kernel-fxtec-pro1x/drivers/usb/wusbcore/wa-rpipe.c
Anderson Lizardo b0a81328c2 wusb: fix bmRequestType for Abort RPipe request
WUSB 1.0 (Table 8-4) mentions that Abort RPipe requests must have bmRequestType
equal to 0x25, although current implementation sets bmRequestType to 0xa5. This
patch fixes this typo.

Signed-off-by: Anderson Lizardo <anderson.lizardo@indt.org.br>
Signed-off-by: David Vrabel <david.vrabel@csr.com>
2008-09-17 16:54:32 +01:00

562 lines
17 KiB
C

/*
* WUSB Wire Adapter
* rpipe management
*
* Copyright (C) 2005-2006 Intel Corporation
* Inaky Perez-Gonzalez <inaky.perez-gonzalez@intel.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License version
* 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA
* 02110-1301, USA.
*
*
* FIXME: docs
*
* RPIPE
*
* Targetted at different downstream endpoints
*
* Descriptor: use to config the remote pipe.
*
* The number of blocks could be dynamic (wBlocks in descriptor is
* 0)--need to schedule them then.
*
* Each bit in wa->rpipe_bm represents if an rpipe is being used or
* not. Rpipes are represented with a 'struct wa_rpipe' that is
* attached to the hcpriv member of a 'struct usb_host_endpoint'.
*
* When you need to xfer data to an endpoint, you get an rpipe for it
* with wa_ep_rpipe_get(), which gives you a reference to the rpipe
* and keeps a single one (the first one) with the endpoint. When you
* are done transferring, you drop that reference. At the end the
* rpipe is always allocated and bound to the endpoint. There it might
* be recycled when not used.
*
* Addresses:
*
* We use a 1:1 mapping mechanism between port address (0 based
* index, actually) and the address. The USB stack knows about this.
*
* USB Stack port number 4 (1 based)
* WUSB code port index 3 (0 based)
* USB Addresss 5 (2 based -- 0 is for default, 1 for root hub)
*
* Now, because we don't use the concept as default address exactly
* like the (wired) USB code does, we need to kind of skip it. So we
* never take addresses from the urb->pipe, but from the
* urb->dev->devnum, to make sure that we always have the right
* destination address.
*/
#include <linux/init.h>
#include <asm/atomic.h>
#include <linux/bitmap.h>
#include "wusbhc.h"
#include "wa-hc.h"
#define D_LOCAL 0
#include <linux/uwb/debug.h>
static int __rpipe_get_descr(struct wahc *wa,
struct usb_rpipe_descriptor *descr, u16 index)
{
ssize_t result;
struct device *dev = &wa->usb_iface->dev;
/* Get the RPIPE descriptor -- we cannot use the usb_get_descriptor()
* function because the arguments are different.
*/
d_printf(1, dev, "rpipe %u: get descr\n", index);
result = usb_control_msg(
wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
USB_REQ_GET_DESCRIPTOR,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_RPIPE,
USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
1000 /* FIXME: arbitrary */);
if (result < 0) {
dev_err(dev, "rpipe %u: get descriptor failed: %d\n",
index, (int)result);
goto error;
}
if (result < sizeof(*descr)) {
dev_err(dev, "rpipe %u: got short descriptor "
"(%zd vs %zd bytes needed)\n",
index, result, sizeof(*descr));
result = -EINVAL;
goto error;
}
result = 0;
error:
return result;
}
/*
*
* The descriptor is assumed to be properly initialized (ie: you got
* it through __rpipe_get_descr()).
*/
static int __rpipe_set_descr(struct wahc *wa,
struct usb_rpipe_descriptor *descr, u16 index)
{
ssize_t result;
struct device *dev = &wa->usb_iface->dev;
/* we cannot use the usb_get_descriptor() function because the
* arguments are different.
*/
d_printf(1, dev, "rpipe %u: set descr\n", index);
result = usb_control_msg(
wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
USB_REQ_SET_DESCRIPTOR,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
USB_DT_RPIPE<<8, index, descr, sizeof(*descr),
HZ / 10);
if (result < 0) {
dev_err(dev, "rpipe %u: set descriptor failed: %d\n",
index, (int)result);
goto error;
}
if (result < sizeof(*descr)) {
dev_err(dev, "rpipe %u: sent short descriptor "
"(%zd vs %zd bytes required)\n",
index, result, sizeof(*descr));
result = -EINVAL;
goto error;
}
result = 0;
error:
return result;
}
static void rpipe_init(struct wa_rpipe *rpipe)
{
kref_init(&rpipe->refcnt);
spin_lock_init(&rpipe->seg_lock);
INIT_LIST_HEAD(&rpipe->seg_list);
}
static unsigned rpipe_get_idx(struct wahc *wa, unsigned rpipe_idx)
{
unsigned long flags;
spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
rpipe_idx = find_next_zero_bit(wa->rpipe_bm, wa->rpipes, rpipe_idx);
if (rpipe_idx < wa->rpipes)
set_bit(rpipe_idx, wa->rpipe_bm);
spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
return rpipe_idx;
}
static void rpipe_put_idx(struct wahc *wa, unsigned rpipe_idx)
{
unsigned long flags;
spin_lock_irqsave(&wa->rpipe_bm_lock, flags);
clear_bit(rpipe_idx, wa->rpipe_bm);
spin_unlock_irqrestore(&wa->rpipe_bm_lock, flags);
}
void rpipe_destroy(struct kref *_rpipe)
{
struct wa_rpipe *rpipe = container_of(_rpipe, struct wa_rpipe, refcnt);
u8 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
d_fnstart(1, NULL, "(rpipe %p %u)\n", rpipe, index);
if (rpipe->ep)
rpipe->ep->hcpriv = NULL;
rpipe_put_idx(rpipe->wa, index);
wa_put(rpipe->wa);
kfree(rpipe);
d_fnend(1, NULL, "(rpipe %p %u)\n", rpipe, index);
}
EXPORT_SYMBOL_GPL(rpipe_destroy);
/*
* Locate an idle rpipe, create an structure for it and return it
*
* @wa is referenced and unlocked
* @crs enum rpipe_attr, required endpoint characteristics
*
* The rpipe can be used only sequentially (not in parallel).
*
* The rpipe is moved into the "ready" state.
*/
static int rpipe_get_idle(struct wa_rpipe **prpipe, struct wahc *wa, u8 crs,
gfp_t gfp)
{
int result;
unsigned rpipe_idx;
struct wa_rpipe *rpipe;
struct device *dev = &wa->usb_iface->dev;
d_fnstart(3, dev, "(wa %p crs 0x%02x)\n", wa, crs);
rpipe = kzalloc(sizeof(*rpipe), gfp);
if (rpipe == NULL)
return -ENOMEM;
rpipe_init(rpipe);
/* Look for an idle pipe */
for (rpipe_idx = 0; rpipe_idx < wa->rpipes; rpipe_idx++) {
rpipe_idx = rpipe_get_idx(wa, rpipe_idx);
if (rpipe_idx >= wa->rpipes) /* no more pipes :( */
break;
result = __rpipe_get_descr(wa, &rpipe->descr, rpipe_idx);
if (result < 0)
dev_err(dev, "Can't get descriptor for rpipe %u: %d\n",
rpipe_idx, result);
else if ((rpipe->descr.bmCharacteristics & crs) != 0)
goto found;
rpipe_put_idx(wa, rpipe_idx);
}
*prpipe = NULL;
kfree(rpipe);
d_fnend(3, dev, "(wa %p crs 0x%02x) = -ENXIO\n", wa, crs);
return -ENXIO;
found:
set_bit(rpipe_idx, wa->rpipe_bm);
rpipe->wa = wa_get(wa);
*prpipe = rpipe;
d_fnstart(3, dev, "(wa %p crs 0x%02x) = 0\n", wa, crs);
return 0;
}
static int __rpipe_reset(struct wahc *wa, unsigned index)
{
int result;
struct device *dev = &wa->usb_iface->dev;
d_printf(1, dev, "rpipe %u: reset\n", index);
result = usb_control_msg(
wa->usb_dev, usb_sndctrlpipe(wa->usb_dev, 0),
USB_REQ_RPIPE_RESET,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
0, index, NULL, 0, 1000 /* FIXME: arbitrary */);
if (result < 0)
dev_err(dev, "rpipe %u: reset failed: %d\n",
index, result);
return result;
}
/*
* Fake companion descriptor for ep0
*
* See WUSB1.0[7.4.4], most of this is zero for bulk/int/ctl
*/
static struct usb_wireless_ep_comp_descriptor epc0 = {
.bLength = sizeof(epc0),
.bDescriptorType = USB_DT_WIRELESS_ENDPOINT_COMP,
/* .bMaxBurst = 1, */
.bMaxSequence = 31,
};
/*
* Look for EP companion descriptor
*
* Get there, look for Inara in the endpoint's extra descriptors
*/
static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find(
struct device *dev, struct usb_host_endpoint *ep)
{
void *itr;
size_t itr_size;
struct usb_descriptor_header *hdr;
struct usb_wireless_ep_comp_descriptor *epcd;
d_fnstart(3, dev, "(ep %p)\n", ep);
if (ep->desc.bEndpointAddress == 0) {
epcd = &epc0;
goto out;
}
itr = ep->extra;
itr_size = ep->extralen;
epcd = NULL;
while (itr_size > 0) {
if (itr_size < sizeof(*hdr)) {
dev_err(dev, "HW Bug? ep 0x%02x: extra descriptors "
"at offset %zu: only %zu bytes left\n",
ep->desc.bEndpointAddress,
itr - (void *) ep->extra, itr_size);
break;
}
hdr = itr;
if (hdr->bDescriptorType == USB_DT_WIRELESS_ENDPOINT_COMP) {
epcd = itr;
break;
}
if (hdr->bLength > itr_size) {
dev_err(dev, "HW Bug? ep 0x%02x: extra descriptor "
"at offset %zu (type 0x%02x) "
"length %d but only %zu bytes left\n",
ep->desc.bEndpointAddress,
itr - (void *) ep->extra, hdr->bDescriptorType,
hdr->bLength, itr_size);
break;
}
itr += hdr->bLength;
itr_size -= hdr->bDescriptorType;
}
out:
d_fnend(3, dev, "(ep %p) = %p\n", ep, epcd);
return epcd;
}
/*
* Aim an rpipe to its device & endpoint destination
*
* Make sure we change the address to unauthenticathed if the device
* is WUSB and it is not authenticated.
*/
static int rpipe_aim(struct wa_rpipe *rpipe, struct wahc *wa,
struct usb_host_endpoint *ep, struct urb *urb, gfp_t gfp)
{
int result = -ENOMSG; /* better code for lack of companion? */
struct device *dev = &wa->usb_iface->dev;
struct usb_device *usb_dev = urb->dev;
struct usb_wireless_ep_comp_descriptor *epcd;
u8 unauth;
d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n",
rpipe, wa, ep, urb);
epcd = rpipe_epc_find(dev, ep);
if (epcd == NULL) {
dev_err(dev, "ep 0x%02x: can't find companion descriptor\n",
ep->desc.bEndpointAddress);
goto error;
}
unauth = usb_dev->wusb && !usb_dev->authenticated ? 0x80 : 0;
__rpipe_reset(wa, le16_to_cpu(rpipe->descr.wRPipeIndex));
atomic_set(&rpipe->segs_available, le16_to_cpu(rpipe->descr.wRequests));
/* FIXME: block allocation system; request with queuing and timeout */
/* FIXME: compute so seg_size > ep->maxpktsize */
rpipe->descr.wBlocks = cpu_to_le16(16); /* given */
/* ep0 maxpktsize is 0x200 (WUSB1.0[4.8.1]) */
rpipe->descr.wMaxPacketSize = cpu_to_le16(ep->desc.wMaxPacketSize);
rpipe->descr.bHSHubAddress = 0; /* reserved: zero */
rpipe->descr.bHSHubPort = wusb_port_no_to_idx(urb->dev->portnum);
/* FIXME: use maximum speed as supported or recommended by device */
rpipe->descr.bSpeed = usb_pipeendpoint(urb->pipe) == 0 ?
UWB_PHY_RATE_53 : UWB_PHY_RATE_200;
d_printf(2, dev, "addr %u (0x%02x) rpipe #%u ep# %u speed %d\n",
urb->dev->devnum, urb->dev->devnum | unauth,
le16_to_cpu(rpipe->descr.wRPipeIndex),
usb_pipeendpoint(urb->pipe), rpipe->descr.bSpeed);
/* see security.c:wusb_update_address() */
if (unlikely(urb->dev->devnum == 0x80))
rpipe->descr.bDeviceAddress = 0;
else
rpipe->descr.bDeviceAddress = urb->dev->devnum | unauth;
rpipe->descr.bEndpointAddress = ep->desc.bEndpointAddress;
/* FIXME: bDataSequence */
rpipe->descr.bDataSequence = 0;
/* FIXME: dwCurrentWindow */
rpipe->descr.dwCurrentWindow = cpu_to_le32(1);
/* FIXME: bMaxDataSequence */
rpipe->descr.bMaxDataSequence = epcd->bMaxSequence - 1;
rpipe->descr.bInterval = ep->desc.bInterval;
/* FIXME: bOverTheAirInterval */
rpipe->descr.bOverTheAirInterval = 0; /* 0 if not isoc */
/* FIXME: xmit power & preamble blah blah */
rpipe->descr.bmAttribute = ep->desc.bmAttributes & 0x03;
/* rpipe->descr.bmCharacteristics RO */
/* FIXME: bmRetryOptions */
rpipe->descr.bmRetryOptions = 15;
/* FIXME: use for assessing link quality? */
rpipe->descr.wNumTransactionErrors = 0;
result = __rpipe_set_descr(wa, &rpipe->descr,
le16_to_cpu(rpipe->descr.wRPipeIndex));
if (result < 0) {
dev_err(dev, "Cannot aim rpipe: %d\n", result);
goto error;
}
result = 0;
error:
d_fnend(3, dev, "(rpipe %p wa %p ep %p urb %p) = %d\n",
rpipe, wa, ep, urb, result);
return result;
}
/*
* Check an aimed rpipe to make sure it points to where we want
*
* We use bit 19 of the Linux USB pipe bitmap for unauth vs auth
* space; when it is like that, we or 0x80 to make an unauth address.
*/
static int rpipe_check_aim(const struct wa_rpipe *rpipe, const struct wahc *wa,
const struct usb_host_endpoint *ep,
const struct urb *urb, gfp_t gfp)
{
int result = 0; /* better code for lack of companion? */
struct device *dev = &wa->usb_iface->dev;
struct usb_device *usb_dev = urb->dev;
u8 unauth = (usb_dev->wusb && !usb_dev->authenticated) ? 0x80 : 0;
u8 portnum = wusb_port_no_to_idx(urb->dev->portnum);
d_fnstart(3, dev, "(rpipe %p wa %p ep %p, urb %p)\n",
rpipe, wa, ep, urb);
#define AIM_CHECK(rdf, val, text) \
do { \
if (rpipe->descr.rdf != (val)) { \
dev_err(dev, \
"rpipe aim discrepancy: " #rdf " " text "\n", \
rpipe->descr.rdf, (val)); \
result = -EINVAL; \
WARN_ON(1); \
} \
} while (0)
AIM_CHECK(wMaxPacketSize, cpu_to_le16(ep->desc.wMaxPacketSize),
"(%u vs %u)");
AIM_CHECK(bHSHubPort, portnum, "(%u vs %u)");
AIM_CHECK(bSpeed, usb_pipeendpoint(urb->pipe) == 0 ?
UWB_PHY_RATE_53 : UWB_PHY_RATE_200,
"(%u vs %u)");
AIM_CHECK(bDeviceAddress, urb->dev->devnum | unauth, "(%u vs %u)");
AIM_CHECK(bEndpointAddress, ep->desc.bEndpointAddress, "(%u vs %u)");
AIM_CHECK(bInterval, ep->desc.bInterval, "(%u vs %u)");
AIM_CHECK(bmAttribute, ep->desc.bmAttributes & 0x03, "(%u vs %u)");
#undef AIM_CHECK
return result;
}
#ifndef CONFIG_BUG
#define CONFIG_BUG 0
#endif
/*
* Make sure there is an rpipe allocated for an endpoint
*
* If already allocated, we just refcount it; if not, we get an
* idle one, aim it to the right location and take it.
*
* Attaches to ep->hcpriv and rpipe->ep to ep.
*/
int rpipe_get_by_ep(struct wahc *wa, struct usb_host_endpoint *ep,
struct urb *urb, gfp_t gfp)
{
int result = 0;
struct device *dev = &wa->usb_iface->dev;
struct wa_rpipe *rpipe;
u8 eptype;
d_fnstart(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb,
gfp);
mutex_lock(&wa->rpipe_mutex);
rpipe = ep->hcpriv;
if (rpipe != NULL) {
if (CONFIG_BUG == 1) {
result = rpipe_check_aim(rpipe, wa, ep, urb, gfp);
if (result < 0)
goto error;
}
__rpipe_get(rpipe);
d_printf(2, dev, "ep 0x%02x: reusing rpipe %u\n",
ep->desc.bEndpointAddress,
le16_to_cpu(rpipe->descr.wRPipeIndex));
} else {
/* hmm, assign idle rpipe, aim it */
result = -ENOBUFS;
eptype = ep->desc.bmAttributes & 0x03;
result = rpipe_get_idle(&rpipe, wa, 1 << eptype, gfp);
if (result < 0)
goto error;
result = rpipe_aim(rpipe, wa, ep, urb, gfp);
if (result < 0) {
rpipe_put(rpipe);
goto error;
}
ep->hcpriv = rpipe;
rpipe->ep = ep;
__rpipe_get(rpipe); /* for caching into ep->hcpriv */
d_printf(2, dev, "ep 0x%02x: using rpipe %u\n",
ep->desc.bEndpointAddress,
le16_to_cpu(rpipe->descr.wRPipeIndex));
}
d_dump(4, dev, &rpipe->descr, sizeof(rpipe->descr));
error:
mutex_unlock(&wa->rpipe_mutex);
d_fnend(3, dev, "(wa %p ep %p urb %p gfp 0x%08x)\n", wa, ep, urb, gfp);
return result;
}
/*
* Allocate the bitmap for each rpipe.
*/
int wa_rpipes_create(struct wahc *wa)
{
wa->rpipes = wa->wa_descr->wNumRPipes;
wa->rpipe_bm = kzalloc(BITS_TO_LONGS(wa->rpipes)*sizeof(unsigned long),
GFP_KERNEL);
if (wa->rpipe_bm == NULL)
return -ENOMEM;
return 0;
}
void wa_rpipes_destroy(struct wahc *wa)
{
struct device *dev = &wa->usb_iface->dev;
d_fnstart(3, dev, "(wa %p)\n", wa);
if (!bitmap_empty(wa->rpipe_bm, wa->rpipes)) {
char buf[256];
WARN_ON(1);
bitmap_scnprintf(buf, sizeof(buf), wa->rpipe_bm, wa->rpipes);
dev_err(dev, "BUG: pipes not released on exit: %s\n", buf);
}
kfree(wa->rpipe_bm);
d_fnend(3, dev, "(wa %p)\n", wa);
}
/*
* Release resources allocated for an endpoint
*
* If there is an associated rpipe to this endpoint, Abort any pending
* transfers and put it. If the rpipe ends up being destroyed,
* __rpipe_destroy() will cleanup ep->hcpriv.
*
* This is called before calling hcd->stop(), so you don't need to do
* anything else in there.
*/
void rpipe_ep_disable(struct wahc *wa, struct usb_host_endpoint *ep)
{
struct device *dev = &wa->usb_iface->dev;
struct wa_rpipe *rpipe;
d_fnstart(2, dev, "(wa %p ep %p)\n", wa, ep);
mutex_lock(&wa->rpipe_mutex);
rpipe = ep->hcpriv;
if (rpipe != NULL) {
unsigned rc = atomic_read(&rpipe->refcnt.refcount);
int result;
u16 index = le16_to_cpu(rpipe->descr.wRPipeIndex);
if (rc != 1)
d_printf(1, dev, "(wa %p ep %p) rpipe %p refcnt %u\n",
wa, ep, rpipe, rc);
d_printf(1, dev, "rpipe %u: abort\n", index);
result = usb_control_msg(
wa->usb_dev, usb_rcvctrlpipe(wa->usb_dev, 0),
USB_REQ_RPIPE_ABORT,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_RPIPE,
0, index, NULL, 0, 1000 /* FIXME: arbitrary */);
if (result < 0 && result != -ENODEV /* dev is gone */)
d_printf(1, dev, "(wa %p rpipe %u): abort failed: %d\n",
wa, index, result);
rpipe_put(rpipe);
}
mutex_unlock(&wa->rpipe_mutex);
d_fnend(2, dev, "(wa %p ep %p)\n", wa, ep);
return;
}
EXPORT_SYMBOL_GPL(rpipe_ep_disable);