kernel-fxtec-pro1x/arch/arm/mach-omap1
Cory Maccarrone 490a566522 omap1: mmc: Add platform init for omap7xx
The MMC mux pins normally used by omap chips in devices.c
are different from what is needed by omap7xx chips.  This
change adds a conditional around the mux setup code to
enable the correct mux pins.

The omap730 and omap850 both use a different clock for the "fck"
clock of the MMC interface than other omap processors based on the
SOFT_REQ_REG, pin 12.  The "ick" clock is the same as that used
by other omap processors.

* Added the missing clock definition as mmc3_ck to clock.h
* Added the clock definition to omap_clks in clock.c
* Added CK_7XX to the mmci-omap.0 "ick" clock already in clock.c

With these changes, it is now possible to initialize and use MMC
cards with omap730 and omap850 devices.

Signed-off-by: Cory Maccarrone <darkstar6262@gmail.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2009-11-22 10:24:32 -08:00
..
include/mach omap: headers: Create headers necessary for compile under mach-omap1 and mach-omap2 2009-10-19 17:32:58 -07:00
board-ams-delta.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-fsample.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-generic.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-h2-mmc.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h2.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h2.h ARM: OMAP: No need to include board-h2.h from hardware.h 2009-03-23 18:07:33 -07:00
board-h3-mmc.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h3.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-h3.h ARM: OMAP: No need to include board-h3.h from hardware.h 2009-03-23 18:07:33 -07:00
board-innovator.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-nokia770.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-osk.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-palmte.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-palmtt.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-palmz71.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-perseus2.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-sx1-mmc.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
board-sx1.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
board-voiceblue.c Merge branch '7xx-iosplit-plat' with omap-fixes 2009-11-10 18:10:34 -08:00
clock.c omap1: mmc: Add platform init for omap7xx 2009-11-22 10:24:32 -08:00
clock.h omap1: mmc: Add platform init for omap7xx 2009-11-22 10:24:32 -08:00
devices.c omap1: mmc: Add platform init for omap7xx 2009-11-22 10:24:32 -08:00
fpga.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
id.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
io.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
irq.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
Kconfig ARM: OMAP1: Misc clean-up 2009-05-25 11:08:44 -07:00
leds-h2p2-debug.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
leds-innovator.c [ARM] Move include/asm-arm/arch-* to arch/arm/*/include/mach 2008-08-07 09:55:48 +01:00
leds-osk.c ARM: OMAP: switch to standard gpio get/set calls 2008-12-10 17:35:25 -08:00
leds.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
leds.h
mailbox.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
Makefile ARM: OMAP1: Misc clean-up 2009-05-25 11:08:44 -07:00
Makefile.boot
mcbsp.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
mux.c omap1: mmc: Add platform init for omap7xx 2009-11-22 10:24:32 -08:00
pm.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
pm.h OMAP850: PM: Add an ARCH_OMAP850 check 2009-10-07 23:14:08 +01:00
serial.c omap: Eliminate OMAP_MAX_NR_PORTS 2009-11-22 10:24:32 -08:00
sleep.S OMAP7XX: Rename all the rest of the omap730 references in omap1 core 2009-10-07 23:14:06 +01:00
sram.S OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
time.c OMAP: Remove OMAP_IO_ADDRESS, use OMAP1_IO_ADDRESS and OMAP2_IO_ADDRESS instead 2009-08-28 10:50:33 -07:00
timer32k.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00