kernel-fxtec-pro1x/include/net/bond_options.h
Mahesh Bandewar d22a5fc0c3 bonding: Implement user key part of port_key in an AD system.
The port key has three components - user-key, speed-part, and duplex-part.
The LSBit is for the duplex-part, next 5 bits are for the speed while the
remaining 10 bits are the user defined key bits. Get these 10 bits
from the user-space (through the SysFs interface) and use it to form the
admin port-key. Allowed range for the user-key is 0 - 1023 (10 bits). If
it is not provided then use zero for the user-key-bits (default).

It can set using following example code -

   # modprobe bonding mode=4
   # usr_port_key=$(( RANDOM & 0x3FF ))
   # echo $usr_port_key > /sys/class/net/bond0/bonding/ad_user_port_key
   # echo +eth1 > /sys/class/net/bond0/bonding/slaves
   ...
   # ip link set bond0 up

Signed-off-by: Mahesh Bandewar <maheshb@google.com>
Reviewed-by: Nikolay Aleksandrov <nikolay@redhat.com>
[jt: * fixed up style issues reported by checkpatch
     * fixed up context from change in ad_actor_sys_prio patch]
Signed-off-by: Jonathan Toppins <jtoppins@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2015-05-11 10:59:32 -04:00

133 lines
3.8 KiB
C

/*
* drivers/net/bond/bond_options.h - bonding options
* Copyright (c) 2013 Nikolay Aleksandrov <nikolay@redhat.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#ifndef _NET_BOND_OPTIONS_H
#define _NET_BOND_OPTIONS_H
#define BOND_OPT_MAX_NAMELEN 32
#define BOND_OPT_VALID(opt) ((opt) < BOND_OPT_LAST)
#define BOND_MODE_ALL_EX(x) (~(x))
/* Option flags:
* BOND_OPTFLAG_NOSLAVES - check if the bond device is empty before setting
* BOND_OPTFLAG_IFDOWN - check if the bond device is down before setting
* BOND_OPTFLAG_RAWVAL - the option parses the value itself
*/
enum {
BOND_OPTFLAG_NOSLAVES = BIT(0),
BOND_OPTFLAG_IFDOWN = BIT(1),
BOND_OPTFLAG_RAWVAL = BIT(2)
};
/* Value type flags:
* BOND_VALFLAG_DEFAULT - mark the value as default
* BOND_VALFLAG_(MIN|MAX) - mark the value as min/max
*/
enum {
BOND_VALFLAG_DEFAULT = BIT(0),
BOND_VALFLAG_MIN = BIT(1),
BOND_VALFLAG_MAX = BIT(2)
};
/* Option IDs, their bit positions correspond to their IDs */
enum {
BOND_OPT_MODE,
BOND_OPT_PACKETS_PER_SLAVE,
BOND_OPT_XMIT_HASH,
BOND_OPT_ARP_VALIDATE,
BOND_OPT_ARP_ALL_TARGETS,
BOND_OPT_FAIL_OVER_MAC,
BOND_OPT_ARP_INTERVAL,
BOND_OPT_ARP_TARGETS,
BOND_OPT_DOWNDELAY,
BOND_OPT_UPDELAY,
BOND_OPT_LACP_RATE,
BOND_OPT_MINLINKS,
BOND_OPT_AD_SELECT,
BOND_OPT_NUM_PEER_NOTIF,
BOND_OPT_MIIMON,
BOND_OPT_PRIMARY,
BOND_OPT_PRIMARY_RESELECT,
BOND_OPT_USE_CARRIER,
BOND_OPT_ACTIVE_SLAVE,
BOND_OPT_QUEUE_ID,
BOND_OPT_ALL_SLAVES_ACTIVE,
BOND_OPT_RESEND_IGMP,
BOND_OPT_LP_INTERVAL,
BOND_OPT_SLAVES,
BOND_OPT_TLB_DYNAMIC_LB,
BOND_OPT_AD_ACTOR_SYS_PRIO,
BOND_OPT_AD_ACTOR_SYSTEM,
BOND_OPT_AD_USER_PORT_KEY,
BOND_OPT_LAST
};
/* This structure is used for storing option values and for passing option
* values when changing an option. The logic when used as an arg is as follows:
* - if string != NULL -> parse it, if the opt is RAW type then return it, else
* return the parse result
* - if string == NULL -> parse value
*/
struct bond_opt_value {
char *string;
u64 value;
u32 flags;
};
struct bonding;
struct bond_option {
int id;
const char *name;
const char *desc;
u32 flags;
/* unsuppmodes is used to denote modes in which the option isn't
* supported.
*/
unsigned long unsuppmodes;
/* supported values which this option can have, can be a subset of
* BOND_OPTVAL_RANGE's value range
*/
const struct bond_opt_value *values;
int (*set)(struct bonding *bond, const struct bond_opt_value *val);
};
int __bond_opt_set(struct bonding *bond, unsigned int option,
struct bond_opt_value *val);
int bond_opt_tryset_rtnl(struct bonding *bond, unsigned int option, char *buf);
const struct bond_opt_value *bond_opt_parse(const struct bond_option *opt,
struct bond_opt_value *val);
const struct bond_option *bond_opt_get(unsigned int option);
const struct bond_option *bond_opt_get_by_name(const char *name);
const struct bond_opt_value *bond_opt_get_val(unsigned int option, u64 val);
/* This helper is used to initialize a bond_opt_value structure for parameter
* passing. There should be either a valid string or value, but not both.
* When value is ULLONG_MAX then string will be used.
*/
static inline void __bond_opt_init(struct bond_opt_value *optval,
char *string, u64 value)
{
memset(optval, 0, sizeof(*optval));
optval->value = ULLONG_MAX;
if (value == ULLONG_MAX)
optval->string = string;
else
optval->value = value;
}
#define bond_opt_initval(optval, value) __bond_opt_init(optval, NULL, value)
#define bond_opt_initstr(optval, str) __bond_opt_init(optval, str, ULLONG_MAX)
void bond_option_arp_ip_targets_clear(struct bonding *bond);
#endif /* _NET_BOND_OPTIONS_H */