1a5c226528
The main asm/blackfin.h header will pull in mach/blackfin.h to get all the fun Blackfin defines. So having any of the sub-mach headers trying to include asm/blackfin.h makes no sense -- punt it. The mach/blackfin.h header takes care of including the part-specific def headers which in turn will include any other needed def file. Similarly, it takes care of pulling in the part-specific cdef header. So move this logic out of the blackfin.h when necessary. Further, make sure the cdef headers do not waste time including the def headers again. Since all parts need the common def/cdef headers, move this logic out of the part-specific headers and into the mach/blackfin.h file. Finally, we need to split the BF539 def header since the BF538 does not have MXVR and we don't want to expose those MMRs. So now all parts should have the same behavior: mach/blackfin.h asm/def_LPBlackfin.h part-specific def.h if ! asm asm/cdef_LPBlackfin.h part-specific cdef.h And the sub def/cdef headers only tail into what they need. Signed-off-by: Mike Frysinger <vapier@gentoo.org>
1395 lines
87 KiB
C
1395 lines
87 KiB
C
/*
|
|
* Copyright 2005-2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the ADI BSD license or the GPL-2 (or later)
|
|
*/
|
|
|
|
#ifndef _DEF_BF561_H
|
|
#define _DEF_BF561_H
|
|
|
|
/*********************************************************************************** */
|
|
/* System MMR Register Map */
|
|
/*********************************************************************************** */
|
|
|
|
/* Clock and System Control (0xFFC00000 - 0xFFC000FF) */
|
|
|
|
#define PLL_CTL 0xFFC00000 /* PLL Control register (16-bit) */
|
|
#define PLL_DIV 0xFFC00004 /* PLL Divide Register (16-bit) */
|
|
#define VR_CTL 0xFFC00008 /* Voltage Regulator Control Register (16-bit) */
|
|
#define PLL_STAT 0xFFC0000C /* PLL Status register (16-bit) */
|
|
#define PLL_LOCKCNT 0xFFC00010 /* PLL Lock Count register (16-bit) */
|
|
#define CHIPID 0xFFC00014 /* Chip ID Register */
|
|
|
|
/* For MMR's that are reserved on Core B, set up defines to better integrate with other ports */
|
|
#define DOUBLE_FAULT (DOUBLE_FAULT_B|DOUBLE_FAULT_A)
|
|
#define RESET_DOUBLE (SWRST_DBL_FAULT_B|SWRST_DBL_FAULT_A)
|
|
#define RESET_WDOG (SWRST_WDT_B|SWRST_WDT_A)
|
|
#define RESET_SOFTWARE (SWRST_OCCURRED)
|
|
|
|
/* System Reset and Interrupt Controller registers for core A (0xFFC0 0100-0xFFC0 01FF) */
|
|
#define SWRST 0xFFC00100 /* Software Reset register */
|
|
#define SYSCR 0xFFC00104 /* System Reset Configuration register */
|
|
#define SIC_RVECT 0xFFC00108 /* SIC Reset Vector Address Register */
|
|
#define SIC_IMASK0 0xFFC0010C /* SIC Interrupt Mask register 0 */
|
|
#define SIC_IMASK1 0xFFC00110 /* SIC Interrupt Mask register 1 */
|
|
#define SIC_IAR0 0xFFC00124 /* SIC Interrupt Assignment Register 0 */
|
|
#define SIC_IAR1 0xFFC00128 /* SIC Interrupt Assignment Register 1 */
|
|
#define SIC_IAR2 0xFFC0012C /* SIC Interrupt Assignment Register 2 */
|
|
#define SIC_IAR3 0xFFC00130 /* SIC Interrupt Assignment Register 3 */
|
|
#define SIC_IAR4 0xFFC00134 /* SIC Interrupt Assignment Register 4 */
|
|
#define SIC_IAR5 0xFFC00138 /* SIC Interrupt Assignment Register 5 */
|
|
#define SIC_IAR6 0xFFC0013C /* SIC Interrupt Assignment Register 6 */
|
|
#define SIC_IAR7 0xFFC00140 /* SIC Interrupt Assignment Register 7 */
|
|
#define SIC_ISR0 0xFFC00114 /* SIC Interrupt Status register 0 */
|
|
#define SIC_ISR1 0xFFC00118 /* SIC Interrupt Status register 1 */
|
|
#define SIC_IWR0 0xFFC0011C /* SIC Interrupt Wakeup-Enable register 0 */
|
|
#define SIC_IWR1 0xFFC00120 /* SIC Interrupt Wakeup-Enable register 1 */
|
|
|
|
/* System Reset and Interrupt Controller registers for Core B (0xFFC0 1100-0xFFC0 11FF) */
|
|
#define SICB_SWRST 0xFFC01100 /* reserved */
|
|
#define SICB_SYSCR 0xFFC01104 /* reserved */
|
|
#define SICB_RVECT 0xFFC01108 /* SIC Reset Vector Address Register */
|
|
#define SICB_IMASK0 0xFFC0110C /* SIC Interrupt Mask register 0 */
|
|
#define SICB_IMASK1 0xFFC01110 /* SIC Interrupt Mask register 1 */
|
|
#define SICB_IAR0 0xFFC01124 /* SIC Interrupt Assignment Register 0 */
|
|
#define SICB_IAR1 0xFFC01128 /* SIC Interrupt Assignment Register 1 */
|
|
#define SICB_IAR2 0xFFC0112C /* SIC Interrupt Assignment Register 2 */
|
|
#define SICB_IAR3 0xFFC01130 /* SIC Interrupt Assignment Register 3 */
|
|
#define SICB_IAR4 0xFFC01134 /* SIC Interrupt Assignment Register 4 */
|
|
#define SICB_IAR5 0xFFC01138 /* SIC Interrupt Assignment Register 5 */
|
|
#define SICB_IAR6 0xFFC0113C /* SIC Interrupt Assignment Register 6 */
|
|
#define SICB_IAR7 0xFFC01140 /* SIC Interrupt Assignment Register 7 */
|
|
#define SICB_ISR0 0xFFC01114 /* SIC Interrupt Status register 0 */
|
|
#define SICB_ISR1 0xFFC01118 /* SIC Interrupt Status register 1 */
|
|
#define SICB_IWR0 0xFFC0111C /* SIC Interrupt Wakeup-Enable register 0 */
|
|
#define SICB_IWR1 0xFFC01120 /* SIC Interrupt Wakeup-Enable register 1 */
|
|
|
|
/* Watchdog Timer registers for Core A (0xFFC0 0200-0xFFC0 02FF) */
|
|
#define WDOGA_CTL 0xFFC00200 /* Watchdog Control register */
|
|
#define WDOGA_CNT 0xFFC00204 /* Watchdog Count register */
|
|
#define WDOGA_STAT 0xFFC00208 /* Watchdog Status register */
|
|
|
|
/* Watchdog Timer registers for Core B (0xFFC0 1200-0xFFC0 12FF) */
|
|
#define WDOGB_CTL 0xFFC01200 /* Watchdog Control register */
|
|
#define WDOGB_CNT 0xFFC01204 /* Watchdog Count register */
|
|
#define WDOGB_STAT 0xFFC01208 /* Watchdog Status register */
|
|
|
|
/* UART Controller (0xFFC00400 - 0xFFC004FF) */
|
|
|
|
/*
|
|
* Because include/linux/serial_reg.h have defined UART_*,
|
|
* So we define blackfin uart regs to BFIN_UART0_*.
|
|
*/
|
|
#define BFIN_UART_THR 0xFFC00400 /* Transmit Holding register */
|
|
#define BFIN_UART_RBR 0xFFC00400 /* Receive Buffer register */
|
|
#define BFIN_UART_DLL 0xFFC00400 /* Divisor Latch (Low-Byte) */
|
|
#define BFIN_UART_IER 0xFFC00404 /* Interrupt Enable Register */
|
|
#define BFIN_UART_DLH 0xFFC00404 /* Divisor Latch (High-Byte) */
|
|
#define BFIN_UART_IIR 0xFFC00408 /* Interrupt Identification Register */
|
|
#define BFIN_UART_LCR 0xFFC0040C /* Line Control Register */
|
|
#define BFIN_UART_MCR 0xFFC00410 /* Modem Control Register */
|
|
#define BFIN_UART_LSR 0xFFC00414 /* Line Status Register */
|
|
#define BFIN_UART_MSR 0xFFC00418 /* Modem Status Register */
|
|
#define BFIN_UART_SCR 0xFFC0041C /* SCR Scratch Register */
|
|
#define BFIN_UART_GCTL 0xFFC00424 /* Global Control Register */
|
|
|
|
/* SPI Controller (0xFFC00500 - 0xFFC005FF) */
|
|
#define SPI0_REGBASE 0xFFC00500
|
|
#define SPI_CTL 0xFFC00500 /* SPI Control Register */
|
|
#define SPI_FLG 0xFFC00504 /* SPI Flag register */
|
|
#define SPI_STAT 0xFFC00508 /* SPI Status register */
|
|
#define SPI_TDBR 0xFFC0050C /* SPI Transmit Data Buffer Register */
|
|
#define SPI_RDBR 0xFFC00510 /* SPI Receive Data Buffer Register */
|
|
#define SPI_BAUD 0xFFC00514 /* SPI Baud rate Register */
|
|
#define SPI_SHADOW 0xFFC00518 /* SPI_RDBR Shadow Register */
|
|
|
|
/* Timer 0-7 registers (0xFFC0 0600-0xFFC0 06FF) */
|
|
#define TIMER0_CONFIG 0xFFC00600 /* Timer0 Configuration register */
|
|
#define TIMER0_COUNTER 0xFFC00604 /* Timer0 Counter register */
|
|
#define TIMER0_PERIOD 0xFFC00608 /* Timer0 Period register */
|
|
#define TIMER0_WIDTH 0xFFC0060C /* Timer0 Width register */
|
|
|
|
#define TIMER1_CONFIG 0xFFC00610 /* Timer1 Configuration register */
|
|
#define TIMER1_COUNTER 0xFFC00614 /* Timer1 Counter register */
|
|
#define TIMER1_PERIOD 0xFFC00618 /* Timer1 Period register */
|
|
#define TIMER1_WIDTH 0xFFC0061C /* Timer1 Width register */
|
|
|
|
#define TIMER2_CONFIG 0xFFC00620 /* Timer2 Configuration register */
|
|
#define TIMER2_COUNTER 0xFFC00624 /* Timer2 Counter register */
|
|
#define TIMER2_PERIOD 0xFFC00628 /* Timer2 Period register */
|
|
#define TIMER2_WIDTH 0xFFC0062C /* Timer2 Width register */
|
|
|
|
#define TIMER3_CONFIG 0xFFC00630 /* Timer3 Configuration register */
|
|
#define TIMER3_COUNTER 0xFFC00634 /* Timer3 Counter register */
|
|
#define TIMER3_PERIOD 0xFFC00638 /* Timer3 Period register */
|
|
#define TIMER3_WIDTH 0xFFC0063C /* Timer3 Width register */
|
|
|
|
#define TIMER4_CONFIG 0xFFC00640 /* Timer4 Configuration register */
|
|
#define TIMER4_COUNTER 0xFFC00644 /* Timer4 Counter register */
|
|
#define TIMER4_PERIOD 0xFFC00648 /* Timer4 Period register */
|
|
#define TIMER4_WIDTH 0xFFC0064C /* Timer4 Width register */
|
|
|
|
#define TIMER5_CONFIG 0xFFC00650 /* Timer5 Configuration register */
|
|
#define TIMER5_COUNTER 0xFFC00654 /* Timer5 Counter register */
|
|
#define TIMER5_PERIOD 0xFFC00658 /* Timer5 Period register */
|
|
#define TIMER5_WIDTH 0xFFC0065C /* Timer5 Width register */
|
|
|
|
#define TIMER6_CONFIG 0xFFC00660 /* Timer6 Configuration register */
|
|
#define TIMER6_COUNTER 0xFFC00664 /* Timer6 Counter register */
|
|
#define TIMER6_PERIOD 0xFFC00668 /* Timer6 Period register */
|
|
#define TIMER6_WIDTH 0xFFC0066C /* Timer6 Width register */
|
|
|
|
#define TIMER7_CONFIG 0xFFC00670 /* Timer7 Configuration register */
|
|
#define TIMER7_COUNTER 0xFFC00674 /* Timer7 Counter register */
|
|
#define TIMER7_PERIOD 0xFFC00678 /* Timer7 Period register */
|
|
#define TIMER7_WIDTH 0xFFC0067C /* Timer7 Width register */
|
|
|
|
#define TMRS8_ENABLE 0xFFC00680 /* Timer Enable Register */
|
|
#define TMRS8_DISABLE 0xFFC00684 /* Timer Disable register */
|
|
#define TMRS8_STATUS 0xFFC00688 /* Timer Status register */
|
|
|
|
/* Timer registers 8-11 (0xFFC0 1600-0xFFC0 16FF) */
|
|
#define TIMER8_CONFIG 0xFFC01600 /* Timer8 Configuration register */
|
|
#define TIMER8_COUNTER 0xFFC01604 /* Timer8 Counter register */
|
|
#define TIMER8_PERIOD 0xFFC01608 /* Timer8 Period register */
|
|
#define TIMER8_WIDTH 0xFFC0160C /* Timer8 Width register */
|
|
|
|
#define TIMER9_CONFIG 0xFFC01610 /* Timer9 Configuration register */
|
|
#define TIMER9_COUNTER 0xFFC01614 /* Timer9 Counter register */
|
|
#define TIMER9_PERIOD 0xFFC01618 /* Timer9 Period register */
|
|
#define TIMER9_WIDTH 0xFFC0161C /* Timer9 Width register */
|
|
|
|
#define TIMER10_CONFIG 0xFFC01620 /* Timer10 Configuration register */
|
|
#define TIMER10_COUNTER 0xFFC01624 /* Timer10 Counter register */
|
|
#define TIMER10_PERIOD 0xFFC01628 /* Timer10 Period register */
|
|
#define TIMER10_WIDTH 0xFFC0162C /* Timer10 Width register */
|
|
|
|
#define TIMER11_CONFIG 0xFFC01630 /* Timer11 Configuration register */
|
|
#define TIMER11_COUNTER 0xFFC01634 /* Timer11 Counter register */
|
|
#define TIMER11_PERIOD 0xFFC01638 /* Timer11 Period register */
|
|
#define TIMER11_WIDTH 0xFFC0163C /* Timer11 Width register */
|
|
|
|
#define TMRS4_ENABLE 0xFFC01640 /* Timer Enable Register */
|
|
#define TMRS4_DISABLE 0xFFC01644 /* Timer Disable register */
|
|
#define TMRS4_STATUS 0xFFC01648 /* Timer Status register */
|
|
|
|
/* Programmable Flag 0 registers (0xFFC0 0700-0xFFC0 07FF) */
|
|
#define FIO0_FLAG_D 0xFFC00700 /* Flag Data register */
|
|
#define FIO0_FLAG_C 0xFFC00704 /* Flag Clear register */
|
|
#define FIO0_FLAG_S 0xFFC00708 /* Flag Set register */
|
|
#define FIO0_FLAG_T 0xFFC0070C /* Flag Toggle register */
|
|
#define FIO0_MASKA_D 0xFFC00710 /* Flag Mask Interrupt A Data register */
|
|
#define FIO0_MASKA_C 0xFFC00714 /* Flag Mask Interrupt A Clear register */
|
|
#define FIO0_MASKA_S 0xFFC00718 /* Flag Mask Interrupt A Set register */
|
|
#define FIO0_MASKA_T 0xFFC0071C /* Flag Mask Interrupt A Toggle register */
|
|
#define FIO0_MASKB_D 0xFFC00720 /* Flag Mask Interrupt B Data register */
|
|
#define FIO0_MASKB_C 0xFFC00724 /* Flag Mask Interrupt B Clear register */
|
|
#define FIO0_MASKB_S 0xFFC00728 /* Flag Mask Interrupt B Set register */
|
|
#define FIO0_MASKB_T 0xFFC0072C /* Flag Mask Interrupt B Toggle register */
|
|
#define FIO0_DIR 0xFFC00730 /* Flag Direction register */
|
|
#define FIO0_POLAR 0xFFC00734 /* Flag Polarity register */
|
|
#define FIO0_EDGE 0xFFC00738 /* Flag Interrupt Sensitivity register */
|
|
#define FIO0_BOTH 0xFFC0073C /* Flag Set on Both Edges register */
|
|
#define FIO0_INEN 0xFFC00740 /* Flag Input Enable register */
|
|
|
|
/* Programmable Flag 1 registers (0xFFC0 1500-0xFFC0 15FF) */
|
|
#define FIO1_FLAG_D 0xFFC01500 /* Flag Data register (mask used to directly */
|
|
#define FIO1_FLAG_C 0xFFC01504 /* Flag Clear register */
|
|
#define FIO1_FLAG_S 0xFFC01508 /* Flag Set register */
|
|
#define FIO1_FLAG_T 0xFFC0150C /* Flag Toggle register (mask used to */
|
|
#define FIO1_MASKA_D 0xFFC01510 /* Flag Mask Interrupt A Data register */
|
|
#define FIO1_MASKA_C 0xFFC01514 /* Flag Mask Interrupt A Clear register */
|
|
#define FIO1_MASKA_S 0xFFC01518 /* Flag Mask Interrupt A Set register */
|
|
#define FIO1_MASKA_T 0xFFC0151C /* Flag Mask Interrupt A Toggle register */
|
|
#define FIO1_MASKB_D 0xFFC01520 /* Flag Mask Interrupt B Data register */
|
|
#define FIO1_MASKB_C 0xFFC01524 /* Flag Mask Interrupt B Clear register */
|
|
#define FIO1_MASKB_S 0xFFC01528 /* Flag Mask Interrupt B Set register */
|
|
#define FIO1_MASKB_T 0xFFC0152C /* Flag Mask Interrupt B Toggle register */
|
|
#define FIO1_DIR 0xFFC01530 /* Flag Direction register */
|
|
#define FIO1_POLAR 0xFFC01534 /* Flag Polarity register */
|
|
#define FIO1_EDGE 0xFFC01538 /* Flag Interrupt Sensitivity register */
|
|
#define FIO1_BOTH 0xFFC0153C /* Flag Set on Both Edges register */
|
|
#define FIO1_INEN 0xFFC01540 /* Flag Input Enable register */
|
|
|
|
/* Programmable Flag registers (0xFFC0 1700-0xFFC0 17FF) */
|
|
#define FIO2_FLAG_D 0xFFC01700 /* Flag Data register (mask used to directly */
|
|
#define FIO2_FLAG_C 0xFFC01704 /* Flag Clear register */
|
|
#define FIO2_FLAG_S 0xFFC01708 /* Flag Set register */
|
|
#define FIO2_FLAG_T 0xFFC0170C /* Flag Toggle register (mask used to */
|
|
#define FIO2_MASKA_D 0xFFC01710 /* Flag Mask Interrupt A Data register */
|
|
#define FIO2_MASKA_C 0xFFC01714 /* Flag Mask Interrupt A Clear register */
|
|
#define FIO2_MASKA_S 0xFFC01718 /* Flag Mask Interrupt A Set register */
|
|
#define FIO2_MASKA_T 0xFFC0171C /* Flag Mask Interrupt A Toggle register */
|
|
#define FIO2_MASKB_D 0xFFC01720 /* Flag Mask Interrupt B Data register */
|
|
#define FIO2_MASKB_C 0xFFC01724 /* Flag Mask Interrupt B Clear register */
|
|
#define FIO2_MASKB_S 0xFFC01728 /* Flag Mask Interrupt B Set register */
|
|
#define FIO2_MASKB_T 0xFFC0172C /* Flag Mask Interrupt B Toggle register */
|
|
#define FIO2_DIR 0xFFC01730 /* Flag Direction register */
|
|
#define FIO2_POLAR 0xFFC01734 /* Flag Polarity register */
|
|
#define FIO2_EDGE 0xFFC01738 /* Flag Interrupt Sensitivity register */
|
|
#define FIO2_BOTH 0xFFC0173C /* Flag Set on Both Edges register */
|
|
#define FIO2_INEN 0xFFC01740 /* Flag Input Enable register */
|
|
|
|
/* SPORT0 Controller (0xFFC00800 - 0xFFC008FF) */
|
|
#define SPORT0_TCR1 0xFFC00800 /* SPORT0 Transmit Configuration 1 Register */
|
|
#define SPORT0_TCR2 0xFFC00804 /* SPORT0 Transmit Configuration 2 Register */
|
|
#define SPORT0_TCLKDIV 0xFFC00808 /* SPORT0 Transmit Clock Divider */
|
|
#define SPORT0_TFSDIV 0xFFC0080C /* SPORT0 Transmit Frame Sync Divider */
|
|
#define SPORT0_TX 0xFFC00810 /* SPORT0 TX Data Register */
|
|
#define SPORT0_RX 0xFFC00818 /* SPORT0 RX Data Register */
|
|
#define SPORT0_RCR1 0xFFC00820 /* SPORT0 Transmit Configuration 1 Register */
|
|
#define SPORT0_RCR2 0xFFC00824 /* SPORT0 Transmit Configuration 2 Register */
|
|
#define SPORT0_RCLKDIV 0xFFC00828 /* SPORT0 Receive Clock Divider */
|
|
#define SPORT0_RFSDIV 0xFFC0082C /* SPORT0 Receive Frame Sync Divider */
|
|
#define SPORT0_STAT 0xFFC00830 /* SPORT0 Status Register */
|
|
#define SPORT0_CHNL 0xFFC00834 /* SPORT0 Current Channel Register */
|
|
#define SPORT0_MCMC1 0xFFC00838 /* SPORT0 Multi-Channel Configuration Register 1 */
|
|
#define SPORT0_MCMC2 0xFFC0083C /* SPORT0 Multi-Channel Configuration Register 2 */
|
|
#define SPORT0_MTCS0 0xFFC00840 /* SPORT0 Multi-Channel Transmit Select Register 0 */
|
|
#define SPORT0_MTCS1 0xFFC00844 /* SPORT0 Multi-Channel Transmit Select Register 1 */
|
|
#define SPORT0_MTCS2 0xFFC00848 /* SPORT0 Multi-Channel Transmit Select Register 2 */
|
|
#define SPORT0_MTCS3 0xFFC0084C /* SPORT0 Multi-Channel Transmit Select Register 3 */
|
|
#define SPORT0_MRCS0 0xFFC00850 /* SPORT0 Multi-Channel Receive Select Register 0 */
|
|
#define SPORT0_MRCS1 0xFFC00854 /* SPORT0 Multi-Channel Receive Select Register 1 */
|
|
#define SPORT0_MRCS2 0xFFC00858 /* SPORT0 Multi-Channel Receive Select Register 2 */
|
|
#define SPORT0_MRCS3 0xFFC0085C /* SPORT0 Multi-Channel Receive Select Register 3 */
|
|
|
|
/* SPORT1 Controller (0xFFC00900 - 0xFFC009FF) */
|
|
#define SPORT1_TCR1 0xFFC00900 /* SPORT1 Transmit Configuration 1 Register */
|
|
#define SPORT1_TCR2 0xFFC00904 /* SPORT1 Transmit Configuration 2 Register */
|
|
#define SPORT1_TCLKDIV 0xFFC00908 /* SPORT1 Transmit Clock Divider */
|
|
#define SPORT1_TFSDIV 0xFFC0090C /* SPORT1 Transmit Frame Sync Divider */
|
|
#define SPORT1_TX 0xFFC00910 /* SPORT1 TX Data Register */
|
|
#define SPORT1_RX 0xFFC00918 /* SPORT1 RX Data Register */
|
|
#define SPORT1_RCR1 0xFFC00920 /* SPORT1 Transmit Configuration 1 Register */
|
|
#define SPORT1_RCR2 0xFFC00924 /* SPORT1 Transmit Configuration 2 Register */
|
|
#define SPORT1_RCLKDIV 0xFFC00928 /* SPORT1 Receive Clock Divider */
|
|
#define SPORT1_RFSDIV 0xFFC0092C /* SPORT1 Receive Frame Sync Divider */
|
|
#define SPORT1_STAT 0xFFC00930 /* SPORT1 Status Register */
|
|
#define SPORT1_CHNL 0xFFC00934 /* SPORT1 Current Channel Register */
|
|
#define SPORT1_MCMC1 0xFFC00938 /* SPORT1 Multi-Channel Configuration Register 1 */
|
|
#define SPORT1_MCMC2 0xFFC0093C /* SPORT1 Multi-Channel Configuration Register 2 */
|
|
#define SPORT1_MTCS0 0xFFC00940 /* SPORT1 Multi-Channel Transmit Select Register 0 */
|
|
#define SPORT1_MTCS1 0xFFC00944 /* SPORT1 Multi-Channel Transmit Select Register 1 */
|
|
#define SPORT1_MTCS2 0xFFC00948 /* SPORT1 Multi-Channel Transmit Select Register 2 */
|
|
#define SPORT1_MTCS3 0xFFC0094C /* SPORT1 Multi-Channel Transmit Select Register 3 */
|
|
#define SPORT1_MRCS0 0xFFC00950 /* SPORT1 Multi-Channel Receive Select Register 0 */
|
|
#define SPORT1_MRCS1 0xFFC00954 /* SPORT1 Multi-Channel Receive Select Register 1 */
|
|
#define SPORT1_MRCS2 0xFFC00958 /* SPORT1 Multi-Channel Receive Select Register 2 */
|
|
#define SPORT1_MRCS3 0xFFC0095C /* SPORT1 Multi-Channel Receive Select Register 3 */
|
|
|
|
/* Asynchronous Memory Controller - External Bus Interface Unit */
|
|
#define EBIU_AMGCTL 0xFFC00A00 /* Asynchronous Memory Global Control Register */
|
|
#define EBIU_AMBCTL0 0xFFC00A04 /* Asynchronous Memory Bank Control Register 0 */
|
|
#define EBIU_AMBCTL1 0xFFC00A08 /* Asynchronous Memory Bank Control Register 1 */
|
|
|
|
/* SDRAM Controller External Bus Interface Unit (0xFFC00A00 - 0xFFC00AFF) */
|
|
#define EBIU_SDGCTL 0xFFC00A10 /* SDRAM Global Control Register */
|
|
#define EBIU_SDBCTL 0xFFC00A14 /* SDRAM Bank Control Register */
|
|
#define EBIU_SDRRC 0xFFC00A18 /* SDRAM Refresh Rate Control Register */
|
|
#define EBIU_SDSTAT 0xFFC00A1C /* SDRAM Status Register */
|
|
|
|
/* Parallel Peripheral Interface (PPI) 0 registers (0xFFC0 1000-0xFFC0 10FF) */
|
|
#define PPI0_CONTROL 0xFFC01000 /* PPI0 Control register */
|
|
#define PPI0_STATUS 0xFFC01004 /* PPI0 Status register */
|
|
#define PPI0_COUNT 0xFFC01008 /* PPI0 Transfer Count register */
|
|
#define PPI0_DELAY 0xFFC0100C /* PPI0 Delay Count register */
|
|
#define PPI0_FRAME 0xFFC01010 /* PPI0 Frame Length register */
|
|
|
|
/*Parallel Peripheral Interface (PPI) 1 registers (0xFFC0 1300-0xFFC0 13FF) */
|
|
#define PPI1_CONTROL 0xFFC01300 /* PPI1 Control register */
|
|
#define PPI1_STATUS 0xFFC01304 /* PPI1 Status register */
|
|
#define PPI1_COUNT 0xFFC01308 /* PPI1 Transfer Count register */
|
|
#define PPI1_DELAY 0xFFC0130C /* PPI1 Delay Count register */
|
|
#define PPI1_FRAME 0xFFC01310 /* PPI1 Frame Length register */
|
|
|
|
/*DMA traffic control registers */
|
|
#define DMAC0_TC_PER 0xFFC00B0C /* Traffic control periods */
|
|
#define DMAC0_TC_CNT 0xFFC00B10 /* Traffic control current counts */
|
|
#define DMAC1_TC_PER 0xFFC01B0C /* Traffic control periods */
|
|
#define DMAC1_TC_CNT 0xFFC01B10 /* Traffic control current counts */
|
|
|
|
/* DMA1 Controller registers (0xFFC0 1C00-0xFFC0 1FFF) */
|
|
#define DMA1_0_CONFIG 0xFFC01C08 /* DMA1 Channel 0 Configuration register */
|
|
#define DMA1_0_NEXT_DESC_PTR 0xFFC01C00 /* DMA1 Channel 0 Next Descripter Ptr Reg */
|
|
#define DMA1_0_START_ADDR 0xFFC01C04 /* DMA1 Channel 0 Start Address */
|
|
#define DMA1_0_X_COUNT 0xFFC01C10 /* DMA1 Channel 0 Inner Loop Count */
|
|
#define DMA1_0_Y_COUNT 0xFFC01C18 /* DMA1 Channel 0 Outer Loop Count */
|
|
#define DMA1_0_X_MODIFY 0xFFC01C14 /* DMA1 Channel 0 Inner Loop Addr Increment */
|
|
#define DMA1_0_Y_MODIFY 0xFFC01C1C /* DMA1 Channel 0 Outer Loop Addr Increment */
|
|
#define DMA1_0_CURR_DESC_PTR 0xFFC01C20 /* DMA1 Channel 0 Current Descriptor Pointer */
|
|
#define DMA1_0_CURR_ADDR 0xFFC01C24 /* DMA1 Channel 0 Current Address Pointer */
|
|
#define DMA1_0_CURR_X_COUNT 0xFFC01C30 /* DMA1 Channel 0 Current Inner Loop Count */
|
|
#define DMA1_0_CURR_Y_COUNT 0xFFC01C38 /* DMA1 Channel 0 Current Outer Loop Count */
|
|
#define DMA1_0_IRQ_STATUS 0xFFC01C28 /* DMA1 Channel 0 Interrupt/Status Register */
|
|
#define DMA1_0_PERIPHERAL_MAP 0xFFC01C2C /* DMA1 Channel 0 Peripheral Map Register */
|
|
|
|
#define DMA1_1_CONFIG 0xFFC01C48 /* DMA1 Channel 1 Configuration register */
|
|
#define DMA1_1_NEXT_DESC_PTR 0xFFC01C40 /* DMA1 Channel 1 Next Descripter Ptr Reg */
|
|
#define DMA1_1_START_ADDR 0xFFC01C44 /* DMA1 Channel 1 Start Address */
|
|
#define DMA1_1_X_COUNT 0xFFC01C50 /* DMA1 Channel 1 Inner Loop Count */
|
|
#define DMA1_1_Y_COUNT 0xFFC01C58 /* DMA1 Channel 1 Outer Loop Count */
|
|
#define DMA1_1_X_MODIFY 0xFFC01C54 /* DMA1 Channel 1 Inner Loop Addr Increment */
|
|
#define DMA1_1_Y_MODIFY 0xFFC01C5C /* DMA1 Channel 1 Outer Loop Addr Increment */
|
|
#define DMA1_1_CURR_DESC_PTR 0xFFC01C60 /* DMA1 Channel 1 Current Descriptor Pointer */
|
|
#define DMA1_1_CURR_ADDR 0xFFC01C64 /* DMA1 Channel 1 Current Address Pointer */
|
|
#define DMA1_1_CURR_X_COUNT 0xFFC01C70 /* DMA1 Channel 1 Current Inner Loop Count */
|
|
#define DMA1_1_CURR_Y_COUNT 0xFFC01C78 /* DMA1 Channel 1 Current Outer Loop Count */
|
|
#define DMA1_1_IRQ_STATUS 0xFFC01C68 /* DMA1 Channel 1 Interrupt/Status Register */
|
|
#define DMA1_1_PERIPHERAL_MAP 0xFFC01C6C /* DMA1 Channel 1 Peripheral Map Register */
|
|
|
|
#define DMA1_2_CONFIG 0xFFC01C88 /* DMA1 Channel 2 Configuration register */
|
|
#define DMA1_2_NEXT_DESC_PTR 0xFFC01C80 /* DMA1 Channel 2 Next Descripter Ptr Reg */
|
|
#define DMA1_2_START_ADDR 0xFFC01C84 /* DMA1 Channel 2 Start Address */
|
|
#define DMA1_2_X_COUNT 0xFFC01C90 /* DMA1 Channel 2 Inner Loop Count */
|
|
#define DMA1_2_Y_COUNT 0xFFC01C98 /* DMA1 Channel 2 Outer Loop Count */
|
|
#define DMA1_2_X_MODIFY 0xFFC01C94 /* DMA1 Channel 2 Inner Loop Addr Increment */
|
|
#define DMA1_2_Y_MODIFY 0xFFC01C9C /* DMA1 Channel 2 Outer Loop Addr Increment */
|
|
#define DMA1_2_CURR_DESC_PTR 0xFFC01CA0 /* DMA1 Channel 2 Current Descriptor Pointer */
|
|
#define DMA1_2_CURR_ADDR 0xFFC01CA4 /* DMA1 Channel 2 Current Address Pointer */
|
|
#define DMA1_2_CURR_X_COUNT 0xFFC01CB0 /* DMA1 Channel 2 Current Inner Loop Count */
|
|
#define DMA1_2_CURR_Y_COUNT 0xFFC01CB8 /* DMA1 Channel 2 Current Outer Loop Count */
|
|
#define DMA1_2_IRQ_STATUS 0xFFC01CA8 /* DMA1 Channel 2 Interrupt/Status Register */
|
|
#define DMA1_2_PERIPHERAL_MAP 0xFFC01CAC /* DMA1 Channel 2 Peripheral Map Register */
|
|
|
|
#define DMA1_3_CONFIG 0xFFC01CC8 /* DMA1 Channel 3 Configuration register */
|
|
#define DMA1_3_NEXT_DESC_PTR 0xFFC01CC0 /* DMA1 Channel 3 Next Descripter Ptr Reg */
|
|
#define DMA1_3_START_ADDR 0xFFC01CC4 /* DMA1 Channel 3 Start Address */
|
|
#define DMA1_3_X_COUNT 0xFFC01CD0 /* DMA1 Channel 3 Inner Loop Count */
|
|
#define DMA1_3_Y_COUNT 0xFFC01CD8 /* DMA1 Channel 3 Outer Loop Count */
|
|
#define DMA1_3_X_MODIFY 0xFFC01CD4 /* DMA1 Channel 3 Inner Loop Addr Increment */
|
|
#define DMA1_3_Y_MODIFY 0xFFC01CDC /* DMA1 Channel 3 Outer Loop Addr Increment */
|
|
#define DMA1_3_CURR_DESC_PTR 0xFFC01CE0 /* DMA1 Channel 3 Current Descriptor Pointer */
|
|
#define DMA1_3_CURR_ADDR 0xFFC01CE4 /* DMA1 Channel 3 Current Address Pointer */
|
|
#define DMA1_3_CURR_X_COUNT 0xFFC01CF0 /* DMA1 Channel 3 Current Inner Loop Count */
|
|
#define DMA1_3_CURR_Y_COUNT 0xFFC01CF8 /* DMA1 Channel 3 Current Outer Loop Count */
|
|
#define DMA1_3_IRQ_STATUS 0xFFC01CE8 /* DMA1 Channel 3 Interrupt/Status Register */
|
|
#define DMA1_3_PERIPHERAL_MAP 0xFFC01CEC /* DMA1 Channel 3 Peripheral Map Register */
|
|
|
|
#define DMA1_4_CONFIG 0xFFC01D08 /* DMA1 Channel 4 Configuration register */
|
|
#define DMA1_4_NEXT_DESC_PTR 0xFFC01D00 /* DMA1 Channel 4 Next Descripter Ptr Reg */
|
|
#define DMA1_4_START_ADDR 0xFFC01D04 /* DMA1 Channel 4 Start Address */
|
|
#define DMA1_4_X_COUNT 0xFFC01D10 /* DMA1 Channel 4 Inner Loop Count */
|
|
#define DMA1_4_Y_COUNT 0xFFC01D18 /* DMA1 Channel 4 Outer Loop Count */
|
|
#define DMA1_4_X_MODIFY 0xFFC01D14 /* DMA1 Channel 4 Inner Loop Addr Increment */
|
|
#define DMA1_4_Y_MODIFY 0xFFC01D1C /* DMA1 Channel 4 Outer Loop Addr Increment */
|
|
#define DMA1_4_CURR_DESC_PTR 0xFFC01D20 /* DMA1 Channel 4 Current Descriptor Pointer */
|
|
#define DMA1_4_CURR_ADDR 0xFFC01D24 /* DMA1 Channel 4 Current Address Pointer */
|
|
#define DMA1_4_CURR_X_COUNT 0xFFC01D30 /* DMA1 Channel 4 Current Inner Loop Count */
|
|
#define DMA1_4_CURR_Y_COUNT 0xFFC01D38 /* DMA1 Channel 4 Current Outer Loop Count */
|
|
#define DMA1_4_IRQ_STATUS 0xFFC01D28 /* DMA1 Channel 4 Interrupt/Status Register */
|
|
#define DMA1_4_PERIPHERAL_MAP 0xFFC01D2C /* DMA1 Channel 4 Peripheral Map Register */
|
|
|
|
#define DMA1_5_CONFIG 0xFFC01D48 /* DMA1 Channel 5 Configuration register */
|
|
#define DMA1_5_NEXT_DESC_PTR 0xFFC01D40 /* DMA1 Channel 5 Next Descripter Ptr Reg */
|
|
#define DMA1_5_START_ADDR 0xFFC01D44 /* DMA1 Channel 5 Start Address */
|
|
#define DMA1_5_X_COUNT 0xFFC01D50 /* DMA1 Channel 5 Inner Loop Count */
|
|
#define DMA1_5_Y_COUNT 0xFFC01D58 /* DMA1 Channel 5 Outer Loop Count */
|
|
#define DMA1_5_X_MODIFY 0xFFC01D54 /* DMA1 Channel 5 Inner Loop Addr Increment */
|
|
#define DMA1_5_Y_MODIFY 0xFFC01D5C /* DMA1 Channel 5 Outer Loop Addr Increment */
|
|
#define DMA1_5_CURR_DESC_PTR 0xFFC01D60 /* DMA1 Channel 5 Current Descriptor Pointer */
|
|
#define DMA1_5_CURR_ADDR 0xFFC01D64 /* DMA1 Channel 5 Current Address Pointer */
|
|
#define DMA1_5_CURR_X_COUNT 0xFFC01D70 /* DMA1 Channel 5 Current Inner Loop Count */
|
|
#define DMA1_5_CURR_Y_COUNT 0xFFC01D78 /* DMA1 Channel 5 Current Outer Loop Count */
|
|
#define DMA1_5_IRQ_STATUS 0xFFC01D68 /* DMA1 Channel 5 Interrupt/Status Register */
|
|
#define DMA1_5_PERIPHERAL_MAP 0xFFC01D6C /* DMA1 Channel 5 Peripheral Map Register */
|
|
|
|
#define DMA1_6_CONFIG 0xFFC01D88 /* DMA1 Channel 6 Configuration register */
|
|
#define DMA1_6_NEXT_DESC_PTR 0xFFC01D80 /* DMA1 Channel 6 Next Descripter Ptr Reg */
|
|
#define DMA1_6_START_ADDR 0xFFC01D84 /* DMA1 Channel 6 Start Address */
|
|
#define DMA1_6_X_COUNT 0xFFC01D90 /* DMA1 Channel 6 Inner Loop Count */
|
|
#define DMA1_6_Y_COUNT 0xFFC01D98 /* DMA1 Channel 6 Outer Loop Count */
|
|
#define DMA1_6_X_MODIFY 0xFFC01D94 /* DMA1 Channel 6 Inner Loop Addr Increment */
|
|
#define DMA1_6_Y_MODIFY 0xFFC01D9C /* DMA1 Channel 6 Outer Loop Addr Increment */
|
|
#define DMA1_6_CURR_DESC_PTR 0xFFC01DA0 /* DMA1 Channel 6 Current Descriptor Pointer */
|
|
#define DMA1_6_CURR_ADDR 0xFFC01DA4 /* DMA1 Channel 6 Current Address Pointer */
|
|
#define DMA1_6_CURR_X_COUNT 0xFFC01DB0 /* DMA1 Channel 6 Current Inner Loop Count */
|
|
#define DMA1_6_CURR_Y_COUNT 0xFFC01DB8 /* DMA1 Channel 6 Current Outer Loop Count */
|
|
#define DMA1_6_IRQ_STATUS 0xFFC01DA8 /* DMA1 Channel 6 Interrupt/Status Register */
|
|
#define DMA1_6_PERIPHERAL_MAP 0xFFC01DAC /* DMA1 Channel 6 Peripheral Map Register */
|
|
|
|
#define DMA1_7_CONFIG 0xFFC01DC8 /* DMA1 Channel 7 Configuration register */
|
|
#define DMA1_7_NEXT_DESC_PTR 0xFFC01DC0 /* DMA1 Channel 7 Next Descripter Ptr Reg */
|
|
#define DMA1_7_START_ADDR 0xFFC01DC4 /* DMA1 Channel 7 Start Address */
|
|
#define DMA1_7_X_COUNT 0xFFC01DD0 /* DMA1 Channel 7 Inner Loop Count */
|
|
#define DMA1_7_Y_COUNT 0xFFC01DD8 /* DMA1 Channel 7 Outer Loop Count */
|
|
#define DMA1_7_X_MODIFY 0xFFC01DD4 /* DMA1 Channel 7 Inner Loop Addr Increment */
|
|
#define DMA1_7_Y_MODIFY 0xFFC01DDC /* DMA1 Channel 7 Outer Loop Addr Increment */
|
|
#define DMA1_7_CURR_DESC_PTR 0xFFC01DE0 /* DMA1 Channel 7 Current Descriptor Pointer */
|
|
#define DMA1_7_CURR_ADDR 0xFFC01DE4 /* DMA1 Channel 7 Current Address Pointer */
|
|
#define DMA1_7_CURR_X_COUNT 0xFFC01DF0 /* DMA1 Channel 7 Current Inner Loop Count */
|
|
#define DMA1_7_CURR_Y_COUNT 0xFFC01DF8 /* DMA1 Channel 7 Current Outer Loop Count */
|
|
#define DMA1_7_IRQ_STATUS 0xFFC01DE8 /* DMA1 Channel 7 Interrupt/Status Register */
|
|
#define DMA1_7_PERIPHERAL_MAP 0xFFC01DEC /* DMA1 Channel 7 Peripheral Map Register */
|
|
|
|
#define DMA1_8_CONFIG 0xFFC01E08 /* DMA1 Channel 8 Configuration register */
|
|
#define DMA1_8_NEXT_DESC_PTR 0xFFC01E00 /* DMA1 Channel 8 Next Descripter Ptr Reg */
|
|
#define DMA1_8_START_ADDR 0xFFC01E04 /* DMA1 Channel 8 Start Address */
|
|
#define DMA1_8_X_COUNT 0xFFC01E10 /* DMA1 Channel 8 Inner Loop Count */
|
|
#define DMA1_8_Y_COUNT 0xFFC01E18 /* DMA1 Channel 8 Outer Loop Count */
|
|
#define DMA1_8_X_MODIFY 0xFFC01E14 /* DMA1 Channel 8 Inner Loop Addr Increment */
|
|
#define DMA1_8_Y_MODIFY 0xFFC01E1C /* DMA1 Channel 8 Outer Loop Addr Increment */
|
|
#define DMA1_8_CURR_DESC_PTR 0xFFC01E20 /* DMA1 Channel 8 Current Descriptor Pointer */
|
|
#define DMA1_8_CURR_ADDR 0xFFC01E24 /* DMA1 Channel 8 Current Address Pointer */
|
|
#define DMA1_8_CURR_X_COUNT 0xFFC01E30 /* DMA1 Channel 8 Current Inner Loop Count */
|
|
#define DMA1_8_CURR_Y_COUNT 0xFFC01E38 /* DMA1 Channel 8 Current Outer Loop Count */
|
|
#define DMA1_8_IRQ_STATUS 0xFFC01E28 /* DMA1 Channel 8 Interrupt/Status Register */
|
|
#define DMA1_8_PERIPHERAL_MAP 0xFFC01E2C /* DMA1 Channel 8 Peripheral Map Register */
|
|
|
|
#define DMA1_9_CONFIG 0xFFC01E48 /* DMA1 Channel 9 Configuration register */
|
|
#define DMA1_9_NEXT_DESC_PTR 0xFFC01E40 /* DMA1 Channel 9 Next Descripter Ptr Reg */
|
|
#define DMA1_9_START_ADDR 0xFFC01E44 /* DMA1 Channel 9 Start Address */
|
|
#define DMA1_9_X_COUNT 0xFFC01E50 /* DMA1 Channel 9 Inner Loop Count */
|
|
#define DMA1_9_Y_COUNT 0xFFC01E58 /* DMA1 Channel 9 Outer Loop Count */
|
|
#define DMA1_9_X_MODIFY 0xFFC01E54 /* DMA1 Channel 9 Inner Loop Addr Increment */
|
|
#define DMA1_9_Y_MODIFY 0xFFC01E5C /* DMA1 Channel 9 Outer Loop Addr Increment */
|
|
#define DMA1_9_CURR_DESC_PTR 0xFFC01E60 /* DMA1 Channel 9 Current Descriptor Pointer */
|
|
#define DMA1_9_CURR_ADDR 0xFFC01E64 /* DMA1 Channel 9 Current Address Pointer */
|
|
#define DMA1_9_CURR_X_COUNT 0xFFC01E70 /* DMA1 Channel 9 Current Inner Loop Count */
|
|
#define DMA1_9_CURR_Y_COUNT 0xFFC01E78 /* DMA1 Channel 9 Current Outer Loop Count */
|
|
#define DMA1_9_IRQ_STATUS 0xFFC01E68 /* DMA1 Channel 9 Interrupt/Status Register */
|
|
#define DMA1_9_PERIPHERAL_MAP 0xFFC01E6C /* DMA1 Channel 9 Peripheral Map Register */
|
|
|
|
#define DMA1_10_CONFIG 0xFFC01E88 /* DMA1 Channel 10 Configuration register */
|
|
#define DMA1_10_NEXT_DESC_PTR 0xFFC01E80 /* DMA1 Channel 10 Next Descripter Ptr Reg */
|
|
#define DMA1_10_START_ADDR 0xFFC01E84 /* DMA1 Channel 10 Start Address */
|
|
#define DMA1_10_X_COUNT 0xFFC01E90 /* DMA1 Channel 10 Inner Loop Count */
|
|
#define DMA1_10_Y_COUNT 0xFFC01E98 /* DMA1 Channel 10 Outer Loop Count */
|
|
#define DMA1_10_X_MODIFY 0xFFC01E94 /* DMA1 Channel 10 Inner Loop Addr Increment */
|
|
#define DMA1_10_Y_MODIFY 0xFFC01E9C /* DMA1 Channel 10 Outer Loop Addr Increment */
|
|
#define DMA1_10_CURR_DESC_PTR 0xFFC01EA0 /* DMA1 Channel 10 Current Descriptor Pointer */
|
|
#define DMA1_10_CURR_ADDR 0xFFC01EA4 /* DMA1 Channel 10 Current Address Pointer */
|
|
#define DMA1_10_CURR_X_COUNT 0xFFC01EB0 /* DMA1 Channel 10 Current Inner Loop Count */
|
|
#define DMA1_10_CURR_Y_COUNT 0xFFC01EB8 /* DMA1 Channel 10 Current Outer Loop Count */
|
|
#define DMA1_10_IRQ_STATUS 0xFFC01EA8 /* DMA1 Channel 10 Interrupt/Status Register */
|
|
#define DMA1_10_PERIPHERAL_MAP 0xFFC01EAC /* DMA1 Channel 10 Peripheral Map Register */
|
|
|
|
#define DMA1_11_CONFIG 0xFFC01EC8 /* DMA1 Channel 11 Configuration register */
|
|
#define DMA1_11_NEXT_DESC_PTR 0xFFC01EC0 /* DMA1 Channel 11 Next Descripter Ptr Reg */
|
|
#define DMA1_11_START_ADDR 0xFFC01EC4 /* DMA1 Channel 11 Start Address */
|
|
#define DMA1_11_X_COUNT 0xFFC01ED0 /* DMA1 Channel 11 Inner Loop Count */
|
|
#define DMA1_11_Y_COUNT 0xFFC01ED8 /* DMA1 Channel 11 Outer Loop Count */
|
|
#define DMA1_11_X_MODIFY 0xFFC01ED4 /* DMA1 Channel 11 Inner Loop Addr Increment */
|
|
#define DMA1_11_Y_MODIFY 0xFFC01EDC /* DMA1 Channel 11 Outer Loop Addr Increment */
|
|
#define DMA1_11_CURR_DESC_PTR 0xFFC01EE0 /* DMA1 Channel 11 Current Descriptor Pointer */
|
|
#define DMA1_11_CURR_ADDR 0xFFC01EE4 /* DMA1 Channel 11 Current Address Pointer */
|
|
#define DMA1_11_CURR_X_COUNT 0xFFC01EF0 /* DMA1 Channel 11 Current Inner Loop Count */
|
|
#define DMA1_11_CURR_Y_COUNT 0xFFC01EF8 /* DMA1 Channel 11 Current Outer Loop Count */
|
|
#define DMA1_11_IRQ_STATUS 0xFFC01EE8 /* DMA1 Channel 11 Interrupt/Status Register */
|
|
#define DMA1_11_PERIPHERAL_MAP 0xFFC01EEC /* DMA1 Channel 11 Peripheral Map Register */
|
|
|
|
/* Memory DMA1 Controller registers (0xFFC0 1E80-0xFFC0 1FFF) */
|
|
#define MDMA_D2_CONFIG 0xFFC01F08 /*MemDMA1 Stream 0 Destination Configuration */
|
|
#define MDMA_D2_NEXT_DESC_PTR 0xFFC01F00 /*MemDMA1 Stream 0 Destination Next Descriptor Ptr Reg */
|
|
#define MDMA_D2_START_ADDR 0xFFC01F04 /*MemDMA1 Stream 0 Destination Start Address */
|
|
#define MDMA_D2_X_COUNT 0xFFC01F10 /*MemDMA1 Stream 0 Destination Inner-Loop Count */
|
|
#define MDMA_D2_Y_COUNT 0xFFC01F18 /*MemDMA1 Stream 0 Destination Outer-Loop Count */
|
|
#define MDMA_D2_X_MODIFY 0xFFC01F14 /*MemDMA1 Stream 0 Dest Inner-Loop Address-Increment */
|
|
#define MDMA_D2_Y_MODIFY 0xFFC01F1C /*MemDMA1 Stream 0 Dest Outer-Loop Address-Increment */
|
|
#define MDMA_D2_CURR_DESC_PTR 0xFFC01F20 /*MemDMA1 Stream 0 Dest Current Descriptor Ptr reg */
|
|
#define MDMA_D2_CURR_ADDR 0xFFC01F24 /*MemDMA1 Stream 0 Destination Current Address */
|
|
#define MDMA_D2_CURR_X_COUNT 0xFFC01F30 /*MemDMA1 Stream 0 Dest Current Inner-Loop Count */
|
|
#define MDMA_D2_CURR_Y_COUNT 0xFFC01F38 /*MemDMA1 Stream 0 Dest Current Outer-Loop Count */
|
|
#define MDMA_D2_IRQ_STATUS 0xFFC01F28 /*MemDMA1 Stream 0 Destination Interrupt/Status */
|
|
#define MDMA_D2_PERIPHERAL_MAP 0xFFC01F2C /*MemDMA1 Stream 0 Destination Peripheral Map */
|
|
|
|
#define MDMA_S2_CONFIG 0xFFC01F48 /*MemDMA1 Stream 0 Source Configuration */
|
|
#define MDMA_S2_NEXT_DESC_PTR 0xFFC01F40 /*MemDMA1 Stream 0 Source Next Descriptor Ptr Reg */
|
|
#define MDMA_S2_START_ADDR 0xFFC01F44 /*MemDMA1 Stream 0 Source Start Address */
|
|
#define MDMA_S2_X_COUNT 0xFFC01F50 /*MemDMA1 Stream 0 Source Inner-Loop Count */
|
|
#define MDMA_S2_Y_COUNT 0xFFC01F58 /*MemDMA1 Stream 0 Source Outer-Loop Count */
|
|
#define MDMA_S2_X_MODIFY 0xFFC01F54 /*MemDMA1 Stream 0 Source Inner-Loop Address-Increment */
|
|
#define MDMA_S2_Y_MODIFY 0xFFC01F5C /*MemDMA1 Stream 0 Source Outer-Loop Address-Increment */
|
|
#define MDMA_S2_CURR_DESC_PTR 0xFFC01F60 /*MemDMA1 Stream 0 Source Current Descriptor Ptr reg */
|
|
#define MDMA_S2_CURR_ADDR 0xFFC01F64 /*MemDMA1 Stream 0 Source Current Address */
|
|
#define MDMA_S2_CURR_X_COUNT 0xFFC01F70 /*MemDMA1 Stream 0 Source Current Inner-Loop Count */
|
|
#define MDMA_S2_CURR_Y_COUNT 0xFFC01F78 /*MemDMA1 Stream 0 Source Current Outer-Loop Count */
|
|
#define MDMA_S2_IRQ_STATUS 0xFFC01F68 /*MemDMA1 Stream 0 Source Interrupt/Status */
|
|
#define MDMA_S2_PERIPHERAL_MAP 0xFFC01F6C /*MemDMA1 Stream 0 Source Peripheral Map */
|
|
|
|
#define MDMA_D3_CONFIG 0xFFC01F88 /*MemDMA1 Stream 1 Destination Configuration */
|
|
#define MDMA_D3_NEXT_DESC_PTR 0xFFC01F80 /*MemDMA1 Stream 1 Destination Next Descriptor Ptr Reg */
|
|
#define MDMA_D3_START_ADDR 0xFFC01F84 /*MemDMA1 Stream 1 Destination Start Address */
|
|
#define MDMA_D3_X_COUNT 0xFFC01F90 /*MemDMA1 Stream 1 Destination Inner-Loop Count */
|
|
#define MDMA_D3_Y_COUNT 0xFFC01F98 /*MemDMA1 Stream 1 Destination Outer-Loop Count */
|
|
#define MDMA_D3_X_MODIFY 0xFFC01F94 /*MemDMA1 Stream 1 Dest Inner-Loop Address-Increment */
|
|
#define MDMA_D3_Y_MODIFY 0xFFC01F9C /*MemDMA1 Stream 1 Dest Outer-Loop Address-Increment */
|
|
#define MDMA_D3_CURR_DESC_PTR 0xFFC01FA0 /*MemDMA1 Stream 1 Dest Current Descriptor Ptr reg */
|
|
#define MDMA_D3_CURR_ADDR 0xFFC01FA4 /*MemDMA1 Stream 1 Dest Current Address */
|
|
#define MDMA_D3_CURR_X_COUNT 0xFFC01FB0 /*MemDMA1 Stream 1 Dest Current Inner-Loop Count */
|
|
#define MDMA_D3_CURR_Y_COUNT 0xFFC01FB8 /*MemDMA1 Stream 1 Dest Current Outer-Loop Count */
|
|
#define MDMA_D3_IRQ_STATUS 0xFFC01FA8 /*MemDMA1 Stream 1 Dest Interrupt/Status */
|
|
#define MDMA_D3_PERIPHERAL_MAP 0xFFC01FAC /*MemDMA1 Stream 1 Dest Peripheral Map */
|
|
|
|
#define MDMA_S3_CONFIG 0xFFC01FC8 /*MemDMA1 Stream 1 Source Configuration */
|
|
#define MDMA_S3_NEXT_DESC_PTR 0xFFC01FC0 /*MemDMA1 Stream 1 Source Next Descriptor Ptr Reg */
|
|
#define MDMA_S3_START_ADDR 0xFFC01FC4 /*MemDMA1 Stream 1 Source Start Address */
|
|
#define MDMA_S3_X_COUNT 0xFFC01FD0 /*MemDMA1 Stream 1 Source Inner-Loop Count */
|
|
#define MDMA_S3_Y_COUNT 0xFFC01FD8 /*MemDMA1 Stream 1 Source Outer-Loop Count */
|
|
#define MDMA_S3_X_MODIFY 0xFFC01FD4 /*MemDMA1 Stream 1 Source Inner-Loop Address-Increment */
|
|
#define MDMA_S3_Y_MODIFY 0xFFC01FDC /*MemDMA1 Stream 1 Source Outer-Loop Address-Increment */
|
|
#define MDMA_S3_CURR_DESC_PTR 0xFFC01FE0 /*MemDMA1 Stream 1 Source Current Descriptor Ptr reg */
|
|
#define MDMA_S3_CURR_ADDR 0xFFC01FE4 /*MemDMA1 Stream 1 Source Current Address */
|
|
#define MDMA_S3_CURR_X_COUNT 0xFFC01FF0 /*MemDMA1 Stream 1 Source Current Inner-Loop Count */
|
|
#define MDMA_S3_CURR_Y_COUNT 0xFFC01FF8 /*MemDMA1 Stream 1 Source Current Outer-Loop Count */
|
|
#define MDMA_S3_IRQ_STATUS 0xFFC01FE8 /*MemDMA1 Stream 1 Source Interrupt/Status */
|
|
#define MDMA_S3_PERIPHERAL_MAP 0xFFC01FEC /*MemDMA1 Stream 1 Source Peripheral Map */
|
|
|
|
/* DMA2 Controller registers (0xFFC0 0C00-0xFFC0 0DFF) */
|
|
#define DMA2_0_CONFIG 0xFFC00C08 /* DMA2 Channel 0 Configuration register */
|
|
#define DMA2_0_NEXT_DESC_PTR 0xFFC00C00 /* DMA2 Channel 0 Next Descripter Ptr Reg */
|
|
#define DMA2_0_START_ADDR 0xFFC00C04 /* DMA2 Channel 0 Start Address */
|
|
#define DMA2_0_X_COUNT 0xFFC00C10 /* DMA2 Channel 0 Inner Loop Count */
|
|
#define DMA2_0_Y_COUNT 0xFFC00C18 /* DMA2 Channel 0 Outer Loop Count */
|
|
#define DMA2_0_X_MODIFY 0xFFC00C14 /* DMA2 Channel 0 Inner Loop Addr Increment */
|
|
#define DMA2_0_Y_MODIFY 0xFFC00C1C /* DMA2 Channel 0 Outer Loop Addr Increment */
|
|
#define DMA2_0_CURR_DESC_PTR 0xFFC00C20 /* DMA2 Channel 0 Current Descriptor Pointer */
|
|
#define DMA2_0_CURR_ADDR 0xFFC00C24 /* DMA2 Channel 0 Current Address Pointer */
|
|
#define DMA2_0_CURR_X_COUNT 0xFFC00C30 /* DMA2 Channel 0 Current Inner Loop Count */
|
|
#define DMA2_0_CURR_Y_COUNT 0xFFC00C38 /* DMA2 Channel 0 Current Outer Loop Count */
|
|
#define DMA2_0_IRQ_STATUS 0xFFC00C28 /* DMA2 Channel 0 Interrupt/Status Register */
|
|
#define DMA2_0_PERIPHERAL_MAP 0xFFC00C2C /* DMA2 Channel 0 Peripheral Map Register */
|
|
|
|
#define DMA2_1_CONFIG 0xFFC00C48 /* DMA2 Channel 1 Configuration register */
|
|
#define DMA2_1_NEXT_DESC_PTR 0xFFC00C40 /* DMA2 Channel 1 Next Descripter Ptr Reg */
|
|
#define DMA2_1_START_ADDR 0xFFC00C44 /* DMA2 Channel 1 Start Address */
|
|
#define DMA2_1_X_COUNT 0xFFC00C50 /* DMA2 Channel 1 Inner Loop Count */
|
|
#define DMA2_1_Y_COUNT 0xFFC00C58 /* DMA2 Channel 1 Outer Loop Count */
|
|
#define DMA2_1_X_MODIFY 0xFFC00C54 /* DMA2 Channel 1 Inner Loop Addr Increment */
|
|
#define DMA2_1_Y_MODIFY 0xFFC00C5C /* DMA2 Channel 1 Outer Loop Addr Increment */
|
|
#define DMA2_1_CURR_DESC_PTR 0xFFC00C60 /* DMA2 Channel 1 Current Descriptor Pointer */
|
|
#define DMA2_1_CURR_ADDR 0xFFC00C64 /* DMA2 Channel 1 Current Address Pointer */
|
|
#define DMA2_1_CURR_X_COUNT 0xFFC00C70 /* DMA2 Channel 1 Current Inner Loop Count */
|
|
#define DMA2_1_CURR_Y_COUNT 0xFFC00C78 /* DMA2 Channel 1 Current Outer Loop Count */
|
|
#define DMA2_1_IRQ_STATUS 0xFFC00C68 /* DMA2 Channel 1 Interrupt/Status Register */
|
|
#define DMA2_1_PERIPHERAL_MAP 0xFFC00C6C /* DMA2 Channel 1 Peripheral Map Register */
|
|
|
|
#define DMA2_2_CONFIG 0xFFC00C88 /* DMA2 Channel 2 Configuration register */
|
|
#define DMA2_2_NEXT_DESC_PTR 0xFFC00C80 /* DMA2 Channel 2 Next Descripter Ptr Reg */
|
|
#define DMA2_2_START_ADDR 0xFFC00C84 /* DMA2 Channel 2 Start Address */
|
|
#define DMA2_2_X_COUNT 0xFFC00C90 /* DMA2 Channel 2 Inner Loop Count */
|
|
#define DMA2_2_Y_COUNT 0xFFC00C98 /* DMA2 Channel 2 Outer Loop Count */
|
|
#define DMA2_2_X_MODIFY 0xFFC00C94 /* DMA2 Channel 2 Inner Loop Addr Increment */
|
|
#define DMA2_2_Y_MODIFY 0xFFC00C9C /* DMA2 Channel 2 Outer Loop Addr Increment */
|
|
#define DMA2_2_CURR_DESC_PTR 0xFFC00CA0 /* DMA2 Channel 2 Current Descriptor Pointer */
|
|
#define DMA2_2_CURR_ADDR 0xFFC00CA4 /* DMA2 Channel 2 Current Address Pointer */
|
|
#define DMA2_2_CURR_X_COUNT 0xFFC00CB0 /* DMA2 Channel 2 Current Inner Loop Count */
|
|
#define DMA2_2_CURR_Y_COUNT 0xFFC00CB8 /* DMA2 Channel 2 Current Outer Loop Count */
|
|
#define DMA2_2_IRQ_STATUS 0xFFC00CA8 /* DMA2 Channel 2 Interrupt/Status Register */
|
|
#define DMA2_2_PERIPHERAL_MAP 0xFFC00CAC /* DMA2 Channel 2 Peripheral Map Register */
|
|
|
|
#define DMA2_3_CONFIG 0xFFC00CC8 /* DMA2 Channel 3 Configuration register */
|
|
#define DMA2_3_NEXT_DESC_PTR 0xFFC00CC0 /* DMA2 Channel 3 Next Descripter Ptr Reg */
|
|
#define DMA2_3_START_ADDR 0xFFC00CC4 /* DMA2 Channel 3 Start Address */
|
|
#define DMA2_3_X_COUNT 0xFFC00CD0 /* DMA2 Channel 3 Inner Loop Count */
|
|
#define DMA2_3_Y_COUNT 0xFFC00CD8 /* DMA2 Channel 3 Outer Loop Count */
|
|
#define DMA2_3_X_MODIFY 0xFFC00CD4 /* DMA2 Channel 3 Inner Loop Addr Increment */
|
|
#define DMA2_3_Y_MODIFY 0xFFC00CDC /* DMA2 Channel 3 Outer Loop Addr Increment */
|
|
#define DMA2_3_CURR_DESC_PTR 0xFFC00CE0 /* DMA2 Channel 3 Current Descriptor Pointer */
|
|
#define DMA2_3_CURR_ADDR 0xFFC00CE4 /* DMA2 Channel 3 Current Address Pointer */
|
|
#define DMA2_3_CURR_X_COUNT 0xFFC00CF0 /* DMA2 Channel 3 Current Inner Loop Count */
|
|
#define DMA2_3_CURR_Y_COUNT 0xFFC00CF8 /* DMA2 Channel 3 Current Outer Loop Count */
|
|
#define DMA2_3_IRQ_STATUS 0xFFC00CE8 /* DMA2 Channel 3 Interrupt/Status Register */
|
|
#define DMA2_3_PERIPHERAL_MAP 0xFFC00CEC /* DMA2 Channel 3 Peripheral Map Register */
|
|
|
|
#define DMA2_4_CONFIG 0xFFC00D08 /* DMA2 Channel 4 Configuration register */
|
|
#define DMA2_4_NEXT_DESC_PTR 0xFFC00D00 /* DMA2 Channel 4 Next Descripter Ptr Reg */
|
|
#define DMA2_4_START_ADDR 0xFFC00D04 /* DMA2 Channel 4 Start Address */
|
|
#define DMA2_4_X_COUNT 0xFFC00D10 /* DMA2 Channel 4 Inner Loop Count */
|
|
#define DMA2_4_Y_COUNT 0xFFC00D18 /* DMA2 Channel 4 Outer Loop Count */
|
|
#define DMA2_4_X_MODIFY 0xFFC00D14 /* DMA2 Channel 4 Inner Loop Addr Increment */
|
|
#define DMA2_4_Y_MODIFY 0xFFC00D1C /* DMA2 Channel 4 Outer Loop Addr Increment */
|
|
#define DMA2_4_CURR_DESC_PTR 0xFFC00D20 /* DMA2 Channel 4 Current Descriptor Pointer */
|
|
#define DMA2_4_CURR_ADDR 0xFFC00D24 /* DMA2 Channel 4 Current Address Pointer */
|
|
#define DMA2_4_CURR_X_COUNT 0xFFC00D30 /* DMA2 Channel 4 Current Inner Loop Count */
|
|
#define DMA2_4_CURR_Y_COUNT 0xFFC00D38 /* DMA2 Channel 4 Current Outer Loop Count */
|
|
#define DMA2_4_IRQ_STATUS 0xFFC00D28 /* DMA2 Channel 4 Interrupt/Status Register */
|
|
#define DMA2_4_PERIPHERAL_MAP 0xFFC00D2C /* DMA2 Channel 4 Peripheral Map Register */
|
|
|
|
#define DMA2_5_CONFIG 0xFFC00D48 /* DMA2 Channel 5 Configuration register */
|
|
#define DMA2_5_NEXT_DESC_PTR 0xFFC00D40 /* DMA2 Channel 5 Next Descripter Ptr Reg */
|
|
#define DMA2_5_START_ADDR 0xFFC00D44 /* DMA2 Channel 5 Start Address */
|
|
#define DMA2_5_X_COUNT 0xFFC00D50 /* DMA2 Channel 5 Inner Loop Count */
|
|
#define DMA2_5_Y_COUNT 0xFFC00D58 /* DMA2 Channel 5 Outer Loop Count */
|
|
#define DMA2_5_X_MODIFY 0xFFC00D54 /* DMA2 Channel 5 Inner Loop Addr Increment */
|
|
#define DMA2_5_Y_MODIFY 0xFFC00D5C /* DMA2 Channel 5 Outer Loop Addr Increment */
|
|
#define DMA2_5_CURR_DESC_PTR 0xFFC00D60 /* DMA2 Channel 5 Current Descriptor Pointer */
|
|
#define DMA2_5_CURR_ADDR 0xFFC00D64 /* DMA2 Channel 5 Current Address Pointer */
|
|
#define DMA2_5_CURR_X_COUNT 0xFFC00D70 /* DMA2 Channel 5 Current Inner Loop Count */
|
|
#define DMA2_5_CURR_Y_COUNT 0xFFC00D78 /* DMA2 Channel 5 Current Outer Loop Count */
|
|
#define DMA2_5_IRQ_STATUS 0xFFC00D68 /* DMA2 Channel 5 Interrupt/Status Register */
|
|
#define DMA2_5_PERIPHERAL_MAP 0xFFC00D6C /* DMA2 Channel 5 Peripheral Map Register */
|
|
|
|
#define DMA2_6_CONFIG 0xFFC00D88 /* DMA2 Channel 6 Configuration register */
|
|
#define DMA2_6_NEXT_DESC_PTR 0xFFC00D80 /* DMA2 Channel 6 Next Descripter Ptr Reg */
|
|
#define DMA2_6_START_ADDR 0xFFC00D84 /* DMA2 Channel 6 Start Address */
|
|
#define DMA2_6_X_COUNT 0xFFC00D90 /* DMA2 Channel 6 Inner Loop Count */
|
|
#define DMA2_6_Y_COUNT 0xFFC00D98 /* DMA2 Channel 6 Outer Loop Count */
|
|
#define DMA2_6_X_MODIFY 0xFFC00D94 /* DMA2 Channel 6 Inner Loop Addr Increment */
|
|
#define DMA2_6_Y_MODIFY 0xFFC00D9C /* DMA2 Channel 6 Outer Loop Addr Increment */
|
|
#define DMA2_6_CURR_DESC_PTR 0xFFC00DA0 /* DMA2 Channel 6 Current Descriptor Pointer */
|
|
#define DMA2_6_CURR_ADDR 0xFFC00DA4 /* DMA2 Channel 6 Current Address Pointer */
|
|
#define DMA2_6_CURR_X_COUNT 0xFFC00DB0 /* DMA2 Channel 6 Current Inner Loop Count */
|
|
#define DMA2_6_CURR_Y_COUNT 0xFFC00DB8 /* DMA2 Channel 6 Current Outer Loop Count */
|
|
#define DMA2_6_IRQ_STATUS 0xFFC00DA8 /* DMA2 Channel 6 Interrupt/Status Register */
|
|
#define DMA2_6_PERIPHERAL_MAP 0xFFC00DAC /* DMA2 Channel 6 Peripheral Map Register */
|
|
|
|
#define DMA2_7_CONFIG 0xFFC00DC8 /* DMA2 Channel 7 Configuration register */
|
|
#define DMA2_7_NEXT_DESC_PTR 0xFFC00DC0 /* DMA2 Channel 7 Next Descripter Ptr Reg */
|
|
#define DMA2_7_START_ADDR 0xFFC00DC4 /* DMA2 Channel 7 Start Address */
|
|
#define DMA2_7_X_COUNT 0xFFC00DD0 /* DMA2 Channel 7 Inner Loop Count */
|
|
#define DMA2_7_Y_COUNT 0xFFC00DD8 /* DMA2 Channel 7 Outer Loop Count */
|
|
#define DMA2_7_X_MODIFY 0xFFC00DD4 /* DMA2 Channel 7 Inner Loop Addr Increment */
|
|
#define DMA2_7_Y_MODIFY 0xFFC00DDC /* DMA2 Channel 7 Outer Loop Addr Increment */
|
|
#define DMA2_7_CURR_DESC_PTR 0xFFC00DE0 /* DMA2 Channel 7 Current Descriptor Pointer */
|
|
#define DMA2_7_CURR_ADDR 0xFFC00DE4 /* DMA2 Channel 7 Current Address Pointer */
|
|
#define DMA2_7_CURR_X_COUNT 0xFFC00DF0 /* DMA2 Channel 7 Current Inner Loop Count */
|
|
#define DMA2_7_CURR_Y_COUNT 0xFFC00DF8 /* DMA2 Channel 7 Current Outer Loop Count */
|
|
#define DMA2_7_IRQ_STATUS 0xFFC00DE8 /* DMA2 Channel 7 Interrupt/Status Register */
|
|
#define DMA2_7_PERIPHERAL_MAP 0xFFC00DEC /* DMA2 Channel 7 Peripheral Map Register */
|
|
|
|
#define DMA2_8_CONFIG 0xFFC00E08 /* DMA2 Channel 8 Configuration register */
|
|
#define DMA2_8_NEXT_DESC_PTR 0xFFC00E00 /* DMA2 Channel 8 Next Descripter Ptr Reg */
|
|
#define DMA2_8_START_ADDR 0xFFC00E04 /* DMA2 Channel 8 Start Address */
|
|
#define DMA2_8_X_COUNT 0xFFC00E10 /* DMA2 Channel 8 Inner Loop Count */
|
|
#define DMA2_8_Y_COUNT 0xFFC00E18 /* DMA2 Channel 8 Outer Loop Count */
|
|
#define DMA2_8_X_MODIFY 0xFFC00E14 /* DMA2 Channel 8 Inner Loop Addr Increment */
|
|
#define DMA2_8_Y_MODIFY 0xFFC00E1C /* DMA2 Channel 8 Outer Loop Addr Increment */
|
|
#define DMA2_8_CURR_DESC_PTR 0xFFC00E20 /* DMA2 Channel 8 Current Descriptor Pointer */
|
|
#define DMA2_8_CURR_ADDR 0xFFC00E24 /* DMA2 Channel 8 Current Address Pointer */
|
|
#define DMA2_8_CURR_X_COUNT 0xFFC00E30 /* DMA2 Channel 8 Current Inner Loop Count */
|
|
#define DMA2_8_CURR_Y_COUNT 0xFFC00E38 /* DMA2 Channel 8 Current Outer Loop Count */
|
|
#define DMA2_8_IRQ_STATUS 0xFFC00E28 /* DMA2 Channel 8 Interrupt/Status Register */
|
|
#define DMA2_8_PERIPHERAL_MAP 0xFFC00E2C /* DMA2 Channel 8 Peripheral Map Register */
|
|
|
|
#define DMA2_9_CONFIG 0xFFC00E48 /* DMA2 Channel 9 Configuration register */
|
|
#define DMA2_9_NEXT_DESC_PTR 0xFFC00E40 /* DMA2 Channel 9 Next Descripter Ptr Reg */
|
|
#define DMA2_9_START_ADDR 0xFFC00E44 /* DMA2 Channel 9 Start Address */
|
|
#define DMA2_9_X_COUNT 0xFFC00E50 /* DMA2 Channel 9 Inner Loop Count */
|
|
#define DMA2_9_Y_COUNT 0xFFC00E58 /* DMA2 Channel 9 Outer Loop Count */
|
|
#define DMA2_9_X_MODIFY 0xFFC00E54 /* DMA2 Channel 9 Inner Loop Addr Increment */
|
|
#define DMA2_9_Y_MODIFY 0xFFC00E5C /* DMA2 Channel 9 Outer Loop Addr Increment */
|
|
#define DMA2_9_CURR_DESC_PTR 0xFFC00E60 /* DMA2 Channel 9 Current Descriptor Pointer */
|
|
#define DMA2_9_CURR_ADDR 0xFFC00E64 /* DMA2 Channel 9 Current Address Pointer */
|
|
#define DMA2_9_CURR_X_COUNT 0xFFC00E70 /* DMA2 Channel 9 Current Inner Loop Count */
|
|
#define DMA2_9_CURR_Y_COUNT 0xFFC00E78 /* DMA2 Channel 9 Current Outer Loop Count */
|
|
#define DMA2_9_IRQ_STATUS 0xFFC00E68 /* DMA2 Channel 9 Interrupt/Status Register */
|
|
#define DMA2_9_PERIPHERAL_MAP 0xFFC00E6C /* DMA2 Channel 9 Peripheral Map Register */
|
|
|
|
#define DMA2_10_CONFIG 0xFFC00E88 /* DMA2 Channel 10 Configuration register */
|
|
#define DMA2_10_NEXT_DESC_PTR 0xFFC00E80 /* DMA2 Channel 10 Next Descripter Ptr Reg */
|
|
#define DMA2_10_START_ADDR 0xFFC00E84 /* DMA2 Channel 10 Start Address */
|
|
#define DMA2_10_X_COUNT 0xFFC00E90 /* DMA2 Channel 10 Inner Loop Count */
|
|
#define DMA2_10_Y_COUNT 0xFFC00E98 /* DMA2 Channel 10 Outer Loop Count */
|
|
#define DMA2_10_X_MODIFY 0xFFC00E94 /* DMA2 Channel 10 Inner Loop Addr Increment */
|
|
#define DMA2_10_Y_MODIFY 0xFFC00E9C /* DMA2 Channel 10 Outer Loop Addr Increment */
|
|
#define DMA2_10_CURR_DESC_PTR 0xFFC00EA0 /* DMA2 Channel 10 Current Descriptor Pointer */
|
|
#define DMA2_10_CURR_ADDR 0xFFC00EA4 /* DMA2 Channel 10 Current Address Pointer */
|
|
#define DMA2_10_CURR_X_COUNT 0xFFC00EB0 /* DMA2 Channel 10 Current Inner Loop Count */
|
|
#define DMA2_10_CURR_Y_COUNT 0xFFC00EB8 /* DMA2 Channel 10 Current Outer Loop Count */
|
|
#define DMA2_10_IRQ_STATUS 0xFFC00EA8 /* DMA2 Channel 10 Interrupt/Status Register */
|
|
#define DMA2_10_PERIPHERAL_MAP 0xFFC00EAC /* DMA2 Channel 10 Peripheral Map Register */
|
|
|
|
#define DMA2_11_CONFIG 0xFFC00EC8 /* DMA2 Channel 11 Configuration register */
|
|
#define DMA2_11_NEXT_DESC_PTR 0xFFC00EC0 /* DMA2 Channel 11 Next Descripter Ptr Reg */
|
|
#define DMA2_11_START_ADDR 0xFFC00EC4 /* DMA2 Channel 11 Start Address */
|
|
#define DMA2_11_X_COUNT 0xFFC00ED0 /* DMA2 Channel 11 Inner Loop Count */
|
|
#define DMA2_11_Y_COUNT 0xFFC00ED8 /* DMA2 Channel 11 Outer Loop Count */
|
|
#define DMA2_11_X_MODIFY 0xFFC00ED4 /* DMA2 Channel 11 Inner Loop Addr Increment */
|
|
#define DMA2_11_Y_MODIFY 0xFFC00EDC /* DMA2 Channel 11 Outer Loop Addr Increment */
|
|
#define DMA2_11_CURR_DESC_PTR 0xFFC00EE0 /* DMA2 Channel 11 Current Descriptor Pointer */
|
|
#define DMA2_11_CURR_ADDR 0xFFC00EE4 /* DMA2 Channel 11 Current Address Pointer */
|
|
#define DMA2_11_CURR_X_COUNT 0xFFC00EF0 /* DMA2 Channel 11 Current Inner Loop Count */
|
|
#define DMA2_11_CURR_Y_COUNT 0xFFC00EF8 /* DMA2 Channel 11 Current Outer Loop Count */
|
|
#define DMA2_11_IRQ_STATUS 0xFFC00EE8 /* DMA2 Channel 11 Interrupt/Status Register */
|
|
#define DMA2_11_PERIPHERAL_MAP 0xFFC00EEC /* DMA2 Channel 11 Peripheral Map Register */
|
|
|
|
/* Memory DMA2 Controller registers (0xFFC0 0E80-0xFFC0 0FFF) */
|
|
#define MDMA_D0_CONFIG 0xFFC00F08 /*MemDMA2 Stream 0 Destination Configuration register */
|
|
#define MDMA_D0_NEXT_DESC_PTR 0xFFC00F00 /*MemDMA2 Stream 0 Destination Next Descriptor Ptr Reg */
|
|
#define MDMA_D0_START_ADDR 0xFFC00F04 /*MemDMA2 Stream 0 Destination Start Address */
|
|
#define MDMA_D0_X_COUNT 0xFFC00F10 /*MemDMA2 Stream 0 Dest Inner-Loop Count register */
|
|
#define MDMA_D0_Y_COUNT 0xFFC00F18 /*MemDMA2 Stream 0 Dest Outer-Loop Count register */
|
|
#define MDMA_D0_X_MODIFY 0xFFC00F14 /*MemDMA2 Stream 0 Dest Inner-Loop Address-Increment */
|
|
#define MDMA_D0_Y_MODIFY 0xFFC00F1C /*MemDMA2 Stream 0 Dest Outer-Loop Address-Increment */
|
|
#define MDMA_D0_CURR_DESC_PTR 0xFFC00F20 /*MemDMA2 Stream 0 Dest Current Descriptor Ptr reg */
|
|
#define MDMA_D0_CURR_ADDR 0xFFC00F24 /*MemDMA2 Stream 0 Destination Current Address */
|
|
#define MDMA_D0_CURR_X_COUNT 0xFFC00F30 /*MemDMA2 Stream 0 Dest Current Inner-Loop Count reg */
|
|
#define MDMA_D0_CURR_Y_COUNT 0xFFC00F38 /*MemDMA2 Stream 0 Dest Current Outer-Loop Count reg */
|
|
#define MDMA_D0_IRQ_STATUS 0xFFC00F28 /*MemDMA2 Stream 0 Dest Interrupt/Status Register */
|
|
#define MDMA_D0_PERIPHERAL_MAP 0xFFC00F2C /*MemDMA2 Stream 0 Destination Peripheral Map register */
|
|
|
|
#define MDMA_S0_CONFIG 0xFFC00F48 /*MemDMA2 Stream 0 Source Configuration register */
|
|
#define MDMA_S0_NEXT_DESC_PTR 0xFFC00F40 /*MemDMA2 Stream 0 Source Next Descriptor Ptr Reg */
|
|
#define MDMA_S0_START_ADDR 0xFFC00F44 /*MemDMA2 Stream 0 Source Start Address */
|
|
#define MDMA_S0_X_COUNT 0xFFC00F50 /*MemDMA2 Stream 0 Source Inner-Loop Count register */
|
|
#define MDMA_S0_Y_COUNT 0xFFC00F58 /*MemDMA2 Stream 0 Source Outer-Loop Count register */
|
|
#define MDMA_S0_X_MODIFY 0xFFC00F54 /*MemDMA2 Stream 0 Src Inner-Loop Addr-Increment reg */
|
|
#define MDMA_S0_Y_MODIFY 0xFFC00F5C /*MemDMA2 Stream 0 Src Outer-Loop Addr-Increment reg */
|
|
#define MDMA_S0_CURR_DESC_PTR 0xFFC00F60 /*MemDMA2 Stream 0 Source Current Descriptor Ptr reg */
|
|
#define MDMA_S0_CURR_ADDR 0xFFC00F64 /*MemDMA2 Stream 0 Source Current Address */
|
|
#define MDMA_S0_CURR_X_COUNT 0xFFC00F70 /*MemDMA2 Stream 0 Src Current Inner-Loop Count reg */
|
|
#define MDMA_S0_CURR_Y_COUNT 0xFFC00F78 /*MemDMA2 Stream 0 Src Current Outer-Loop Count reg */
|
|
#define MDMA_S0_IRQ_STATUS 0xFFC00F68 /*MemDMA2 Stream 0 Source Interrupt/Status Register */
|
|
#define MDMA_S0_PERIPHERAL_MAP 0xFFC00F6C /*MemDMA2 Stream 0 Source Peripheral Map register */
|
|
|
|
#define MDMA_D1_CONFIG 0xFFC00F88 /*MemDMA2 Stream 1 Destination Configuration register */
|
|
#define MDMA_D1_NEXT_DESC_PTR 0xFFC00F80 /*MemDMA2 Stream 1 Destination Next Descriptor Ptr Reg */
|
|
#define MDMA_D1_START_ADDR 0xFFC00F84 /*MemDMA2 Stream 1 Destination Start Address */
|
|
#define MDMA_D1_X_COUNT 0xFFC00F90 /*MemDMA2 Stream 1 Dest Inner-Loop Count register */
|
|
#define MDMA_D1_Y_COUNT 0xFFC00F98 /*MemDMA2 Stream 1 Dest Outer-Loop Count register */
|
|
#define MDMA_D1_X_MODIFY 0xFFC00F94 /*MemDMA2 Stream 1 Dest Inner-Loop Address-Increment */
|
|
#define MDMA_D1_Y_MODIFY 0xFFC00F9C /*MemDMA2 Stream 1 Dest Outer-Loop Address-Increment */
|
|
#define MDMA_D1_CURR_DESC_PTR 0xFFC00FA0 /*MemDMA2 Stream 1 Destination Current Descriptor Ptr */
|
|
#define MDMA_D1_CURR_ADDR 0xFFC00FA4 /*MemDMA2 Stream 1 Destination Current Address reg */
|
|
#define MDMA_D1_CURR_X_COUNT 0xFFC00FB0 /*MemDMA2 Stream 1 Dest Current Inner-Loop Count reg */
|
|
#define MDMA_D1_CURR_Y_COUNT 0xFFC00FB8 /*MemDMA2 Stream 1 Dest Current Outer-Loop Count reg */
|
|
#define MDMA_D1_IRQ_STATUS 0xFFC00FA8 /*MemDMA2 Stream 1 Destination Interrupt/Status Reg */
|
|
#define MDMA_D1_PERIPHERAL_MAP 0xFFC00FAC /*MemDMA2 Stream 1 Destination Peripheral Map register */
|
|
|
|
#define MDMA_S1_CONFIG 0xFFC00FC8 /*MemDMA2 Stream 1 Source Configuration register */
|
|
#define MDMA_S1_NEXT_DESC_PTR 0xFFC00FC0 /*MemDMA2 Stream 1 Source Next Descriptor Ptr Reg */
|
|
#define MDMA_S1_START_ADDR 0xFFC00FC4 /*MemDMA2 Stream 1 Source Start Address */
|
|
#define MDMA_S1_X_COUNT 0xFFC00FD0 /*MemDMA2 Stream 1 Source Inner-Loop Count register */
|
|
#define MDMA_S1_Y_COUNT 0xFFC00FD8 /*MemDMA2 Stream 1 Source Outer-Loop Count register */
|
|
#define MDMA_S1_X_MODIFY 0xFFC00FD4 /*MemDMA2 Stream 1 Src Inner-Loop Address-Increment */
|
|
#define MDMA_S1_Y_MODIFY 0xFFC00FDC /*MemDMA2 Stream 1 Source Outer-Loop Address-Increment */
|
|
#define MDMA_S1_CURR_DESC_PTR 0xFFC00FE0 /*MemDMA2 Stream 1 Source Current Descriptor Ptr reg */
|
|
#define MDMA_S1_CURR_ADDR 0xFFC00FE4 /*MemDMA2 Stream 1 Source Current Address */
|
|
#define MDMA_S1_CURR_X_COUNT 0xFFC00FF0 /*MemDMA2 Stream 1 Source Current Inner-Loop Count */
|
|
#define MDMA_S1_CURR_Y_COUNT 0xFFC00FF8 /*MemDMA2 Stream 1 Source Current Outer-Loop Count */
|
|
#define MDMA_S1_IRQ_STATUS 0xFFC00FE8 /*MemDMA2 Stream 1 Source Interrupt/Status Register */
|
|
#define MDMA_S1_PERIPHERAL_MAP 0xFFC00FEC /*MemDMA2 Stream 1 Source Peripheral Map register */
|
|
|
|
/* Internal Memory DMA Registers (0xFFC0_1800 - 0xFFC0_19FF) */
|
|
#define IMDMA_D0_CONFIG 0xFFC01808 /*IMDMA Stream 0 Destination Configuration */
|
|
#define IMDMA_D0_NEXT_DESC_PTR 0xFFC01800 /*IMDMA Stream 0 Destination Next Descriptor Ptr Reg */
|
|
#define IMDMA_D0_START_ADDR 0xFFC01804 /*IMDMA Stream 0 Destination Start Address */
|
|
#define IMDMA_D0_X_COUNT 0xFFC01810 /*IMDMA Stream 0 Destination Inner-Loop Count */
|
|
#define IMDMA_D0_Y_COUNT 0xFFC01818 /*IMDMA Stream 0 Destination Outer-Loop Count */
|
|
#define IMDMA_D0_X_MODIFY 0xFFC01814 /*IMDMA Stream 0 Dest Inner-Loop Address-Increment */
|
|
#define IMDMA_D0_Y_MODIFY 0xFFC0181C /*IMDMA Stream 0 Dest Outer-Loop Address-Increment */
|
|
#define IMDMA_D0_CURR_DESC_PTR 0xFFC01820 /*IMDMA Stream 0 Destination Current Descriptor Ptr */
|
|
#define IMDMA_D0_CURR_ADDR 0xFFC01824 /*IMDMA Stream 0 Destination Current Address */
|
|
#define IMDMA_D0_CURR_X_COUNT 0xFFC01830 /*IMDMA Stream 0 Destination Current Inner-Loop Count */
|
|
#define IMDMA_D0_CURR_Y_COUNT 0xFFC01838 /*IMDMA Stream 0 Destination Current Outer-Loop Count */
|
|
#define IMDMA_D0_IRQ_STATUS 0xFFC01828 /*IMDMA Stream 0 Destination Interrupt/Status */
|
|
|
|
#define IMDMA_S0_CONFIG 0xFFC01848 /*IMDMA Stream 0 Source Configuration */
|
|
#define IMDMA_S0_NEXT_DESC_PTR 0xFFC01840 /*IMDMA Stream 0 Source Next Descriptor Ptr Reg */
|
|
#define IMDMA_S0_START_ADDR 0xFFC01844 /*IMDMA Stream 0 Source Start Address */
|
|
#define IMDMA_S0_X_COUNT 0xFFC01850 /*IMDMA Stream 0 Source Inner-Loop Count */
|
|
#define IMDMA_S0_Y_COUNT 0xFFC01858 /*IMDMA Stream 0 Source Outer-Loop Count */
|
|
#define IMDMA_S0_X_MODIFY 0xFFC01854 /*IMDMA Stream 0 Source Inner-Loop Address-Increment */
|
|
#define IMDMA_S0_Y_MODIFY 0xFFC0185C /*IMDMA Stream 0 Source Outer-Loop Address-Increment */
|
|
#define IMDMA_S0_CURR_DESC_PTR 0xFFC01860 /*IMDMA Stream 0 Source Current Descriptor Ptr reg */
|
|
#define IMDMA_S0_CURR_ADDR 0xFFC01864 /*IMDMA Stream 0 Source Current Address */
|
|
#define IMDMA_S0_CURR_X_COUNT 0xFFC01870 /*IMDMA Stream 0 Source Current Inner-Loop Count */
|
|
#define IMDMA_S0_CURR_Y_COUNT 0xFFC01878 /*IMDMA Stream 0 Source Current Outer-Loop Count */
|
|
#define IMDMA_S0_IRQ_STATUS 0xFFC01868 /*IMDMA Stream 0 Source Interrupt/Status */
|
|
|
|
#define IMDMA_D1_CONFIG 0xFFC01888 /*IMDMA Stream 1 Destination Configuration */
|
|
#define IMDMA_D1_NEXT_DESC_PTR 0xFFC01880 /*IMDMA Stream 1 Destination Next Descriptor Ptr Reg */
|
|
#define IMDMA_D1_START_ADDR 0xFFC01884 /*IMDMA Stream 1 Destination Start Address */
|
|
#define IMDMA_D1_X_COUNT 0xFFC01890 /*IMDMA Stream 1 Destination Inner-Loop Count */
|
|
#define IMDMA_D1_Y_COUNT 0xFFC01898 /*IMDMA Stream 1 Destination Outer-Loop Count */
|
|
#define IMDMA_D1_X_MODIFY 0xFFC01894 /*IMDMA Stream 1 Dest Inner-Loop Address-Increment */
|
|
#define IMDMA_D1_Y_MODIFY 0xFFC0189C /*IMDMA Stream 1 Dest Outer-Loop Address-Increment */
|
|
#define IMDMA_D1_CURR_DESC_PTR 0xFFC018A0 /*IMDMA Stream 1 Destination Current Descriptor Ptr */
|
|
#define IMDMA_D1_CURR_ADDR 0xFFC018A4 /*IMDMA Stream 1 Destination Current Address */
|
|
#define IMDMA_D1_CURR_X_COUNT 0xFFC018B0 /*IMDMA Stream 1 Destination Current Inner-Loop Count */
|
|
#define IMDMA_D1_CURR_Y_COUNT 0xFFC018B8 /*IMDMA Stream 1 Destination Current Outer-Loop Count */
|
|
#define IMDMA_D1_IRQ_STATUS 0xFFC018A8 /*IMDMA Stream 1 Destination Interrupt/Status */
|
|
|
|
#define IMDMA_S1_CONFIG 0xFFC018C8 /*IMDMA Stream 1 Source Configuration */
|
|
#define IMDMA_S1_NEXT_DESC_PTR 0xFFC018C0 /*IMDMA Stream 1 Source Next Descriptor Ptr Reg */
|
|
#define IMDMA_S1_START_ADDR 0xFFC018C4 /*IMDMA Stream 1 Source Start Address */
|
|
#define IMDMA_S1_X_COUNT 0xFFC018D0 /*IMDMA Stream 1 Source Inner-Loop Count */
|
|
#define IMDMA_S1_Y_COUNT 0xFFC018D8 /*IMDMA Stream 1 Source Outer-Loop Count */
|
|
#define IMDMA_S1_X_MODIFY 0xFFC018D4 /*IMDMA Stream 1 Source Inner-Loop Address-Increment */
|
|
#define IMDMA_S1_Y_MODIFY 0xFFC018DC /*IMDMA Stream 1 Source Outer-Loop Address-Increment */
|
|
#define IMDMA_S1_CURR_DESC_PTR 0xFFC018E0 /*IMDMA Stream 1 Source Current Descriptor Ptr reg */
|
|
#define IMDMA_S1_CURR_ADDR 0xFFC018E4 /*IMDMA Stream 1 Source Current Address */
|
|
#define IMDMA_S1_CURR_X_COUNT 0xFFC018F0 /*IMDMA Stream 1 Source Current Inner-Loop Count */
|
|
#define IMDMA_S1_CURR_Y_COUNT 0xFFC018F8 /*IMDMA Stream 1 Source Current Outer-Loop Count */
|
|
#define IMDMA_S1_IRQ_STATUS 0xFFC018E8 /*IMDMA Stream 1 Source Interrupt/Status */
|
|
|
|
/*********************************************************************************** */
|
|
/* System MMR Register Bits */
|
|
/******************************************************************************* */
|
|
|
|
/* CHIPID Masks */
|
|
#define CHIPID_VERSION 0xF0000000
|
|
#define CHIPID_FAMILY 0x0FFFF000
|
|
#define CHIPID_MANUFACTURE 0x00000FFE
|
|
|
|
/* SICA_SYSCR Masks */
|
|
#define COREB_SRAM_INIT 0x0020
|
|
|
|
/* SWRST Mask */
|
|
#define SYSTEM_RESET 0x0007 /* Initiates a system software reset */
|
|
#define DOUBLE_FAULT_A 0x0008 /* Core A Double Fault Causes Reset */
|
|
#define DOUBLE_FAULT_B 0x0010 /* Core B Double Fault Causes Reset */
|
|
#define SWRST_DBL_FAULT_A 0x0800 /* SWRST Core A Double Fault */
|
|
#define SWRST_DBL_FAULT_B 0x1000 /* SWRST Core B Double Fault */
|
|
#define SWRST_WDT_B 0x2000 /* SWRST Watchdog B */
|
|
#define SWRST_WDT_A 0x4000 /* SWRST Watchdog A */
|
|
#define SWRST_OCCURRED 0x8000 /* SWRST Status */
|
|
|
|
/* ************* SYSTEM INTERRUPT CONTROLLER MASKS ***************** */
|
|
|
|
/* SICu_IARv Masks */
|
|
/* u = A or B */
|
|
/* v = 0 to 7 */
|
|
/* w = 0 or 1 */
|
|
|
|
/* Per_number = 0 to 63 */
|
|
/* IVG_number = 7 to 15 */
|
|
#define Peripheral_IVG(Per_number, IVG_number) \
|
|
((IVG_number) - 7) << (((Per_number) % 8) * 4) /* Peripheral #Per_number assigned IVG #IVG_number */
|
|
/* Usage: r0.l = lo(Peripheral_IVG(62, 10)); */
|
|
/* r0.h = hi(Peripheral_IVG(62, 10)); */
|
|
|
|
/* SICx_IMASKw Masks */
|
|
/* masks are 32 bit wide, so two writes reguired for "64 bit" wide registers */
|
|
#define SIC_UNMASK_ALL 0x00000000 /* Unmask all peripheral interrupts */
|
|
#define SIC_MASK_ALL 0xFFFFFFFF /* Mask all peripheral interrupts */
|
|
#define SIC_MASK(x) (1 << (x)) /* Mask Peripheral #x interrupt */
|
|
#define SIC_UNMASK(x) (0xFFFFFFFF ^ (1 << (x))) /* Unmask Peripheral #x interrupt */
|
|
|
|
/* SIC_IWR Masks */
|
|
#define IWR_DISABLE_ALL 0x00000000 /* Wakeup Disable all peripherals */
|
|
#define IWR_ENABLE_ALL 0xFFFFFFFF /* Wakeup Enable all peripherals */
|
|
/* x = pos 0 to 31, for 32-63 use value-32 */
|
|
#define IWR_ENABLE(x) (1 << (x)) /* Wakeup Enable Peripheral #x */
|
|
#define IWR_DISABLE(x) (0xFFFFFFFF ^ (1 << (x))) /* Wakeup Disable Peripheral #x */
|
|
|
|
/* ********* PARALLEL PERIPHERAL INTERFACE (PPI) MASKS **************** */
|
|
|
|
/* PPI_CONTROL Masks */
|
|
#define PORT_EN 0x00000001 /* PPI Port Enable */
|
|
#define PORT_DIR 0x00000002 /* PPI Port Direction */
|
|
#define XFR_TYPE 0x0000000C /* PPI Transfer Type */
|
|
#define PORT_CFG 0x00000030 /* PPI Port Configuration */
|
|
#define FLD_SEL 0x00000040 /* PPI Active Field Select */
|
|
#define PACK_EN 0x00000080 /* PPI Packing Mode */
|
|
#define DMA32 0x00000100 /* PPI 32-bit DMA Enable */
|
|
#define SKIP_EN 0x00000200 /* PPI Skip Element Enable */
|
|
#define SKIP_EO 0x00000400 /* PPI Skip Even/Odd Elements */
|
|
#define DLENGTH 0x00003800 /* PPI Data Length */
|
|
#define DLEN_8 0x0 /* PPI Data Length mask for DLEN=8 */
|
|
#define DLEN(x) (((x-9) & 0x07) << 11) /* PPI Data Length (only works for x=10-->x=16) */
|
|
#define POL 0x0000C000 /* PPI Signal Polarities */
|
|
#define POLC 0x4000 /* PPI Clock Polarity */
|
|
#define POLS 0x8000 /* PPI Frame Sync Polarity */
|
|
|
|
/* PPI_STATUS Masks */
|
|
#define FLD 0x00000400 /* Field Indicator */
|
|
#define FT_ERR 0x00000800 /* Frame Track Error */
|
|
#define OVR 0x00001000 /* FIFO Overflow Error */
|
|
#define UNDR 0x00002000 /* FIFO Underrun Error */
|
|
#define ERR_DET 0x00004000 /* Error Detected Indicator */
|
|
#define ERR_NCOR 0x00008000 /* Error Not Corrected Indicator */
|
|
|
|
/* ********** DMA CONTROLLER MASKS *********************8 */
|
|
|
|
/* DMAx_PERIPHERAL_MAP, MDMA_yy_PERIPHERAL_MAP, IMDMA_yy_PERIPHERAL_MAP Masks */
|
|
|
|
#define CTYPE 0x00000040 /* DMA Channel Type Indicator */
|
|
#define CTYPE_P 6 /* DMA Channel Type Indicator BIT POSITION */
|
|
#define PCAP8 0x00000080 /* DMA 8-bit Operation Indicator */
|
|
#define PCAP16 0x00000100 /* DMA 16-bit Operation Indicator */
|
|
#define PCAP32 0x00000200 /* DMA 32-bit Operation Indicator */
|
|
#define PCAPWR 0x00000400 /* DMA Write Operation Indicator */
|
|
#define PCAPRD 0x00000800 /* DMA Read Operation Indicator */
|
|
#define PMAP 0x00007000 /* DMA Peripheral Map Field */
|
|
|
|
/* ************* GENERAL PURPOSE TIMER MASKS ******************** */
|
|
|
|
/* PWM Timer bit definitions */
|
|
|
|
/* TIMER_ENABLE Register */
|
|
#define TIMEN0 0x0001
|
|
#define TIMEN1 0x0002
|
|
#define TIMEN2 0x0004
|
|
#define TIMEN3 0x0008
|
|
#define TIMEN4 0x0010
|
|
#define TIMEN5 0x0020
|
|
#define TIMEN6 0x0040
|
|
#define TIMEN7 0x0080
|
|
#define TIMEN8 0x0001
|
|
#define TIMEN9 0x0002
|
|
#define TIMEN10 0x0004
|
|
#define TIMEN11 0x0008
|
|
|
|
#define TIMEN0_P 0x00
|
|
#define TIMEN1_P 0x01
|
|
#define TIMEN2_P 0x02
|
|
#define TIMEN3_P 0x03
|
|
#define TIMEN4_P 0x04
|
|
#define TIMEN5_P 0x05
|
|
#define TIMEN6_P 0x06
|
|
#define TIMEN7_P 0x07
|
|
#define TIMEN8_P 0x00
|
|
#define TIMEN9_P 0x01
|
|
#define TIMEN10_P 0x02
|
|
#define TIMEN11_P 0x03
|
|
|
|
/* TIMER_DISABLE Register */
|
|
#define TIMDIS0 0x0001
|
|
#define TIMDIS1 0x0002
|
|
#define TIMDIS2 0x0004
|
|
#define TIMDIS3 0x0008
|
|
#define TIMDIS4 0x0010
|
|
#define TIMDIS5 0x0020
|
|
#define TIMDIS6 0x0040
|
|
#define TIMDIS7 0x0080
|
|
#define TIMDIS8 0x0001
|
|
#define TIMDIS9 0x0002
|
|
#define TIMDIS10 0x0004
|
|
#define TIMDIS11 0x0008
|
|
|
|
#define TIMDIS0_P 0x00
|
|
#define TIMDIS1_P 0x01
|
|
#define TIMDIS2_P 0x02
|
|
#define TIMDIS3_P 0x03
|
|
#define TIMDIS4_P 0x04
|
|
#define TIMDIS5_P 0x05
|
|
#define TIMDIS6_P 0x06
|
|
#define TIMDIS7_P 0x07
|
|
#define TIMDIS8_P 0x00
|
|
#define TIMDIS9_P 0x01
|
|
#define TIMDIS10_P 0x02
|
|
#define TIMDIS11_P 0x03
|
|
|
|
/* TIMER_STATUS Register */
|
|
#define TIMIL0 0x00000001
|
|
#define TIMIL1 0x00000002
|
|
#define TIMIL2 0x00000004
|
|
#define TIMIL3 0x00000008
|
|
#define TIMIL4 0x00010000
|
|
#define TIMIL5 0x00020000
|
|
#define TIMIL6 0x00040000
|
|
#define TIMIL7 0x00080000
|
|
#define TIMIL8 0x0001
|
|
#define TIMIL9 0x0002
|
|
#define TIMIL10 0x0004
|
|
#define TIMIL11 0x0008
|
|
#define TOVF_ERR0 0x00000010
|
|
#define TOVF_ERR1 0x00000020
|
|
#define TOVF_ERR2 0x00000040
|
|
#define TOVF_ERR3 0x00000080
|
|
#define TOVF_ERR4 0x00100000
|
|
#define TOVF_ERR5 0x00200000
|
|
#define TOVF_ERR6 0x00400000
|
|
#define TOVF_ERR7 0x00800000
|
|
#define TOVF_ERR8 0x0010
|
|
#define TOVF_ERR9 0x0020
|
|
#define TOVF_ERR10 0x0040
|
|
#define TOVF_ERR11 0x0080
|
|
#define TRUN0 0x00001000
|
|
#define TRUN1 0x00002000
|
|
#define TRUN2 0x00004000
|
|
#define TRUN3 0x00008000
|
|
#define TRUN4 0x10000000
|
|
#define TRUN5 0x20000000
|
|
#define TRUN6 0x40000000
|
|
#define TRUN7 0x80000000
|
|
#define TRUN8 0x1000
|
|
#define TRUN9 0x2000
|
|
#define TRUN10 0x4000
|
|
#define TRUN11 0x8000
|
|
|
|
#define TIMIL0_P 0x00
|
|
#define TIMIL1_P 0x01
|
|
#define TIMIL2_P 0x02
|
|
#define TIMIL3_P 0x03
|
|
#define TIMIL4_P 0x10
|
|
#define TIMIL5_P 0x11
|
|
#define TIMIL6_P 0x12
|
|
#define TIMIL7_P 0x13
|
|
#define TIMIL8_P 0x00
|
|
#define TIMIL9_P 0x01
|
|
#define TIMIL10_P 0x02
|
|
#define TIMIL11_P 0x03
|
|
#define TOVF_ERR0_P 0x04
|
|
#define TOVF_ERR1_P 0x05
|
|
#define TOVF_ERR2_P 0x06
|
|
#define TOVF_ERR3_P 0x07
|
|
#define TOVF_ERR4_P 0x14
|
|
#define TOVF_ERR5_P 0x15
|
|
#define TOVF_ERR6_P 0x16
|
|
#define TOVF_ERR7_P 0x17
|
|
#define TOVF_ERR8_P 0x04
|
|
#define TOVF_ERR9_P 0x05
|
|
#define TOVF_ERR10_P 0x06
|
|
#define TOVF_ERR11_P 0x07
|
|
#define TRUN0_P 0x0C
|
|
#define TRUN1_P 0x0D
|
|
#define TRUN2_P 0x0E
|
|
#define TRUN3_P 0x0F
|
|
#define TRUN4_P 0x1C
|
|
#define TRUN5_P 0x1D
|
|
#define TRUN6_P 0x1E
|
|
#define TRUN7_P 0x1F
|
|
#define TRUN8_P 0x0C
|
|
#define TRUN9_P 0x0D
|
|
#define TRUN10_P 0x0E
|
|
#define TRUN11_P 0x0F
|
|
|
|
/* Alternate Deprecated Macros Provided For Backwards Code Compatibility */
|
|
#define TOVL_ERR0 TOVF_ERR0
|
|
#define TOVL_ERR1 TOVF_ERR1
|
|
#define TOVL_ERR2 TOVF_ERR2
|
|
#define TOVL_ERR3 TOVF_ERR3
|
|
#define TOVL_ERR4 TOVF_ERR4
|
|
#define TOVL_ERR5 TOVF_ERR5
|
|
#define TOVL_ERR6 TOVF_ERR6
|
|
#define TOVL_ERR7 TOVF_ERR7
|
|
#define TOVL_ERR8 TOVF_ERR8
|
|
#define TOVL_ERR9 TOVF_ERR9
|
|
#define TOVL_ERR10 TOVF_ERR10
|
|
#define TOVL_ERR11 TOVF_ERR11
|
|
#define TOVL_ERR0_P TOVF_ERR0_P
|
|
#define TOVL_ERR1_P TOVF_ERR1_P
|
|
#define TOVL_ERR2_P TOVF_ERR2_P
|
|
#define TOVL_ERR3_P TOVF_ERR3_P
|
|
#define TOVL_ERR4_P TOVF_ERR4_P
|
|
#define TOVL_ERR5_P TOVF_ERR5_P
|
|
#define TOVL_ERR6_P TOVF_ERR6_P
|
|
#define TOVL_ERR7_P TOVF_ERR7_P
|
|
#define TOVL_ERR8_P TOVF_ERR8_P
|
|
#define TOVL_ERR9_P TOVF_ERR9_P
|
|
#define TOVL_ERR10_P TOVF_ERR10_P
|
|
#define TOVL_ERR11_P TOVF_ERR11_P
|
|
|
|
/* TIMERx_CONFIG Registers */
|
|
#define PWM_OUT 0x0001
|
|
#define WDTH_CAP 0x0002
|
|
#define EXT_CLK 0x0003
|
|
#define PULSE_HI 0x0004
|
|
#define PERIOD_CNT 0x0008
|
|
#define IRQ_ENA 0x0010
|
|
#define TIN_SEL 0x0020
|
|
#define OUT_DIS 0x0040
|
|
#define CLK_SEL 0x0080
|
|
#define TOGGLE_HI 0x0100
|
|
#define EMU_RUN 0x0200
|
|
#define ERR_TYP(x) ((x & 0x03) << 14)
|
|
|
|
#define TMODE_P0 0x00
|
|
#define TMODE_P1 0x01
|
|
#define PULSE_HI_P 0x02
|
|
#define PERIOD_CNT_P 0x03
|
|
#define IRQ_ENA_P 0x04
|
|
#define TIN_SEL_P 0x05
|
|
#define OUT_DIS_P 0x06
|
|
#define CLK_SEL_P 0x07
|
|
#define TOGGLE_HI_P 0x08
|
|
#define EMU_RUN_P 0x09
|
|
#define ERR_TYP_P0 0x0E
|
|
#define ERR_TYP_P1 0x0F
|
|
|
|
/* ********************* ASYNCHRONOUS MEMORY CONTROLLER MASKS ************* */
|
|
|
|
/* AMGCTL Masks */
|
|
#define AMCKEN 0x0001 /* Enable CLKOUT */
|
|
#define AMBEN_B0 0x0002 /* Enable Asynchronous Memory Bank 0 only */
|
|
#define AMBEN_B0_B1 0x0004 /* Enable Asynchronous Memory Banks 0 & 1 only */
|
|
#define AMBEN_B0_B1_B2 0x0006 /* Enable Asynchronous Memory Banks 0, 1, and 2 */
|
|
#define AMBEN_ALL 0x0008 /* Enable Asynchronous Memory Banks (all) 0, 1, 2, and 3 */
|
|
#define B0_PEN 0x0010 /* Enable 16-bit packing Bank 0 */
|
|
#define B1_PEN 0x0020 /* Enable 16-bit packing Bank 1 */
|
|
#define B2_PEN 0x0040 /* Enable 16-bit packing Bank 2 */
|
|
#define B3_PEN 0x0080 /* Enable 16-bit packing Bank 3 */
|
|
|
|
/* AMGCTL Bit Positions */
|
|
#define AMCKEN_P 0x00000000 /* Enable CLKOUT */
|
|
#define AMBEN_P0 0x00000001 /* Asynchronous Memory Enable, 000 - banks 0-3 disabled, 001 - Bank 0 enabled */
|
|
#define AMBEN_P1 0x00000002 /* Asynchronous Memory Enable, 010 - banks 0&1 enabled, 011 - banks 0-3 enabled */
|
|
#define AMBEN_P2 0x00000003 /* Asynchronous Memory Enable, 1xx - All banks (bank 0, 1, 2, and 3) enabled */
|
|
#define B0_PEN_P 0x004 /* Enable 16-bit packing Bank 0 */
|
|
#define B1_PEN_P 0x005 /* Enable 16-bit packing Bank 1 */
|
|
#define B2_PEN_P 0x006 /* Enable 16-bit packing Bank 2 */
|
|
#define B3_PEN_P 0x007 /* Enable 16-bit packing Bank 3 */
|
|
|
|
/* AMBCTL0 Masks */
|
|
#define B0RDYEN 0x00000001 /* Bank 0 RDY Enable, 0=disable, 1=enable */
|
|
#define B0RDYPOL 0x00000002 /* Bank 0 RDY Active high, 0=active low, 1=active high */
|
|
#define B0TT_1 0x00000004 /* Bank 0 Transition Time from Read to Write = 1 cycle */
|
|
#define B0TT_2 0x00000008 /* Bank 0 Transition Time from Read to Write = 2 cycles */
|
|
#define B0TT_3 0x0000000C /* Bank 0 Transition Time from Read to Write = 3 cycles */
|
|
#define B0TT_4 0x00000000 /* Bank 0 Transition Time from Read to Write = 4 cycles */
|
|
#define B0ST_1 0x00000010 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=1 cycle */
|
|
#define B0ST_2 0x00000020 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=2 cycles */
|
|
#define B0ST_3 0x00000030 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=3 cycles */
|
|
#define B0ST_4 0x00000000 /* Bank 0 Setup Time from AOE asserted to Read/Write asserted=4 cycles */
|
|
#define B0HT_1 0x00000040 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 1 cycle */
|
|
#define B0HT_2 0x00000080 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 2 cycles */
|
|
#define B0HT_3 0x000000C0 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 3 cycles */
|
|
#define B0HT_0 0x00000000 /* Bank 0 Hold Time from Read/Write deasserted to AOE deasserted = 0 cycles */
|
|
#define B0RAT_1 0x00000100 /* Bank 0 Read Access Time = 1 cycle */
|
|
#define B0RAT_2 0x00000200 /* Bank 0 Read Access Time = 2 cycles */
|
|
#define B0RAT_3 0x00000300 /* Bank 0 Read Access Time = 3 cycles */
|
|
#define B0RAT_4 0x00000400 /* Bank 0 Read Access Time = 4 cycles */
|
|
#define B0RAT_5 0x00000500 /* Bank 0 Read Access Time = 5 cycles */
|
|
#define B0RAT_6 0x00000600 /* Bank 0 Read Access Time = 6 cycles */
|
|
#define B0RAT_7 0x00000700 /* Bank 0 Read Access Time = 7 cycles */
|
|
#define B0RAT_8 0x00000800 /* Bank 0 Read Access Time = 8 cycles */
|
|
#define B0RAT_9 0x00000900 /* Bank 0 Read Access Time = 9 cycles */
|
|
#define B0RAT_10 0x00000A00 /* Bank 0 Read Access Time = 10 cycles */
|
|
#define B0RAT_11 0x00000B00 /* Bank 0 Read Access Time = 11 cycles */
|
|
#define B0RAT_12 0x00000C00 /* Bank 0 Read Access Time = 12 cycles */
|
|
#define B0RAT_13 0x00000D00 /* Bank 0 Read Access Time = 13 cycles */
|
|
#define B0RAT_14 0x00000E00 /* Bank 0 Read Access Time = 14 cycles */
|
|
#define B0RAT_15 0x00000F00 /* Bank 0 Read Access Time = 15 cycles */
|
|
#define B0WAT_1 0x00001000 /* Bank 0 Write Access Time = 1 cycle */
|
|
#define B0WAT_2 0x00002000 /* Bank 0 Write Access Time = 2 cycles */
|
|
#define B0WAT_3 0x00003000 /* Bank 0 Write Access Time = 3 cycles */
|
|
#define B0WAT_4 0x00004000 /* Bank 0 Write Access Time = 4 cycles */
|
|
#define B0WAT_5 0x00005000 /* Bank 0 Write Access Time = 5 cycles */
|
|
#define B0WAT_6 0x00006000 /* Bank 0 Write Access Time = 6 cycles */
|
|
#define B0WAT_7 0x00007000 /* Bank 0 Write Access Time = 7 cycles */
|
|
#define B0WAT_8 0x00008000 /* Bank 0 Write Access Time = 8 cycles */
|
|
#define B0WAT_9 0x00009000 /* Bank 0 Write Access Time = 9 cycles */
|
|
#define B0WAT_10 0x0000A000 /* Bank 0 Write Access Time = 10 cycles */
|
|
#define B0WAT_11 0x0000B000 /* Bank 0 Write Access Time = 11 cycles */
|
|
#define B0WAT_12 0x0000C000 /* Bank 0 Write Access Time = 12 cycles */
|
|
#define B0WAT_13 0x0000D000 /* Bank 0 Write Access Time = 13 cycles */
|
|
#define B0WAT_14 0x0000E000 /* Bank 0 Write Access Time = 14 cycles */
|
|
#define B0WAT_15 0x0000F000 /* Bank 0 Write Access Time = 15 cycles */
|
|
#define B1RDYEN 0x00010000 /* Bank 1 RDY enable, 0=disable, 1=enable */
|
|
#define B1RDYPOL 0x00020000 /* Bank 1 RDY Active high, 0=active low, 1=active high */
|
|
#define B1TT_1 0x00040000 /* Bank 1 Transition Time from Read to Write = 1 cycle */
|
|
#define B1TT_2 0x00080000 /* Bank 1 Transition Time from Read to Write = 2 cycles */
|
|
#define B1TT_3 0x000C0000 /* Bank 1 Transition Time from Read to Write = 3 cycles */
|
|
#define B1TT_4 0x00000000 /* Bank 1 Transition Time from Read to Write = 4 cycles */
|
|
#define B1ST_1 0x00100000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
|
|
#define B1ST_2 0x00200000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
|
|
#define B1ST_3 0x00300000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
|
|
#define B1ST_4 0x00000000 /* Bank 1 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
|
|
#define B1HT_1 0x00400000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
|
|
#define B1HT_2 0x00800000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
|
|
#define B1HT_3 0x00C00000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
|
|
#define B1HT_0 0x00000000 /* Bank 1 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
|
|
#define B1RAT_1 0x01000000 /* Bank 1 Read Access Time = 1 cycle */
|
|
#define B1RAT_2 0x02000000 /* Bank 1 Read Access Time = 2 cycles */
|
|
#define B1RAT_3 0x03000000 /* Bank 1 Read Access Time = 3 cycles */
|
|
#define B1RAT_4 0x04000000 /* Bank 1 Read Access Time = 4 cycles */
|
|
#define B1RAT_5 0x05000000 /* Bank 1 Read Access Time = 5 cycles */
|
|
#define B1RAT_6 0x06000000 /* Bank 1 Read Access Time = 6 cycles */
|
|
#define B1RAT_7 0x07000000 /* Bank 1 Read Access Time = 7 cycles */
|
|
#define B1RAT_8 0x08000000 /* Bank 1 Read Access Time = 8 cycles */
|
|
#define B1RAT_9 0x09000000 /* Bank 1 Read Access Time = 9 cycles */
|
|
#define B1RAT_10 0x0A000000 /* Bank 1 Read Access Time = 10 cycles */
|
|
#define B1RAT_11 0x0B000000 /* Bank 1 Read Access Time = 11 cycles */
|
|
#define B1RAT_12 0x0C000000 /* Bank 1 Read Access Time = 12 cycles */
|
|
#define B1RAT_13 0x0D000000 /* Bank 1 Read Access Time = 13 cycles */
|
|
#define B1RAT_14 0x0E000000 /* Bank 1 Read Access Time = 14 cycles */
|
|
#define B1RAT_15 0x0F000000 /* Bank 1 Read Access Time = 15 cycles */
|
|
#define B1WAT_1 0x10000000 /* Bank 1 Write Access Time = 1 cycle */
|
|
#define B1WAT_2 0x20000000 /* Bank 1 Write Access Time = 2 cycles */
|
|
#define B1WAT_3 0x30000000 /* Bank 1 Write Access Time = 3 cycles */
|
|
#define B1WAT_4 0x40000000 /* Bank 1 Write Access Time = 4 cycles */
|
|
#define B1WAT_5 0x50000000 /* Bank 1 Write Access Time = 5 cycles */
|
|
#define B1WAT_6 0x60000000 /* Bank 1 Write Access Time = 6 cycles */
|
|
#define B1WAT_7 0x70000000 /* Bank 1 Write Access Time = 7 cycles */
|
|
#define B1WAT_8 0x80000000 /* Bank 1 Write Access Time = 8 cycles */
|
|
#define B1WAT_9 0x90000000 /* Bank 1 Write Access Time = 9 cycles */
|
|
#define B1WAT_10 0xA0000000 /* Bank 1 Write Access Time = 10 cycles */
|
|
#define B1WAT_11 0xB0000000 /* Bank 1 Write Access Time = 11 cycles */
|
|
#define B1WAT_12 0xC0000000 /* Bank 1 Write Access Time = 12 cycles */
|
|
#define B1WAT_13 0xD0000000 /* Bank 1 Write Access Time = 13 cycles */
|
|
#define B1WAT_14 0xE0000000 /* Bank 1 Write Access Time = 14 cycles */
|
|
#define B1WAT_15 0xF0000000 /* Bank 1 Write Access Time = 15 cycles */
|
|
|
|
/* AMBCTL1 Masks */
|
|
#define B2RDYEN 0x00000001 /* Bank 2 RDY Enable, 0=disable, 1=enable */
|
|
#define B2RDYPOL 0x00000002 /* Bank 2 RDY Active high, 0=active low, 1=active high */
|
|
#define B2TT_1 0x00000004 /* Bank 2 Transition Time from Read to Write = 1 cycle */
|
|
#define B2TT_2 0x00000008 /* Bank 2 Transition Time from Read to Write = 2 cycles */
|
|
#define B2TT_3 0x0000000C /* Bank 2 Transition Time from Read to Write = 3 cycles */
|
|
#define B2TT_4 0x00000000 /* Bank 2 Transition Time from Read to Write = 4 cycles */
|
|
#define B2ST_1 0x00000010 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
|
|
#define B2ST_2 0x00000020 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
|
|
#define B2ST_3 0x00000030 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
|
|
#define B2ST_4 0x00000000 /* Bank 2 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
|
|
#define B2HT_1 0x00000040 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
|
|
#define B2HT_2 0x00000080 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
|
|
#define B2HT_3 0x000000C0 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
|
|
#define B2HT_0 0x00000000 /* Bank 2 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
|
|
#define B2RAT_1 0x00000100 /* Bank 2 Read Access Time = 1 cycle */
|
|
#define B2RAT_2 0x00000200 /* Bank 2 Read Access Time = 2 cycles */
|
|
#define B2RAT_3 0x00000300 /* Bank 2 Read Access Time = 3 cycles */
|
|
#define B2RAT_4 0x00000400 /* Bank 2 Read Access Time = 4 cycles */
|
|
#define B2RAT_5 0x00000500 /* Bank 2 Read Access Time = 5 cycles */
|
|
#define B2RAT_6 0x00000600 /* Bank 2 Read Access Time = 6 cycles */
|
|
#define B2RAT_7 0x00000700 /* Bank 2 Read Access Time = 7 cycles */
|
|
#define B2RAT_8 0x00000800 /* Bank 2 Read Access Time = 8 cycles */
|
|
#define B2RAT_9 0x00000900 /* Bank 2 Read Access Time = 9 cycles */
|
|
#define B2RAT_10 0x00000A00 /* Bank 2 Read Access Time = 10 cycles */
|
|
#define B2RAT_11 0x00000B00 /* Bank 2 Read Access Time = 11 cycles */
|
|
#define B2RAT_12 0x00000C00 /* Bank 2 Read Access Time = 12 cycles */
|
|
#define B2RAT_13 0x00000D00 /* Bank 2 Read Access Time = 13 cycles */
|
|
#define B2RAT_14 0x00000E00 /* Bank 2 Read Access Time = 14 cycles */
|
|
#define B2RAT_15 0x00000F00 /* Bank 2 Read Access Time = 15 cycles */
|
|
#define B2WAT_1 0x00001000 /* Bank 2 Write Access Time = 1 cycle */
|
|
#define B2WAT_2 0x00002000 /* Bank 2 Write Access Time = 2 cycles */
|
|
#define B2WAT_3 0x00003000 /* Bank 2 Write Access Time = 3 cycles */
|
|
#define B2WAT_4 0x00004000 /* Bank 2 Write Access Time = 4 cycles */
|
|
#define B2WAT_5 0x00005000 /* Bank 2 Write Access Time = 5 cycles */
|
|
#define B2WAT_6 0x00006000 /* Bank 2 Write Access Time = 6 cycles */
|
|
#define B2WAT_7 0x00007000 /* Bank 2 Write Access Time = 7 cycles */
|
|
#define B2WAT_8 0x00008000 /* Bank 2 Write Access Time = 8 cycles */
|
|
#define B2WAT_9 0x00009000 /* Bank 2 Write Access Time = 9 cycles */
|
|
#define B2WAT_10 0x0000A000 /* Bank 2 Write Access Time = 10 cycles */
|
|
#define B2WAT_11 0x0000B000 /* Bank 2 Write Access Time = 11 cycles */
|
|
#define B2WAT_12 0x0000C000 /* Bank 2 Write Access Time = 12 cycles */
|
|
#define B2WAT_13 0x0000D000 /* Bank 2 Write Access Time = 13 cycles */
|
|
#define B2WAT_14 0x0000E000 /* Bank 2 Write Access Time = 14 cycles */
|
|
#define B2WAT_15 0x0000F000 /* Bank 2 Write Access Time = 15 cycles */
|
|
#define B3RDYEN 0x00010000 /* Bank 3 RDY enable, 0=disable, 1=enable */
|
|
#define B3RDYPOL 0x00020000 /* Bank 3 RDY Active high, 0=active low, 1=active high */
|
|
#define B3TT_1 0x00040000 /* Bank 3 Transition Time from Read to Write = 1 cycle */
|
|
#define B3TT_2 0x00080000 /* Bank 3 Transition Time from Read to Write = 2 cycles */
|
|
#define B3TT_3 0x000C0000 /* Bank 3 Transition Time from Read to Write = 3 cycles */
|
|
#define B3TT_4 0x00000000 /* Bank 3 Transition Time from Read to Write = 4 cycles */
|
|
#define B3ST_1 0x00100000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 1 cycle */
|
|
#define B3ST_2 0x00200000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 2 cycles */
|
|
#define B3ST_3 0x00300000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 3 cycles */
|
|
#define B3ST_4 0x00000000 /* Bank 3 Setup Time from AOE asserted to Read or Write asserted = 4 cycles */
|
|
#define B3HT_1 0x00400000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 1 cycle */
|
|
#define B3HT_2 0x00800000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 2 cycles */
|
|
#define B3HT_3 0x00C00000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 3 cycles */
|
|
#define B3HT_0 0x00000000 /* Bank 3 Hold Time from Read or Write deasserted to AOE deasserted = 0 cycles */
|
|
#define B3RAT_1 0x01000000 /* Bank 3 Read Access Time = 1 cycle */
|
|
#define B3RAT_2 0x02000000 /* Bank 3 Read Access Time = 2 cycles */
|
|
#define B3RAT_3 0x03000000 /* Bank 3 Read Access Time = 3 cycles */
|
|
#define B3RAT_4 0x04000000 /* Bank 3 Read Access Time = 4 cycles */
|
|
#define B3RAT_5 0x05000000 /* Bank 3 Read Access Time = 5 cycles */
|
|
#define B3RAT_6 0x06000000 /* Bank 3 Read Access Time = 6 cycles */
|
|
#define B3RAT_7 0x07000000 /* Bank 3 Read Access Time = 7 cycles */
|
|
#define B3RAT_8 0x08000000 /* Bank 3 Read Access Time = 8 cycles */
|
|
#define B3RAT_9 0x09000000 /* Bank 3 Read Access Time = 9 cycles */
|
|
#define B3RAT_10 0x0A000000 /* Bank 3 Read Access Time = 10 cycles */
|
|
#define B3RAT_11 0x0B000000 /* Bank 3 Read Access Time = 11 cycles */
|
|
#define B3RAT_12 0x0C000000 /* Bank 3 Read Access Time = 12 cycles */
|
|
#define B3RAT_13 0x0D000000 /* Bank 3 Read Access Time = 13 cycles */
|
|
#define B3RAT_14 0x0E000000 /* Bank 3 Read Access Time = 14 cycles */
|
|
#define B3RAT_15 0x0F000000 /* Bank 3 Read Access Time = 15 cycles */
|
|
#define B3WAT_1 0x10000000 /* Bank 3 Write Access Time = 1 cycle */
|
|
#define B3WAT_2 0x20000000 /* Bank 3 Write Access Time = 2 cycles */
|
|
#define B3WAT_3 0x30000000 /* Bank 3 Write Access Time = 3 cycles */
|
|
#define B3WAT_4 0x40000000 /* Bank 3 Write Access Time = 4 cycles */
|
|
#define B3WAT_5 0x50000000 /* Bank 3 Write Access Time = 5 cycles */
|
|
#define B3WAT_6 0x60000000 /* Bank 3 Write Access Time = 6 cycles */
|
|
#define B3WAT_7 0x70000000 /* Bank 3 Write Access Time = 7 cycles */
|
|
#define B3WAT_8 0x80000000 /* Bank 3 Write Access Time = 8 cycles */
|
|
#define B3WAT_9 0x90000000 /* Bank 3 Write Access Time = 9 cycles */
|
|
#define B3WAT_10 0xA0000000 /* Bank 3 Write Access Time = 10 cycles */
|
|
#define B3WAT_11 0xB0000000 /* Bank 3 Write Access Time = 11 cycles */
|
|
#define B3WAT_12 0xC0000000 /* Bank 3 Write Access Time = 12 cycles */
|
|
#define B3WAT_13 0xD0000000 /* Bank 3 Write Access Time = 13 cycles */
|
|
#define B3WAT_14 0xE0000000 /* Bank 3 Write Access Time = 14 cycles */
|
|
#define B3WAT_15 0xF0000000 /* Bank 3 Write Access Time = 15 cycles */
|
|
|
|
/* ********************** SDRAM CONTROLLER MASKS *************************** */
|
|
|
|
/* EBIU_SDGCTL Masks */
|
|
#define SCTLE 0x00000001 /* Enable SCLK[0], /SRAS, /SCAS, /SWE, SDQM[3:0] */
|
|
#define CL_2 0x00000008 /* SDRAM CAS latency = 2 cycles */
|
|
#define CL_3 0x0000000C /* SDRAM CAS latency = 3 cycles */
|
|
#define PFE 0x00000010 /* Enable SDRAM prefetch */
|
|
#define PFP 0x00000020 /* Prefetch has priority over AMC requests */
|
|
#define TRAS_1 0x00000040 /* SDRAM tRAS = 1 cycle */
|
|
#define TRAS_2 0x00000080 /* SDRAM tRAS = 2 cycles */
|
|
#define TRAS_3 0x000000C0 /* SDRAM tRAS = 3 cycles */
|
|
#define TRAS_4 0x00000100 /* SDRAM tRAS = 4 cycles */
|
|
#define TRAS_5 0x00000140 /* SDRAM tRAS = 5 cycles */
|
|
#define TRAS_6 0x00000180 /* SDRAM tRAS = 6 cycles */
|
|
#define TRAS_7 0x000001C0 /* SDRAM tRAS = 7 cycles */
|
|
#define TRAS_8 0x00000200 /* SDRAM tRAS = 8 cycles */
|
|
#define TRAS_9 0x00000240 /* SDRAM tRAS = 9 cycles */
|
|
#define TRAS_10 0x00000280 /* SDRAM tRAS = 10 cycles */
|
|
#define TRAS_11 0x000002C0 /* SDRAM tRAS = 11 cycles */
|
|
#define TRAS_12 0x00000300 /* SDRAM tRAS = 12 cycles */
|
|
#define TRAS_13 0x00000340 /* SDRAM tRAS = 13 cycles */
|
|
#define TRAS_14 0x00000380 /* SDRAM tRAS = 14 cycles */
|
|
#define TRAS_15 0x000003C0 /* SDRAM tRAS = 15 cycles */
|
|
#define TRP_1 0x00000800 /* SDRAM tRP = 1 cycle */
|
|
#define TRP_2 0x00001000 /* SDRAM tRP = 2 cycles */
|
|
#define TRP_3 0x00001800 /* SDRAM tRP = 3 cycles */
|
|
#define TRP_4 0x00002000 /* SDRAM tRP = 4 cycles */
|
|
#define TRP_5 0x00002800 /* SDRAM tRP = 5 cycles */
|
|
#define TRP_6 0x00003000 /* SDRAM tRP = 6 cycles */
|
|
#define TRP_7 0x00003800 /* SDRAM tRP = 7 cycles */
|
|
#define TRCD_1 0x00008000 /* SDRAM tRCD = 1 cycle */
|
|
#define TRCD_2 0x00010000 /* SDRAM tRCD = 2 cycles */
|
|
#define TRCD_3 0x00018000 /* SDRAM tRCD = 3 cycles */
|
|
#define TRCD_4 0x00020000 /* SDRAM tRCD = 4 cycles */
|
|
#define TRCD_5 0x00028000 /* SDRAM tRCD = 5 cycles */
|
|
#define TRCD_6 0x00030000 /* SDRAM tRCD = 6 cycles */
|
|
#define TRCD_7 0x00038000 /* SDRAM tRCD = 7 cycles */
|
|
#define TWR_1 0x00080000 /* SDRAM tWR = 1 cycle */
|
|
#define TWR_2 0x00100000 /* SDRAM tWR = 2 cycles */
|
|
#define TWR_3 0x00180000 /* SDRAM tWR = 3 cycles */
|
|
#define PUPSD 0x00200000 /*Power-up start delay */
|
|
#define PSM 0x00400000 /* SDRAM power-up sequence = Precharge, mode register set, 8 CBR refresh cycles */
|
|
#define PSS 0x00800000 /* enable SDRAM power-up sequence on next SDRAM access */
|
|
#define SRFS 0x01000000 /* Start SDRAM self-refresh mode */
|
|
#define EBUFE 0x02000000 /* Enable external buffering timing */
|
|
#define FBBRW 0x04000000 /* Fast back-to-back read write enable */
|
|
#define EMREN 0x10000000 /* Extended mode register enable */
|
|
#define TCSR 0x20000000 /* Temp compensated self refresh value 85 deg C */
|
|
#define CDDBG 0x40000000 /* Tristate SDRAM controls during bus grant */
|
|
|
|
/* EBIU_SDBCTL Masks */
|
|
#define EB0_E 0x00000001 /* Enable SDRAM external bank 0 */
|
|
#define EB0_SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
|
|
#define EB0_SZ_32 0x00000002 /* SDRAM external bank size = 32MB */
|
|
#define EB0_SZ_64 0x00000004 /* SDRAM external bank size = 64MB */
|
|
#define EB0_SZ_128 0x00000006 /* SDRAM external bank size = 128MB */
|
|
#define EB0_CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
|
|
#define EB0_CAW_9 0x00000010 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB0_CAW_10 0x00000020 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB0_CAW_11 0x00000030 /* SDRAM external bank column address width = 9 bits */
|
|
|
|
#define EB1_E 0x00000100 /* Enable SDRAM external bank 1 */
|
|
#define EB1__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
|
|
#define EB1__SZ_32 0x00000200 /* SDRAM external bank size = 32MB */
|
|
#define EB1__SZ_64 0x00000400 /* SDRAM external bank size = 64MB */
|
|
#define EB1__SZ_128 0x00000600 /* SDRAM external bank size = 128MB */
|
|
#define EB1__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
|
|
#define EB1__CAW_9 0x00001000 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB1__CAW_10 0x00002000 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB1__CAW_11 0x00003000 /* SDRAM external bank column address width = 9 bits */
|
|
|
|
#define EB2__E 0x00010000 /* Enable SDRAM external bank 2 */
|
|
#define EB2__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
|
|
#define EB2__SZ_32 0x00020000 /* SDRAM external bank size = 32MB */
|
|
#define EB2__SZ_64 0x00040000 /* SDRAM external bank size = 64MB */
|
|
#define EB2__SZ_128 0x00060000 /* SDRAM external bank size = 128MB */
|
|
#define EB2__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
|
|
#define EB2__CAW_9 0x00100000 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB2__CAW_10 0x00200000 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB2__CAW_11 0x00300000 /* SDRAM external bank column address width = 9 bits */
|
|
|
|
#define EB3__E 0x01000000 /* Enable SDRAM external bank 3 */
|
|
#define EB3__SZ_16 0x00000000 /* SDRAM external bank size = 16MB */
|
|
#define EB3__SZ_32 0x02000000 /* SDRAM external bank size = 32MB */
|
|
#define EB3__SZ_64 0x04000000 /* SDRAM external bank size = 64MB */
|
|
#define EB3__SZ_128 0x06000000 /* SDRAM external bank size = 128MB */
|
|
#define EB3__CAW_8 0x00000000 /* SDRAM external bank column address width = 8 bits */
|
|
#define EB3__CAW_9 0x10000000 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB3__CAW_10 0x20000000 /* SDRAM external bank column address width = 9 bits */
|
|
#define EB3__CAW_11 0x30000000 /* SDRAM external bank column address width = 9 bits */
|
|
|
|
/* EBIU_SDSTAT Masks */
|
|
#define SDCI 0x00000001 /* SDRAM controller is idle */
|
|
#define SDSRA 0x00000002 /* SDRAM SDRAM self refresh is active */
|
|
#define SDPUA 0x00000004 /* SDRAM power up active */
|
|
#define SDRS 0x00000008 /* SDRAM is in reset state */
|
|
#define SDEASE 0x00000010 /* SDRAM EAB sticky error status - W1C */
|
|
#define BGSTAT 0x00000020 /* Bus granted */
|
|
|
|
#endif /* _DEF_BF561_H */
|