8d813941b1
This gets the FEC ethernet driver working again on the lite5200 platform. The FEC driver is also compatible with the MPC5200, not only with the MPC5200B, so this adds a suitable entry to the driver's match list. Furthermore this adds the settings for the PHY in the dts file for the Lite5200. Note, that this is not exactly the same as in the Lite5200B, because the PHY is located at f0003000:01 for the 5200, and at :00 for the 5200B. This was tested on a Lite5200 and a Lite5200B, both booted a kernel via tftp and mounted the root via nfs successfully. Signed-off-by: René Bürgel <r.buergel@unicontrol.de> Acked-by: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: Paul Mackerras <paulus@samba.org>
333 lines
7.7 KiB
Text
333 lines
7.7 KiB
Text
/*
|
|
* Lite5200 board Device Tree Source
|
|
*
|
|
* Copyright 2006-2007 Secret Lab Technologies Ltd.
|
|
* Grant Likely <grant.likely@secretlab.ca>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
/ {
|
|
model = "fsl,lite5200";
|
|
compatible = "fsl,lite5200";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,5200@0 {
|
|
device_type = "cpu";
|
|
reg = <0>;
|
|
d-cache-line-size = <20>;
|
|
i-cache-line-size = <20>;
|
|
d-cache-size = <4000>; // L1, 16K
|
|
i-cache-size = <4000>; // L1, 16K
|
|
timebase-frequency = <0>; // from bootloader
|
|
bus-frequency = <0>; // from bootloader
|
|
clock-frequency = <0>; // from bootloader
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <00000000 04000000>; // 64MB
|
|
};
|
|
|
|
soc5200@f0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc5200-immr";
|
|
ranges = <0 f0000000 0000c000>;
|
|
reg = <f0000000 00000100>;
|
|
bus-frequency = <0>; // from bootloader
|
|
system-frequency = <0>; // from bootloader
|
|
|
|
cdm@200 {
|
|
compatible = "fsl,mpc5200-cdm";
|
|
reg = <200 38>;
|
|
};
|
|
|
|
mpc5200_pic: interrupt-controller@500 {
|
|
// 5200 interrupts are encoded into two levels;
|
|
interrupt-controller;
|
|
#interrupt-cells = <3>;
|
|
device_type = "interrupt-controller";
|
|
compatible = "fsl,mpc5200-pic";
|
|
reg = <500 80>;
|
|
};
|
|
|
|
timer@600 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <0>;
|
|
reg = <600 10>;
|
|
interrupts = <1 9 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl,has-wdt;
|
|
};
|
|
|
|
timer@610 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <1>;
|
|
reg = <610 10>;
|
|
interrupts = <1 a 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@620 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <2>;
|
|
reg = <620 10>;
|
|
interrupts = <1 b 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@630 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <3>;
|
|
reg = <630 10>;
|
|
interrupts = <1 c 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@640 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <4>;
|
|
reg = <640 10>;
|
|
interrupts = <1 d 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@650 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <5>;
|
|
reg = <650 10>;
|
|
interrupts = <1 e 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@660 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <6>;
|
|
reg = <660 10>;
|
|
interrupts = <1 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
timer@670 { // General Purpose Timer
|
|
compatible = "fsl,mpc5200-gpt";
|
|
cell-index = <7>;
|
|
reg = <670 10>;
|
|
interrupts = <1 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
rtc@800 { // Real time clock
|
|
compatible = "fsl,mpc5200-rtc";
|
|
device_type = "rtc";
|
|
reg = <800 100>;
|
|
interrupts = <1 5 0 1 6 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
can@900 {
|
|
compatible = "fsl,mpc5200-mscan";
|
|
cell-index = <0>;
|
|
interrupts = <2 11 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
reg = <900 80>;
|
|
};
|
|
|
|
can@980 {
|
|
compatible = "fsl,mpc5200-mscan";
|
|
cell-index = <1>;
|
|
interrupts = <2 12 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
reg = <980 80>;
|
|
};
|
|
|
|
gpio@b00 {
|
|
compatible = "fsl,mpc5200-gpio";
|
|
reg = <b00 40>;
|
|
interrupts = <1 7 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
gpio@c00 {
|
|
compatible = "fsl,mpc5200-gpio-wkup";
|
|
reg = <c00 40>;
|
|
interrupts = <1 8 0 0 3 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
spi@f00 {
|
|
compatible = "fsl,mpc5200-spi";
|
|
reg = <f00 20>;
|
|
interrupts = <2 d 0 2 e 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
usb@1000 {
|
|
compatible = "fsl,mpc5200-ohci","ohci-be";
|
|
reg = <1000 ff>;
|
|
interrupts = <2 6 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
dma-controller@1200 {
|
|
device_type = "dma-controller";
|
|
compatible = "fsl,mpc5200-bestcomm";
|
|
reg = <1200 80>;
|
|
interrupts = <3 0 0 3 1 0 3 2 0 3 3 0
|
|
3 4 0 3 5 0 3 6 0 3 7 0
|
|
3 8 0 3 9 0 3 a 0 3 b 0
|
|
3 c 0 3 d 0 3 e 0 3 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
xlb@1f00 {
|
|
compatible = "fsl,mpc5200-xlb";
|
|
reg = <1f00 100>;
|
|
};
|
|
|
|
serial@2000 { // PSC1
|
|
device_type = "serial";
|
|
compatible = "fsl,mpc5200-psc-uart";
|
|
port-number = <0>; // Logical port assignment
|
|
cell-index = <0>;
|
|
reg = <2000 100>;
|
|
interrupts = <2 1 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
// PSC2 in ac97 mode example
|
|
//ac97@2200 { // PSC2
|
|
// compatible = "fsl,mpc5200-psc-ac97";
|
|
// cell-index = <1>;
|
|
// reg = <2200 100>;
|
|
// interrupts = <2 2 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC3 in CODEC mode example
|
|
//i2s@2400 { // PSC3
|
|
// compatible = "fsl,mpc5200-psc-i2s";
|
|
// cell-index = <2>;
|
|
// reg = <2400 100>;
|
|
// interrupts = <2 3 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC4 in uart mode example
|
|
//serial@2600 { // PSC4
|
|
// device_type = "serial";
|
|
// compatible = "fsl,mpc5200-psc-uart";
|
|
// cell-index = <3>;
|
|
// reg = <2600 100>;
|
|
// interrupts = <2 b 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC5 in uart mode example
|
|
//serial@2800 { // PSC5
|
|
// device_type = "serial";
|
|
// compatible = "fsl,mpc5200-psc-uart";
|
|
// cell-index = <4>;
|
|
// reg = <2800 100>;
|
|
// interrupts = <2 c 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
// PSC6 in spi mode example
|
|
//spi@2c00 { // PSC6
|
|
// compatible = "fsl,mpc5200-psc-spi";
|
|
// cell-index = <5>;
|
|
// reg = <2c00 100>;
|
|
// interrupts = <2 4 0>;
|
|
// interrupt-parent = <&mpc5200_pic>;
|
|
//};
|
|
|
|
ethernet@3000 {
|
|
device_type = "network";
|
|
compatible = "fsl,mpc5200-fec";
|
|
reg = <3000 800>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
interrupts = <2 5 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
phy-handle = <&phy0>;
|
|
};
|
|
|
|
mdio@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200-mdio";
|
|
reg = <3000 400>; // fec range, since we need to setup fec interrupts
|
|
interrupts = <2 5 0>; // these are for "mii command finished", not link changes & co.
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
|
|
phy0:ethernet-phy@1 {
|
|
device_type = "ethernet-phy";
|
|
reg = <1>;
|
|
};
|
|
};
|
|
|
|
ata@3a00 {
|
|
device_type = "ata";
|
|
compatible = "fsl,mpc5200-ata";
|
|
reg = <3a00 100>;
|
|
interrupts = <2 7 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
};
|
|
|
|
i2c@3d00 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200-i2c","fsl-i2c";
|
|
cell-index = <0>;
|
|
reg = <3d00 40>;
|
|
interrupts = <2 f 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl5200-clocking;
|
|
};
|
|
|
|
i2c@3d40 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
compatible = "fsl,mpc5200-i2c","fsl-i2c";
|
|
cell-index = <1>;
|
|
reg = <3d40 40>;
|
|
interrupts = <2 10 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
fsl5200-clocking;
|
|
};
|
|
sram@8000 {
|
|
compatible = "fsl,mpc5200-sram","sram";
|
|
reg = <8000 4000>;
|
|
};
|
|
};
|
|
|
|
pci@f0000d00 {
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
device_type = "pci";
|
|
compatible = "fsl,mpc5200-pci";
|
|
reg = <f0000d00 100>;
|
|
interrupt-map-mask = <f800 0 0 7>;
|
|
interrupt-map = <c000 0 0 1 &mpc5200_pic 0 0 3
|
|
c000 0 0 2 &mpc5200_pic 0 0 3
|
|
c000 0 0 3 &mpc5200_pic 0 0 3
|
|
c000 0 0 4 &mpc5200_pic 0 0 3>;
|
|
clock-frequency = <0>; // From boot loader
|
|
interrupts = <2 8 0 2 9 0 2 a 0>;
|
|
interrupt-parent = <&mpc5200_pic>;
|
|
bus-range = <0 0>;
|
|
ranges = <42000000 0 80000000 80000000 0 20000000
|
|
02000000 0 a0000000 a0000000 0 10000000
|
|
01000000 0 00000000 b0000000 0 01000000>;
|
|
};
|
|
};
|