Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/powerpc/boot/dts/kmeter1.dts
Heiko Schocher 8159df72d4 83xx: add support for the kmeter1 board. 
The following series implements basic board support for
the kmeter1 board from keymile, based on a MPC8360.

This series provides the following functionality:

- The board can boot with a serial console on UART1
- Ethernet:
    UCC1 in RGMII mode
    UCC2 in RGMII mode
    UCC4 in RMII mode
    UCC5 in RMII mode
    UCC6 in RMII mode
    UCC7 in RMII mode
    UCC8 in RMII mode

    following patch is necessary for working UCC in RMII mode:

    http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html

- Flash accessed via MTD layer

  On this hardware there is an Intel P30 flash, following patch
  series is necessary for working with this hardware:

  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html

- I2C using I2C Bus 1 from the MPC8360 cpu

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:09 -05:00

520 lines
13 KiB
Text
Raw Blame History

/*
* Keymile KMETER1 Device Tree Source
*
* 2008 DENX Software Engineering GmbH
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/dts-v1/;
/ {
model = "KMETER1";
compatible = "keymile,KMETER1";
#address-cells = <1>;
#size-cells = <1>;
aliases {
ethernet0 = &enet_piggy2;
ethernet1 = &enet_estar1;
ethernet2 = &enet_estar2;
ethernet3 = &enet_eth1;
ethernet4 = &enet_eth2;
ethernet5 = &enet_eth3;
ethernet6 = &enet_eth4;
serial0 = &serial0;
};
cpus {
#address-cells = <1>;
#size-cells = <0>;
PowerPC,8360@0 {
device_type = "cpu";
reg = <0x0>;
d-cache-line-size = <32>; // 32 bytes
i-cache-line-size = <32>; // 32 bytes
d-cache-size = <32768>; // L1, 32K
i-cache-size = <32768>; // L1, 32K
timebase-frequency = <0>; /* Filled in by U-Boot */
bus-frequency = <0>; /* Filled in by U-Boot */
clock-frequency = <0>; /* Filled in by U-Boot */
};
};
memory {
device_type = "memory";
reg = <0 0>; /* Filled in by U-Boot */
};
soc8360@e0000000 {
#address-cells = <1>;
#size-cells = <1>;
device_type = "soc";
compatible = "fsl,mpc8360-immr", "simple-bus";
ranges = <0x0 0xe0000000 0x00200000>;
reg = <0xe0000000 0x00000200>;
bus-frequency = <0>; /* Filled in by U-Boot */
i2c@3000 {
#address-cells = <1>;
#size-cells = <0>;
cell-index = <0>;
compatible = "fsl-i2c";
reg = <0x3000 0x100>;
interrupts = <14 0x8>;
interrupt-parent = <&ipic>;
dfsrr;
};
serial0: serial@4500 {
cell-index = <0>;
device_type = "serial";
compatible = "ns16550";
reg = <0x4500 0x100>;
clock-frequency = <264000000>;
interrupts = <9 0x8>;
interrupt-parent = <&ipic>;
};
dma@82a8 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
reg = <0x82a8 4>;
ranges = <0 0x8100 0x1a8>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
cell-index = <0>;
dma-channel@0 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@80 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x80 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@100 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x100 0x80>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
dma-channel@180 {
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
reg = <0x180 0x28>;
interrupt-parent = <&ipic>;
interrupts = <71 8>;
};
};
ipic: pic@700 {
#address-cells = <0>;
#interrupt-cells = <2>;
compatible = "fsl,pq2pro-pic", "fsl,ipic";
interrupt-controller;
reg = <0x700 0x100>;
};
par_io@1400 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x1400 0x100>;
compatible = "fsl,mpc8360-par_io";
num-ports = <7>;
pio_ucc1: ucc_pin@0 {
reg = <0>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
0 3 1 0 1 0 /* TxD0 */
0 4 1 0 1 0 /* TxD1 */
0 5 1 0 1 0 /* TxD2 */
0 6 1 0 1 0 /* TxD3 */
0 9 2 0 1 0 /* RxD0 */
0 10 2 0 1 0 /* RxD1 */
0 11 2 0 1 0 /* RxD2 */
0 12 2 0 1 0 /* RxD3 */
0 7 1 0 1 0 /* TX_EN */
0 8 1 0 1 0 /* TX_ER */
0 15 2 0 1 0 /* RX_DV */
0 16 2 0 1 0 /* RX_ER */
0 0 2 0 1 0 /* RX_CLK */
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
2 8 2 0 1 0 /* GTX125 - CLK9 */
>;
};
pio_ucc2: ucc_pin@1 {
reg = <1>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
0 17 1 0 1 0 /* TxD0 */
0 18 1 0 1 0 /* TxD1 */
0 19 1 0 1 0 /* TxD2 */
0 20 1 0 1 0 /* TxD3 */
0 23 2 0 1 0 /* RxD0 */
0 24 2 0 1 0 /* RxD1 */
0 25 2 0 1 0 /* RxD2 */
0 26 2 0 1 0 /* RxD3 */
0 21 1 0 1 0 /* TX_EN */
0 22 1 0 1 0 /* TX_ER */
0 29 2 0 1 0 /* RX_DV */
0 30 2 0 1 0 /* RX_ER */
0 31 2 0 1 0 /* RX_CLK */
2 2 1 0 2 0 /* GTX_CLK - CLK3 */
2 3 2 0 1 0 /* GTX125 - CLK4 */
>;
};
pio_ucc4: ucc_pin@3 {
reg = <3>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
1 14 1 0 1 0 /* TxD0 (PB14, out, f1) */
1 15 1 0 1 0 /* TxD1 (PB15, out, f1) */
1 20 2 0 1 0 /* RxD0 (PB20, in, f1) */
1 21 2 0 1 0 /* RxD1 (PB21, in, f1) */
1 18 1 0 1 0 /* TX_EN (PB18, out, f1) */
1 26 2 0 1 0 /* RX_DV (PB26, in, f1) */
1 27 2 0 1 0 /* RX_ER (PB27, in, f1) */
2 16 2 0 1 0 /* UCC4_RMII_CLK (CLK17) */
>;
};
pio_ucc5: ucc_pin@4 {
reg = <4>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
3 0 1 0 1 0 /* TxD0 (PD0, out, f1) */
3 1 1 0 1 0 /* TxD1 (PD1, out, f1) */
3 6 2 0 1 0 /* RxD0 (PD6, in, f1) */
3 7 2 0 1 0 /* RxD1 (PD7, in, f1) */
3 4 1 0 1 0 /* TX_EN (PD4, out, f1) */
3 12 2 0 1 0 /* RX_DV (PD12, in, f1) */
3 13 2 0 1 0 /* RX_ER (PD13, in, f1) */
>;
};
pio_ucc6: ucc_pin@5 {
reg = <5>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
3 14 1 0 1 0 /* TxD0 (PD14, out, f1) */
3 15 1 0 1 0 /* TxD1 (PD15, out, f1) */
3 20 2 0 1 0 /* RxD0 (PD20, in, f1) */
3 21 2 0 1 0 /* RxD1 (PD21, in, f1) */
3 18 1 0 1 0 /* TX_EN (PD18, out, f1) */
3 26 2 0 1 0 /* RX_DV (PD26, in, f1) */
3 27 2 0 1 0 /* RX_ER (PD27, in, f1) */
>;
};
pio_ucc7: ucc_pin@6 {
reg = <6>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
4 0 1 0 1 0 /* TxD0 (PE0, out, f1) */
4 1 1 0 1 0 /* TxD1 (PE1, out, f1) */
4 6 2 0 1 0 /* RxD0 (PE6, in, f1) */
4 7 2 0 1 0 /* RxD1 (PE7, in, f1) */
4 4 1 0 1 0 /* TX_EN (PE4, out, f1) */
4 12 2 0 1 0 /* RX_DV (PE12, in, f1) */
4 13 2 0 1 0 /* RX_ER (PE13, in, f1) */
>;
};
pio_ucc8: ucc_pin@7 {
reg = <7>;
pio-map = <
/* port pin dir open_drain assignment has_irq */
0 1 3 0 2 0 /* MDIO */
0 2 1 0 1 0 /* MDC */
4 14 1 0 2 0 /* TxD0 (PE14, out, f2) */
4 15 1 0 1 0 /* TxD1 (PE15, out, f1) */
4 20 2 0 1 0 /* RxD0 (PE20, in, f1) */
4 21 2 0 1 0 /* RxD1 (PE21, in, f1) */
4 18 1 0 1 0 /* TX_EN (PE18, out, f1) */
4 26 2 0 1 0 /* RX_DV (PE26, in, f1) */
4 27 2 0 1 0 /* RX_ER (PE27, in, f1) */
2 15 2 0 1 0 /* UCCx_RMII_CLK (CLK16) */
>;
};
};
qe@100000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe";
ranges = <0x0 0x100000 0x100000>;
reg = <0x100000 0x480>;
clock-frequency = <0>; /* Filled in by U-Boot */
brg-frequency = <0>; /* Filled in by U-Boot */
bus-frequency = <0>; /* Filled in by U-Boot */
muram@10000 {
#address-cells = <1>;
#size-cells = <1>;
compatible = "fsl,qe-muram", "fsl,cpm-muram";
ranges = <0x0 0x00010000 0x0000c000>;
data-only@0 {
compatible = "fsl,qe-muram-data",
"fsl,cpm-muram-data";
reg = <0x0 0xc000>;
};
};
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
enet_estar1: ucc@2000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <1>;
reg = <0x2000 0x200>;
interrupts = <32>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk9";
phy-handle = <&phy_estar1>;
phy-connection-type = "rgmii-id";
pio-handle = <&pio_ucc1>;
};
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
enet_estar2: ucc@3000 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <2>;
reg = <0x3000 0x200>;
interrupts = <33>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk4";
phy-handle = <&phy_estar2>;
phy-connection-type = "rgmii-id";
pio-handle = <&pio_ucc2>;
};
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
enet_piggy2: ucc@3200 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <4>;
reg = <0x3200 0x200>;
interrupts = <35>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk17";
phy-handle = <&phy_piggy2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc4>;
};
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
enet_eth1: ucc@2400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <5>;
reg = <0x2400 0x200>;
interrupts = <40>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth1>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc5>;
};
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
enet_eth2: ucc@3400 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <6>;
reg = <0x3400 0x200>;
interrupts = <41>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth2>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc6>;
};
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
enet_eth3: ucc@2600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <7>;
reg = <0x2600 0x200>;
interrupts = <42>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth3>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc7>;
};
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
enet_eth4: ucc@3600 {
device_type = "network";
compatible = "ucc_geth";
cell-index = <8>;
reg = <0x3600 0x200>;
interrupts = <43>;
interrupt-parent = <&qeic>;
local-mac-address = [ 00 00 00 00 00 00 ];
rx-clock-name = "none";
tx-clock-name = "clk16";
phy-handle = <&phy_eth4>;
phy-connection-type = "rmii";
pio-handle = <&pio_ucc8>;
};
mdio@3320 {
#address-cells = <1>;
#size-cells = <0>;
reg = <0x3320 0x18>;
compatible = "fsl,ucc-mdio";
/* Piggy2 (UCC4, MDIO 0x00, RMII) */
phy_piggy2: ethernet-phy@00 {
reg = <0x0>;
};
/* Eth-1 (UCC5, MDIO 0x08, RMII) */
phy_eth1: ethernet-phy@08 {
reg = <0x08>;
};
/* Eth-2 (UCC6, MDIO 0x09, RMII) */
phy_eth2: ethernet-phy@09 {
reg = <0x09>;
};
/* Eth-3 (UCC7, MDIO 0x0a, RMII) */
phy_eth3: ethernet-phy@0a {
reg = <0x0a>;
};
/* Eth-4 (UCC8, MDIO 0x0b, RMII) */
phy_eth4: ethernet-phy@0b {
reg = <0x0b>;
};
/* ESTAR-1 (UCC1, MDIO 0x10, RGMII) */
phy_estar1: ethernet-phy@10 {
interrupt-parent = <&ipic>;
interrupts = <17 0x8>;
reg = <0x10>;
};
/* ESTAR-2 (UCC2, MDIO 0x11, RGMII) */
phy_estar2: ethernet-phy@11 {
interrupt-parent = <&ipic>;
interrupts = <18 0x8>;
reg = <0x11>;
};
};
qeic: interrupt-controller@80 {
interrupt-controller;
compatible = "fsl,qe-ic";
#address-cells = <0>;
#interrupt-cells = <1>;
reg = <0x80 0x80>;
interrupts = <32 8 33 8>;
interrupt-parent = <&ipic>;
};
};
};
localbus@e0005000 {
#address-cells = <2>;
#size-cells = <1>;
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
"simple-bus";
reg = <0xe0005000 0xd8>;
ranges = <0 0 0xf0000000 0x04000000>; /* Filled in by U-Boot */
flash@f0000000,0 {
compatible = "cfi-flash";
/*
* The Intel P30 chip has 2 non-identical chips on
* one die, so we need to define 2 seperate regions
* that are scanned by physmap_of independantly.
*/
reg = <0 0x00000000 0x02000000
0 0x02000000 0x02000000>; /* Filled in by U-Boot */
bank-width = <2>;
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0 0x40000>;
};
partition@40000 {
label = "env";
reg = <0x40000 0x40000>;
};
partition@80000 {
label = "dtb";
reg = <0x80000 0x20000>;
};
partition@a0000 {
label = "kernel";
reg = <0xa0000 0x300000>;
};
partition@3a0000 {
label = "ramdisk";
reg = <0x3a0000 0x800000>;
};
partition@ba0000 {
label = "user";
reg = <0xba0000 0x3460000>;
};
};
};
};
Reference in a new issue View git blame Copy permalink