEMPT_ACTIVE
2: .long schedule
#endif
ENTRY(resume_userspace)
! r8: current_thread_info
CLI()
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_WORK_MASK, r0
bt/s restore_all
tst #_TIF_NEED_RESCHED, r0
.align 2
work_pending:
! r0: current_thread_info->flags
! r8: current_thread_info
! t: result of "tst #_TIF_NEED_RESCHED, r0"
bf/s work_resched
tst #_TIF_SIGPENDING, r0
work_notifysig:
bt/s restore_all
mov r15, r4
mov #0, r5
mov.l 2f, r1
mova restore_all, r0
jmp @r1
lds r0, pr
work_resched:
#ifndef CONFIG_PREEMPT
! gUSA handling
mov.l @(OFF_SP,r15), r0 ! get user space stack pointer
mov r0, r1
shll r0
bf/s 1f
shll r0
bf/s 1f
mov #OFF_PC, r0
! SP >= 0xc0000000 : gUSA mark
mov.l @(r0,r15), r2 ! get user space PC (program counter)
mov.l @(OFF_R0,r15), r3 ! end point
cmp/hs r3, r2 ! r2 >= r3?
bt 1f
add r3, r1 ! rewind point #2
mov.l r1, @(r0,r15) ! reset PC to rewind point #2
!
1:
#endif
mov.l 1f, r1
jsr @r1 ! schedule
nop
CLI()
!
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_WORK_MASK, r0
bt restore_all
bra work_pending
tst #_TIF_NEED_RESCHED, r0
.align 2
1: .long schedule
2: .long do_signal
.align 2
syscall_exit_work:
! r0: current_thread_info->flags
! r8: current_thread_info
tst #_TIF_SYSCALL_TRACE, r0
bt/s work_pending
tst #_TIF_NEED_RESCHED, r0
STI()
! XXX setup arguments...
mov.l 4f, r0 ! do_syscall_trace
jsr @r0
nop
bra resume_userspace
nop
.align 2
syscall_trace_entry:
! Yes it is traced.
! XXX setup arguments...
mov.l 4f, r11 ! Call do_syscall_trace which notifies
jsr @r11 ! superior (will chomp R[0-7])
nop
! Reload R0-R4 from kernel stack, where the
! parent may have modified them using
! ptrace(POKEUSR). (Note that R0-R2 are
! used by the system call handler directly
! from the kernel stack anyway, so don't need
! to be reloaded here.) This allows the parent
! to rewrite system calls and args on the fly.
mov.l @(OFF_R4,r15), r4 ! arg0
mov.l @(OFF_R5,r15), r5
mov.l @(OFF_R6,r15), r6
mov.l @(OFF_R7,r15), r7 ! arg3
mov.l @(OFF_R3,r15), r3 ! syscall_nr
! Arrange for do_syscall_trace to be called
! again as the system call returns.
mov.l 2f, r10 ! Number of syscalls
cmp/hs r10, r3
bf syscall_call
mov #-ENOSYS, r0
bra syscall_exit
mov.l r0, @(OFF_R0,r15) ! Return value
/*
* Syscall interface:
*
* Syscall #: R3
* Arguments #0 to #3: R4--R7
* Arguments #4 to #6: R0, R1, R2
* TRA: (number of arguments + 0x10) x 4
*
* This code also handles delegating other traps to the BIOS/gdb stub
* according to:
*
* Trap number
* (TRA>>2) Purpose
* -------- -------
* 0x0-0xf old syscall ABI
* 0x10-0x1f new syscall ABI
* 0x20-0xff delegated through debug_trap to BIOS/gdb stub.
*
* Note: When we're first called, the TRA value must be shifted
* right 2 bits in order to get the value that was used as the "trapa"
* argument.
*/
.align 2
.globl ret_from_fork
ret_from_fork:
mov.l 1f, r8
jsr @r8
mov r0, r4
bra syscall_exit
nop
.align 2
1: .long schedule_tail
!
ENTRY(system_call)
mov.l 1f, r9
mov.l @r9, r8 ! Read from TRA (Trap Address) Register
!
! Is the trap argument >= 0x20? (TRA will be >= 0x80)
mov #0x7f, r9
cmp/hi r9, r8
bt/s 0f
mov #OFF_TRA, r9
add r15, r9
!
mov.l r8, @r9 ! set TRA value to tra
STI()
! Call the system call handler through the table.
! First check for bad syscall number
mov r3, r9
mov.l 2f, r8 ! Number of syscalls
cmp/hs r8, r9
bf/s good_system_call
GET_THREAD_INFO(r8)
syscall_badsys: ! Bad syscall number
mov #-ENOSYS, r0
bra resume_userspace
mov.l r0, @(OFF_R0,r15) ! Return value
!
0:
bra debug_trap
nop
!
good_system_call: ! Good syscall number
mov.l @(TI_FLAGS,r8), r8
mov #_TIF_SYSCALL_TRACE, r10
tst r10, r8
bf syscall_trace_entry
!
syscall_call:
shll2 r9 ! x4
mov.l 3f, r8 ! Load the address of sys_call_table
add r8, r9
mov.l @r9, r8
jsr @r8 ! jump to specific syscall handler
nop
mov.l r0, @(OFF_R0,r15) ! save the return value
!
syscall_exit:
CLI()
!
GET_THREAD_INFO(r8)
mov.l @(TI_FLAGS,r8), r0 ! current_thread_info->flags
tst #_TIF_ALLWORK_MASK, r0
bf syscall_exit_work
restore_all:
mov.l @r15+, r0
mov.l @r15+, r1
mov.l @r15+, r2
mov.l @r15+, r3
mov.l @r15+, r4
mov.l @r15+, r5
mov.l @r15+, r6
mov.l @r15+, r7
!
stc sr, r8
mov.l 7f, r9
or r9, r8 ! BL =1, RB=1
ldc r8, sr ! here, change the register bank
!
mov.l @r15+, r8
mov.l @r15+, r9
mov.l @r15+, r10
mov.l @r15+, r11
mov.l @r15+, r12
mov.l @r15+, r13
mov.l @r15+, r14
mov.l @r15+, k4 ! original stack pointer
ldc.l @r15+, spc
lds.l @r15+, pr
mov.l @r15+, k3 ! original SR
ldc.l @r15+, gbr
lds.l @r15+, mach
lds.l @r15+, macl
add #4, r15 ! Skip syscall number
!
#ifdef CONFIG_SH_DSP
mov.l @r15+, k0 ! DSP mode marker
mov.l 5f, k1
cmp/eq k0, k1 ! Do we have a DSP stack frame?
bf skip_restore
stc sr, k0 ! Enable CPU DSP mode
or k1, k0 ! (within kernel it may be disabled)
ldc k0, sr
mov r2, k0 ! Backup r2
! Restore DSP registers from stack
mov r15, r2
movs.l @r2+, a1
movs.l @r2+, a0g
movs.l @r2+, a1g
movs.l @r2+, m0
movs.l @r2+, m1
mov r2, r15
lds.l @r15+, a0
lds.l @r15+, x0
lds.l @r15+, x1
lds.l @r15+, y0
lds.l @r15+, y1
lds.l @r15+, dsr
ldc.l @r15+, rs
ldc.l @r15+, re
ldc.l @r15+, mod
mov k0, r2 ! Restore r2
skip_restore:
#endif
!
! Calculate new SR value
mov k3, k2 ! original SR value
mov.l 9f, k1
and k1, k2 ! Mask orignal SR value
!
mov k3, k0 ! Calculate IMASK-bits
shlr2 k0
and #0x3c, k0
cmp/eq #0x3c, k0
bt/s 6f
shll2 k0
mov g_imask, k0
!
6: or k0, k2 ! Set the IMASK-bits
ldc k2, ssr
!
#if defined(CONFIG_KGDB_NMI)
! Clear in_nmi
mov.l 6f, k0
mov #0, k1
mov.b k1, @k0
#endif
mov.l @r15+, k2 ! restore EXPEVT
mov k4, r15
rte
nop
.align 2
1: .long TRA
2: .long NR_syscalls
3: .long sys_call_table
4: .long do_syscall_trace
5: .long 0x00001000 ! DSP
7: .long 0x30000000
9:
__INV_IMASK:
.long 0xffffff0f ! ~(IMASK)
! Exception Vector Base
!
! Should be aligned page boundary.
!
.balign 4096,0,4096
ENTRY(vbr_base)
.long 0
!
.balign 256,0,256
general_exception:
mov.l 1f, k2
mov.l 2f, k3
bra handle_exception
mov.l @k2, k2
.align 2
1: .long EXPEVT
2: .long ret_from_exception
!
!
.balign 1024,0,1024
tlb_miss:
mov.l 1f, k2
mov.l 4f, k3
bra handle_exception
mov.l @k2, k2
!
.balign 512,0,512
interrupt:
mov.l 2f, k2
mov.l 3f, k3
#if defined(CONFIG_KGDB_NMI)
! Debounce (filter nested NMI)
mov.l @k2, k0
mov.l 5f, k1
cmp/eq k1, k0
bf 0f
mov.l 6f, k1
tas.b @k1
bt 0f
rte
nop
.align 2
5: .long NMI_VEC
6: .long in_nmi
0:
#endif /* defined(CONFIG_KGDB_NMI) */
bra handle_exception
mov.l @k2, k2
.align 2
1: .long EXPEVT
2: .long INTEVT
3: .long ret_from_irq
4: .long ret_from_exception
!
!
.align 2
handle_exception:
! Using k0, k1 for scratch registers (r0_bank1, r1_bank),
! save all registers onto stack.
!
stc ssr, k0 ! Is it from kernel space?
shll k0 ! Check MD bit (bit30) by shifting it into...
shll k0 ! ...the T bit
bt/s 1f ! It's a kernel to kernel transition.
mov r15, k0 ! save original stack to k0
/* User space to kernel */
mov #0x20, k1
shll8 k1 ! k1 := 8192 (== THREAD_SIZE)
add current, k1
mov k1, r15 ! change to kernel stack
!
1: mov #-1, k4
mov.l 2f, k1
!
#ifdef CONFIG_SH_DSP
mov.l r2, @-r15 ! Save r2, we need another reg
stc sr, k4
mov.l 1f, r2
tst r2, k4 ! Check if in DSP mode
mov.l @r15+, r2 ! Restore r2 now
bt/s skip_save
mov #0, k4 ! Set marker for no stack frame
mov r2, k4 ! Backup r2 (in k4) for later
! Save DSP registers on stack
stc.l mod, @-r15
stc.l re, @-r15
stc.l rs, @-r15
sts.l dsr, @-r15
sts.l y1, @-r15
sts.l y0, @-r15
sts.l x1, @-r15
sts.l x0, @-r15
sts.l a0, @-r15
! GAS is broken, does not generate correct "movs.l Ds,@-As" instr.
! FIXME: Make sure that this is still the case with newer toolchains,
! as we're not at all interested in supporting ancient toolchains at
! this point. -- PFM.
mov r15, r2
.word 0xf653 ! movs.l a1, @-r2
.word 0xf6f3 ! movs.l a0g, @-r2
.word 0xf6d3 ! movs.l a1g, @-r2
.word 0xf6c3 ! movs.l m0, @-r2
.word 0xf6e3 ! movs.l m1, @-r2
mov r2, r15
mov k4, r2 ! Restore r2
mov.l 1f, k4 ! Force DSP stack frame
skip_save:
mov.l k4, @-r15 ! Push DSP mode marker onto stack
#endif
! Save the user registers on the stack.
mov.l k2, @-r15 ! EXPEVT
mov.l k4, @-r15 ! set TRA (default: -1)
!
sts.l macl, @-r15
sts.l mach, @-r15
stc.l gbr, @-r15
stc.l ssr, @-r15
sts.l pr, @-r15
stc.l spc, @-r15
!
lds k3, pr ! Set the return address to pr
!
mov.l k0, @-r15 ! save orignal stack
mov.l r14, @-r15
mov.l r13, @-r15
mov.l r12, @-r15
mov.l r11, @-r15
mov.l r10, @-r15
mov.l r9, @-r15
mov.l r8, @-r15
!
stc sr, r8 ! Back to normal register bank, and
or k1, r8 ! Block all interrupts
mov.l 3f, k1
and k1, r8 ! ...
ldc r8, sr ! ...changed here.
!
mov.l r7, @-r15
mov.l r6, @-r15
mov.l r5, @-r15
mov.l r4, @-r15
mov.l r3, @-r15
mov.l r2, @-r15
mov.l r1, @-r15
mov.l r0, @-r15
! Then, dispatch to the handler, according to the exception code.
stc k_ex_code, r8
shlr2 r8
shlr r8
mov.l 4f, r9
add r8, r9
mov.l @r9, r9
jmp @r9
nop
.align 2
1: .long 0x00001000 ! DSP=1
2: .long 0x000080f0 ! FD=1, IMASK=15
3: .long 0xcfffffff ! RB=0, BL=0
4: .long exception_handling_table
.align 2
ENTRY(exception_none)
rts
nop
Reference in a new issue View git blame Copy permalink