kernel-fxtec-pro1x/drivers/char/rio/cmdpkt.h
Adrian Bunk 59247ca2fd drivers/char/rio/: remove VCS tags
This patch removes ancient VCS tags (either protected
by #ifdef SCCS_LABELS or commented out).

Signed-off-by: Adrian Bunk <bunk@kernel.org>
Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-07-20 17:12:35 -07:00

177 lines
4.3 KiB
C

/*
** -----------------------------------------------------------------------------
**
** Perle Specialix driver for Linux
** Ported from existing RIO Driver for SCO sources.
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
** Module : cmdpkt.h
** SID : 1.2
** Last Modified : 11/6/98 11:34:09
** Retrieved : 11/6/98 11:34:20
**
** ident @(#)cmdpkt.h 1.2
**
** -----------------------------------------------------------------------------
*/
#ifndef __rio_cmdpkt_h__
#define __rio_cmdpkt_h__
/*
** overlays for the data area of a packet. Used in both directions
** (to build a packet to send, and to interpret a packet that arrives)
** and is very inconvenient for MIPS, so they appear as two separate
** structures - those used for modifying/reading packets on the card
** and those for modifying/reading packets in real memory, which have an _M
** suffix.
*/
#define RTA_BOOT_DATA_SIZE (PKT_MAX_DATA_LEN-2)
/*
** The boot information packet looks like this:
** This structure overlays a PktCmd->CmdData structure, and so starts
** at Data[2] in the actual pkt!
*/
struct BootSequence {
u16 NumPackets;
u16 LoadBase;
u16 CodeSize;
};
#define BOOT_SEQUENCE_LEN 8
struct SamTop {
u8 Unit;
u8 Link;
};
struct CmdHdr {
u8 PcCommand;
union {
u8 PcPhbNum;
u8 PcLinkNum;
u8 PcIDNum;
} U0;
};
struct PktCmd {
union {
struct {
struct CmdHdr CmdHdr;
struct BootSequence PcBootSequence;
} S1;
struct {
u16 PcSequence;
u8 PcBootData[RTA_BOOT_DATA_SIZE];
} S2;
struct {
u16 __crud__;
u8 PcUniqNum[4]; /* this is really a uint. */
u8 PcModuleTypes; /* what modules are fitted */
} S3;
struct {
struct CmdHdr CmdHdr;
u8 __undefined__;
u8 PcModemStatus;
u8 PcPortStatus;
u8 PcSubCommand; /* commands like mem or register dump */
u16 PcSubAddr; /* Address for command */
u8 PcSubData[64]; /* Date area for command */
} S4;
struct {
struct CmdHdr CmdHdr;
u8 PcCommandText[1];
u8 __crud__[20];
u8 PcIDNum2; /* It had to go somewhere! */
} S5;
struct {
struct CmdHdr CmdHdr;
struct SamTop Topology[LINKS_PER_UNIT];
} S6;
} U1;
};
struct PktCmd_M {
union {
struct {
struct {
u8 PcCommand;
union {
u8 PcPhbNum;
u8 PcLinkNum;
u8 PcIDNum;
} U0;
} CmdHdr;
struct {
u16 NumPackets;
u16 LoadBase;
u16 CodeSize;
} PcBootSequence;
} S1;
struct {
u16 PcSequence;
u8 PcBootData[RTA_BOOT_DATA_SIZE];
} S2;
struct {
u16 __crud__;
u8 PcUniqNum[4]; /* this is really a uint. */
u8 PcModuleTypes; /* what modules are fitted */
} S3;
struct {
u16 __cmd_hdr__;
u8 __undefined__;
u8 PcModemStatus;
u8 PcPortStatus;
u8 PcSubCommand;
u16 PcSubAddr;
u8 PcSubData[64];
} S4;
struct {
u16 __cmd_hdr__;
u8 PcCommandText[1];
u8 __crud__[20];
u8 PcIDNum2; /* Tacked on end */
} S5;
struct {
u16 __cmd_hdr__;
struct Top Topology[LINKS_PER_UNIT];
} S6;
} U1;
};
#define Command U1.S1.CmdHdr.PcCommand
#define PhbNum U1.S1.CmdHdr.U0.PcPhbNum
#define IDNum U1.S1.CmdHdr.U0.PcIDNum
#define IDNum2 U1.S5.PcIDNum2
#define LinkNum U1.S1.CmdHdr.U0.PcLinkNum
#define Sequence U1.S2.PcSequence
#define BootData U1.S2.PcBootData
#define BootSequence U1.S1.PcBootSequence
#define UniqNum U1.S3.PcUniqNum
#define ModemStatus U1.S4.PcModemStatus
#define PortStatus U1.S4.PcPortStatus
#define SubCommand U1.S4.PcSubCommand
#define SubAddr U1.S4.PcSubAddr
#define SubData U1.S4.PcSubData
#define CommandText U1.S5.PcCommandText
#define RouteTopology U1.S6.Topology
#define ModuleTypes U1.S3.PcModuleTypes
#endif