5b85e04e93
These are called by sa11x0_drv_pcmcia_probe (which is marked now with __devinit) so they can go to .devinit.text now, too. This fixes: WARNING: drivers/pcmcia/sa1100_cs.o(.text+0x10): Section mismatch in reference from the function sa11x0_drv_pcmcia_probe() to the function .init.text:pcmcia_simpad_init() The function sa11x0_drv_pcmcia_probe() references the function __init pcmcia_simpad_init(). This is often because sa11x0_drv_pcmcia_probe lacks a __init annotation or the annotation of pcmcia_simpad_init is wrong. and a similar warning for pcmcia_collie_init, pcmcia_cerf_init, pcmcia_h3600_init and pcmcia_shannon_init. While at it mark pcmcia_assabet_init with __devinit, too. Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de> CC: Russell King <linux@arm.linux.org.uk> CC: Eric Miao <eric.y.miao@gmail.com> CC: linux-arm-kernel@lists.infradead.org Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
230 lines
5.8 KiB
C
230 lines
5.8 KiB
C
/*
|
|
* drivers/pcmcia/sa1100_h3600.c
|
|
*
|
|
* PCMCIA implementation routines for H3600
|
|
*
|
|
*/
|
|
#include <linux/module.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio.h>
|
|
|
|
#include <mach/hardware.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/mach-types.h>
|
|
#include <mach/h3xxx.h>
|
|
|
|
#include "sa1100_generic.h"
|
|
|
|
static struct pcmcia_irqs irqs[] = {
|
|
{ .sock = 0, .str = "PCMCIA CD0" }, /* .irq will be filled later */
|
|
{ .sock = 1, .str = "PCMCIA CD1" }
|
|
};
|
|
|
|
static int h3600_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
|
|
{
|
|
int err;
|
|
|
|
switch (skt->nr) {
|
|
case 0:
|
|
err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ0, "PCMCIA IRQ0");
|
|
if (err)
|
|
goto err00;
|
|
err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ0);
|
|
if (err)
|
|
goto err01;
|
|
skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ0);
|
|
|
|
err = gpio_request(H3XXX_GPIO_PCMCIA_CD0, "PCMCIA CD0");
|
|
if (err)
|
|
goto err01;
|
|
err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD0);
|
|
if (err)
|
|
goto err02;
|
|
irqs[0].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD0);
|
|
|
|
err = gpio_request(H3XXX_EGPIO_OPT_NVRAM_ON, "OPT NVRAM ON");
|
|
if (err)
|
|
goto err02;
|
|
err = gpio_direction_output(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
|
|
if (err)
|
|
goto err03;
|
|
err = gpio_request(H3XXX_EGPIO_OPT_ON, "OPT ON");
|
|
if (err)
|
|
goto err03;
|
|
err = gpio_direction_output(H3XXX_EGPIO_OPT_ON, 0);
|
|
if (err)
|
|
goto err04;
|
|
err = gpio_request(H3XXX_EGPIO_OPT_RESET, "OPT RESET");
|
|
if (err)
|
|
goto err04;
|
|
err = gpio_direction_output(H3XXX_EGPIO_OPT_RESET, 0);
|
|
if (err)
|
|
goto err05;
|
|
err = gpio_request(H3XXX_EGPIO_CARD_RESET, "PCMCIA CARD RESET");
|
|
if (err)
|
|
goto err05;
|
|
err = gpio_direction_output(H3XXX_EGPIO_CARD_RESET, 0);
|
|
if (err)
|
|
goto err06;
|
|
err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
if (err)
|
|
goto err06;
|
|
break;
|
|
case 1:
|
|
err = gpio_request(H3XXX_GPIO_PCMCIA_IRQ1, "PCMCIA IRQ1");
|
|
if (err)
|
|
goto err10;
|
|
err = gpio_direction_input(H3XXX_GPIO_PCMCIA_IRQ1);
|
|
if (err)
|
|
goto err11;
|
|
skt->socket.pci_irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_IRQ1);
|
|
|
|
err = gpio_request(H3XXX_GPIO_PCMCIA_CD1, "PCMCIA CD1");
|
|
if (err)
|
|
goto err11;
|
|
err = gpio_direction_input(H3XXX_GPIO_PCMCIA_CD1);
|
|
if (err)
|
|
goto err12;
|
|
irqs[1].irq = gpio_to_irq(H3XXX_GPIO_PCMCIA_CD1);
|
|
|
|
err = soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
if (err)
|
|
goto err12;
|
|
break;
|
|
}
|
|
return 0;
|
|
|
|
err06: gpio_free(H3XXX_EGPIO_CARD_RESET);
|
|
err05: gpio_free(H3XXX_EGPIO_OPT_RESET);
|
|
err04: gpio_free(H3XXX_EGPIO_OPT_ON);
|
|
err03: gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
|
|
err02: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
|
|
err01: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
|
|
err00: return err;
|
|
|
|
err12: gpio_free(H3XXX_GPIO_PCMCIA_CD0);
|
|
err11: gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
|
|
err10: return err;
|
|
}
|
|
|
|
static void h3600_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
|
|
{
|
|
soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
|
|
switch (skt->nr) {
|
|
case 0:
|
|
/* Disable CF bus: */
|
|
gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
|
|
gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
|
|
gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
|
|
|
|
gpio_free(H3XXX_EGPIO_CARD_RESET);
|
|
gpio_free(H3XXX_EGPIO_OPT_RESET);
|
|
gpio_free(H3XXX_EGPIO_OPT_ON);
|
|
gpio_free(H3XXX_EGPIO_OPT_NVRAM_ON);
|
|
gpio_free(H3XXX_GPIO_PCMCIA_CD0);
|
|
gpio_free(H3XXX_GPIO_PCMCIA_IRQ0);
|
|
break;
|
|
case 1:
|
|
gpio_free(H3XXX_GPIO_PCMCIA_CD1);
|
|
gpio_free(H3XXX_GPIO_PCMCIA_IRQ1);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static void
|
|
h3600_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state)
|
|
{
|
|
switch (skt->nr) {
|
|
case 0:
|
|
state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD0);
|
|
state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ0);
|
|
state->bvd1 = 0;
|
|
state->bvd2 = 0;
|
|
state->wrprot = 0; /* Not available on H3600. */
|
|
state->vs_3v = 0;
|
|
state->vs_Xv = 0;
|
|
break;
|
|
|
|
case 1:
|
|
state->detect = !gpio_get_value(H3XXX_GPIO_PCMCIA_CD1);
|
|
state->ready = !!gpio_get_value(H3XXX_GPIO_PCMCIA_IRQ1);
|
|
state->bvd1 = 0;
|
|
state->bvd2 = 0;
|
|
state->wrprot = 0; /* Not available on H3600. */
|
|
state->vs_3v = 0;
|
|
state->vs_Xv = 0;
|
|
break;
|
|
}
|
|
}
|
|
|
|
static int
|
|
h3600_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state)
|
|
{
|
|
if (state->Vcc != 0 && state->Vcc != 33 && state->Vcc != 50) {
|
|
printk(KERN_ERR "h3600_pcmcia: unrecognized Vcc %u.%uV\n",
|
|
state->Vcc / 10, state->Vcc % 10);
|
|
return -1;
|
|
}
|
|
|
|
gpio_set_value(H3XXX_EGPIO_CARD_RESET, !!(state->flags & SS_RESET));
|
|
|
|
/* Silently ignore Vpp, output enable, speaker enable. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void h3600_pcmcia_socket_init(struct soc_pcmcia_socket *skt)
|
|
{
|
|
/* Enable CF bus: */
|
|
gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 1);
|
|
gpio_set_value(H3XXX_EGPIO_OPT_ON, 1);
|
|
gpio_set_value(H3XXX_EGPIO_OPT_RESET, 0);
|
|
|
|
msleep(10);
|
|
|
|
soc_pcmcia_enable_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
}
|
|
|
|
static void h3600_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt)
|
|
{
|
|
soc_pcmcia_disable_irqs(skt, irqs, ARRAY_SIZE(irqs));
|
|
|
|
/*
|
|
* FIXME: This doesn't fit well. We don't have the mechanism in
|
|
* the generic PCMCIA layer to deal with the idea of two sockets
|
|
* on one bus. We rely on the cs.c behaviour shutting down
|
|
* socket 0 then socket 1.
|
|
*/
|
|
if (skt->nr == 1) {
|
|
gpio_set_value(H3XXX_EGPIO_OPT_ON, 0);
|
|
gpio_set_value(H3XXX_EGPIO_OPT_NVRAM_ON, 0);
|
|
/* hmm, does this suck power? */
|
|
gpio_set_value(H3XXX_EGPIO_OPT_RESET, 1);
|
|
}
|
|
}
|
|
|
|
struct pcmcia_low_level h3600_pcmcia_ops = {
|
|
.owner = THIS_MODULE,
|
|
.hw_init = h3600_pcmcia_hw_init,
|
|
.hw_shutdown = h3600_pcmcia_hw_shutdown,
|
|
.socket_state = h3600_pcmcia_socket_state,
|
|
.configure_socket = h3600_pcmcia_configure_socket,
|
|
|
|
.socket_init = h3600_pcmcia_socket_init,
|
|
.socket_suspend = h3600_pcmcia_socket_suspend,
|
|
};
|
|
|
|
int __devinit pcmcia_h3600_init(struct device *dev)
|
|
{
|
|
int ret = -ENODEV;
|
|
|
|
if (machine_is_h3600() || machine_is_h3100())
|
|
ret = sa11xx_drv_pcmcia_probe(dev, &h3600_pcmcia_ops, 0, 2);
|
|
|
|
return ret;
|
|
}
|