kernel-fxtec-pro1x/arch/arm/mach-davinci/devices-tnetv107x.c
Manjunathappa, Prakash fcf7157ba3 ARM: davinci: serial: get rid of davinci_uart_config
"struct davinci_uart_config" was introduced to specify
UART ports brought out or enabled on the board. But
none of the boards use it for that purpose and we are
not going to add anymore board files, so remove the
structure.

Signed-off-by: Manjunathappa, Prakash <prakash.pm@ti.com>
Suggested-by: Sekhar Nori <nsekhar@ti.com>
[nsekhar@ti.com: split patch to remove davinci_serial_setup_clk()
		 changes.]
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-08-22 00:38:59 +05:30

434 lines
10 KiB
C

/*
* Texas Instruments TNETV107X SoC devices
*
* Copyright (C) 2010 Texas Instruments
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License as
* published by the Free Software Foundation version 2.
*
* This program is distributed "as is" WITHOUT ANY WARRANTY of any
* kind, whether express or implied; without even the implied warranty
* of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/dma-mapping.h>
#include <linux/clk.h>
#include <linux/slab.h>
#include <linux/platform_data/edma.h>
#include <mach/common.h>
#include <mach/irqs.h>
#include <mach/tnetv107x.h>
#include "clock.h"
/* Base addresses for on-chip devices */
#define TNETV107X_TPCC_BASE 0x01c00000
#define TNETV107X_TPTC0_BASE 0x01c10000
#define TNETV107X_TPTC1_BASE 0x01c10400
#define TNETV107X_WDOG_BASE 0x08086700
#define TNETV107X_TSC_BASE 0x08088500
#define TNETV107X_SDIO0_BASE 0x08088700
#define TNETV107X_SDIO1_BASE 0x08088800
#define TNETV107X_KEYPAD_BASE 0x08088a00
#define TNETV107X_SSP_BASE 0x08088c00
#define TNETV107X_ASYNC_EMIF_CNTRL_BASE 0x08200000
#define TNETV107X_ASYNC_EMIF_DATA_CE0_BASE 0x30000000
#define TNETV107X_ASYNC_EMIF_DATA_CE1_BASE 0x40000000
#define TNETV107X_ASYNC_EMIF_DATA_CE2_BASE 0x44000000
#define TNETV107X_ASYNC_EMIF_DATA_CE3_BASE 0x48000000
/* TNETV107X specific EDMA3 information */
#define EDMA_TNETV107X_NUM_DMACH 64
#define EDMA_TNETV107X_NUM_TCC 64
#define EDMA_TNETV107X_NUM_PARAMENTRY 128
#define EDMA_TNETV107X_NUM_EVQUE 2
#define EDMA_TNETV107X_NUM_TC 2
#define EDMA_TNETV107X_CHMAP_EXIST 0
#define EDMA_TNETV107X_NUM_REGIONS 4
#define TNETV107X_DMACH2EVENT_MAP0 0x3C0CE000u
#define TNETV107X_DMACH2EVENT_MAP1 0x000FFFFFu
#define TNETV107X_DMACH_SDIO0_RX 26
#define TNETV107X_DMACH_SDIO0_TX 27
#define TNETV107X_DMACH_SDIO1_RX 28
#define TNETV107X_DMACH_SDIO1_TX 29
static s8 edma_tc_mapping[][2] = {
/* event queue no TC no */
{ 0, 0 },
{ 1, 1 },
{ -1, -1 }
};
static s8 edma_priority_mapping[][2] = {
/* event queue no Prio */
{ 0, 3 },
{ 1, 7 },
{ -1, -1 }
};
static struct edma_soc_info edma_cc0_info = {
.n_channel = EDMA_TNETV107X_NUM_DMACH,
.n_region = EDMA_TNETV107X_NUM_REGIONS,
.n_slot = EDMA_TNETV107X_NUM_PARAMENTRY,
.n_tc = EDMA_TNETV107X_NUM_TC,
.n_cc = 1,
.queue_tc_mapping = edma_tc_mapping,
.queue_priority_mapping = edma_priority_mapping,
.default_queue = EVENTQ_1,
};
static struct edma_soc_info *tnetv107x_edma_info[EDMA_MAX_CC] = {
&edma_cc0_info,
};
static struct resource edma_resources[] = {
{
.name = "edma_cc0",
.start = TNETV107X_TPCC_BASE,
.end = TNETV107X_TPCC_BASE + SZ_32K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc0",
.start = TNETV107X_TPTC0_BASE,
.end = TNETV107X_TPTC0_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma_tc1",
.start = TNETV107X_TPTC1_BASE,
.end = TNETV107X_TPTC1_BASE + SZ_1K - 1,
.flags = IORESOURCE_MEM,
},
{
.name = "edma0",
.start = IRQ_TNETV107X_TPCC,
.flags = IORESOURCE_IRQ,
},
{
.name = "edma0_err",
.start = IRQ_TNETV107X_TPCC_ERR,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device edma_device = {
.name = "edma",
.id = -1,
.num_resources = ARRAY_SIZE(edma_resources),
.resource = edma_resources,
.dev.platform_data = tnetv107x_edma_info,
};
static struct plat_serial8250_port serial0_platform_data[] = {
{
.mapbase = TNETV107X_UART0_BASE,
.irq = IRQ_TNETV107X_UART0,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_FIXED_TYPE | UPF_IOREMAP,
.type = PORT_AR7,
.iotype = UPIO_MEM32,
.regshift = 2,
},
{
.flags = 0,
}
};
static struct plat_serial8250_port serial1_platform_data[] = {
{
.mapbase = TNETV107X_UART1_BASE,
.irq = IRQ_TNETV107X_UART1,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_FIXED_TYPE | UPF_IOREMAP,
.type = PORT_AR7,
.iotype = UPIO_MEM32,
.regshift = 2,
},
{
.flags = 0,
}
};
static struct plat_serial8250_port serial2_platform_data[] = {
{
.mapbase = TNETV107X_UART2_BASE,
.irq = IRQ_TNETV107X_UART2,
.flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
UPF_FIXED_TYPE | UPF_IOREMAP,
.type = PORT_AR7,
.iotype = UPIO_MEM32,
.regshift = 2,
},
{
.flags = 0,
}
};
struct platform_device tnetv107x_serial_device[] = {
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM,
.dev.platform_data = serial0_platform_data,
},
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM1,
.dev.platform_data = serial1_platform_data,
},
{
.name = "serial8250",
.id = PLAT8250_DEV_PLATFORM2,
.dev.platform_data = serial2_platform_data,
},
{
}
};
static struct resource mmc0_resources[] = {
{ /* Memory mapped registers */
.start = TNETV107X_SDIO0_BASE,
.end = TNETV107X_SDIO0_BASE + 0x0ff,
.flags = IORESOURCE_MEM
},
{ /* MMC interrupt */
.start = IRQ_TNETV107X_MMC0,
.flags = IORESOURCE_IRQ
},
{ /* SDIO interrupt */
.start = IRQ_TNETV107X_SDIO0,
.flags = IORESOURCE_IRQ
},
{ /* DMA RX */
.start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_RX),
.flags = IORESOURCE_DMA
},
{ /* DMA TX */
.start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO0_TX),
.flags = IORESOURCE_DMA
},
};
static struct resource mmc1_resources[] = {
{ /* Memory mapped registers */
.start = TNETV107X_SDIO1_BASE,
.end = TNETV107X_SDIO1_BASE + 0x0ff,
.flags = IORESOURCE_MEM
},
{ /* MMC interrupt */
.start = IRQ_TNETV107X_MMC1,
.flags = IORESOURCE_IRQ
},
{ /* SDIO interrupt */
.start = IRQ_TNETV107X_SDIO1,
.flags = IORESOURCE_IRQ
},
{ /* DMA RX */
.start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_RX),
.flags = IORESOURCE_DMA
},
{ /* DMA TX */
.start = EDMA_CTLR_CHAN(0, TNETV107X_DMACH_SDIO1_TX),
.flags = IORESOURCE_DMA
},
};
static u64 mmc0_dma_mask = DMA_BIT_MASK(32);
static u64 mmc1_dma_mask = DMA_BIT_MASK(32);
static struct platform_device mmc_devices[2] = {
{
.name = "dm6441-mmc",
.id = 0,
.dev = {
.dma_mask = &mmc0_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(mmc0_resources),
.resource = mmc0_resources
},
{
.name = "dm6441-mmc",
.id = 1,
.dev = {
.dma_mask = &mmc1_dma_mask,
.coherent_dma_mask = DMA_BIT_MASK(32),
},
.num_resources = ARRAY_SIZE(mmc1_resources),
.resource = mmc1_resources
},
};
static const u32 emif_windows[] = {
TNETV107X_ASYNC_EMIF_DATA_CE0_BASE, TNETV107X_ASYNC_EMIF_DATA_CE1_BASE,
TNETV107X_ASYNC_EMIF_DATA_CE2_BASE, TNETV107X_ASYNC_EMIF_DATA_CE3_BASE,
};
static const u32 emif_window_sizes[] = { SZ_256M, SZ_64M, SZ_64M, SZ_64M };
static struct resource wdt_resources[] = {
{
.start = TNETV107X_WDOG_BASE,
.end = TNETV107X_WDOG_BASE + SZ_4K - 1,
.flags = IORESOURCE_MEM,
},
};
struct platform_device tnetv107x_wdt_device = {
.name = "tnetv107x_wdt",
.id = 0,
.num_resources = ARRAY_SIZE(wdt_resources),
.resource = wdt_resources,
};
static int __init nand_init(int chipsel, struct davinci_nand_pdata *data)
{
struct resource res[2];
struct platform_device *pdev;
u32 range;
int ret;
/* Figure out the resource range from the ale/cle masks */
range = max(data->mask_cle, data->mask_ale);
range = PAGE_ALIGN(range + 4) - 1;
if (range >= emif_window_sizes[chipsel])
return -EINVAL;
pdev = kzalloc(sizeof(*pdev), GFP_KERNEL);
if (!pdev)
return -ENOMEM;
pdev->name = "davinci_nand";
pdev->id = chipsel;
pdev->dev.platform_data = data;
memset(res, 0, sizeof(res));
res[0].start = emif_windows[chipsel];
res[0].end = res[0].start + range;
res[0].flags = IORESOURCE_MEM;
res[1].start = TNETV107X_ASYNC_EMIF_CNTRL_BASE;
res[1].end = res[1].start + SZ_4K - 1;
res[1].flags = IORESOURCE_MEM;
ret = platform_device_add_resources(pdev, res, ARRAY_SIZE(res));
if (ret < 0) {
kfree(pdev);
return ret;
}
return platform_device_register(pdev);
}
static struct resource keypad_resources[] = {
{
.start = TNETV107X_KEYPAD_BASE,
.end = TNETV107X_KEYPAD_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_TNETV107X_KEYPAD,
.flags = IORESOURCE_IRQ,
.name = "press",
},
{
.start = IRQ_TNETV107X_KEYPAD_FREE,
.flags = IORESOURCE_IRQ,
.name = "release",
},
};
static struct platform_device keypad_device = {
.name = "tnetv107x-keypad",
.num_resources = ARRAY_SIZE(keypad_resources),
.resource = keypad_resources,
};
static struct resource tsc_resources[] = {
{
.start = TNETV107X_TSC_BASE,
.end = TNETV107X_TSC_BASE + 0xff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_TNETV107X_TSC,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device tsc_device = {
.name = "tnetv107x-ts",
.num_resources = ARRAY_SIZE(tsc_resources),
.resource = tsc_resources,
};
static struct resource ssp_resources[] = {
{
.start = TNETV107X_SSP_BASE,
.end = TNETV107X_SSP_BASE + 0x1ff,
.flags = IORESOURCE_MEM,
},
{
.start = IRQ_TNETV107X_SSP,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device ssp_device = {
.name = "ti-ssp",
.id = -1,
.num_resources = ARRAY_SIZE(ssp_resources),
.resource = ssp_resources,
};
void __init tnetv107x_devices_init(struct tnetv107x_device_info *info)
{
int i, error;
struct clk *tsc_clk;
/*
* The reset defaults for tnetv107x tsc clock divider is set too high.
* This forces the clock down to a range that allows the ADC to
* complete sample conversion in time.
*/
tsc_clk = clk_get(NULL, "sys_tsc_clk");
if (!IS_ERR(tsc_clk)) {
error = clk_set_rate(tsc_clk, 5000000);
WARN_ON(error < 0);
clk_put(tsc_clk);
}
platform_device_register(&edma_device);
platform_device_register(&tnetv107x_wdt_device);
platform_device_register(&tsc_device);
if (info->serial_config)
davinci_serial_init(tnetv107x_serial_device);
for (i = 0; i < 2; i++)
if (info->mmc_config[i]) {
mmc_devices[i].dev.platform_data = info->mmc_config[i];
platform_device_register(&mmc_devices[i]);
}
for (i = 0; i < 4; i++)
if (info->nand_config[i])
nand_init(i, info->nand_config[i]);
if (info->keypad_config) {
keypad_device.dev.platform_data = info->keypad_config;
platform_device_register(&keypad_device);
}
if (info->ssp_config) {
ssp_device.dev.platform_data = info->ssp_config;
platform_device_register(&ssp_device);
}
}