kernel-fxtec-pro1x/include/asm-i386/desc.h
Rusty Russell 2a57ff1a70 [PATCH] i386: Rename cpu_gdt_descr and remove extern declaration from smpboot.c
When I implemented the DECLARE_PER_CPU(var) macros, I was careful that
people couldn't use "var" in a non-percpu context, by prepending
percpu__.  I never considered that this would allow them to overload
the same name for a per-cpu and a non-percpu variable.

It is only one of many horrors in the i386 boot code, but let's rename
the non-perpcu cpu_gdt_descr to early_gdt_descr (not boot_gdt_descr,
that's something else...)

Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: Andi Kleen <ak@suse.de>

===================================================================
2007-02-13 13:26:26 +01:00

213 lines
5.9 KiB
C

#ifndef __ARCH_DESC_H
#define __ARCH_DESC_H
#include <asm/ldt.h>
#include <asm/segment.h>
#ifndef __ASSEMBLY__
#include <linux/preempt.h>
#include <linux/smp.h>
#include <linux/percpu.h>
#include <asm/mmu.h>
extern struct desc_struct cpu_gdt_table[GDT_ENTRIES];
struct Xgt_desc_struct {
unsigned short size;
unsigned long address __attribute__((packed));
unsigned short pad;
} __attribute__ ((packed));
extern struct Xgt_desc_struct idt_descr;
DECLARE_PER_CPU(struct Xgt_desc_struct, cpu_gdt_descr);
extern struct Xgt_desc_struct early_gdt_descr;
static inline struct desc_struct *get_cpu_gdt_table(unsigned int cpu)
{
return (struct desc_struct *)per_cpu(cpu_gdt_descr, cpu).address;
}
extern struct desc_struct idt_table[];
extern void set_intr_gate(unsigned int irq, void * addr);
static inline void pack_descriptor(__u32 *a, __u32 *b,
unsigned long base, unsigned long limit, unsigned char type, unsigned char flags)
{
*a = ((base & 0xffff) << 16) | (limit & 0xffff);
*b = (base & 0xff000000) | ((base & 0xff0000) >> 16) |
(limit & 0x000f0000) | ((type & 0xff) << 8) | ((flags & 0xf) << 20);
}
static inline void pack_gate(__u32 *a, __u32 *b,
unsigned long base, unsigned short seg, unsigned char type, unsigned char flags)
{
*a = (seg << 16) | (base & 0xffff);
*b = (base & 0xffff0000) | ((type & 0xff) << 8) | (flags & 0xff);
}
#define DESCTYPE_LDT 0x82 /* present, system, DPL-0, LDT */
#define DESCTYPE_TSS 0x89 /* present, system, DPL-0, 32-bit TSS */
#define DESCTYPE_TASK 0x85 /* present, system, DPL-0, task gate */
#define DESCTYPE_INT 0x8e /* present, system, DPL-0, interrupt gate */
#define DESCTYPE_TRAP 0x8f /* present, system, DPL-0, trap gate */
#define DESCTYPE_DPL3 0x60 /* DPL-3 */
#define DESCTYPE_S 0x10 /* !system */
#ifdef CONFIG_PARAVIRT
#include <asm/paravirt.h>
#else
#define load_TR_desc() __asm__ __volatile__("ltr %w0"::"q" (GDT_ENTRY_TSS*8))
#define load_gdt(dtr) __asm__ __volatile("lgdt %0"::"m" (*dtr))
#define load_idt(dtr) __asm__ __volatile("lidt %0"::"m" (*dtr))
#define load_tr(tr) __asm__ __volatile("ltr %0"::"m" (tr))
#define load_ldt(ldt) __asm__ __volatile("lldt %0"::"m" (ldt))
#define store_gdt(dtr) __asm__ ("sgdt %0":"=m" (*dtr))
#define store_idt(dtr) __asm__ ("sidt %0":"=m" (*dtr))
#define store_tr(tr) __asm__ ("str %0":"=m" (tr))
#define store_ldt(ldt) __asm__ ("sldt %0":"=m" (ldt))
#if TLS_SIZE != 24
# error update this code.
#endif
static inline void load_TLS(struct thread_struct *t, unsigned int cpu)
{
#define C(i) get_cpu_gdt_table(cpu)[GDT_ENTRY_TLS_MIN + i] = t->tls_array[i]
C(0); C(1); C(2);
#undef C
}
#define write_ldt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b)
#define write_gdt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b)
#define write_idt_entry(dt, entry, a, b) write_dt_entry(dt, entry, a, b)
static inline void write_dt_entry(void *dt, int entry, __u32 entry_a, __u32 entry_b)
{
__u32 *lp = (__u32 *)((char *)dt + entry*8);
*lp = entry_a;
*(lp+1) = entry_b;
}
#define set_ldt native_set_ldt
#endif /* CONFIG_PARAVIRT */
static inline fastcall void native_set_ldt(const void *addr,
unsigned int entries)
{
if (likely(entries == 0))
__asm__ __volatile__("lldt %w0"::"q" (0));
else {
unsigned cpu = smp_processor_id();
__u32 a, b;
pack_descriptor(&a, &b, (unsigned long)addr,
entries * sizeof(struct desc_struct) - 1,
DESCTYPE_LDT, 0);
write_gdt_entry(get_cpu_gdt_table(cpu), GDT_ENTRY_LDT, a, b);
__asm__ __volatile__("lldt %w0"::"q" (GDT_ENTRY_LDT*8));
}
}
static inline void _set_gate(int gate, unsigned int type, void *addr, unsigned short seg)
{
__u32 a, b;
pack_gate(&a, &b, (unsigned long)addr, seg, type, 0);
write_idt_entry(idt_table, gate, a, b);
}
static inline void __set_tss_desc(unsigned int cpu, unsigned int entry, const void *addr)
{
__u32 a, b;
pack_descriptor(&a, &b, (unsigned long)addr,
offsetof(struct tss_struct, __cacheline_filler) - 1,
DESCTYPE_TSS, 0);
write_gdt_entry(get_cpu_gdt_table(cpu), entry, a, b);
}
#define set_tss_desc(cpu,addr) __set_tss_desc(cpu, GDT_ENTRY_TSS, addr)
#define LDT_entry_a(info) \
((((info)->base_addr & 0x0000ffff) << 16) | ((info)->limit & 0x0ffff))
#define LDT_entry_b(info) \
(((info)->base_addr & 0xff000000) | \
(((info)->base_addr & 0x00ff0000) >> 16) | \
((info)->limit & 0xf0000) | \
(((info)->read_exec_only ^ 1) << 9) | \
((info)->contents << 10) | \
(((info)->seg_not_present ^ 1) << 15) | \
((info)->seg_32bit << 22) | \
((info)->limit_in_pages << 23) | \
((info)->useable << 20) | \
0x7000)
#define LDT_empty(info) (\
(info)->base_addr == 0 && \
(info)->limit == 0 && \
(info)->contents == 0 && \
(info)->read_exec_only == 1 && \
(info)->seg_32bit == 0 && \
(info)->limit_in_pages == 0 && \
(info)->seg_not_present == 1 && \
(info)->useable == 0 )
static inline void clear_LDT(void)
{
set_ldt(NULL, 0);
}
/*
* load one particular LDT into the current CPU
*/
static inline void load_LDT_nolock(mm_context_t *pc)
{
set_ldt(pc->ldt, pc->size);
}
static inline void load_LDT(mm_context_t *pc)
{
preempt_disable();
load_LDT_nolock(pc);
preempt_enable();
}
static inline unsigned long get_desc_base(unsigned long *desc)
{
unsigned long base;
base = ((desc[0] >> 16) & 0x0000ffff) |
((desc[1] << 16) & 0x00ff0000) |
(desc[1] & 0xff000000);
return base;
}
#else /* __ASSEMBLY__ */
/*
* GET_DESC_BASE reads the descriptor base of the specified segment.
*
* Args:
* idx - descriptor index
* gdt - GDT pointer
* base - 32bit register to which the base will be written
* lo_w - lo word of the "base" register
* lo_b - lo byte of the "base" register
* hi_b - hi byte of the low word of the "base" register
*
* Example:
* GET_DESC_BASE(GDT_ENTRY_ESPFIX_SS, %ebx, %eax, %ax, %al, %ah)
* Will read the base address of GDT_ENTRY_ESPFIX_SS and put it into %eax.
*/
#define GET_DESC_BASE(idx, gdt, base, lo_w, lo_b, hi_b) \
movb idx*8+4(gdt), lo_b; \
movb idx*8+7(gdt), hi_b; \
shll $16, base; \
movw idx*8+2(gdt), lo_w;
#endif /* !__ASSEMBLY__ */
#endif