kernel-fxtec-pro1x/arch/powerpc/mm/4xx_mmu.c
Jörn Engel 6ab3d5624e Remove obsolete #include <linux/config.h>
Signed-off-by: Jörn Engel <joern@wohnheim.fh-wedel.de>
Signed-off-by: Adrian Bunk <bunk@stusta.de>
2006-06-30 19:25:36 +02:00

136 lines
3.6 KiB
C

/*
* This file contains the routines for initializing the MMU
* on the 4xx series of chips.
* -- paulus
*
* Derived from arch/ppc/mm/init.c:
* Copyright (C) 1995-1996 Gary Thomas (gdt@linuxppc.org)
*
* Modifications by Paul Mackerras (PowerMac) (paulus@cs.anu.edu.au)
* and Cort Dougan (PReP) (cort@cs.nmt.edu)
* Copyright (C) 1996 Paul Mackerras
* Amiga/APUS changes by Jesper Skov (jskov@cygnus.co.uk).
*
* Derived from "arch/i386/mm/init.c"
* Copyright (C) 1991, 1992, 1993, 1994 Linus Torvalds
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
*/
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/types.h>
#include <linux/ptrace.h>
#include <linux/mman.h>
#include <linux/mm.h>
#include <linux/swap.h>
#include <linux/stddef.h>
#include <linux/vmalloc.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <linux/highmem.h>
#include <asm/pgalloc.h>
#include <asm/prom.h>
#include <asm/io.h>
#include <asm/mmu_context.h>
#include <asm/pgtable.h>
#include <asm/mmu.h>
#include <asm/uaccess.h>
#include <asm/smp.h>
#include <asm/bootx.h>
#include <asm/machdep.h>
#include <asm/setup.h>
#include "mmu_decl.h"
extern int __map_without_ltlbs;
/*
* MMU_init_hw does the chip-specific initialization of the MMU hardware.
*/
void __init MMU_init_hw(void)
{
/*
* The Zone Protection Register (ZPR) defines how protection will
* be applied to every page which is a member of a given zone. At
* present, we utilize only two of the 4xx's zones.
* The zone index bits (of ZSEL) in the PTE are used for software
* indicators, except the LSB. For user access, zone 1 is used,
* for kernel access, zone 0 is used. We set all but zone 1
* to zero, allowing only kernel access as indicated in the PTE.
* For zone 1, we set a 01 binary (a value of 10 will not work)
* to allow user access as indicated in the PTE. This also allows
* kernel access as indicated in the PTE.
*/
mtspr(SPRN_ZPR, 0x10000000);
flush_instruction_cache();
/*
* Set up the real-mode cache parameters for the exception vector
* handlers (which are run in real-mode).
*/
mtspr(SPRN_DCWR, 0x00000000); /* All caching is write-back */
/*
* Cache instruction and data space where the exception
* vectors and the kernel live in real-mode.
*/
mtspr(SPRN_DCCR, 0xF0000000); /* 512 MB of data space at 0x0. */
mtspr(SPRN_ICCR, 0xF0000000); /* 512 MB of instr. space at 0x0. */
}
#define LARGE_PAGE_SIZE_16M (1<<24)
#define LARGE_PAGE_SIZE_4M (1<<22)
unsigned long __init mmu_mapin_ram(void)
{
unsigned long v, s;
phys_addr_t p;
v = KERNELBASE;
p = PPC_MEMSTART;
s = 0;
if (__map_without_ltlbs) {
return s;
}
while (s <= (total_lowmem - LARGE_PAGE_SIZE_16M)) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_16M | _PAGE_HWEXEC | _PAGE_HWWRITE;
pmdp = pmd_offset(pgd_offset_k(v), v);
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
pmd_val(*pmdp++) = val;
v += LARGE_PAGE_SIZE_16M;
p += LARGE_PAGE_SIZE_16M;
s += LARGE_PAGE_SIZE_16M;
}
while (s <= (total_lowmem - LARGE_PAGE_SIZE_4M)) {
pmd_t *pmdp;
unsigned long val = p | _PMD_SIZE_4M | _PAGE_HWEXEC | _PAGE_HWWRITE;
pmdp = pmd_offset(pgd_offset_k(v), v);
pmd_val(*pmdp) = val;
v += LARGE_PAGE_SIZE_4M;
p += LARGE_PAGE_SIZE_4M;
s += LARGE_PAGE_SIZE_4M;
}
return s;
}