kernel-fxtec-pro1x/sound/soc/codecs/tpa6130a2.c
Peter Ujfalusi 39646871a4 ASoC: tpa6130a2: Replace DAPM code with direct interface
The use of DAPM widgets, and extra routing can cause ordering
problems in the system.
Machine drivers should use the exported direct interface with
SND_SOC_DAPM_HP's event callback to manage the state of the
amplifier.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@nokia.com>
Acked-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Liam Girdwood <lrg@slimlogic.co.uk>
2010-12-02 11:50:07 +00:00

504 lines
12 KiB
C

/*
* ALSA SoC Texas Instruments TPA6130A2 headset stereo amplifier driver
*
* Copyright (C) Nokia Corporation
*
* Author: Peter Ujfalusi <peter.ujfalusi@nokia.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
* 02110-1301 USA
*/
#include <linux/module.h>
#include <linux/errno.h>
#include <linux/device.h>
#include <linux/i2c.h>
#include <linux/gpio.h>
#include <linux/regulator/consumer.h>
#include <linux/slab.h>
#include <sound/tpa6130a2-plat.h>
#include <sound/soc.h>
#include <sound/tlv.h>
#include "tpa6130a2.h"
static struct i2c_client *tpa6130a2_client;
/* This struct is used to save the context */
struct tpa6130a2_data {
struct mutex mutex;
unsigned char regs[TPA6130A2_CACHEREGNUM];
struct regulator *supply;
int power_gpio;
u8 power_state:1;
enum tpa_model id;
};
static int tpa6130a2_i2c_read(int reg)
{
struct tpa6130a2_data *data;
int val;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
/* If powered off, return the cached value */
if (data->power_state) {
val = i2c_smbus_read_byte_data(tpa6130a2_client, reg);
if (val < 0)
dev_err(&tpa6130a2_client->dev, "Read failed\n");
else
data->regs[reg] = val;
} else {
val = data->regs[reg];
}
return val;
}
static int tpa6130a2_i2c_write(int reg, u8 value)
{
struct tpa6130a2_data *data;
int val = 0;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
if (data->power_state) {
val = i2c_smbus_write_byte_data(tpa6130a2_client, reg, value);
if (val < 0) {
dev_err(&tpa6130a2_client->dev, "Write failed\n");
return val;
}
}
/* Either powered on or off, we save the context */
data->regs[reg] = value;
return val;
}
static u8 tpa6130a2_read(int reg)
{
struct tpa6130a2_data *data;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
return data->regs[reg];
}
static int tpa6130a2_initialize(void)
{
struct tpa6130a2_data *data;
int i, ret = 0;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
for (i = 1; i < TPA6130A2_REG_VERSION; i++) {
ret = tpa6130a2_i2c_write(i, data->regs[i]);
if (ret < 0)
break;
}
return ret;
}
static int tpa6130a2_power(u8 power)
{
struct tpa6130a2_data *data;
u8 val;
int ret = 0;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
mutex_lock(&data->mutex);
if (power == data->power_state)
goto exit;
if (power) {
ret = regulator_enable(data->supply);
if (ret != 0) {
dev_err(&tpa6130a2_client->dev,
"Failed to enable supply: %d\n", ret);
goto exit;
}
/* Power on */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 1);
data->power_state = 1;
ret = tpa6130a2_initialize();
if (ret < 0) {
dev_err(&tpa6130a2_client->dev,
"Failed to initialize chip\n");
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 0);
regulator_disable(data->supply);
data->power_state = 0;
goto exit;
}
} else {
/* set SWS */
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val |= TPA6130A2_SWS;
tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
/* Power off */
if (data->power_gpio >= 0)
gpio_set_value(data->power_gpio, 0);
ret = regulator_disable(data->supply);
if (ret != 0) {
dev_err(&tpa6130a2_client->dev,
"Failed to disable supply: %d\n", ret);
goto exit;
}
data->power_state = 0;
}
exit:
mutex_unlock(&data->mutex);
return ret;
}
static int tpa6130a2_get_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct tpa6130a2_data *data;
unsigned int reg = mc->reg;
unsigned int shift = mc->shift;
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
mutex_lock(&data->mutex);
ucontrol->value.integer.value[0] =
(tpa6130a2_read(reg) >> shift) & mask;
if (invert)
ucontrol->value.integer.value[0] =
max - ucontrol->value.integer.value[0];
mutex_unlock(&data->mutex);
return 0;
}
static int tpa6130a2_put_volsw(struct snd_kcontrol *kcontrol,
struct snd_ctl_elem_value *ucontrol)
{
struct soc_mixer_control *mc =
(struct soc_mixer_control *)kcontrol->private_value;
struct tpa6130a2_data *data;
unsigned int reg = mc->reg;
unsigned int shift = mc->shift;
int max = mc->max;
unsigned int mask = (1 << fls(max)) - 1;
unsigned int invert = mc->invert;
unsigned int val = (ucontrol->value.integer.value[0] & mask);
unsigned int val_reg;
BUG_ON(tpa6130a2_client == NULL);
data = i2c_get_clientdata(tpa6130a2_client);
if (invert)
val = max - val;
mutex_lock(&data->mutex);
val_reg = tpa6130a2_read(reg);
if (((val_reg >> shift) & mask) == val) {
mutex_unlock(&data->mutex);
return 0;
}
val_reg &= ~(mask << shift);
val_reg |= val << shift;
tpa6130a2_i2c_write(reg, val_reg);
mutex_unlock(&data->mutex);
return 1;
}
/*
* TPA6130 volume. From -59.5 to 4 dB with increasing step size when going
* down in gain.
*/
static const unsigned int tpa6130_tlv[] = {
TLV_DB_RANGE_HEAD(10),
0, 1, TLV_DB_SCALE_ITEM(-5950, 600, 0),
2, 3, TLV_DB_SCALE_ITEM(-5000, 250, 0),
4, 5, TLV_DB_SCALE_ITEM(-4550, 160, 0),
6, 7, TLV_DB_SCALE_ITEM(-4140, 190, 0),
8, 9, TLV_DB_SCALE_ITEM(-3650, 120, 0),
10, 11, TLV_DB_SCALE_ITEM(-3330, 160, 0),
12, 13, TLV_DB_SCALE_ITEM(-3040, 180, 0),
14, 20, TLV_DB_SCALE_ITEM(-2710, 110, 0),
21, 37, TLV_DB_SCALE_ITEM(-1960, 74, 0),
38, 63, TLV_DB_SCALE_ITEM(-720, 45, 0),
};
static const struct snd_kcontrol_new tpa6130a2_controls[] = {
SOC_SINGLE_EXT_TLV("TPA6130A2 Headphone Playback Volume",
TPA6130A2_REG_VOL_MUTE, 0, 0x3f, 0,
tpa6130a2_get_volsw, tpa6130a2_put_volsw,
tpa6130_tlv),
};
static const unsigned int tpa6140_tlv[] = {
TLV_DB_RANGE_HEAD(3),
0, 8, TLV_DB_SCALE_ITEM(-5900, 400, 0),
9, 16, TLV_DB_SCALE_ITEM(-2500, 200, 0),
17, 31, TLV_DB_SCALE_ITEM(-1000, 100, 0),
};
static const struct snd_kcontrol_new tpa6140a2_controls[] = {
SOC_SINGLE_EXT_TLV("TPA6140A2 Headphone Playback Volume",
TPA6130A2_REG_VOL_MUTE, 1, 0x1f, 0,
tpa6130a2_get_volsw, tpa6130a2_put_volsw,
tpa6140_tlv),
};
/*
* Enable or disable channel (left or right)
* The bit number for mute and amplifier are the same per channel:
* bit 6: Right channel
* bit 7: Left channel
* in both registers.
*/
static void tpa6130a2_channel_enable(u8 channel, int enable)
{
u8 val;
if (enable) {
/* Enable channel */
/* Enable amplifier */
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val |= channel;
val &= ~TPA6130A2_SWS;
tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
/* Unmute channel */
val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
val &= ~channel;
tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
} else {
/* Disable channel */
/* Mute channel */
val = tpa6130a2_read(TPA6130A2_REG_VOL_MUTE);
val |= channel;
tpa6130a2_i2c_write(TPA6130A2_REG_VOL_MUTE, val);
/* Disable amplifier */
val = tpa6130a2_read(TPA6130A2_REG_CONTROL);
val &= ~channel;
tpa6130a2_i2c_write(TPA6130A2_REG_CONTROL, val);
}
}
int tpa6130a2_stereo_enable(struct snd_soc_codec *codec, int enable)
{
int ret = 0;
if (enable) {
ret = tpa6130a2_power(1);
if (ret < 0)
return ret;
tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
1);
} else {
tpa6130a2_channel_enable(TPA6130A2_HP_EN_R | TPA6130A2_HP_EN_L,
0);
ret = tpa6130a2_power(0);
}
return ret;
}
EXPORT_SYMBOL_GPL(tpa6130a2_stereo_enable);
int tpa6130a2_add_controls(struct snd_soc_codec *codec)
{
struct tpa6130a2_data *data;
struct snd_soc_dapm_context *dapm = &codec->dapm;
if (tpa6130a2_client == NULL)
return -ENODEV;
data = i2c_get_clientdata(tpa6130a2_client);
if (data->id == TPA6140A2)
return snd_soc_add_controls(codec, tpa6140a2_controls,
ARRAY_SIZE(tpa6140a2_controls));
else
return snd_soc_add_controls(codec, tpa6130a2_controls,
ARRAY_SIZE(tpa6130a2_controls));
}
EXPORT_SYMBOL_GPL(tpa6130a2_add_controls);
static int __devinit tpa6130a2_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct device *dev;
struct tpa6130a2_data *data;
struct tpa6130a2_platform_data *pdata;
const char *regulator;
int ret;
dev = &client->dev;
if (client->dev.platform_data == NULL) {
dev_err(dev, "Platform data not set\n");
dump_stack();
return -ENODEV;
}
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL) {
dev_err(dev, "Can not allocate memory\n");
return -ENOMEM;
}
tpa6130a2_client = client;
i2c_set_clientdata(tpa6130a2_client, data);
pdata = client->dev.platform_data;
data->power_gpio = pdata->power_gpio;
data->id = pdata->id;
mutex_init(&data->mutex);
/* Set default register values */
data->regs[TPA6130A2_REG_CONTROL] = TPA6130A2_SWS;
data->regs[TPA6130A2_REG_VOL_MUTE] = TPA6130A2_MUTE_R |
TPA6130A2_MUTE_L;
if (data->power_gpio >= 0) {
ret = gpio_request(data->power_gpio, "tpa6130a2 enable");
if (ret < 0) {
dev_err(dev, "Failed to request power GPIO (%d)\n",
data->power_gpio);
goto err_gpio;
}
gpio_direction_output(data->power_gpio, 0);
}
switch (data->id) {
default:
dev_warn(dev, "Unknown TPA model (%d). Assuming 6130A2\n",
pdata->id);
case TPA6130A2:
regulator = "Vdd";
break;
case TPA6140A2:
regulator = "AVdd";
break;
}
data->supply = regulator_get(dev, regulator);
if (IS_ERR(data->supply)) {
ret = PTR_ERR(data->supply);
dev_err(dev, "Failed to request supply: %d\n", ret);
goto err_regulator;
}
ret = tpa6130a2_power(1);
if (ret != 0)
goto err_power;
/* Read version */
ret = tpa6130a2_i2c_read(TPA6130A2_REG_VERSION) &
TPA6130A2_VERSION_MASK;
if ((ret != 1) && (ret != 2))
dev_warn(dev, "UNTESTED version detected (%d)\n", ret);
/* Disable the chip */
ret = tpa6130a2_power(0);
if (ret != 0)
goto err_power;
return 0;
err_power:
regulator_put(data->supply);
err_regulator:
if (data->power_gpio >= 0)
gpio_free(data->power_gpio);
err_gpio:
kfree(data);
i2c_set_clientdata(tpa6130a2_client, NULL);
tpa6130a2_client = NULL;
return ret;
}
static int __devexit tpa6130a2_remove(struct i2c_client *client)
{
struct tpa6130a2_data *data = i2c_get_clientdata(client);
tpa6130a2_power(0);
if (data->power_gpio >= 0)
gpio_free(data->power_gpio);
regulator_put(data->supply);
kfree(data);
tpa6130a2_client = NULL;
return 0;
}
static const struct i2c_device_id tpa6130a2_id[] = {
{ "tpa6130a2", 0 },
{ }
};
MODULE_DEVICE_TABLE(i2c, tpa6130a2_id);
static struct i2c_driver tpa6130a2_i2c_driver = {
.driver = {
.name = "tpa6130a2",
.owner = THIS_MODULE,
},
.probe = tpa6130a2_probe,
.remove = __devexit_p(tpa6130a2_remove),
.id_table = tpa6130a2_id,
};
static int __init tpa6130a2_init(void)
{
return i2c_add_driver(&tpa6130a2_i2c_driver);
}
static void __exit tpa6130a2_exit(void)
{
i2c_del_driver(&tpa6130a2_i2c_driver);
}
MODULE_AUTHOR("Peter Ujfalusi");
MODULE_DESCRIPTION("TPA6130A2 Headphone amplifier driver");
MODULE_LICENSE("GPL");
module_init(tpa6130a2_init);
module_exit(tpa6130a2_exit);