Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/drivers/scsi/isci/core/intel_sas.h
Dan Williams 6f231dda68 isci: Intel(R) C600 Series Chipset Storage Control Unit Driver 
Support for the up to 2x4-port 6Gb/s SAS controllers embedded in the
chipset.

This is a snapshot of the first publicly available version of the driver,
commit 4c1db2d0 in the 'historical' branch.

   git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git historical

Signed-off-by: Maciej Trela <maciej.trela@intel.com>
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Edmund Nadolski <edmund.nadolski@intel.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
2011-07-02 22:56:22 -07:00

948 lines
26 KiB
C
Raw Blame History

/*
* This file is provided under a dual BSD/GPLv2 license. When using or
* redistributing this file, you may do so under either license.
*
* GPL LICENSE SUMMARY
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
* The full GNU General Public License is included in this distribution
* in the file called LICENSE.GPL.
*
* BSD LICENSE
*
* Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* * Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* * Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in
* the documentation and/or other materials provided with the
* distribution.
* * Neither the name of Intel Corporation nor the names of its
* contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*/
#ifndef _INTEL_SAS_H_
#define _INTEL_SAS_H_
/**
* This file contains all of the definitions relating to structures, constants,
* etc. defined by the SAS specification.
*
*
*/
#include "intel_sata.h"
#include "intel_scsi.h"
/**
* struct sci_sas_address - This structure depicts how a SAS address is
* represented by SCI.
*
*
*/
struct sci_sas_address {
/**
* This member contains the higher 32-bits of the SAS address.
*/
u32 high;
/**
* This member contains the lower 32-bits of the SAS address.
*/
u32 low;
};
/**
* struct sci_sas_identify_address_frame_protocols - This structure depicts the
* contents of bytes 2 and 3 in the SAS IDENTIFY ADDRESS FRAME (IAF).
*
* For specific information on each of these individual fields please reference
* the SAS specification Link layer section on address frames.
*/
struct sci_sas_identify_address_frame_protocols {
union {
struct {
u16 restricted1:1;
u16 smp_initiator:1;
u16 stp_initiator:1;
u16 ssp_initiator:1;
u16 reserved3:4;
u16 restricted2:1;
u16 smp_target:1;
u16 stp_target:1;
u16 ssp_target:1;
u16 reserved4:4;
} bits;
u16 all;
} u;
};
/**
* struct sci_sas_identify_address_frame - This structure depicts the contents
* of the SAS IDENTIFY ADDRESS FRAME (IAF).
*
* For specific information on each of these individual fields please reference
* the SAS specification Link layer section on address frames.
*/
struct sci_sas_identify_address_frame {
u16 address_frame_type:4;
u16 device_type:3;
u16 reserved1:1;
u16 reason:4;
u16 reserved2:4;
struct sci_sas_identify_address_frame_protocols protocols;
struct sci_sas_address device_name;
struct sci_sas_address sas_address;
u32 phy_identifier:8;
u32 break_reply_capable:1;
u32 requested_in_zpsds:1;
u32 in_zpsds_persistent:1;
u32 reserved5:21;
u32 reserved6[4];
};
/**
* struct sas_capabilities - This structure depicts the various SAS
* capabilities supported by the directly attached target device. For
* specific information on each of these individual fields please reference
* the SAS specification Phy layer section on speed negotiation windows.
*
*
*/
struct sas_capabilities {
union {
#if defined (SCIC_SDS_4_ENABLED)
struct {
/**
* The SAS specification indicates the start bit shall always be set to
* 1. This implementation will have the start bit set to 0 if the
* PHY CAPABILITIES were either not received or speed negotiation failed.
*/
u32 start:1;
u32 tx_ssc_type:1;
u32 reserved1:2;
u32 requested_logical_link_rate:4;
u32 gen1_without_ssc_supported:1;
u32 gen1_with_ssc_supported:1;
u32 gen2_without_ssc_supported:1;
u32 gen2_with_ssc_supported:1;
u32 gen3_without_ssc_supported:1;
u32 gen3_with_ssc_supported:1;
u32 reserved2:17;
u32 parity:1;
} bits;
#endif /* (SCIC_SDS_4_ENABLED) */
u32 all;
} u;
};
/**
* enum _SCI_SAS_LINK_RATE - This enumeration depicts the SAS specification
* defined link speeds.
*
*
*/
enum sci_sas_link_rate {
SCI_SAS_NO_LINK_RATE = 0,
SCI_SATA_SPINUP_HOLD = 0x3,
SCI_SAS_150_GB = 0x8,
SCI_SAS_300_GB = 0x9,
SCI_SAS_600_GB = 0xA
};
/**
* enum _SCI_SAS_TASK_ATTRIBUTE - This enumeration depicts the SAM/SAS
* specification defined task attribute values for a command information
* unit.
*
*
*/
enum sci_sas_task_attribute {
SCI_SAS_SIMPLE_ATTRIBUTE = 0,
SCI_SAS_HEAD_OF_QUEUE_ATTRIBUTE = 1,
SCI_SAS_ORDERED_ATTRIBUTE = 2,
SCI_SAS_ACA_ATTRIBUTE = 4,
};
/**
* enum _SCI_SAS_TASK_MGMT_FUNCTION - This enumeration depicts the SAM/SAS
* specification defined task management functions.
*
* This HARD_RESET function listed here is not actually defined as a task
* management function in the industry standard.
*/
enum sci_sas_task_mgmt_function {
SCI_SAS_ABORT_TASK = SCSI_TASK_REQUEST_ABORT_TASK,
SCI_SAS_ABORT_TASK_SET = SCSI_TASK_REQUEST_ABORT_TASK_SET,
SCI_SAS_CLEAR_TASK_SET = SCSI_TASK_REQUEST_CLEAR_TASK_SET,
SCI_SAS_LOGICAL_UNIT_RESET = SCSI_TASK_REQUEST_LOGICAL_UNIT_RESET,
SCI_SAS_I_T_NEXUS_RESET = SCSI_TASK_REQUEST_I_T_NEXUS_RESET,
SCI_SAS_CLEAR_ACA = SCSI_TASK_REQUEST_CLEAR_ACA,
SCI_SAS_QUERY_TASK = SCSI_TASK_REQUEST_QUERY_TASK,
SCI_SAS_QUERY_TASK_SET = SCSI_TASK_REQUEST_QUERY_TASK_SET,
SCI_SAS_QUERY_ASYNCHRONOUS_EVENT = SCSI_TASK_REQUEST_QUERY_UNIT_ATTENTION,
SCI_SAS_HARD_RESET = 0xFF
};
/**
* enum _SCI_SAS_FRAME_TYPE - This enumeration depicts the SAS specification
* defined SSP frame types.
*
*
*/
enum sci_sas_frame_type {
SCI_SAS_DATA_FRAME = 0x01,
SCI_SAS_XFER_RDY_FRAME = 0x05,
SCI_SAS_COMMAND_FRAME = 0x06,
SCI_SAS_RESPONSE_FRAME = 0x07,
SCI_SAS_TASK_FRAME = 0x16
};
/**
* struct sci_ssp_command_iu - This structure depicts the contents of the SSP
* COMMAND INFORMATION UNIT. For specific information on each of these
* individual fields please reference the SAS specification SSP transport
* layer section.
*
*
*/
struct sci_ssp_command_iu {
u32 lun_upper;
u32 lun_lower;
u32 additional_cdb_length:6;
u32 reserved0:2;
u32 reserved1:8;
u32 enable_first_burst:1;
u32 task_priority:4;
u32 task_attribute:3;
u32 reserved2:8;
u32 cdb[4];
};
/**
* struct sci_ssp_task_iu - This structure depicts the contents of the SSP TASK
* INFORMATION UNIT. For specific information on each of these individual
* fields please reference the SAS specification SSP transport layer section.
*
*
*/
struct sci_ssp_task_iu {
u32 lun_upper;
u32 lun_lower;
u32 reserved0:8;
u32 task_function:8;
u32 reserved1:8;
u32 reserved2:8;
u32 reserved3:16;
u32 task_tag:16;
u32 reserved4[3];
};
#define SSP_RESPONSE_IU_MAX_DATA 64
#define SCI_SSP_RESPONSE_IU_DATA_PRESENT_MASK (0x03)
#define sci_ssp_get_sense_data_length(sense_data_length_buffer) \
SCIC_BUILD_DWORD(sense_data_length_buffer)
#define sci_ssp_get_response_data_length(response_data_length_buffer) \
SCIC_BUILD_DWORD(response_data_length_buffer)
/**
* struct sci_ssp_response_iu - This structure depicts the contents of the SSP
* RESPONSE INFORMATION UNIT. For specific information on each of these
* individual fields please reference the SAS specification SSP transport
* layer section.
*
*
*/
struct sci_ssp_response_iu {
u8 reserved0[8];
u8 retry_delay_timer[2];
u8 data_present;
u8 status;
u8 reserved1[4];
u8 sense_data_length[4];
u8 response_data_length[4];
u32 data[SSP_RESPONSE_IU_MAX_DATA];
};
/**
* enum _SCI_SAS_DATA_PRESENT_TYPE - This enumeration depicts the SAS
* specification defined SSP data present types in struct sci_ssp_response_iu.
*
*
*/
enum sci_ssp_response_iu_data_present_type {
SCI_SSP_RESPONSE_IU_NO_DATA = 0x00,
SCI_SSP_RESPONSE_IU_RESPONSE_DATA = 0x01,
SCI_SSP_RESPONSE_IU_SENSE_DATA = 0x02
};
/**
* struct sci_ssp_frame_header - This structure depicts the contents of an SSP
* frame header. For specific information on the individual fields please
* reference the SAS specification transport layer SSP frame format.
*
*
*/
struct sci_ssp_frame_header {
/* Word 0 */
u32 hashed_destination_address:24;
u32 frame_type:8;
/* Word 1 */
u32 hashed_source_address:24;
u32 reserved1_0:8;
/* Word 2 */
u32 reserved2_2:6;
u32 fill_bytes:2;
u32 reserved2_1:3;
u32 tlr_control:2;
u32 retry_data_frames:1;
u32 retransmit:1;
u32 changing_data_pointer:1;
u32 reserved2_0:16;
/* Word 3 */
u32 uiResv4;
/* Word 4 */
u16 target_port_transfer_tag;
u16 tag;
/* Word 5 */
u32 data_offset;
};
/**
* struct smp_request_header - This structure defines the contents of an SMP
* Request header.
*
* For specific information on each of these individual fields please reference
* the SAS specification.
*/
struct smp_request_header {
u8 smp_frame_type; /* byte 0 */
u8 function; /* byte 1 */
u8 allocated_response_length; /* byte 2 */
u8 request_length; /* byte 3 */
};
/**
* struct smp_response_header - This structure depicts the contents of the SAS
* SMP DISCOVER RESPONSE frame. For specific information on each of these
* individual fields please reference the SAS specification Link layer
* section on address frames.
*
*
*/
struct smp_response_header {
u8 smp_frame_type; /* byte 0 */
u8 function; /* byte 1 */
u8 function_result; /* byte 2 */
u8 response_length; /* byte 3 */
};
/**
* struct smp_request_general - This structure defines the contents of an SMP
* Request that is comprised of the struct smp_request_header and a CRC.
*
* For specific information on each of these individual fields please reference
* the SAS specification.
*/
struct smp_request_general {
u32 crc; /* bytes 4-7 */
};
/**
* struct smp_request_phy_identifier - This structure defines the contents of
* an SMP Request that is comprised of the struct smp_request_header and a phy
* identifier. Examples: SMP_REQUEST_DISCOVER, SMP_REQUEST_REPORT_PHY_SATA.
*
* For specific information on each of these individual fields please reference
* the SAS specification.
*/
struct smp_request_phy_identifier {
u32 reserved_byte4_7; /* bytes 4-7 */
u32 ignore_zone_group:1; /* byte 8 */
u32 reserved_byte8:7;
u32 phy_identifier:8; /* byte 9 */
u32 reserved_byte10:8; /* byte 10 */
u32 reserved_byte11:8; /* byte 11 */
};
/**
* struct smp_request_configure_route_information - This structure defines the
* contents of an SMP Configure Route Information request.
*
* For specific information on each of these individual fields please reference
* the SAS specification.
*/
struct smp_request_configure_route_information {
u32 expected_expander_change_count:16; /* bytes 4-5 */
u32 expander_route_index_high:8;
u32 expander_route_index:8; /* bytes 6-7 */
u32 reserved_byte8:8; /* bytes 8 */
u32 phy_identifier:8; /* bytes 9 */
u32 reserved_byte_10_11:16; /* bytes 10-11 */
u32 reserved_byte_12_bit_0_6:7;
u32 disable_route_entry:1; /* byte 12 */
u32 reserved_byte_13_15:24; /* bytes 13-15 */
u32 routed_sas_address[2]; /* bytes 16-23 */
u8 reserved_byte_24_39[16]; /* bytes 24-39 */
};
/**
* struct smp_request_phy_control - This structure defines the contents of an
* SMP Phy Controler request.
*
* For specific information on each of these individual fields please reference
* the SAS specification.
*/
struct smp_request_phy_control {
u16 expected_expander_change_count; /* byte 4-5 */
u16 reserved_byte_6_7; /* byte 6-7 */
u8 reserved_byte_8; /* byte 8 */
u8 phy_identifier; /* byte 9 */
u8 phy_operation; /* byte 10 */
u8 update_partial_pathway_timeout_value:1;
u8 reserved_byte_11_bit_1_7:7; /* byte 11 */
u8 reserved_byte_12_23[12]; /* byte 12-23 */
u8 attached_device_name[8]; /* byte 24-31 */
u8 reserved_byte_32_bit_3_0:4; /* byte 32 */
u8 programmed_minimum_physical_link_rate:4;
u8 reserved_byte_33_bit_3_0:4; /* byte 33 */
u8 programmed_maximum_physical_link_rate:4;
u16 reserved_byte_34_35; /* byte 34-35 */
u8 partial_pathway_timeout_value:4;
u8 reserved_byte_36_bit_4_7:4; /* byte 36 */
u16 reserved_byte_37_38; /* byte 37-38 */
u8 reserved_byte_39; /* byte 39 */
};
/**
* struct smp_request_vendor_specific - This structure depicts the vendor
* specific space for SMP request.
*
*
*/
#define SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH 1016
struct smp_request_vendor_specific {
u8 request_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH];
};
/**
* struct smp_request - This structure simply unionizes the existing request
* structures into a common request type.
*
*
*/
struct smp_request {
struct smp_request_header header;
union { /* bytes 4-N */
struct smp_request_general report_general;
struct smp_request_phy_identifier discover;
struct smp_request_general report_manufacturer_information;
struct smp_request_phy_identifier report_phy_sata;
struct smp_request_phy_control phy_control;
struct smp_request_phy_identifier report_phy_error_log;
struct smp_request_phy_identifier report_route_information;
struct smp_request_configure_route_information configure_route_information;
struct smp_request_vendor_specific vendor_specific_request;
} request;
};
/**
* struct smp_response_report_general - This structure depicts the SMP Report
* General for expander devices. It adheres to the SAS-2.1 specification.
*
* For specific information on each of these individual fields please reference
* the SAS specification Application layer section on SMP.
*/
struct smp_response_report_general {
u16 expander_change_count; /* byte 4-5 */
u16 expander_route_indexes; /* byte 6-7 */
u32 reserved_byte8:7; /* byte 8 bit 0-6 */
u32 long_response:1; /* byte 8 bit 7 */
u32 number_of_phys:8; /* byte 9 */
u32 configurable_route_table:1; /* byte 10 */
u32 configuring:1;
u32 configures_others:1;
u32 open_reject_retry_supported:1;
u32 stp_continue_awt:1;
u32 self_configuring:1;
u32 zone_configuring:1;
u32 table_to_table_supported:1;
u32 reserved_byte11:8; /* byte 11 */
u32 enclosure_logical_identifier_high; /* byte 12-15 */
u32 enclosure_logical_identifier_low; /* byte 16-19 */
u32 reserved_byte20_23;
u32 reserved_byte24_27;
};
struct smp_response_report_general_long {
struct smp_response_report_general sas1_1;
struct {
u16 reserved1;
u16 stp_bus_inactivity_time_limit;
u16 stp_max_connect_time_limit;
u16 stp_smp_i_t_nexus_loss_time;
u32 zoning_enabled:1;
u32 zoning_supported:1;
u32 physicaL_presence_asserted:1;
u32 zone_locked:1;
u32 reserved2:1;
u32 num_zone_groups:3;
u32 saving_zoning_enabled_supported:3;
u32 saving_zone_perms_table_supported:1;
u32 saving_zone_phy_info_supported:1;
u32 saving_zone_manager_password_supported:1;
u32 saving:1;
u32 reserved3:1;
u32 max_number_routed_sas_addresses:16;
struct sci_sas_address active_zone_manager_sas_address;
u16 zone_lock_inactivity_time_limit;
u16 reserved4;
u8 reserved5;
u8 first_enclosure_connector_element_index;
u8 number_of_enclosure_connector_element_indices;
u8 reserved6;
u32 reserved7:7;
u32 reduced_functionality:1;
u32 time_to_reduce_functionality:8;
u32 initial_time_to_reduce_functionality:8;
u8 max_reduced_functionality_time;
u16 last_self_config_status_descriptor_index;
u16 max_number_of_stored_self_config_status_descriptors;
u16 last_phy_event_list_descriptor_index;
u16 max_number_of_stored_phy_event_list_descriptors;
} sas2;
};
/**
* struct smp_response_report_manufacturer_information - This structure depicts
* the SMP report manufacturer information for expander devices. It adheres
* to the SAS-2.1 specification.
*
* For specific information on each of these individual fields please reference
* the SAS specification Application layer section on SMP.
*/
struct smp_response_report_manufacturer_information {
u32 expander_change_count:16; /* bytes 4-5 */
u32 reserved1:16;
u32 sas1_1_format:1;
u32 reserved2:31;
u8 vendor_id[8];
u8 product_id[16];
u8 product_revision_level[4];
u8 component_vendor_id[8];
u8 component_id[2];
u8 component_revision_level;
u8 reserved3;
u8 vendor_specific[8];
};
#define SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE 52
#define SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE 116
/**
* struct smp_discover_response_protocols - This structure depicts the discover
* response where the supported protocols by the remote phy are specified.
*
* For specific information on each of these individual fields please reference
* the SAS specification Link layer section on address frames.
*/
struct smp_discover_response_protocols {
union {
struct {
u16 attached_sata_host:1;
u16 attached_smp_initiator:1;
u16 attached_stp_initiator:1;
u16 attached_ssp_initiator:1;
u16 reserved3:4;
u16 attached_sata_device:1;
u16 attached_smp_target:1;
u16 attached_stp_target:1;
u16 attached_ssp_target:1;
u16 reserved4:3;
u16 attached_sata_port_selector:1;
} bits;
u16 all;
} u;
};
/**
* struct SMP_RESPONSE_DISCOVER_FORMAT - This structure defines the SMP phy
* discover response format. It handles both SAS1.1 and SAS 2 definitions.
* The unions indicate locations where the SAS specification versions differ
* from one another.
*
*
*/
struct smp_response_discover {
union {
struct {
u8 reserved[2];
} sas1_1;
struct {
u16 expander_change_count;
} sas2;
} u1;
u8 reserved1[3];
u8 phy_identifier;
u8 reserved2[2];
union {
struct {
u16 reserved1:4;
u16 attached_device_type:3;
u16 reserved2:1;
u16 negotiated_physical_link_rate:4;
u16 reserved3:4;
} sas1_1;
struct {
u16 attached_reason:4;
u16 attached_device_type:3;
u16 reserved2:1;
u16 negotiated_logical_link_rate:4;
u16 reserved3:4;
} sas2;
} u2;
struct smp_discover_response_protocols protocols;
struct sci_sas_address sas_address;
struct sci_sas_address attached_sas_address;
u8 attached_phy_identifier;
union {
struct {
u8 reserved;
} sas1_1;
struct {
u8 attached_break_reply_capable:1;
u8 attached_requested_inside_zpsds:1;
u8 attached_inside_zpsds_persistent:1;
u8 reserved1:5;
} sas2;
} u3;
u8 reserved_for_identify[6];
u32 hardware_min_physical_link_rate:4;
u32 programmed_min_physical_link_rate:4;
u32 hardware_max_physical_link_rate:4;
u32 programmed_max_physical_link_rate:4;
u32 phy_change_count:8;
u32 partial_pathway_timeout_value:4;
u32 reserved5:3;
u32 virtual_phy:1;
u32 routing_attribute:4;
u32 reserved6:4;
u32 connector_type:7;
u32 reserved7:1;
u32 connector_element_index:8;
u32 connector_physical_link:8;
u16 reserved8;
u16 vendor_specific;
union {
struct {
/**
* In the SAS 1.1 specification this structure ends after 52 bytes.
* As a result, the contents of this field should never have a
* real value. It is undefined.
*/
u8 undefined[SMP_RESPONSE_DISCOVER_FORMAT_2_SIZE
- SMP_RESPONSE_DISCOVER_FORMAT_1_1_SIZE];
} sas1_1;
struct {
struct sci_sas_address attached_device_name;
u32 zoning_enabled:1;
u32 inside_zpsds:1;
u32 zone_group_persistent:1;
u32 reserved1:1;
u32 requested_inside_zpsds:1;
u32 inside_zpsds_persistent:1;
u32 requested_inside_zpsds_changed_by_expander:1;
u32 reserved2:1;
u32 reserved_for_zoning_fields:16;
u32 zone_group:8;
u8 self_configuration_status;
u8 self_configuration_levels_completed;
u16 reserved_for_self_config_fields;
struct sci_sas_address self_configuration_sas_address;
u32 programmed_phy_capabilities;
u32 current_phy_capabilities;
u32 attached_phy_capabilities;
u32 reserved3;
u32 reserved4:16;
u32 negotiated_physical_link_rate:4;
u32 reason:4;
u32 hardware_muxing_supported:1;
u32 negotiated_ssc:1;
u32 reserved5:6;
u32 default_zoning_enabled:1;
u32 reserved6:1;
u32 default_zone_group_persistent:1;
u32 reserved7:1;
u32 default_requested_inside_zpsds:1;
u32 default_inside_zpsds_persistent:1;
u32 reserved8:2;
u32 reserved9:16;
u32 default_zone_group:8;
u32 saved_zoning_enabled:1;
u32 reserved10:1;
u32 saved_zone_group_persistent:1;
u32 reserved11:1;
u32 saved_requested_inside_zpsds:1;
u32 saved_inside_zpsds_persistent:1;
u32 reserved12:18;
u32 saved_zone_group:8;
u32 reserved14:2;
u32 shadow_zone_group_persistent:1;
u32 reserved15:1;
u32 shadow_requested_inside_zpsds:1;
u32 shadow_inside_zpsds_persistent:1;
u32 reserved16:18;
u32 shadow_zone_group:8;
u8 device_slot_number;
u8 device_slot_group_number;
u8 device_slot_group_output_connector[6];
} sas2;
} u4;
};
/**
* struct smp_response_report_phy_sata - This structure depicts the contents of
* the SAS SMP REPORT PHY SATA frame. For specific information on each of
* these individual fields please reference the SAS specification Link layer
* section on address frames.
*
*
*/
struct smp_response_report_phy_sata {
u32 ignored_byte_4_7; /* bytes 4-7 */
u32 affiliations_valid:1;
u32 affiliations_supported:1;
u32 reserved_byte11:6; /* byte 11 */
u32 ignored_byte10:8; /* byte 10 */
u32 phy_identifier:8; /* byte 9 */
u32 reserved_byte_8:8; /* byte 8 */
u32 reserved_12_15;
u32 stp_sas_address[2];
u8 device_to_host_fis[20];
u32 reserved_44_47;
u32 affiliated_stp_initiator_sas_address[2];
};
struct smp_response_vendor_specific {
u8 response_bytes[SMP_REQUEST_VENDOR_SPECIFIC_MAX_LENGTH];
};
union smp_response_body {
struct smp_response_report_general report_general;
struct smp_response_report_manufacturer_information report_manufacturer_information;
struct smp_response_discover discover;
struct smp_response_report_phy_sata report_phy_sata;
struct smp_response_vendor_specific vendor_specific_response;
};
/**
* struct smp_response - This structure simply unionizes the existing response
* structures into a common response type.
*
*
*/
struct smp_response {
struct smp_response_header header;
union smp_response_body response;
};
/* SMP Request Functions */
#define SMP_FUNCTION_REPORT_GENERAL 0x00
#define SMP_FUNCTION_REPORT_MANUFACTURER_INFORMATION 0x01
#define SMP_FUNCTION_DISCOVER 0x10
#define SMP_FUNCTION_REPORT_PHY_ERROR_LOG 0x11
#define SMP_FUNCTION_REPORT_PHY_SATA 0x12
#define SMP_FUNCTION_REPORT_ROUTE_INFORMATION 0X13
#define SMP_FUNCTION_CONFIGURE_ROUTE_INFORMATION 0X90
#define SMP_FUNCTION_PHY_CONTROL 0x91
#define SMP_FUNCTION_PHY_TEST 0x92
#define SMP_FRAME_TYPE_REQUEST 0x40
#define SMP_FRAME_TYPE_RESPONSE 0x41
#define PHY_OPERATION_NOP 0x00
#define PHY_OPERATION_LINK_RESET 0x01
#define PHY_OPERATION_HARD_RESET 0x02
#define PHY_OPERATION_DISABLE 0x03
#define PHY_OPERATION_CLEAR_ERROR_LOG 0x05
#define PHY_OPERATION_CLEAR_AFFILIATION 0x06
#define NPLR_PHY_ENABLED_UNK_LINK_RATE 0x00
#define NPLR_PHY_DISABLED 0x01
#define NPLR_PHY_ENABLED_SPD_NEG_FAILED 0x02
#define NPLR_PHY_ENABLED_SATA_HOLD 0x03
#define NPLR_PHY_ENABLED_1_5G 0x08
#define NPLR_PHY_ENABLED_3_0G 0x09
/* SMP Function Result values. */
#define SMP_RESULT_FUNCTION_ACCEPTED 0x00
#define SMP_RESULT_UNKNOWN_FUNCTION 0x01
#define SMP_RESULT_FUNCTION_FAILED 0x02
#define SMP_RESULT_INVALID_REQUEST_FRAME_LEN 0x03
#define SMP_RESULT_INAVALID_EXPANDER_CHANGE_COUNT 0x04
#define SMP_RESULT_BUSY 0x05
#define SMP_RESULT_INCOMPLETE_DESCRIPTOR_LIST 0x06
#define SMP_RESULT_PHY_DOES_NOT_EXIST 0x10
#define SMP_RESULT_INDEX_DOES_NOT_EXIST 0x11
#define SMP_RESULT_PHY_DOES_NOT_SUPPORT_SATA 0x12
#define SMP_RESULT_UNKNOWN_PHY_OPERATION 0x13
#define SMP_RESULT_UNKNOWN_PHY_TEST_FUNCTION 0x14
#define SMP_RESULT_PHY_TEST_IN_PROGRESS 0x15
#define SMP_RESULT_PHY_VACANT 0x16
/* Attached Device Types */
#define SMP_NO_DEVICE_ATTACHED 0
#define SMP_END_DEVICE_ONLY 1
#define SMP_EDGE_EXPANDER_DEVICE 2
#define SMP_FANOUT_EXPANDER_DEVICE 3
/* Expander phy routine attribute */
#define DIRECT_ROUTING_ATTRIBUTE 0
#define SUBTRACTIVE_ROUTING_ATTRIBUTE 1
#define TABLE_ROUTING_ATTRIBUTE 2
#endif /* _INTEL_SAS_H_ */
Reference in a new issue View git blame Copy permalink