kernel-fxtec-pro1x/include/asm-ppc/pci-bridge.h
Benjamin Herrenschmidt 396a1a5832 [POWERPC] Fix mmap of PCI resource with hack for X
The powerpc version of pci_resource_to_user() and associated hooks
used by /proc/bus/pci and /sys/bus/pci mmap have been broken for some
time on machines that don't have a 1:1 mapping of devices (basically
on non-PowerMacs) and have PCI devices above 32 bits.

This attempts to fix it as well as possible.

The rule is supposed to be that pci_resource_to_user() always converts
the resources back into a BAR values since that's what the /proc
interface was supposed to deal with. However, for X to work on
platforms where PCI MMIO is not mapped 1:1, it became a habit of
platforms like powerpc to pass "fixed up" values there since X expects
to be able to use values from /proc/bus/pci/devices as offsets to mmap
of /dev/mem...

So we keep that contraption here, causing also /sys/*/resource to
expose fully absolute MMIO addresses instead of BAR values, which is
ugly, but should still work as long as those are only used to calculate
alignment within a page.

X is still broken when built 32 bits on machines where PCI MMIO can be
above 32-bit space unfortunately.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>
2006-12-08 17:21:06 +11:00

151 lines
4.5 KiB
C

#ifdef __KERNEL__
#ifndef _ASM_PCI_BRIDGE_H
#define _ASM_PCI_BRIDGE_H
#include <linux/ioport.h>
#include <linux/pci.h>
struct device_node;
struct pci_controller;
/*
* pci_io_base returns the memory address at which you can access
* the I/O space for PCI bus number `bus' (or NULL on error).
*/
extern void __iomem *pci_bus_io_base(unsigned int bus);
extern unsigned long pci_bus_io_base_phys(unsigned int bus);
extern unsigned long pci_bus_mem_base_phys(unsigned int bus);
/* Allocate a new PCI host bridge structure */
extern struct pci_controller* pcibios_alloc_controller(void);
/* Helper function for setting up resources */
extern void pci_init_resource(struct resource *res, resource_size_t start,
resource_size_t end, int flags, char *name);
/* Get the PCI host controller for a bus */
extern struct pci_controller* pci_bus_to_hose(int bus);
/* Get the PCI host controller for an OF device */
extern struct pci_controller*
pci_find_hose_for_OF_device(struct device_node* node);
/* Fill up host controller resources from the OF node */
extern void
pci_process_bridge_OF_ranges(struct pci_controller *hose,
struct device_node *dev, int primary);
/*
* Structure of a PCI controller (host bridge)
*/
struct pci_controller {
int index; /* PCI domain number */
struct pci_controller *next;
struct pci_bus *bus;
void *arch_data;
struct device *parent;
int first_busno;
int last_busno;
int bus_offset;
void __iomem *io_base_virt;
resource_size_t io_base_phys;
/* Some machines (PReP) have a non 1:1 mapping of
* the PCI memory space in the CPU bus space
*/
resource_size_t pci_mem_offset;
struct pci_ops *ops;
volatile unsigned int __iomem *cfg_addr;
volatile void __iomem *cfg_data;
/*
* If set, indirect method will set the cfg_type bit as
* needed to generate type 1 configuration transactions.
*/
int set_cfg_type;
/* Currently, we limit ourselves to 1 IO range and 3 mem
* ranges since the common pci_bus structure can't handle more
*/
struct resource io_resource;
struct resource mem_resources[3];
int mem_resource_count;
/* Host bridge I/O and Memory space
* Used for BAR placement algorithms
*/
struct resource io_space;
struct resource mem_space;
};
static inline struct pci_controller *pci_bus_to_host(struct pci_bus *bus)
{
return bus->sysdata;
}
/* These are used for config access before all the PCI probing
has been done. */
int early_read_config_byte(struct pci_controller *hose, int bus, int dev_fn,
int where, u8 *val);
int early_read_config_word(struct pci_controller *hose, int bus, int dev_fn,
int where, u16 *val);
int early_read_config_dword(struct pci_controller *hose, int bus, int dev_fn,
int where, u32 *val);
int early_write_config_byte(struct pci_controller *hose, int bus, int dev_fn,
int where, u8 val);
int early_write_config_word(struct pci_controller *hose, int bus, int dev_fn,
int where, u16 val);
int early_write_config_dword(struct pci_controller *hose, int bus, int dev_fn,
int where, u32 val);
extern void setup_indirect_pci_nomap(struct pci_controller* hose,
void __iomem *cfg_addr, void __iomem *cfg_data);
extern void setup_indirect_pci(struct pci_controller* hose,
u32 cfg_addr, u32 cfg_data);
extern void setup_grackle(struct pci_controller *hose);
extern unsigned char common_swizzle(struct pci_dev *, unsigned char *);
/*
* The following code swizzles for exactly one bridge. The routine
* common_swizzle below handles multiple bridges. But there are a
* some boards that don't follow the PCI spec's suggestion so we
* break this piece out separately.
*/
static inline unsigned char bridge_swizzle(unsigned char pin,
unsigned char idsel)
{
return (((pin-1) + idsel) % 4) + 1;
}
/*
* The following macro is used to lookup irqs in a standard table
* format for those PPC systems that do not already have PCI
* interrupts properly routed.
*/
/* FIXME - double check this */
#define PCI_IRQ_TABLE_LOOKUP \
({ long _ctl_ = -1; \
if (idsel >= min_idsel && idsel <= max_idsel && pin <= irqs_per_slot) \
_ctl_ = pci_irq_table[idsel - min_idsel][pin-1]; \
_ctl_; })
/*
* Scan the buses below a given PCI host bridge and assign suitable
* resources to all devices found.
*/
extern int pciauto_bus_scan(struct pci_controller *, int);
#ifdef CONFIG_PCI
extern unsigned long pci_address_to_pio(phys_addr_t address);
#else
static inline unsigned long pci_address_to_pio(phys_addr_t address)
{
return (unsigned long)-1;
}
#endif
#endif
#endif /* __KERNEL__ */