Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/net/wireless/rtl818x/rtl8187_leds.c
Herton Ronaldo Krzesinski 49d7590ce4 rtl8187: add radio led and fix warnings on suspend 
Michael Buesch reports that his rtl8187 gives warnings on suspend
("queueing ieee80211 work while going to suspend" warnings), as rtl8187
can call ieee80211_queue_delayed_work after mac80211 is suspended.

This change enhances rtl8187 led code so we can avoid queuing work after
mac80211 is suspended: now we register a radio led and make additional
checks to ensure led is off/on properly as mac80211 wants.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-12-10 16:09:51 -05:00

245 lines
6.4 KiB
C
Raw Blame History

/*
* Linux LED driver for RTL8187
*
* Copyright 2009 Larry Finger <Larry.Finger@lwfinger.net>
*
* Based on the LED handling in the r8187 driver, which is:
* Copyright (c) Realtek Semiconductor Corp. All rights reserved.
*
* Thanks to Realtek for their support!
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifdef CONFIG_RTL8187_LEDS
#include <net/mac80211.h>
#include <linux/usb.h>
#include <linux/eeprom_93cx6.h>
#include "rtl8187.h"
#include "rtl8187_leds.h"
static void led_turn_on(struct work_struct *work)
{
/* As this routine does read/write operations on the hardware, it must
* be run from a work queue.
*/
u8 reg;
struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
led_on.work);
struct rtl8187_led *led = &priv->led_tx;
/* Don't change the LED, when the device is down. */
if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
return ;
/* Skip if the LED is not registered. */
if (!led->dev)
return;
mutex_lock(&priv->conf_mutex);
switch (led->ledpin) {
case LED_PIN_GPIO0:
rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x00);
break;
case LED_PIN_LED0:
reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 4);
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
break;
case LED_PIN_LED1:
reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) & ~(1 << 5);
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
break;
case LED_PIN_HW:
default:
break;
}
mutex_unlock(&priv->conf_mutex);
}
static void led_turn_off(struct work_struct *work)
{
/* As this routine does read/write operations on the hardware, it must
* be run from a work queue.
*/
u8 reg;
struct rtl8187_priv *priv = container_of(work, struct rtl8187_priv,
led_off.work);
struct rtl8187_led *led = &priv->led_tx;
/* Don't change the LED, when the device is down. */
if (priv->mode == NL80211_IFTYPE_UNSPECIFIED)
return ;
/* Skip if the LED is not registered. */
if (!led->dev)
return;
mutex_lock(&priv->conf_mutex);
switch (led->ledpin) {
case LED_PIN_GPIO0:
rtl818x_iowrite8(priv, &priv->map->GPIO0, 0x01);
rtl818x_iowrite8(priv, &priv->map->GP_ENABLE, 0x01);
break;
case LED_PIN_LED0:
reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 4);
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
break;
case LED_PIN_LED1:
reg = rtl818x_ioread8(priv, &priv->map->PGSELECT) | (1 << 5);
rtl818x_iowrite8(priv, &priv->map->PGSELECT, reg);
break;
case LED_PIN_HW:
default:
break;
}
mutex_unlock(&priv->conf_mutex);
}
/* Callback from the LED subsystem. */
static void rtl8187_led_brightness_set(struct led_classdev *led_dev,
enum led_brightness brightness)
{
struct rtl8187_led *led = container_of(led_dev, struct rtl8187_led,
led_dev);
struct ieee80211_hw *hw = led->dev;
struct rtl8187_priv *priv;
static bool radio_on;
if (!hw)
return;
priv = hw->priv;
if (led->is_radio) {
if (brightness == LED_FULL) {
ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
radio_on = true;
} else if (radio_on) {
radio_on = false;
cancel_delayed_work_sync(&priv->led_on);
ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
}
} else if (radio_on) {
if (brightness == LED_OFF) {
ieee80211_queue_delayed_work(hw, &priv->led_off, 0);
/* The LED is off for 1/20 sec - it just blinks. */
ieee80211_queue_delayed_work(hw, &priv->led_on,
HZ / 20);
} else
ieee80211_queue_delayed_work(hw, &priv->led_on, 0);
}
}
static int rtl8187_register_led(struct ieee80211_hw *dev,
struct rtl8187_led *led, const char *name,
const char *default_trigger, u8 ledpin,
bool is_radio)
{
int err;
struct rtl8187_priv *priv = dev->priv;
if (led->dev)
return -EEXIST;
if (!default_trigger)
return -EINVAL;
led->dev = dev;
led->ledpin = ledpin;
led->is_radio = is_radio;
strncpy(led->name, name, sizeof(led->name));
led->led_dev.name = led->name;
led->led_dev.default_trigger = default_trigger;
led->led_dev.brightness_set = rtl8187_led_brightness_set;
err = led_classdev_register(&priv->udev->dev, &led->led_dev);
if (err) {
printk(KERN_INFO "LEDs: Failed to register %s\n", name);
led->dev = NULL;
return err;
}
return 0;
}
static void rtl8187_unregister_led(struct rtl8187_led *led)
{
struct ieee80211_hw *hw = led->dev;
struct rtl8187_priv *priv = hw->priv;
led_classdev_unregister(&led->led_dev);
flush_delayed_work(&priv->led_off);
led->dev = NULL;
}
void rtl8187_leds_init(struct ieee80211_hw *dev, u16 custid)
{
struct rtl8187_priv *priv = dev->priv;
char name[RTL8187_LED_MAX_NAME_LEN + 1];
u8 ledpin;
int err;
/* According to the vendor driver, the LED operation depends on the
* customer ID encoded in the EEPROM
*/
printk(KERN_INFO "rtl8187: Customer ID is 0x%02X\n", custid);
switch (custid) {
case EEPROM_CID_RSVD0:
case EEPROM_CID_RSVD1:
case EEPROM_CID_SERCOMM_PS:
case EEPROM_CID_QMI:
case EEPROM_CID_DELL:
case EEPROM_CID_TOSHIBA:
ledpin = LED_PIN_GPIO0;
break;
case EEPROM_CID_ALPHA0:
ledpin = LED_PIN_LED0;
break;
case EEPROM_CID_HW:
ledpin = LED_PIN_HW;
break;
default:
ledpin = LED_PIN_GPIO0;
}
INIT_DELAYED_WORK(&priv->led_on, led_turn_on);
INIT_DELAYED_WORK(&priv->led_off, led_turn_off);
snprintf(name, sizeof(name),
"rtl8187-%s::radio", wiphy_name(dev->wiphy));
err = rtl8187_register_led(dev, &priv->led_radio, name,
ieee80211_get_radio_led_name(dev), ledpin, true);
if (err)
return;
snprintf(name, sizeof(name),
"rtl8187-%s::tx", wiphy_name(dev->wiphy));
err = rtl8187_register_led(dev, &priv->led_tx, name,
ieee80211_get_tx_led_name(dev), ledpin, false);
if (err)
goto err_tx;
snprintf(name, sizeof(name),
"rtl8187-%s::rx", wiphy_name(dev->wiphy));
err = rtl8187_register_led(dev, &priv->led_rx, name,
ieee80211_get_rx_led_name(dev), ledpin, false);
if (!err)
return;
/* registration of RX LED failed - unregister */
rtl8187_unregister_led(&priv->led_tx);
err_tx:
rtl8187_unregister_led(&priv->led_radio);
}
void rtl8187_leds_exit(struct ieee80211_hw *dev)
{
struct rtl8187_priv *priv = dev->priv;
rtl8187_unregister_led(&priv->led_radio);
rtl8187_unregister_led(&priv->led_rx);
rtl8187_unregister_led(&priv->led_tx);
cancel_delayed_work_sync(&priv->led_off);
cancel_delayed_work_sync(&priv->led_on);
}
#endif /* def CONFIG_RTL8187_LED */
Reference in a new issue View git blame Copy permalink