055388a318
Currently the size of the speculative preallocation during delayed allocation is fixed by either the allocsize mount option of a default size. We are seeing a lot of cases where we need to recommend using the allocsize mount option to prevent fragmentation when buffered writes land in the same AG. Rather than using a fixed preallocation size by default (up to 64k), make it dynamic by basing it on the current inode size. That way the EOF preallocation will increase as the file size increases. Hence for streaming writes we are much more likely to get large preallocations exactly when we need it to reduce fragementation. For default settings, the size of the initial extents is determined by the number of parallel writers and the amount of memory in the machine. For 4GB RAM and 4 concurrent 32GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..1048575]: 1048672..2097247 0 (1048672..2097247) 1048576 1: [1048576..2097151]: 5242976..6291551 0 (5242976..6291551) 1048576 2: [2097152..4194303]: 12583008..14680159 0 (12583008..14680159) 2097152 3: [4194304..8388607]: 25165920..29360223 0 (25165920..29360223) 4194304 4: [8388608..16777215]: 58720352..67108959 0 (58720352..67108959) 8388608 5: [16777216..33554423]: 117440584..134217791 0 (117440584..134217791) 16777208 6: [33554424..50331511]: 184549056..201326143 0 (184549056..201326143) 16777088 7: [50331512..67108599]: 251657408..268434495 0 (251657408..268434495) 16777088 and for 16 concurrent 16GB file writes: EXT: FILE-OFFSET BLOCK-RANGE AG AG-OFFSET TOTAL 0: [0..262143]: 2490472..2752615 0 (2490472..2752615) 262144 1: [262144..524287]: 6291560..6553703 0 (6291560..6553703) 262144 2: [524288..1048575]: 13631592..14155879 0 (13631592..14155879) 524288 3: [1048576..2097151]: 30408808..31457383 0 (30408808..31457383) 1048576 4: [2097152..4194303]: 52428904..54526055 0 (52428904..54526055) 2097152 5: [4194304..8388607]: 104857704..109052007 0 (104857704..109052007) 4194304 6: [8388608..16777215]: 209715304..218103911 0 (209715304..218103911) 8388608 7: [16777216..33554423]: 452984848..469762055 0 (452984848..469762055) 16777208 Because it is hard to take back specualtive preallocation, cases where there are large slow growing log files on a nearly full filesystem may cause premature ENOSPC. Hence as the filesystem nears full, the maximum dynamic prealloc size іs reduced according to this table (based on 4k block size): freespace max prealloc size >5% full extent (8GB) 4-5% 2GB (8GB >> 2) 3-4% 1GB (8GB >> 3) 2-3% 512MB (8GB >> 4) 1-2% 256MB (8GB >> 5) <1% 128MB (8GB >> 6) This should reduce the amount of space held in speculative preallocation for such cases. The allocsize mount option turns off the dynamic behaviour and fixes the prealloc size to whatever the mount option specifies. i.e. the behaviour is unchanged. Signed-off-by: Dave Chinner <dchinner@redhat.com>
743 lines
19 KiB
C
743 lines
19 KiB
C
/*
|
|
* Copyright (c) 2000-2006 Silicon Graphics, Inc.
|
|
* All Rights Reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it would be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write the Free Software Foundation,
|
|
* Inc., 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
|
|
*/
|
|
#include "xfs.h"
|
|
#include "xfs_fs.h"
|
|
#include "xfs_bit.h"
|
|
#include "xfs_log.h"
|
|
#include "xfs_inum.h"
|
|
#include "xfs_trans.h"
|
|
#include "xfs_sb.h"
|
|
#include "xfs_ag.h"
|
|
#include "xfs_alloc.h"
|
|
#include "xfs_quota.h"
|
|
#include "xfs_mount.h"
|
|
#include "xfs_bmap_btree.h"
|
|
#include "xfs_alloc_btree.h"
|
|
#include "xfs_ialloc_btree.h"
|
|
#include "xfs_dinode.h"
|
|
#include "xfs_inode.h"
|
|
#include "xfs_btree.h"
|
|
#include "xfs_bmap.h"
|
|
#include "xfs_rtalloc.h"
|
|
#include "xfs_error.h"
|
|
#include "xfs_itable.h"
|
|
#include "xfs_rw.h"
|
|
#include "xfs_attr.h"
|
|
#include "xfs_buf_item.h"
|
|
#include "xfs_trans_space.h"
|
|
#include "xfs_utils.h"
|
|
#include "xfs_iomap.h"
|
|
#include "xfs_trace.h"
|
|
|
|
|
|
#define XFS_WRITEIO_ALIGN(mp,off) (((off) >> mp->m_writeio_log) \
|
|
<< mp->m_writeio_log)
|
|
#define XFS_WRITE_IMAPS XFS_BMAP_MAX_NMAP
|
|
|
|
STATIC int
|
|
xfs_iomap_eof_align_last_fsb(
|
|
xfs_mount_t *mp,
|
|
xfs_inode_t *ip,
|
|
xfs_extlen_t extsize,
|
|
xfs_fileoff_t *last_fsb)
|
|
{
|
|
xfs_fileoff_t new_last_fsb = 0;
|
|
xfs_extlen_t align;
|
|
int eof, error;
|
|
|
|
if (XFS_IS_REALTIME_INODE(ip))
|
|
;
|
|
/*
|
|
* If mounted with the "-o swalloc" option, roundup the allocation
|
|
* request to a stripe width boundary if the file size is >=
|
|
* stripe width and we are allocating past the allocation eof.
|
|
*/
|
|
else if (mp->m_swidth && (mp->m_flags & XFS_MOUNT_SWALLOC) &&
|
|
(ip->i_size >= XFS_FSB_TO_B(mp, mp->m_swidth)))
|
|
new_last_fsb = roundup_64(*last_fsb, mp->m_swidth);
|
|
/*
|
|
* Roundup the allocation request to a stripe unit (m_dalign) boundary
|
|
* if the file size is >= stripe unit size, and we are allocating past
|
|
* the allocation eof.
|
|
*/
|
|
else if (mp->m_dalign && (ip->i_size >= XFS_FSB_TO_B(mp, mp->m_dalign)))
|
|
new_last_fsb = roundup_64(*last_fsb, mp->m_dalign);
|
|
|
|
/*
|
|
* Always round up the allocation request to an extent boundary
|
|
* (when file on a real-time subvolume or has di_extsize hint).
|
|
*/
|
|
if (extsize) {
|
|
if (new_last_fsb)
|
|
align = roundup_64(new_last_fsb, extsize);
|
|
else
|
|
align = extsize;
|
|
new_last_fsb = roundup_64(*last_fsb, align);
|
|
}
|
|
|
|
if (new_last_fsb) {
|
|
error = xfs_bmap_eof(ip, new_last_fsb, XFS_DATA_FORK, &eof);
|
|
if (error)
|
|
return error;
|
|
if (eof)
|
|
*last_fsb = new_last_fsb;
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
STATIC int
|
|
xfs_cmn_err_fsblock_zero(
|
|
xfs_inode_t *ip,
|
|
xfs_bmbt_irec_t *imap)
|
|
{
|
|
xfs_cmn_err(XFS_PTAG_FSBLOCK_ZERO, CE_ALERT, ip->i_mount,
|
|
"Access to block zero in inode %llu "
|
|
"start_block: %llx start_off: %llx "
|
|
"blkcnt: %llx extent-state: %x\n",
|
|
(unsigned long long)ip->i_ino,
|
|
(unsigned long long)imap->br_startblock,
|
|
(unsigned long long)imap->br_startoff,
|
|
(unsigned long long)imap->br_blockcount,
|
|
imap->br_state);
|
|
return EFSCORRUPTED;
|
|
}
|
|
|
|
int
|
|
xfs_iomap_write_direct(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *imap,
|
|
int nmaps)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb;
|
|
xfs_fileoff_t last_fsb;
|
|
xfs_filblks_t count_fsb, resaligned;
|
|
xfs_fsblock_t firstfsb;
|
|
xfs_extlen_t extsz, temp;
|
|
int nimaps;
|
|
int bmapi_flag;
|
|
int quota_flag;
|
|
int rt;
|
|
xfs_trans_t *tp;
|
|
xfs_bmap_free_t free_list;
|
|
uint qblocks, resblks, resrtextents;
|
|
int committed;
|
|
int error;
|
|
|
|
/*
|
|
* Make sure that the dquots are there. This doesn't hold
|
|
* the ilock across a disk read.
|
|
*/
|
|
error = xfs_qm_dqattach_locked(ip, 0);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
rt = XFS_IS_REALTIME_INODE(ip);
|
|
extsz = xfs_get_extsz_hint(ip);
|
|
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
last_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)(offset + count)));
|
|
if ((offset + count) > ip->i_size) {
|
|
error = xfs_iomap_eof_align_last_fsb(mp, ip, extsz, &last_fsb);
|
|
if (error)
|
|
goto error_out;
|
|
} else {
|
|
if (nmaps && (imap->br_startblock == HOLESTARTBLOCK))
|
|
last_fsb = MIN(last_fsb, (xfs_fileoff_t)
|
|
imap->br_blockcount +
|
|
imap->br_startoff);
|
|
}
|
|
count_fsb = last_fsb - offset_fsb;
|
|
ASSERT(count_fsb > 0);
|
|
|
|
resaligned = count_fsb;
|
|
if (unlikely(extsz)) {
|
|
if ((temp = do_mod(offset_fsb, extsz)))
|
|
resaligned += temp;
|
|
if ((temp = do_mod(resaligned, extsz)))
|
|
resaligned += extsz - temp;
|
|
}
|
|
|
|
if (unlikely(rt)) {
|
|
resrtextents = qblocks = resaligned;
|
|
resrtextents /= mp->m_sb.sb_rextsize;
|
|
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0);
|
|
quota_flag = XFS_QMOPT_RES_RTBLKS;
|
|
} else {
|
|
resrtextents = 0;
|
|
resblks = qblocks = XFS_DIOSTRAT_SPACE_RES(mp, resaligned);
|
|
quota_flag = XFS_QMOPT_RES_REGBLKS;
|
|
}
|
|
|
|
/*
|
|
* Allocate and setup the transaction
|
|
*/
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
tp = xfs_trans_alloc(mp, XFS_TRANS_DIOSTRAT);
|
|
error = xfs_trans_reserve(tp, resblks,
|
|
XFS_WRITE_LOG_RES(mp), resrtextents,
|
|
XFS_TRANS_PERM_LOG_RES,
|
|
XFS_WRITE_LOG_COUNT);
|
|
/*
|
|
* Check for running out of space, note: need lock to return
|
|
*/
|
|
if (error)
|
|
xfs_trans_cancel(tp, 0);
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
if (error)
|
|
goto error_out;
|
|
|
|
error = xfs_trans_reserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
|
|
if (error)
|
|
goto error1;
|
|
|
|
xfs_trans_ijoin(tp, ip);
|
|
|
|
bmapi_flag = XFS_BMAPI_WRITE;
|
|
if (offset < ip->i_size || extsz)
|
|
bmapi_flag |= XFS_BMAPI_PREALLOC;
|
|
|
|
/*
|
|
* Issue the xfs_bmapi() call to allocate the blocks.
|
|
*
|
|
* From this point onwards we overwrite the imap pointer that the
|
|
* caller gave to us.
|
|
*/
|
|
xfs_bmap_init(&free_list, &firstfsb);
|
|
nimaps = 1;
|
|
error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag,
|
|
&firstfsb, 0, imap, &nimaps, &free_list);
|
|
if (error)
|
|
goto error0;
|
|
|
|
/*
|
|
* Complete the transaction
|
|
*/
|
|
error = xfs_bmap_finish(&tp, &free_list, &committed);
|
|
if (error)
|
|
goto error0;
|
|
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
|
|
if (error)
|
|
goto error_out;
|
|
|
|
/*
|
|
* Copy any maps to caller's array and return any error.
|
|
*/
|
|
if (nimaps == 0) {
|
|
error = ENOSPC;
|
|
goto error_out;
|
|
}
|
|
|
|
if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip))) {
|
|
error = xfs_cmn_err_fsblock_zero(ip, imap);
|
|
goto error_out;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error0: /* Cancel bmap, unlock inode, unreserve quota blocks, cancel trans */
|
|
xfs_bmap_cancel(&free_list);
|
|
xfs_trans_unreserve_quota_nblks(tp, ip, qblocks, 0, quota_flag);
|
|
|
|
error1: /* Just cancel transaction */
|
|
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
|
|
|
|
error_out:
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
/*
|
|
* If the caller is doing a write at the end of the file, then extend the
|
|
* allocation out to the file system's write iosize. We clean up any extra
|
|
* space left over when the file is closed in xfs_inactive().
|
|
*
|
|
* If we find we already have delalloc preallocation beyond EOF, don't do more
|
|
* preallocation as it it not needed.
|
|
*/
|
|
STATIC int
|
|
xfs_iomap_eof_want_preallocate(
|
|
xfs_mount_t *mp,
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *imap,
|
|
int nimaps,
|
|
int *prealloc)
|
|
{
|
|
xfs_fileoff_t start_fsb;
|
|
xfs_filblks_t count_fsb;
|
|
xfs_fsblock_t firstblock;
|
|
int n, error, imaps;
|
|
int found_delalloc = 0;
|
|
|
|
*prealloc = 0;
|
|
if ((offset + count) <= ip->i_size)
|
|
return 0;
|
|
|
|
/*
|
|
* If there are any real blocks past eof, then don't
|
|
* do any speculative allocation.
|
|
*/
|
|
start_fsb = XFS_B_TO_FSBT(mp, ((xfs_ufsize_t)(offset + count - 1)));
|
|
count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)XFS_MAXIOFFSET(mp));
|
|
while (count_fsb > 0) {
|
|
imaps = nimaps;
|
|
firstblock = NULLFSBLOCK;
|
|
error = xfs_bmapi(NULL, ip, start_fsb, count_fsb, 0,
|
|
&firstblock, 0, imap, &imaps, NULL);
|
|
if (error)
|
|
return error;
|
|
for (n = 0; n < imaps; n++) {
|
|
if ((imap[n].br_startblock != HOLESTARTBLOCK) &&
|
|
(imap[n].br_startblock != DELAYSTARTBLOCK))
|
|
return 0;
|
|
start_fsb += imap[n].br_blockcount;
|
|
count_fsb -= imap[n].br_blockcount;
|
|
|
|
if (imap[n].br_startblock == DELAYSTARTBLOCK)
|
|
found_delalloc = 1;
|
|
}
|
|
}
|
|
if (!found_delalloc)
|
|
*prealloc = 1;
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* If we don't have a user specified preallocation size, dynamically increase
|
|
* the preallocation size as the size of the file grows. Cap the maximum size
|
|
* at a single extent or less if the filesystem is near full. The closer the
|
|
* filesystem is to full, the smaller the maximum prealocation.
|
|
*/
|
|
STATIC xfs_fsblock_t
|
|
xfs_iomap_prealloc_size(
|
|
struct xfs_mount *mp,
|
|
struct xfs_inode *ip)
|
|
{
|
|
xfs_fsblock_t alloc_blocks = 0;
|
|
|
|
if (!(mp->m_flags & XFS_MOUNT_DFLT_IOSIZE)) {
|
|
int shift = 0;
|
|
int64_t freesp;
|
|
|
|
alloc_blocks = XFS_B_TO_FSB(mp, ip->i_size);
|
|
alloc_blocks = XFS_FILEOFF_MIN(MAXEXTLEN,
|
|
rounddown_pow_of_two(alloc_blocks));
|
|
|
|
xfs_icsb_sync_counters(mp, XFS_ICSB_LAZY_COUNT);
|
|
freesp = mp->m_sb.sb_fdblocks;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_5_PCNT]) {
|
|
shift = 2;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_4_PCNT])
|
|
shift++;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_3_PCNT])
|
|
shift++;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_2_PCNT])
|
|
shift++;
|
|
if (freesp < mp->m_low_space[XFS_LOWSP_1_PCNT])
|
|
shift++;
|
|
}
|
|
if (shift)
|
|
alloc_blocks >>= shift;
|
|
}
|
|
|
|
if (alloc_blocks < mp->m_writeio_blocks)
|
|
alloc_blocks = mp->m_writeio_blocks;
|
|
|
|
return alloc_blocks;
|
|
}
|
|
|
|
int
|
|
xfs_iomap_write_delay(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *ret_imap)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb;
|
|
xfs_fileoff_t last_fsb;
|
|
xfs_off_t aligned_offset;
|
|
xfs_fileoff_t ioalign;
|
|
xfs_fsblock_t firstblock;
|
|
xfs_extlen_t extsz;
|
|
int nimaps;
|
|
xfs_bmbt_irec_t imap[XFS_WRITE_IMAPS];
|
|
int prealloc, flushed = 0;
|
|
int error;
|
|
|
|
ASSERT(xfs_isilocked(ip, XFS_ILOCK_EXCL));
|
|
|
|
/*
|
|
* Make sure that the dquots are there. This doesn't hold
|
|
* the ilock across a disk read.
|
|
*/
|
|
error = xfs_qm_dqattach_locked(ip, 0);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
extsz = xfs_get_extsz_hint(ip);
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
|
|
|
|
error = xfs_iomap_eof_want_preallocate(mp, ip, offset, count,
|
|
imap, XFS_WRITE_IMAPS, &prealloc);
|
|
if (error)
|
|
return error;
|
|
|
|
retry:
|
|
if (prealloc) {
|
|
xfs_fsblock_t alloc_blocks = xfs_iomap_prealloc_size(mp, ip);
|
|
|
|
aligned_offset = XFS_WRITEIO_ALIGN(mp, (offset + count - 1));
|
|
ioalign = XFS_B_TO_FSBT(mp, aligned_offset);
|
|
last_fsb = ioalign + alloc_blocks;
|
|
} else {
|
|
last_fsb = XFS_B_TO_FSB(mp, ((xfs_ufsize_t)(offset + count)));
|
|
}
|
|
|
|
if (prealloc || extsz) {
|
|
error = xfs_iomap_eof_align_last_fsb(mp, ip, extsz, &last_fsb);
|
|
if (error)
|
|
return error;
|
|
}
|
|
|
|
nimaps = XFS_WRITE_IMAPS;
|
|
firstblock = NULLFSBLOCK;
|
|
error = xfs_bmapi(NULL, ip, offset_fsb,
|
|
(xfs_filblks_t)(last_fsb - offset_fsb),
|
|
XFS_BMAPI_DELAY | XFS_BMAPI_WRITE |
|
|
XFS_BMAPI_ENTIRE, &firstblock, 1, imap,
|
|
&nimaps, NULL);
|
|
switch (error) {
|
|
case 0:
|
|
case ENOSPC:
|
|
case EDQUOT:
|
|
break;
|
|
default:
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
/*
|
|
* If bmapi returned us nothing, we got either ENOSPC or EDQUOT. For
|
|
* ENOSPC, * flush all other inodes with delalloc blocks to free up
|
|
* some of the excess reserved metadata space. For both cases, retry
|
|
* without EOF preallocation.
|
|
*/
|
|
if (nimaps == 0) {
|
|
trace_xfs_delalloc_enospc(ip, offset, count);
|
|
if (flushed)
|
|
return XFS_ERROR(error ? error : ENOSPC);
|
|
|
|
if (error == ENOSPC) {
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
xfs_flush_inodes(ip);
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
}
|
|
|
|
flushed = 1;
|
|
error = 0;
|
|
prealloc = 0;
|
|
goto retry;
|
|
}
|
|
|
|
if (!(imap[0].br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
return xfs_cmn_err_fsblock_zero(ip, &imap[0]);
|
|
|
|
*ret_imap = imap[0];
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Pass in a delayed allocate extent, convert it to real extents;
|
|
* return to the caller the extent we create which maps on top of
|
|
* the originating callers request.
|
|
*
|
|
* Called without a lock on the inode.
|
|
*
|
|
* We no longer bother to look at the incoming map - all we have to
|
|
* guarantee is that whatever we allocate fills the required range.
|
|
*/
|
|
int
|
|
xfs_iomap_write_allocate(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count,
|
|
xfs_bmbt_irec_t *imap)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb, last_block;
|
|
xfs_fileoff_t end_fsb, map_start_fsb;
|
|
xfs_fsblock_t first_block;
|
|
xfs_bmap_free_t free_list;
|
|
xfs_filblks_t count_fsb;
|
|
xfs_trans_t *tp;
|
|
int nimaps, committed;
|
|
int error = 0;
|
|
int nres;
|
|
|
|
/*
|
|
* Make sure that the dquots are there.
|
|
*/
|
|
error = xfs_qm_dqattach(ip, 0);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
count_fsb = imap->br_blockcount;
|
|
map_start_fsb = imap->br_startoff;
|
|
|
|
XFS_STATS_ADD(xs_xstrat_bytes, XFS_FSB_TO_B(mp, count_fsb));
|
|
|
|
while (count_fsb != 0) {
|
|
/*
|
|
* Set up a transaction with which to allocate the
|
|
* backing store for the file. Do allocations in a
|
|
* loop until we get some space in the range we are
|
|
* interested in. The other space that might be allocated
|
|
* is in the delayed allocation extent on which we sit
|
|
* but before our buffer starts.
|
|
*/
|
|
|
|
nimaps = 0;
|
|
while (nimaps == 0) {
|
|
tp = xfs_trans_alloc(mp, XFS_TRANS_STRAT_WRITE);
|
|
tp->t_flags |= XFS_TRANS_RESERVE;
|
|
nres = XFS_EXTENTADD_SPACE_RES(mp, XFS_DATA_FORK);
|
|
error = xfs_trans_reserve(tp, nres,
|
|
XFS_WRITE_LOG_RES(mp),
|
|
0, XFS_TRANS_PERM_LOG_RES,
|
|
XFS_WRITE_LOG_COUNT);
|
|
if (error) {
|
|
xfs_trans_cancel(tp, 0);
|
|
return XFS_ERROR(error);
|
|
}
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
xfs_trans_ijoin(tp, ip);
|
|
|
|
xfs_bmap_init(&free_list, &first_block);
|
|
|
|
/*
|
|
* it is possible that the extents have changed since
|
|
* we did the read call as we dropped the ilock for a
|
|
* while. We have to be careful about truncates or hole
|
|
* punchs here - we are not allowed to allocate
|
|
* non-delalloc blocks here.
|
|
*
|
|
* The only protection against truncation is the pages
|
|
* for the range we are being asked to convert are
|
|
* locked and hence a truncate will block on them
|
|
* first.
|
|
*
|
|
* As a result, if we go beyond the range we really
|
|
* need and hit an delalloc extent boundary followed by
|
|
* a hole while we have excess blocks in the map, we
|
|
* will fill the hole incorrectly and overrun the
|
|
* transaction reservation.
|
|
*
|
|
* Using a single map prevents this as we are forced to
|
|
* check each map we look for overlap with the desired
|
|
* range and abort as soon as we find it. Also, given
|
|
* that we only return a single map, having one beyond
|
|
* what we can return is probably a bit silly.
|
|
*
|
|
* We also need to check that we don't go beyond EOF;
|
|
* this is a truncate optimisation as a truncate sets
|
|
* the new file size before block on the pages we
|
|
* currently have locked under writeback. Because they
|
|
* are about to be tossed, we don't need to write them
|
|
* back....
|
|
*/
|
|
nimaps = 1;
|
|
end_fsb = XFS_B_TO_FSB(mp, ip->i_size);
|
|
error = xfs_bmap_last_offset(NULL, ip, &last_block,
|
|
XFS_DATA_FORK);
|
|
if (error)
|
|
goto trans_cancel;
|
|
|
|
last_block = XFS_FILEOFF_MAX(last_block, end_fsb);
|
|
if ((map_start_fsb + count_fsb) > last_block) {
|
|
count_fsb = last_block - map_start_fsb;
|
|
if (count_fsb == 0) {
|
|
error = EAGAIN;
|
|
goto trans_cancel;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Go get the actual blocks.
|
|
*
|
|
* From this point onwards we overwrite the imap
|
|
* pointer that the caller gave to us.
|
|
*/
|
|
error = xfs_bmapi(tp, ip, map_start_fsb, count_fsb,
|
|
XFS_BMAPI_WRITE, &first_block, 1,
|
|
imap, &nimaps, &free_list);
|
|
if (error)
|
|
goto trans_cancel;
|
|
|
|
error = xfs_bmap_finish(&tp, &free_list, &committed);
|
|
if (error)
|
|
goto trans_cancel;
|
|
|
|
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
|
|
if (error)
|
|
goto error0;
|
|
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
}
|
|
|
|
/*
|
|
* See if we were able to allocate an extent that
|
|
* covers at least part of the callers request
|
|
*/
|
|
if (!(imap->br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
return xfs_cmn_err_fsblock_zero(ip, imap);
|
|
|
|
if ((offset_fsb >= imap->br_startoff) &&
|
|
(offset_fsb < (imap->br_startoff +
|
|
imap->br_blockcount))) {
|
|
XFS_STATS_INC(xs_xstrat_quick);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* So far we have not mapped the requested part of the
|
|
* file, just surrounding data, try again.
|
|
*/
|
|
count_fsb -= imap->br_blockcount;
|
|
map_start_fsb = imap->br_startoff + imap->br_blockcount;
|
|
}
|
|
|
|
trans_cancel:
|
|
xfs_bmap_cancel(&free_list);
|
|
xfs_trans_cancel(tp, XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT);
|
|
error0:
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
int
|
|
xfs_iomap_write_unwritten(
|
|
xfs_inode_t *ip,
|
|
xfs_off_t offset,
|
|
size_t count)
|
|
{
|
|
xfs_mount_t *mp = ip->i_mount;
|
|
xfs_fileoff_t offset_fsb;
|
|
xfs_filblks_t count_fsb;
|
|
xfs_filblks_t numblks_fsb;
|
|
xfs_fsblock_t firstfsb;
|
|
int nimaps;
|
|
xfs_trans_t *tp;
|
|
xfs_bmbt_irec_t imap;
|
|
xfs_bmap_free_t free_list;
|
|
uint resblks;
|
|
int committed;
|
|
int error;
|
|
|
|
trace_xfs_unwritten_convert(ip, offset, count);
|
|
|
|
offset_fsb = XFS_B_TO_FSBT(mp, offset);
|
|
count_fsb = XFS_B_TO_FSB(mp, (xfs_ufsize_t)offset + count);
|
|
count_fsb = (xfs_filblks_t)(count_fsb - offset_fsb);
|
|
|
|
/*
|
|
* Reserve enough blocks in this transaction for two complete extent
|
|
* btree splits. We may be converting the middle part of an unwritten
|
|
* extent and in this case we will insert two new extents in the btree
|
|
* each of which could cause a full split.
|
|
*
|
|
* This reservation amount will be used in the first call to
|
|
* xfs_bmbt_split() to select an AG with enough space to satisfy the
|
|
* rest of the operation.
|
|
*/
|
|
resblks = XFS_DIOSTRAT_SPACE_RES(mp, 0) << 1;
|
|
|
|
do {
|
|
/*
|
|
* set up a transaction to convert the range of extents
|
|
* from unwritten to real. Do allocations in a loop until
|
|
* we have covered the range passed in.
|
|
*
|
|
* Note that we open code the transaction allocation here
|
|
* to pass KM_NOFS--we can't risk to recursing back into
|
|
* the filesystem here as we might be asked to write out
|
|
* the same inode that we complete here and might deadlock
|
|
* on the iolock.
|
|
*/
|
|
xfs_wait_for_freeze(mp, SB_FREEZE_TRANS);
|
|
tp = _xfs_trans_alloc(mp, XFS_TRANS_STRAT_WRITE, KM_NOFS);
|
|
tp->t_flags |= XFS_TRANS_RESERVE;
|
|
error = xfs_trans_reserve(tp, resblks,
|
|
XFS_WRITE_LOG_RES(mp), 0,
|
|
XFS_TRANS_PERM_LOG_RES,
|
|
XFS_WRITE_LOG_COUNT);
|
|
if (error) {
|
|
xfs_trans_cancel(tp, 0);
|
|
return XFS_ERROR(error);
|
|
}
|
|
|
|
xfs_ilock(ip, XFS_ILOCK_EXCL);
|
|
xfs_trans_ijoin(tp, ip);
|
|
|
|
/*
|
|
* Modify the unwritten extent state of the buffer.
|
|
*/
|
|
xfs_bmap_init(&free_list, &firstfsb);
|
|
nimaps = 1;
|
|
error = xfs_bmapi(tp, ip, offset_fsb, count_fsb,
|
|
XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb,
|
|
1, &imap, &nimaps, &free_list);
|
|
if (error)
|
|
goto error_on_bmapi_transaction;
|
|
|
|
error = xfs_bmap_finish(&(tp), &(free_list), &committed);
|
|
if (error)
|
|
goto error_on_bmapi_transaction;
|
|
|
|
error = xfs_trans_commit(tp, XFS_TRANS_RELEASE_LOG_RES);
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
if (error)
|
|
return XFS_ERROR(error);
|
|
|
|
if (!(imap.br_startblock || XFS_IS_REALTIME_INODE(ip)))
|
|
return xfs_cmn_err_fsblock_zero(ip, &imap);
|
|
|
|
if ((numblks_fsb = imap.br_blockcount) == 0) {
|
|
/*
|
|
* The numblks_fsb value should always get
|
|
* smaller, otherwise the loop is stuck.
|
|
*/
|
|
ASSERT(imap.br_blockcount);
|
|
break;
|
|
}
|
|
offset_fsb += numblks_fsb;
|
|
count_fsb -= numblks_fsb;
|
|
} while (count_fsb > 0);
|
|
|
|
return 0;
|
|
|
|
error_on_bmapi_transaction:
|
|
xfs_bmap_cancel(&free_list);
|
|
xfs_trans_cancel(tp, (XFS_TRANS_RELEASE_LOG_RES | XFS_TRANS_ABORT));
|
|
xfs_iunlock(ip, XFS_ILOCK_EXCL);
|
|
return XFS_ERROR(error);
|
|
}
|