a6b963db0d
Made changes to resume the flash controller if it is halted before going ahead with flash controller pause/resume logic. Made changes to avoid clearing off the interrupts during the initial pll initialization. Signed-off-by: Krishna Gudipati <kgudipat@brocade.com> Signed-off-by: James Bottomley <JBottomley@Parallels.com>
456 lines
18 KiB
C
456 lines
18 KiB
C
/*
|
|
* Copyright (c) 2005-2010 Brocade Communications Systems, Inc.
|
|
* All rights reserved
|
|
* www.brocade.com
|
|
*
|
|
* Linux driver for Brocade Fibre Channel Host Bus Adapter.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License (GPL) Version 2 as
|
|
* published by the Free Software Foundation
|
|
*
|
|
* This program is distributed in the hope that it will be useful, but
|
|
* WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
|
|
* General Public License for more details.
|
|
*/
|
|
|
|
/*
|
|
* bfi_reg.h ASIC register defines for all Brocade adapter ASICs
|
|
*/
|
|
|
|
#ifndef __BFI_REG_H__
|
|
#define __BFI_REG_H__
|
|
|
|
#define HOSTFN0_INT_STATUS 0x00014000 /* cb/ct */
|
|
#define HOSTFN1_INT_STATUS 0x00014100 /* cb/ct */
|
|
#define HOSTFN2_INT_STATUS 0x00014300 /* ct */
|
|
#define HOSTFN3_INT_STATUS 0x00014400 /* ct */
|
|
#define HOSTFN0_INT_MSK 0x00014004 /* cb/ct */
|
|
#define HOSTFN1_INT_MSK 0x00014104 /* cb/ct */
|
|
#define HOSTFN2_INT_MSK 0x00014304 /* ct */
|
|
#define HOSTFN3_INT_MSK 0x00014404 /* ct */
|
|
|
|
#define HOST_PAGE_NUM_FN0 0x00014008 /* cb/ct */
|
|
#define HOST_PAGE_NUM_FN1 0x00014108 /* cb/ct */
|
|
#define HOST_PAGE_NUM_FN2 0x00014308 /* ct */
|
|
#define HOST_PAGE_NUM_FN3 0x00014408 /* ct */
|
|
|
|
#define APP_PLL_LCLK_CTL_REG 0x00014204 /* cb/ct */
|
|
#define __P_LCLK_PLL_LOCK 0x80000000
|
|
#define __APP_PLL_LCLK_SRAM_USE_100MHZ 0x00100000
|
|
#define __APP_PLL_LCLK_RESET_TIMER_MK 0x000e0000
|
|
#define __APP_PLL_LCLK_RESET_TIMER_SH 17
|
|
#define __APP_PLL_LCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_LCLK_RESET_TIMER_SH)
|
|
#define __APP_PLL_LCLK_LOGIC_SOFT_RESET 0x00010000
|
|
#define __APP_PLL_LCLK_CNTLMT0_1_MK 0x0000c000
|
|
#define __APP_PLL_LCLK_CNTLMT0_1_SH 14
|
|
#define __APP_PLL_LCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_LCLK_CNTLMT0_1_SH)
|
|
#define __APP_PLL_LCLK_JITLMT0_1_MK 0x00003000
|
|
#define __APP_PLL_LCLK_JITLMT0_1_SH 12
|
|
#define __APP_PLL_LCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_LCLK_JITLMT0_1_SH)
|
|
#define __APP_PLL_LCLK_HREF 0x00000800
|
|
#define __APP_PLL_LCLK_HDIV 0x00000400
|
|
#define __APP_PLL_LCLK_P0_1_MK 0x00000300
|
|
#define __APP_PLL_LCLK_P0_1_SH 8
|
|
#define __APP_PLL_LCLK_P0_1(_v) ((_v) << __APP_PLL_LCLK_P0_1_SH)
|
|
#define __APP_PLL_LCLK_Z0_2_MK 0x000000e0
|
|
#define __APP_PLL_LCLK_Z0_2_SH 5
|
|
#define __APP_PLL_LCLK_Z0_2(_v) ((_v) << __APP_PLL_LCLK_Z0_2_SH)
|
|
#define __APP_PLL_LCLK_RSEL200500 0x00000010
|
|
#define __APP_PLL_LCLK_ENARST 0x00000008
|
|
#define __APP_PLL_LCLK_BYPASS 0x00000004
|
|
#define __APP_PLL_LCLK_LRESETN 0x00000002
|
|
#define __APP_PLL_LCLK_ENABLE 0x00000001
|
|
#define APP_PLL_SCLK_CTL_REG 0x00014208 /* cb/ct */
|
|
#define __P_SCLK_PLL_LOCK 0x80000000
|
|
#define __APP_PLL_SCLK_RESET_TIMER_MK 0x000e0000
|
|
#define __APP_PLL_SCLK_RESET_TIMER_SH 17
|
|
#define __APP_PLL_SCLK_RESET_TIMER(_v) ((_v) << __APP_PLL_SCLK_RESET_TIMER_SH)
|
|
#define __APP_PLL_SCLK_LOGIC_SOFT_RESET 0x00010000
|
|
#define __APP_PLL_SCLK_CNTLMT0_1_MK 0x0000c000
|
|
#define __APP_PLL_SCLK_CNTLMT0_1_SH 14
|
|
#define __APP_PLL_SCLK_CNTLMT0_1(_v) ((_v) << __APP_PLL_SCLK_CNTLMT0_1_SH)
|
|
#define __APP_PLL_SCLK_JITLMT0_1_MK 0x00003000
|
|
#define __APP_PLL_SCLK_JITLMT0_1_SH 12
|
|
#define __APP_PLL_SCLK_JITLMT0_1(_v) ((_v) << __APP_PLL_SCLK_JITLMT0_1_SH)
|
|
#define __APP_PLL_SCLK_HREF 0x00000800
|
|
#define __APP_PLL_SCLK_HDIV 0x00000400
|
|
#define __APP_PLL_SCLK_P0_1_MK 0x00000300
|
|
#define __APP_PLL_SCLK_P0_1_SH 8
|
|
#define __APP_PLL_SCLK_P0_1(_v) ((_v) << __APP_PLL_SCLK_P0_1_SH)
|
|
#define __APP_PLL_SCLK_Z0_2_MK 0x000000e0
|
|
#define __APP_PLL_SCLK_Z0_2_SH 5
|
|
#define __APP_PLL_SCLK_Z0_2(_v) ((_v) << __APP_PLL_SCLK_Z0_2_SH)
|
|
#define __APP_PLL_SCLK_RSEL200500 0x00000010
|
|
#define __APP_PLL_SCLK_ENARST 0x00000008
|
|
#define __APP_PLL_SCLK_BYPASS 0x00000004
|
|
#define __APP_PLL_SCLK_LRESETN 0x00000002
|
|
#define __APP_PLL_SCLK_ENABLE 0x00000001
|
|
#define __ENABLE_MAC_AHB_1 0x00800000 /* ct */
|
|
#define __ENABLE_MAC_AHB_0 0x00400000 /* ct */
|
|
#define __ENABLE_MAC_1 0x00200000 /* ct */
|
|
#define __ENABLE_MAC_0 0x00100000 /* ct */
|
|
|
|
#define HOST_SEM0_REG 0x00014230 /* cb/ct */
|
|
#define HOST_SEM1_REG 0x00014234 /* cb/ct */
|
|
#define HOST_SEM2_REG 0x00014238 /* cb/ct */
|
|
#define HOST_SEM3_REG 0x0001423c /* cb/ct */
|
|
#define HOST_SEM4_REG 0x00014610 /* cb/ct */
|
|
#define HOST_SEM5_REG 0x00014614 /* cb/ct */
|
|
#define HOST_SEM6_REG 0x00014618 /* cb/ct */
|
|
#define HOST_SEM7_REG 0x0001461c /* cb/ct */
|
|
#define HOST_SEM0_INFO_REG 0x00014240 /* cb/ct */
|
|
#define HOST_SEM1_INFO_REG 0x00014244 /* cb/ct */
|
|
#define HOST_SEM2_INFO_REG 0x00014248 /* cb/ct */
|
|
#define HOST_SEM3_INFO_REG 0x0001424c /* cb/ct */
|
|
#define HOST_SEM4_INFO_REG 0x00014620 /* cb/ct */
|
|
#define HOST_SEM5_INFO_REG 0x00014624 /* cb/ct */
|
|
#define HOST_SEM6_INFO_REG 0x00014628 /* cb/ct */
|
|
#define HOST_SEM7_INFO_REG 0x0001462c /* cb/ct */
|
|
|
|
#define HOSTFN0_LPU0_CMD_STAT 0x00019000 /* cb/ct */
|
|
#define HOSTFN0_LPU1_CMD_STAT 0x00019004 /* cb/ct */
|
|
#define HOSTFN1_LPU0_CMD_STAT 0x00019010 /* cb/ct */
|
|
#define HOSTFN1_LPU1_CMD_STAT 0x00019014 /* cb/ct */
|
|
#define HOSTFN2_LPU0_CMD_STAT 0x00019150 /* ct */
|
|
#define HOSTFN2_LPU1_CMD_STAT 0x00019154 /* ct */
|
|
#define HOSTFN3_LPU0_CMD_STAT 0x00019160 /* ct */
|
|
#define HOSTFN3_LPU1_CMD_STAT 0x00019164 /* ct */
|
|
#define LPU0_HOSTFN0_CMD_STAT 0x00019008 /* cb/ct */
|
|
#define LPU1_HOSTFN0_CMD_STAT 0x0001900c /* cb/ct */
|
|
#define LPU0_HOSTFN1_CMD_STAT 0x00019018 /* cb/ct */
|
|
#define LPU1_HOSTFN1_CMD_STAT 0x0001901c /* cb/ct */
|
|
#define LPU0_HOSTFN2_CMD_STAT 0x00019158 /* ct */
|
|
#define LPU1_HOSTFN2_CMD_STAT 0x0001915c /* ct */
|
|
#define LPU0_HOSTFN3_CMD_STAT 0x00019168 /* ct */
|
|
#define LPU1_HOSTFN3_CMD_STAT 0x0001916c /* ct */
|
|
|
|
#define PSS_CTL_REG 0x00018800 /* cb/ct */
|
|
#define __PSS_I2C_CLK_DIV_MK 0x007f0000
|
|
#define __PSS_I2C_CLK_DIV_SH 16
|
|
#define __PSS_I2C_CLK_DIV(_v) ((_v) << __PSS_I2C_CLK_DIV_SH)
|
|
#define __PSS_LMEM_INIT_DONE 0x00001000
|
|
#define __PSS_LMEM_RESET 0x00000200
|
|
#define __PSS_LMEM_INIT_EN 0x00000100
|
|
#define __PSS_LPU1_RESET 0x00000002
|
|
#define __PSS_LPU0_RESET 0x00000001
|
|
#define PSS_ERR_STATUS_REG 0x00018810 /* cb/ct */
|
|
#define ERR_SET_REG 0x00018818 /* cb/ct */
|
|
#define PSS_GPIO_OUT_REG 0x000188c0 /* cb/ct */
|
|
#define __PSS_GPIO_OUT_REG 0x00000fff
|
|
#define PSS_GPIO_OE_REG 0x000188c8 /* cb/ct */
|
|
#define __PSS_GPIO_OE_REG 0x000000ff
|
|
|
|
#define HOSTFN0_LPU_MBOX0_0 0x00019200 /* cb/ct */
|
|
#define HOSTFN1_LPU_MBOX0_8 0x00019260 /* cb/ct */
|
|
#define LPU_HOSTFN0_MBOX0_0 0x00019280 /* cb/ct */
|
|
#define LPU_HOSTFN1_MBOX0_8 0x000192e0 /* cb/ct */
|
|
#define HOSTFN2_LPU_MBOX0_0 0x00019400 /* ct */
|
|
#define HOSTFN3_LPU_MBOX0_8 0x00019460 /* ct */
|
|
#define LPU_HOSTFN2_MBOX0_0 0x00019480 /* ct */
|
|
#define LPU_HOSTFN3_MBOX0_8 0x000194e0 /* ct */
|
|
|
|
#define HOST_MSIX_ERR_INDEX_FN0 0x0001400c /* ct */
|
|
#define HOST_MSIX_ERR_INDEX_FN1 0x0001410c /* ct */
|
|
#define HOST_MSIX_ERR_INDEX_FN2 0x0001430c /* ct */
|
|
#define HOST_MSIX_ERR_INDEX_FN3 0x0001440c /* ct */
|
|
|
|
#define MBIST_CTL_REG 0x00014220 /* ct */
|
|
#define __EDRAM_BISTR_START 0x00000004
|
|
#define MBIST_STAT_REG 0x00014224 /* ct */
|
|
#define ETH_MAC_SER_REG 0x00014288 /* ct */
|
|
#define __APP_EMS_CKBUFAMPIN 0x00000020
|
|
#define __APP_EMS_REFCLKSEL 0x00000010
|
|
#define __APP_EMS_CMLCKSEL 0x00000008
|
|
#define __APP_EMS_REFCKBUFEN2 0x00000004
|
|
#define __APP_EMS_REFCKBUFEN1 0x00000002
|
|
#define __APP_EMS_CHANNEL_SEL 0x00000001
|
|
#define FNC_PERS_REG 0x00014604 /* ct */
|
|
#define __F3_FUNCTION_ACTIVE 0x80000000
|
|
#define __F3_FUNCTION_MODE 0x40000000
|
|
#define __F3_PORT_MAP_MK 0x30000000
|
|
#define __F3_PORT_MAP_SH 28
|
|
#define __F3_PORT_MAP(_v) ((_v) << __F3_PORT_MAP_SH)
|
|
#define __F3_VM_MODE 0x08000000
|
|
#define __F3_INTX_STATUS_MK 0x07000000
|
|
#define __F3_INTX_STATUS_SH 24
|
|
#define __F3_INTX_STATUS(_v) ((_v) << __F3_INTX_STATUS_SH)
|
|
#define __F2_FUNCTION_ACTIVE 0x00800000
|
|
#define __F2_FUNCTION_MODE 0x00400000
|
|
#define __F2_PORT_MAP_MK 0x00300000
|
|
#define __F2_PORT_MAP_SH 20
|
|
#define __F2_PORT_MAP(_v) ((_v) << __F2_PORT_MAP_SH)
|
|
#define __F2_VM_MODE 0x00080000
|
|
#define __F2_INTX_STATUS_MK 0x00070000
|
|
#define __F2_INTX_STATUS_SH 16
|
|
#define __F2_INTX_STATUS(_v) ((_v) << __F2_INTX_STATUS_SH)
|
|
#define __F1_FUNCTION_ACTIVE 0x00008000
|
|
#define __F1_FUNCTION_MODE 0x00004000
|
|
#define __F1_PORT_MAP_MK 0x00003000
|
|
#define __F1_PORT_MAP_SH 12
|
|
#define __F1_PORT_MAP(_v) ((_v) << __F1_PORT_MAP_SH)
|
|
#define __F1_VM_MODE 0x00000800
|
|
#define __F1_INTX_STATUS_MK 0x00000700
|
|
#define __F1_INTX_STATUS_SH 8
|
|
#define __F1_INTX_STATUS(_v) ((_v) << __F1_INTX_STATUS_SH)
|
|
#define __F0_FUNCTION_ACTIVE 0x00000080
|
|
#define __F0_FUNCTION_MODE 0x00000040
|
|
#define __F0_PORT_MAP_MK 0x00000030
|
|
#define __F0_PORT_MAP_SH 4
|
|
#define __F0_PORT_MAP(_v) ((_v) << __F0_PORT_MAP_SH)
|
|
#define __F0_VM_MODE 0x00000008
|
|
#define __F0_INTX_STATUS 0x00000007
|
|
enum {
|
|
__F0_INTX_STATUS_MSIX = 0x0,
|
|
__F0_INTX_STATUS_INTA = 0x1,
|
|
__F0_INTX_STATUS_INTB = 0x2,
|
|
__F0_INTX_STATUS_INTC = 0x3,
|
|
__F0_INTX_STATUS_INTD = 0x4,
|
|
};
|
|
|
|
#define OP_MODE 0x0001460c /* ct */
|
|
#define __APP_ETH_CLK_LOWSPEED 0x00000004
|
|
#define __GLOBAL_CORECLK_HALFSPEED 0x00000002
|
|
#define __GLOBAL_FCOE_MODE 0x00000001
|
|
#define FW_INIT_HALT_P0 0x000191ac /* ct */
|
|
#define __FW_INIT_HALT_P 0x00000001
|
|
#define FW_INIT_HALT_P1 0x000191bc /* ct */
|
|
#define PMM_1T_RESET_REG_P0 0x0002381c /* ct */
|
|
#define __PMM_1T_RESET_P 0x00000001
|
|
#define PMM_1T_RESET_REG_P1 0x00023c1c /* ct */
|
|
|
|
/**
|
|
* Catapult-2 specific defines
|
|
*/
|
|
#define CT2_PCI_CPQ_BASE 0x00030000
|
|
#define CT2_PCI_APP_BASE 0x00030100
|
|
#define CT2_PCI_ETH_BASE 0x00030400
|
|
|
|
/*
|
|
* APP block registers
|
|
*/
|
|
#define CT2_HOSTFN_INT_STATUS (CT2_PCI_APP_BASE + 0x00)
|
|
#define CT2_HOSTFN_INTR_MASK (CT2_PCI_APP_BASE + 0x04)
|
|
#define CT2_HOSTFN_PERSONALITY0 (CT2_PCI_APP_BASE + 0x08)
|
|
#define __PME_STATUS_ 0x00200000
|
|
#define __PF_VF_BAR_SIZE_MODE__MK 0x00180000
|
|
#define __PF_VF_BAR_SIZE_MODE__SH 19
|
|
#define __PF_VF_BAR_SIZE_MODE_(_v) ((_v) << __PF_VF_BAR_SIZE_MODE__SH)
|
|
#define __FC_LL_PORT_MAP__MK 0x00060000
|
|
#define __FC_LL_PORT_MAP__SH 17
|
|
#define __FC_LL_PORT_MAP_(_v) ((_v) << __FC_LL_PORT_MAP__SH)
|
|
#define __PF_VF_ACTIVE_ 0x00010000
|
|
#define __PF_VF_CFG_RDY_ 0x00008000
|
|
#define __PF_VF_ENABLE_ 0x00004000
|
|
#define __PF_DRIVER_ACTIVE_ 0x00002000
|
|
#define __PF_PME_SEND_ENABLE_ 0x00001000
|
|
#define __PF_EXROM_OFFSET__MK 0x00000ff0
|
|
#define __PF_EXROM_OFFSET__SH 4
|
|
#define __PF_EXROM_OFFSET_(_v) ((_v) << __PF_EXROM_OFFSET__SH)
|
|
#define __FC_LL_MODE_ 0x00000008
|
|
#define __PF_INTX_PIN_ 0x00000007
|
|
#define CT2_HOSTFN_PERSONALITY1 (CT2_PCI_APP_BASE + 0x0C)
|
|
#define __PF_NUM_QUEUES1__MK 0xff000000
|
|
#define __PF_NUM_QUEUES1__SH 24
|
|
#define __PF_NUM_QUEUES1_(_v) ((_v) << __PF_NUM_QUEUES1__SH)
|
|
#define __PF_VF_QUE_OFFSET1__MK 0x00ff0000
|
|
#define __PF_VF_QUE_OFFSET1__SH 16
|
|
#define __PF_VF_QUE_OFFSET1_(_v) ((_v) << __PF_VF_QUE_OFFSET1__SH)
|
|
#define __PF_VF_NUM_QUEUES__MK 0x0000ff00
|
|
#define __PF_VF_NUM_QUEUES__SH 8
|
|
#define __PF_VF_NUM_QUEUES_(_v) ((_v) << __PF_VF_NUM_QUEUES__SH)
|
|
#define __PF_VF_QUE_OFFSET_ 0x000000ff
|
|
#define CT2_HOSTFN_PAGE_NUM (CT2_PCI_APP_BASE + 0x18)
|
|
#define CT2_HOSTFN_MSIX_VT_INDEX_MBOX_ERR (CT2_PCI_APP_BASE + 0x38)
|
|
|
|
/*
|
|
* Catapult-2 CPQ block registers
|
|
*/
|
|
#define CT2_HOSTFN_LPU0_MBOX0 (CT2_PCI_CPQ_BASE + 0x00)
|
|
#define CT2_HOSTFN_LPU1_MBOX0 (CT2_PCI_CPQ_BASE + 0x20)
|
|
#define CT2_LPU0_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x40)
|
|
#define CT2_LPU1_HOSTFN_MBOX0 (CT2_PCI_CPQ_BASE + 0x60)
|
|
#define CT2_HOSTFN_LPU0_CMD_STAT (CT2_PCI_CPQ_BASE + 0x80)
|
|
#define CT2_HOSTFN_LPU1_CMD_STAT (CT2_PCI_CPQ_BASE + 0x84)
|
|
#define CT2_LPU0_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x88)
|
|
#define CT2_LPU1_HOSTFN_CMD_STAT (CT2_PCI_CPQ_BASE + 0x8c)
|
|
#define CT2_HOSTFN_LPU0_READ_STAT (CT2_PCI_CPQ_BASE + 0x90)
|
|
#define CT2_HOSTFN_LPU1_READ_STAT (CT2_PCI_CPQ_BASE + 0x94)
|
|
#define CT2_LPU0_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x98)
|
|
#define CT2_LPU1_HOSTFN_MBOX0_MSK (CT2_PCI_CPQ_BASE + 0x9C)
|
|
#define CT2_HOST_SEM0_REG 0x000148f0
|
|
#define CT2_HOST_SEM1_REG 0x000148f4
|
|
#define CT2_HOST_SEM2_REG 0x000148f8
|
|
#define CT2_HOST_SEM3_REG 0x000148fc
|
|
#define CT2_HOST_SEM4_REG 0x00014900
|
|
#define CT2_HOST_SEM5_REG 0x00014904
|
|
#define CT2_HOST_SEM6_REG 0x00014908
|
|
#define CT2_HOST_SEM7_REG 0x0001490c
|
|
#define CT2_HOST_SEM0_INFO_REG 0x000148b0
|
|
#define CT2_HOST_SEM1_INFO_REG 0x000148b4
|
|
#define CT2_HOST_SEM2_INFO_REG 0x000148b8
|
|
#define CT2_HOST_SEM3_INFO_REG 0x000148bc
|
|
#define CT2_HOST_SEM4_INFO_REG 0x000148c0
|
|
#define CT2_HOST_SEM5_INFO_REG 0x000148c4
|
|
#define CT2_HOST_SEM6_INFO_REG 0x000148c8
|
|
#define CT2_HOST_SEM7_INFO_REG 0x000148cc
|
|
|
|
#define CT2_APP_PLL_LCLK_CTL_REG 0x00014808
|
|
#define __APP_LPUCLK_HALFSPEED 0x40000000
|
|
#define __APP_PLL_LCLK_LOAD 0x20000000
|
|
#define __APP_PLL_LCLK_FBCNT_MK 0x1fe00000
|
|
#define __APP_PLL_LCLK_FBCNT_SH 21
|
|
#define __APP_PLL_LCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
|
|
enum {
|
|
__APP_PLL_LCLK_FBCNT_425_MHZ = 6,
|
|
__APP_PLL_LCLK_FBCNT_468_MHZ = 4,
|
|
};
|
|
#define __APP_PLL_LCLK_EXTFB 0x00000800
|
|
#define __APP_PLL_LCLK_ENOUTS 0x00000400
|
|
#define __APP_PLL_LCLK_RATE 0x00000010
|
|
#define CT2_APP_PLL_SCLK_CTL_REG 0x0001480c
|
|
#define __P_SCLK_PLL_LOCK 0x80000000
|
|
#define __APP_PLL_SCLK_REFCLK_SEL 0x40000000
|
|
#define __APP_PLL_SCLK_CLK_DIV2 0x20000000
|
|
#define __APP_PLL_SCLK_LOAD 0x10000000
|
|
#define __APP_PLL_SCLK_FBCNT_MK 0x0ff00000
|
|
#define __APP_PLL_SCLK_FBCNT_SH 20
|
|
#define __APP_PLL_SCLK_FBCNT(_v) ((_v) << __APP_PLL_SCLK_FBCNT_SH)
|
|
enum {
|
|
__APP_PLL_SCLK_FBCNT_NORM = 6,
|
|
__APP_PLL_SCLK_FBCNT_10G_FC = 10,
|
|
};
|
|
#define __APP_PLL_SCLK_EXTFB 0x00000800
|
|
#define __APP_PLL_SCLK_ENOUTS 0x00000400
|
|
#define __APP_PLL_SCLK_RATE 0x00000010
|
|
#define CT2_PCIE_MISC_REG 0x00014804
|
|
#define __ETH_CLK_ENABLE_PORT1 0x00000010
|
|
#define CT2_CHIP_MISC_PRG 0x000148a4
|
|
#define __ETH_CLK_ENABLE_PORT0 0x00004000
|
|
#define __APP_LPU_SPEED 0x00000002
|
|
#define CT2_MBIST_STAT_REG 0x00014818
|
|
#define CT2_MBIST_CTL_REG 0x0001481c
|
|
#define CT2_PMM_1T_CONTROL_REG_P0 0x0002381c
|
|
#define __PMM_1T_PNDB_P 0x00000002
|
|
#define CT2_PMM_1T_CONTROL_REG_P1 0x00023c1c
|
|
#define CT2_WGN_STATUS 0x00014990
|
|
#define __A2T_AHB_LOAD 0x00000800
|
|
#define __WGN_READY 0x00000400
|
|
#define __GLBL_PF_VF_CFG_RDY 0x00000200
|
|
#define CT2_NFC_CSR_CLR_REG 0x00027420
|
|
#define CT2_NFC_CSR_SET_REG 0x00027424
|
|
#define __HALT_NFC_CONTROLLER 0x00000002
|
|
#define __NFC_CONTROLLER_HALTED 0x00001000
|
|
#define CT2_RSC_GPR15_REG 0x0002765c
|
|
#define CT2_CSI_FW_CTL_REG 0x00027080
|
|
#define CT2_CSI_FW_CTL_SET_REG 0x00027088
|
|
#define __RESET_AND_START_SCLK_LCLK_PLLS 0x00010000
|
|
|
|
#define CT2_CSI_MAC0_CONTROL_REG 0x000270d0
|
|
#define __CSI_MAC_RESET 0x00000010
|
|
#define __CSI_MAC_AHB_RESET 0x00000008
|
|
#define CT2_CSI_MAC1_CONTROL_REG 0x000270d4
|
|
#define CT2_CSI_MAC_CONTROL_REG(__n) \
|
|
(CT2_CSI_MAC0_CONTROL_REG + \
|
|
(__n) * (CT2_CSI_MAC1_CONTROL_REG - CT2_CSI_MAC0_CONTROL_REG))
|
|
|
|
/*
|
|
* Name semaphore registers based on usage
|
|
*/
|
|
#define BFA_IOC0_HBEAT_REG HOST_SEM0_INFO_REG
|
|
#define BFA_IOC0_STATE_REG HOST_SEM1_INFO_REG
|
|
#define BFA_IOC1_HBEAT_REG HOST_SEM2_INFO_REG
|
|
#define BFA_IOC1_STATE_REG HOST_SEM3_INFO_REG
|
|
#define BFA_FW_USE_COUNT HOST_SEM4_INFO_REG
|
|
#define BFA_IOC_FAIL_SYNC HOST_SEM5_INFO_REG
|
|
|
|
/*
|
|
* CT2 semaphore register locations changed
|
|
*/
|
|
#define CT2_BFA_IOC0_HBEAT_REG CT2_HOST_SEM0_INFO_REG
|
|
#define CT2_BFA_IOC0_STATE_REG CT2_HOST_SEM1_INFO_REG
|
|
#define CT2_BFA_IOC1_HBEAT_REG CT2_HOST_SEM2_INFO_REG
|
|
#define CT2_BFA_IOC1_STATE_REG CT2_HOST_SEM3_INFO_REG
|
|
#define CT2_BFA_FW_USE_COUNT CT2_HOST_SEM4_INFO_REG
|
|
#define CT2_BFA_IOC_FAIL_SYNC CT2_HOST_SEM5_INFO_REG
|
|
|
|
#define CPE_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
|
|
#define RME_Q_NUM(__fn, __q) (((__fn) << 2) + (__q))
|
|
|
|
/*
|
|
* And corresponding host interrupt status bit field defines
|
|
*/
|
|
#define __HFN_INT_CPE_Q0 0x00000001U
|
|
#define __HFN_INT_CPE_Q1 0x00000002U
|
|
#define __HFN_INT_CPE_Q2 0x00000004U
|
|
#define __HFN_INT_CPE_Q3 0x00000008U
|
|
#define __HFN_INT_CPE_Q4 0x00000010U
|
|
#define __HFN_INT_CPE_Q5 0x00000020U
|
|
#define __HFN_INT_CPE_Q6 0x00000040U
|
|
#define __HFN_INT_CPE_Q7 0x00000080U
|
|
#define __HFN_INT_RME_Q0 0x00000100U
|
|
#define __HFN_INT_RME_Q1 0x00000200U
|
|
#define __HFN_INT_RME_Q2 0x00000400U
|
|
#define __HFN_INT_RME_Q3 0x00000800U
|
|
#define __HFN_INT_RME_Q4 0x00001000U
|
|
#define __HFN_INT_RME_Q5 0x00002000U
|
|
#define __HFN_INT_RME_Q6 0x00004000U
|
|
#define __HFN_INT_RME_Q7 0x00008000U
|
|
#define __HFN_INT_ERR_EMC 0x00010000U
|
|
#define __HFN_INT_ERR_LPU0 0x00020000U
|
|
#define __HFN_INT_ERR_LPU1 0x00040000U
|
|
#define __HFN_INT_ERR_PSS 0x00080000U
|
|
#define __HFN_INT_MBOX_LPU0 0x00100000U
|
|
#define __HFN_INT_MBOX_LPU1 0x00200000U
|
|
#define __HFN_INT_MBOX1_LPU0 0x00400000U
|
|
#define __HFN_INT_MBOX1_LPU1 0x00800000U
|
|
#define __HFN_INT_LL_HALT 0x01000000U
|
|
#define __HFN_INT_CPE_MASK 0x000000ffU
|
|
#define __HFN_INT_RME_MASK 0x0000ff00U
|
|
#define __HFN_INT_ERR_MASK \
|
|
(__HFN_INT_ERR_EMC | __HFN_INT_ERR_LPU0 | __HFN_INT_ERR_LPU1 | \
|
|
__HFN_INT_ERR_PSS | __HFN_INT_LL_HALT)
|
|
#define __HFN_INT_FN0_MASK \
|
|
(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
|
|
__HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
|
|
__HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0)
|
|
#define __HFN_INT_FN1_MASK \
|
|
(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
|
|
__HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
|
|
__HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1)
|
|
|
|
/*
|
|
* Host interrupt status defines for catapult-2
|
|
*/
|
|
#define __HFN_INT_MBOX_LPU0_CT2 0x00010000U
|
|
#define __HFN_INT_MBOX_LPU1_CT2 0x00020000U
|
|
#define __HFN_INT_ERR_PSS_CT2 0x00040000U
|
|
#define __HFN_INT_ERR_LPU0_CT2 0x00080000U
|
|
#define __HFN_INT_ERR_LPU1_CT2 0x00100000U
|
|
#define __HFN_INT_CPQ_HALT_CT2 0x00200000U
|
|
#define __HFN_INT_ERR_WGN_CT2 0x00400000U
|
|
#define __HFN_INT_ERR_LEHRX_CT2 0x00800000U
|
|
#define __HFN_INT_ERR_LEHTX_CT2 0x01000000U
|
|
#define __HFN_INT_ERR_MASK_CT2 \
|
|
(__HFN_INT_ERR_PSS_CT2 | __HFN_INT_ERR_LPU0_CT2 | \
|
|
__HFN_INT_ERR_LPU1_CT2 | __HFN_INT_CPQ_HALT_CT2 | \
|
|
__HFN_INT_ERR_WGN_CT2 | __HFN_INT_ERR_LEHRX_CT2 | \
|
|
__HFN_INT_ERR_LEHTX_CT2)
|
|
#define __HFN_INT_FN0_MASK_CT2 \
|
|
(__HFN_INT_CPE_Q0 | __HFN_INT_CPE_Q1 | __HFN_INT_CPE_Q2 | \
|
|
__HFN_INT_CPE_Q3 | __HFN_INT_RME_Q0 | __HFN_INT_RME_Q1 | \
|
|
__HFN_INT_RME_Q2 | __HFN_INT_RME_Q3 | __HFN_INT_MBOX_LPU0_CT2)
|
|
#define __HFN_INT_FN1_MASK_CT2 \
|
|
(__HFN_INT_CPE_Q4 | __HFN_INT_CPE_Q5 | __HFN_INT_CPE_Q6 | \
|
|
__HFN_INT_CPE_Q7 | __HFN_INT_RME_Q4 | __HFN_INT_RME_Q5 | \
|
|
__HFN_INT_RME_Q6 | __HFN_INT_RME_Q7 | __HFN_INT_MBOX_LPU1_CT2)
|
|
|
|
/*
|
|
* asic memory map.
|
|
*/
|
|
#define PSS_SMEM_PAGE_START 0x8000
|
|
#define PSS_SMEM_PGNUM(_pg0, _ma) ((_pg0) + ((_ma) >> 15))
|
|
#define PSS_SMEM_PGOFF(_ma) ((_ma) & 0x7fff)
|
|
|
|
#endif /* __BFI_REG_H__ */
|