kernel-fxtec-pro1x/arch/mn10300/kernel/irq.c
David Howells b920de1b77 mn10300: add the MN10300/AM33 architecture to the kernel
Add architecture support for the MN10300/AM33 CPUs produced by MEI to the
kernel.

This patch also adds board support for the ASB2303 with the ASB2308 daughter
board, and the ASB2305.  The only processor supported is the MN103E010, which
is an AM33v2 core plus on-chip devices.

[akpm@linux-foundation.org: nuke cvs control strings]
Signed-off-by: Masakazu Urade <urade.masakazu@jp.panasonic.com>
Signed-off-by: Koichi Yasutake <yasutake.koichi@jp.panasonic.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
2008-02-08 09:22:30 -08:00

235 lines
5.3 KiB
C

/* MN10300 Arch-specific interrupt handling
*
* Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
* Written by David Howells (dhowells@redhat.com)
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public Licence
* as published by the Free Software Foundation; either version
* 2 of the Licence, or (at your option) any later version.
*/
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/kernel_stat.h>
#include <linux/seq_file.h>
#include <asm/setup.h>
unsigned long __mn10300_irq_enabled_epsw = EPSW_IE | EPSW_IM_7;
EXPORT_SYMBOL(__mn10300_irq_enabled_epsw);
atomic_t irq_err_count;
/*
* MN10300 INTC controller operations
*/
static void mn10300_cpupic_disable(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
tmp = GxICR(irq);
}
static void mn10300_cpupic_enable(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
tmp = GxICR(irq);
}
static void mn10300_cpupic_ack(unsigned int irq)
{
u16 tmp;
*(volatile u8 *) &GxICR(irq) = GxICR_DETECT;
tmp = GxICR(irq);
}
static void mn10300_cpupic_mask(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL);
tmp = GxICR(irq);
}
static void mn10300_cpupic_mask_ack(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_DETECT;
tmp = GxICR(irq);
}
static void mn10300_cpupic_unmask(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE | GxICR_DETECT;
tmp = GxICR(irq);
}
static void mn10300_cpupic_end(unsigned int irq)
{
u16 tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_LEVEL) | GxICR_ENABLE;
tmp = GxICR(irq);
}
static struct irq_chip mn10300_cpu_pic = {
.name = "cpu",
.disable = mn10300_cpupic_disable,
.enable = mn10300_cpupic_enable,
.ack = mn10300_cpupic_ack,
.mask = mn10300_cpupic_mask,
.mask_ack = mn10300_cpupic_mask_ack,
.unmask = mn10300_cpupic_unmask,
.end = mn10300_cpupic_end,
};
/*
* 'what should we do if we get a hw irq event on an illegal vector'.
* each architecture has to answer this themselves.
*/
void ack_bad_irq(int irq)
{
printk(KERN_WARNING "unexpected IRQ trap at vector %02x\n", irq);
}
/*
* change the level at which an IRQ executes
* - must not be called whilst interrupts are being processed!
*/
void set_intr_level(int irq, u16 level)
{
u16 tmp;
if (in_interrupt())
BUG();
tmp = GxICR(irq);
GxICR(irq) = (tmp & GxICR_ENABLE) | level;
tmp = GxICR(irq);
}
/*
* mark an interrupt to be ACK'd after interrupt handlers have been run rather
* than before
* - see Documentation/mn10300/features.txt
*/
void set_intr_postackable(int irq)
{
set_irq_handler(irq, handle_level_irq);
}
/*
* initialise the interrupt system
*/
void __init init_IRQ(void)
{
int irq;
for (irq = 0; irq < NR_IRQS; irq++)
if (irq_desc[irq].chip == &no_irq_type)
set_irq_chip_and_handler(irq, &mn10300_cpu_pic,
handle_edge_irq);
unit_init_IRQ();
}
/*
* handle normal device IRQs
*/
asmlinkage void do_IRQ(void)
{
unsigned long sp, epsw, irq_disabled_epsw, old_irq_enabled_epsw;
int irq;
sp = current_stack_pointer();
if (sp - (sp & ~(THREAD_SIZE - 1)) < STACK_WARN)
BUG();
/* make sure local_irq_enable() doesn't muck up the interrupt priority
* setting in EPSW */
old_irq_enabled_epsw = __mn10300_irq_enabled_epsw;
local_save_flags(epsw);
__mn10300_irq_enabled_epsw = EPSW_IE | (EPSW_IM & epsw);
irq_disabled_epsw = EPSW_IE | MN10300_CLI_LEVEL;
__IRQ_STAT(smp_processor_id(), __irq_count)++;
irq_enter();
for (;;) {
/* ask the interrupt controller for the next IRQ to process
* - the result we get depends on EPSW.IM
*/
irq = IAGR & IAGR_GN;
if (!irq)
break;
local_irq_restore(irq_disabled_epsw);
generic_handle_irq(irq >> 2);
/* restore IRQ controls for IAGR access */
local_irq_restore(epsw);
}
__mn10300_irq_enabled_epsw = old_irq_enabled_epsw;
irq_exit();
}
/*
* Display interrupt management information through /proc/interrupts
*/
int show_interrupts(struct seq_file *p, void *v)
{
int i = *(loff_t *) v, j, cpu;
struct irqaction *action;
unsigned long flags;
switch (i) {
/* display column title bar naming CPUs */
case 0:
seq_printf(p, " ");
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "CPU%d ", j);
seq_putc(p, '\n');
break;
/* display information rows, one per active CPU */
case 1 ... NR_IRQS - 1:
spin_lock_irqsave(&irq_desc[i].lock, flags);
action = irq_desc[i].action;
if (action) {
seq_printf(p, "%3d: ", i);
for_each_present_cpu(cpu)
seq_printf(p, "%10u ", kstat_cpu(cpu).irqs[i]);
seq_printf(p, " %14s.%u", irq_desc[i].chip->name,
(GxICR(i) & GxICR_LEVEL) >>
GxICR_LEVEL_SHIFT);
seq_printf(p, " %s", action->name);
for (action = action->next;
action;
action = action->next)
seq_printf(p, ", %s", action->name);
seq_putc(p, '\n');
}
spin_unlock_irqrestore(&irq_desc[i].lock, flags);
break;
/* polish off with NMI and error counters */
case NR_IRQS:
seq_printf(p, "NMI: ");
for (j = 0; j < NR_CPUS; j++)
if (cpu_online(j))
seq_printf(p, "%10u ", nmi_count(j));
seq_putc(p, '\n');
seq_printf(p, "ERR: %10u\n", atomic_read(&irq_err_count));
break;
}
return 0;
}