kernel-fxtec-pro1x/arch/x86/kernel/cpu/intel.c
Yinghai Lu 10a434fcb2 x86: remove cpu_vendor_dev
1. add c_x86_vendor into cpu_dev
2. change cpu_devs to static
3. check c_x86_vendor before put that cpu_dev into array
4. remove alignment for 64bit
5. order the sequence in cpu_devs according to link sequence...
   so could put intel at first, then amd...

Signed-off-by: Yinghai Lu <yhlu.kernel@gmail.com>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
2008-09-04 21:09:45 +02:00

312 lines
7.5 KiB
C

#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/string.h>
#include <linux/bitops.h>
#include <linux/smp.h>
#include <linux/thread_info.h>
#include <linux/module.h>
#include <asm/processor.h>
#include <asm/pgtable.h>
#include <asm/msr.h>
#include <asm/uaccess.h>
#include <asm/ptrace.h>
#include <asm/ds.h>
#include <asm/bugs.h>
#include "cpu.h"
#ifdef CONFIG_X86_LOCAL_APIC
#include <asm/mpspec.h>
#include <asm/apic.h>
#include <mach_apic.h>
#endif
static void __cpuinit early_init_intel(struct cpuinfo_x86 *c)
{
/* Netburst reports 64 bytes clflush size, but does IO in 128 bytes */
if (c->x86 == 15 && c->x86_cache_alignment == 64)
c->x86_cache_alignment = 128;
if ((c->x86 == 0xf && c->x86_model >= 0x03) ||
(c->x86 == 0x6 && c->x86_model >= 0x0e))
set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC);
}
/*
* Early probe support logic for ppro memory erratum #50
*
* This is called before we do cpu ident work
*/
int __cpuinit ppro_with_ram_bug(void)
{
/* Uses data from early_cpu_detect now */
if (boot_cpu_data.x86_vendor == X86_VENDOR_INTEL &&
boot_cpu_data.x86 == 6 &&
boot_cpu_data.x86_model == 1 &&
boot_cpu_data.x86_mask < 8) {
printk(KERN_INFO "Pentium Pro with Errata#50 detected. Taking evasive action.\n");
return 1;
}
return 0;
}
/*
* P4 Xeon errata 037 workaround.
* Hardware prefetcher may cause stale data to be loaded into the cache.
*/
static void __cpuinit Intel_errata_workarounds(struct cpuinfo_x86 *c)
{
unsigned long lo, hi;
if ((c->x86 == 15) && (c->x86_model == 1) && (c->x86_mask == 1)) {
rdmsr(MSR_IA32_MISC_ENABLE, lo, hi);
if ((lo & (1<<9)) == 0) {
printk (KERN_INFO "CPU: C0 stepping P4 Xeon detected.\n");
printk (KERN_INFO "CPU: Disabling hardware prefetching (Errata 037)\n");
lo |= (1<<9); /* Disable hw prefetching */
wrmsr (MSR_IA32_MISC_ENABLE, lo, hi);
}
}
}
/*
* find out the number of processor cores on the die
*/
static int __cpuinit num_cpu_cores(struct cpuinfo_x86 *c)
{
unsigned int eax, ebx, ecx, edx;
if (c->cpuid_level < 4)
return 1;
/* Intel has a non-standard dependency on %ecx for this CPUID level. */
cpuid_count(4, 0, &eax, &ebx, &ecx, &edx);
if (eax & 0x1f)
return ((eax >> 26) + 1);
else
return 1;
}
#ifdef CONFIG_X86_F00F_BUG
static void __cpuinit trap_init_f00f_bug(void)
{
__set_fixmap(FIX_F00F_IDT, __pa(&idt_table), PAGE_KERNEL_RO);
/*
* Update the IDT descriptor and reload the IDT so that
* it uses the read-only mapped virtual address.
*/
idt_descr.address = fix_to_virt(FIX_F00F_IDT);
load_idt(&idt_descr);
}
#endif
static void __cpuinit init_intel(struct cpuinfo_x86 *c)
{
unsigned int l2 = 0;
char *p = NULL;
early_init_intel(c);
#ifdef CONFIG_X86_F00F_BUG
/*
* All current models of Pentium and Pentium with MMX technology CPUs
* have the F0 0F bug, which lets nonprivileged users lock up the system.
* Note that the workaround only should be initialized once...
*/
c->f00f_bug = 0;
if (!paravirt_enabled() && c->x86 == 5) {
static int f00f_workaround_enabled;
c->f00f_bug = 1;
if (!f00f_workaround_enabled) {
trap_init_f00f_bug();
printk(KERN_NOTICE "Intel Pentium with F0 0F bug - workaround enabled.\n");
f00f_workaround_enabled = 1;
}
}
#endif
l2 = init_intel_cacheinfo(c);
if (c->cpuid_level > 9) {
unsigned eax = cpuid_eax(10);
/* Check for version and the number of counters */
if ((eax & 0xff) && (((eax>>8) & 0xff) > 1))
set_cpu_cap(c, X86_FEATURE_ARCH_PERFMON);
}
/* SEP CPUID bug: Pentium Pro reports SEP but doesn't have it until model 3 mask 3 */
if ((c->x86<<8 | c->x86_model<<4 | c->x86_mask) < 0x633)
clear_cpu_cap(c, X86_FEATURE_SEP);
/*
* Names for the Pentium II/Celeron processors
* detectable only by also checking the cache size.
* Dixon is NOT a Celeron.
*/
if (c->x86 == 6) {
switch (c->x86_model) {
case 5:
if (c->x86_mask == 0) {
if (l2 == 0)
p = "Celeron (Covington)";
else if (l2 == 256)
p = "Mobile Pentium II (Dixon)";
}
break;
case 6:
if (l2 == 128)
p = "Celeron (Mendocino)";
else if (c->x86_mask == 0 || c->x86_mask == 5)
p = "Celeron-A";
break;
case 8:
if (l2 == 128)
p = "Celeron (Coppermine)";
break;
}
}
if (p)
strcpy(c->x86_model_id, p);
c->x86_max_cores = num_cpu_cores(c);
detect_ht(c);
/* Work around errata */
Intel_errata_workarounds(c);
#ifdef CONFIG_X86_INTEL_USERCOPY
/*
* Set up the preferred alignment for movsl bulk memory moves
*/
switch (c->x86) {
case 4: /* 486: untested */
break;
case 5: /* Old Pentia: untested */
break;
case 6: /* PII/PIII only like movsl with 8-byte alignment */
movsl_mask.mask = 7;
break;
case 15: /* P4 is OK down to 8-byte alignment */
movsl_mask.mask = 7;
break;
}
#endif
if (cpu_has_xmm2)
set_cpu_cap(c, X86_FEATURE_LFENCE_RDTSC);
if (c->x86 == 15) {
set_cpu_cap(c, X86_FEATURE_P4);
}
if (c->x86 == 6)
set_cpu_cap(c, X86_FEATURE_P3);
if (cpu_has_ds) {
unsigned int l1;
rdmsr(MSR_IA32_MISC_ENABLE, l1, l2);
if (!(l1 & (1<<11)))
set_cpu_cap(c, X86_FEATURE_BTS);
if (!(l1 & (1<<12)))
set_cpu_cap(c, X86_FEATURE_PEBS);
}
if (cpu_has_bts)
ds_init_intel(c);
/*
* See if we have a good local APIC by checking for buggy Pentia,
* i.e. all B steppings and the C2 stepping of P54C when using their
* integrated APIC (see 11AP erratum in "Pentium Processor
* Specification Update").
*/
if (cpu_has_apic && (c->x86<<8 | c->x86_model<<4) == 0x520 &&
(c->x86_mask < 0x6 || c->x86_mask == 0xb))
set_cpu_cap(c, X86_FEATURE_11AP);
#ifdef CONFIG_X86_NUMAQ
numaq_tsc_disable();
#endif
}
static unsigned int __cpuinit intel_size_cache(struct cpuinfo_x86 *c, unsigned int size)
{
/*
* Intel PIII Tualatin. This comes in two flavours.
* One has 256kb of cache, the other 512. We have no way
* to determine which, so we use a boottime override
* for the 512kb model, and assume 256 otherwise.
*/
if ((c->x86 == 6) && (c->x86_model == 11) && (size == 0))
size = 256;
return size;
}
static struct cpu_dev intel_cpu_dev __cpuinitdata = {
.c_vendor = "Intel",
.c_ident = { "GenuineIntel" },
.c_models = {
{ .vendor = X86_VENDOR_INTEL, .family = 4, .model_names =
{
[0] = "486 DX-25/33",
[1] = "486 DX-50",
[2] = "486 SX",
[3] = "486 DX/2",
[4] = "486 SL",
[5] = "486 SX/2",
[7] = "486 DX/2-WB",
[8] = "486 DX/4",
[9] = "486 DX/4-WB"
}
},
{ .vendor = X86_VENDOR_INTEL, .family = 5, .model_names =
{
[0] = "Pentium 60/66 A-step",
[1] = "Pentium 60/66",
[2] = "Pentium 75 - 200",
[3] = "OverDrive PODP5V83",
[4] = "Pentium MMX",
[7] = "Mobile Pentium 75 - 200",
[8] = "Mobile Pentium MMX"
}
},
{ .vendor = X86_VENDOR_INTEL, .family = 6, .model_names =
{
[0] = "Pentium Pro A-step",
[1] = "Pentium Pro",
[3] = "Pentium II (Klamath)",
[4] = "Pentium II (Deschutes)",
[5] = "Pentium II (Deschutes)",
[6] = "Mobile Pentium II",
[7] = "Pentium III (Katmai)",
[8] = "Pentium III (Coppermine)",
[10] = "Pentium III (Cascades)",
[11] = "Pentium III (Tualatin)",
}
},
{ .vendor = X86_VENDOR_INTEL, .family = 15, .model_names =
{
[0] = "Pentium 4 (Unknown)",
[1] = "Pentium 4 (Willamette)",
[2] = "Pentium 4 (Northwood)",
[4] = "Pentium 4 (Foster)",
[5] = "Pentium 4 (Foster)",
}
},
},
.c_early_init = early_init_intel,
.c_init = init_intel,
.c_size_cache = intel_size_cache,
.c_x86_vendor = X86_VENDOR_INTEL,
};
cpu_dev_register(intel_cpu_dev);
/* arch_initcall(intel_cpu_init); */