kernel-fxtec-pro1x/drivers/pwm/pwm-tiecap.c
Linus Torvalds 3eb05225ee pwm: Changes for v3.9-rc1
A new driver has been added to support the PWM mode of the timer counter
 blocks found on Atmel AT91 SoCs. The VT8500 driver now supports changing
 the PWM signal polarity and the TI drivers (EHRPWM and ECAP) gained
 suspend and resume functionality.
 
 User drivers can now query the core for whether access to a PWM device
 will sleep (if the PWM chip is on a slow bus such as I2C or SPI).
 
 The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK state
 in addition to the FB layer's blanking states.
 
 To round things off, a few fixes and cleanups are also included.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v2.0.19 (GNU/Linux)
 
 iQIcBAABAgAGBQJRKxfbAAoJEN0jrNd/PrOhcwEP/0plVf30QDMhcan1GR3l+jmK
 3Q/cCNIWEZ75mRu+FtVYKUOduxkCOHR6LM4C2ScGnnpsS/X5oitc45FrblIwQaEI
 UeWVxDqI+pEp+rCdYVCND4lih60FJU0Cct0zZL2db4D4idF+8FRChhzwzSXhajnj
 ZZqz782Y2ig3YTLHtVGT1pp61DKxdu1Gz4U+fxo4G1/fnkquCYDzbCQovcmPSnnF
 gYB8hfxgT9JIt2cHrK6eKCHBF/4GToU+x5zDV2Ub15C2K/UQ+qgw82yl8MNd/ZS5
 rFA06iW3icnJRRc8u6hu9WVjNVNTBrUqUlFhctNB01d5jF4R6uR6aEvovT9xe8NW
 Wa5v5WrjnL6SWpZVwb/3kwwJmkeU9zKESQt5KUw3VKnT8yr2BfxcH1gJIiuW6wK7
 uYqknAvt2rwMEGzaKZJmQH682wNMxpJirs8hG9VjJc/v7AOnk6586HbRupAq8wWZ
 qK4n1Fto9RCg+b6e/hDId7+mN1GEcA5B8BOotPQ6ud+cinDZBKSbCSHhQG2LQ++F
 m81BbL82H2R2ICRoYNA74/bKq5OVOFFqHLHg5bUrG7ikdNbYOTK/4dF9qSS7DnT3
 Bi6WnKpOtfpWbHBnDunP2vBFo3f+gXmbLJdgarxk7mneV8wp0GY6TYI1awWn0hI9
 82JP3yiK5kW2JZv92o0H
 =Fcxi
 -----END PGP SIGNATURE-----

Merge tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm

Pull PWM changes from Thierry Reding:
 "A new driver has been added to support the PWM mode of the timer
  counter blocks found on Atmel AT91 SoCs.  The VT8500 driver now
  supports changing the PWM signal polarity and the TI drivers (EHRPWM
  and ECAP) gained suspend and resume functionality.

  User drivers can now query the core for whether access to a PWM device
  will sleep (if the PWM chip is on a slow bus such as I2C or SPI).

  The pwm-backlight driver now handles the backlight BL_CORE_FBBLANK
  state in addition to the FB layer's blanking states.

  To round things off, a few fixes and cleanups are also included"

* tag 'for-3.9-rc1' of git://gitorious.org/linux-pwm/linux-pwm:
  pwm: twl: Use to_twl() instead of container_of()
  pwm: tegra: assume CONFIG_OF
  pwm_backlight: Validate dft_brightness in main probe function
  pwm: Export pwm_{set,get}_chip_data()
  pwm: Make Kconfig entries more consistent
  pwm: Add can_sleep property to drivers
  pwm: Add pwm_can_sleep() as exported API to users
  pwm-backlight: handle BL_CORE_FBBLANK state
  pwm: pwm-tiecap: Low power sleep support
  pwm: pwm-tiehrpwm: Low power sleep support
  pwm: pwm-tiehrpwm: Update the clock handling of pwm-tiehrpwm driver
  pwm: vt8500: Add polarity support
  pwm: vt8500: Register write busy test performed incorrectly
  pwm: atmel: add Timer Counter Block PWM driver
2013-02-26 09:34:29 -08:00

358 lines
9 KiB
C

/*
* ECAP PWM driver
*
* Copyright (C) 2012 Texas Instruments, Inc. - http://www.ti.com/
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/pm_runtime.h>
#include <linux/pwm.h>
#include <linux/of_device.h>
#include <linux/pinctrl/consumer.h>
#include "pwm-tipwmss.h"
/* ECAP registers and bits definitions */
#define CAP1 0x08
#define CAP2 0x0C
#define CAP3 0x10
#define CAP4 0x14
#define ECCTL2 0x2A
#define ECCTL2_APWM_POL_LOW BIT(10)
#define ECCTL2_APWM_MODE BIT(9)
#define ECCTL2_SYNC_SEL_DISA (BIT(7) | BIT(6))
#define ECCTL2_TSCTR_FREERUN BIT(4)
struct ecap_context {
u32 cap3;
u32 cap4;
u16 ecctl2;
};
struct ecap_pwm_chip {
struct pwm_chip chip;
unsigned int clk_rate;
void __iomem *mmio_base;
struct ecap_context ctx;
};
static inline struct ecap_pwm_chip *to_ecap_pwm_chip(struct pwm_chip *chip)
{
return container_of(chip, struct ecap_pwm_chip, chip);
}
/*
* period_ns = 10^9 * period_cycles / PWM_CLK_RATE
* duty_ns = 10^9 * duty_cycles / PWM_CLK_RATE
*/
static int ecap_pwm_config(struct pwm_chip *chip, struct pwm_device *pwm,
int duty_ns, int period_ns)
{
struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
unsigned long long c;
unsigned long period_cycles, duty_cycles;
unsigned int reg_val;
if (period_ns > NSEC_PER_SEC)
return -ERANGE;
c = pc->clk_rate;
c = c * period_ns;
do_div(c, NSEC_PER_SEC);
period_cycles = (unsigned long)c;
if (period_cycles < 1) {
period_cycles = 1;
duty_cycles = 1;
} else {
c = pc->clk_rate;
c = c * duty_ns;
do_div(c, NSEC_PER_SEC);
duty_cycles = (unsigned long)c;
}
pm_runtime_get_sync(pc->chip.dev);
reg_val = readw(pc->mmio_base + ECCTL2);
/* Configure APWM mode & disable sync option */
reg_val |= ECCTL2_APWM_MODE | ECCTL2_SYNC_SEL_DISA;
writew(reg_val, pc->mmio_base + ECCTL2);
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
/* Update active registers if not running */
writel(duty_cycles, pc->mmio_base + CAP2);
writel(period_cycles, pc->mmio_base + CAP1);
} else {
/*
* Update shadow registers to configure period and
* compare values. This helps current PWM period to
* complete on reconfiguring
*/
writel(duty_cycles, pc->mmio_base + CAP4);
writel(period_cycles, pc->mmio_base + CAP3);
}
if (!test_bit(PWMF_ENABLED, &pwm->flags)) {
reg_val = readw(pc->mmio_base + ECCTL2);
/* Disable APWM mode to put APWM output Low */
reg_val &= ~ECCTL2_APWM_MODE;
writew(reg_val, pc->mmio_base + ECCTL2);
}
pm_runtime_put_sync(pc->chip.dev);
return 0;
}
static int ecap_pwm_set_polarity(struct pwm_chip *chip, struct pwm_device *pwm,
enum pwm_polarity polarity)
{
struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
unsigned short reg_val;
pm_runtime_get_sync(pc->chip.dev);
reg_val = readw(pc->mmio_base + ECCTL2);
if (polarity == PWM_POLARITY_INVERSED)
/* Duty cycle defines LOW period of PWM */
reg_val |= ECCTL2_APWM_POL_LOW;
else
/* Duty cycle defines HIGH period of PWM */
reg_val &= ~ECCTL2_APWM_POL_LOW;
writew(reg_val, pc->mmio_base + ECCTL2);
pm_runtime_put_sync(pc->chip.dev);
return 0;
}
static int ecap_pwm_enable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
unsigned int reg_val;
/* Leave clock enabled on enabling PWM */
pm_runtime_get_sync(pc->chip.dev);
/*
* Enable 'Free run Time stamp counter mode' to start counter
* and 'APWM mode' to enable APWM output
*/
reg_val = readw(pc->mmio_base + ECCTL2);
reg_val |= ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE;
writew(reg_val, pc->mmio_base + ECCTL2);
return 0;
}
static void ecap_pwm_disable(struct pwm_chip *chip, struct pwm_device *pwm)
{
struct ecap_pwm_chip *pc = to_ecap_pwm_chip(chip);
unsigned int reg_val;
/*
* Disable 'Free run Time stamp counter mode' to stop counter
* and 'APWM mode' to put APWM output to low
*/
reg_val = readw(pc->mmio_base + ECCTL2);
reg_val &= ~(ECCTL2_TSCTR_FREERUN | ECCTL2_APWM_MODE);
writew(reg_val, pc->mmio_base + ECCTL2);
/* Disable clock on PWM disable */
pm_runtime_put_sync(pc->chip.dev);
}
static void ecap_pwm_free(struct pwm_chip *chip, struct pwm_device *pwm)
{
if (test_bit(PWMF_ENABLED, &pwm->flags)) {
dev_warn(chip->dev, "Removing PWM device without disabling\n");
pm_runtime_put_sync(chip->dev);
}
}
static const struct pwm_ops ecap_pwm_ops = {
.free = ecap_pwm_free,
.config = ecap_pwm_config,
.set_polarity = ecap_pwm_set_polarity,
.enable = ecap_pwm_enable,
.disable = ecap_pwm_disable,
.owner = THIS_MODULE,
};
static const struct of_device_id ecap_of_match[] = {
{ .compatible = "ti,am33xx-ecap" },
{},
};
MODULE_DEVICE_TABLE(of, ecap_of_match);
static int ecap_pwm_probe(struct platform_device *pdev)
{
int ret;
struct resource *r;
struct clk *clk;
struct ecap_pwm_chip *pc;
u16 status;
struct pinctrl *pinctrl;
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl))
dev_warn(&pdev->dev, "unable to select pin group\n");
pc = devm_kzalloc(&pdev->dev, sizeof(*pc), GFP_KERNEL);
if (!pc) {
dev_err(&pdev->dev, "failed to allocate memory\n");
return -ENOMEM;
}
clk = devm_clk_get(&pdev->dev, "fck");
if (IS_ERR(clk)) {
dev_err(&pdev->dev, "failed to get clock\n");
return PTR_ERR(clk);
}
pc->clk_rate = clk_get_rate(clk);
if (!pc->clk_rate) {
dev_err(&pdev->dev, "failed to get clock rate\n");
return -EINVAL;
}
pc->chip.dev = &pdev->dev;
pc->chip.ops = &ecap_pwm_ops;
pc->chip.of_xlate = of_pwm_xlate_with_flags;
pc->chip.of_pwm_n_cells = 3;
pc->chip.base = -1;
pc->chip.npwm = 1;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!r) {
dev_err(&pdev->dev, "no memory resource defined\n");
return -ENODEV;
}
pc->mmio_base = devm_ioremap_resource(&pdev->dev, r);
if (IS_ERR(pc->mmio_base))
return PTR_ERR(pc->mmio_base);
ret = pwmchip_add(&pc->chip);
if (ret < 0) {
dev_err(&pdev->dev, "pwmchip_add() failed: %d\n", ret);
return ret;
}
pm_runtime_enable(&pdev->dev);
pm_runtime_get_sync(&pdev->dev);
status = pwmss_submodule_state_change(pdev->dev.parent,
PWMSS_ECAPCLK_EN);
if (!(status & PWMSS_ECAPCLK_EN_ACK)) {
dev_err(&pdev->dev, "PWMSS config space clock enable failed\n");
ret = -EINVAL;
goto pwmss_clk_failure;
}
pm_runtime_put_sync(&pdev->dev);
platform_set_drvdata(pdev, pc);
return 0;
pwmss_clk_failure:
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
pwmchip_remove(&pc->chip);
return ret;
}
static int ecap_pwm_remove(struct platform_device *pdev)
{
struct ecap_pwm_chip *pc = platform_get_drvdata(pdev);
pm_runtime_get_sync(&pdev->dev);
/*
* Due to hardware misbehaviour, acknowledge of the stop_req
* is missing. Hence checking of the status bit skipped.
*/
pwmss_submodule_state_change(pdev->dev.parent, PWMSS_ECAPCLK_STOP_REQ);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_put_sync(&pdev->dev);
pm_runtime_disable(&pdev->dev);
return pwmchip_remove(&pc->chip);
}
void ecap_pwm_save_context(struct ecap_pwm_chip *pc)
{
pm_runtime_get_sync(pc->chip.dev);
pc->ctx.ecctl2 = readw(pc->mmio_base + ECCTL2);
pc->ctx.cap4 = readl(pc->mmio_base + CAP4);
pc->ctx.cap3 = readl(pc->mmio_base + CAP3);
pm_runtime_put_sync(pc->chip.dev);
}
void ecap_pwm_restore_context(struct ecap_pwm_chip *pc)
{
writel(pc->ctx.cap3, pc->mmio_base + CAP3);
writel(pc->ctx.cap4, pc->mmio_base + CAP4);
writew(pc->ctx.ecctl2, pc->mmio_base + ECCTL2);
}
static int ecap_pwm_suspend(struct device *dev)
{
struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
struct pwm_device *pwm = pc->chip.pwms;
ecap_pwm_save_context(pc);
/* Disable explicitly if PWM is running */
if (test_bit(PWMF_ENABLED, &pwm->flags))
pm_runtime_put_sync(dev);
return 0;
}
static int ecap_pwm_resume(struct device *dev)
{
struct ecap_pwm_chip *pc = dev_get_drvdata(dev);
struct pwm_device *pwm = pc->chip.pwms;
/* Enable explicitly if PWM was running */
if (test_bit(PWMF_ENABLED, &pwm->flags))
pm_runtime_get_sync(dev);
ecap_pwm_restore_context(pc);
return 0;
}
static SIMPLE_DEV_PM_OPS(ecap_pwm_pm_ops, ecap_pwm_suspend, ecap_pwm_resume);
static struct platform_driver ecap_pwm_driver = {
.driver = {
.name = "ecap",
.owner = THIS_MODULE,
.of_match_table = ecap_of_match,
.pm = &ecap_pwm_pm_ops,
},
.probe = ecap_pwm_probe,
.remove = ecap_pwm_remove,
};
module_platform_driver(ecap_pwm_driver);
MODULE_DESCRIPTION("ECAP PWM driver");
MODULE_AUTHOR("Texas Instruments");
MODULE_LICENSE("GPL");