5b70a09705
Modify mpc83xx_add_bridge to get config space register base address from
the device tree instead of immr + hardcoded offset.
83xx pci nodes have this change:
register properties now contain two address length tuples:
First is the pci bridge register base, this has always been there.
Second is the config base, this is new.
This is documented in dts-bindings/fsl/83xx-512x-pci.txt
The changes accomplish these things:
mpc83xx_add_bridge no longer needs to call get_immrbase
it uses hard coded addresses if the second register value is missing
Signed-off-by: John Rigby <jrigby@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
434 lines
10 KiB
Text
434 lines
10 KiB
Text
/*
|
|
* MPC8360E EMDS Device Tree Source
|
|
*
|
|
* Copyright 2006 Freescale Semiconductor Inc.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the
|
|
* Free Software Foundation; either version 2 of the License, or (at your
|
|
* option) any later version.
|
|
*/
|
|
|
|
|
|
/*
|
|
/memreserve/ 00000000 1000000;
|
|
*/
|
|
|
|
/dts-v1/;
|
|
|
|
/ {
|
|
model = "MPC8360MDS";
|
|
compatible = "MPC8360EMDS", "MPC836xMDS", "MPC83xxMDS";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
aliases {
|
|
ethernet0 = &enet0;
|
|
ethernet1 = &enet1;
|
|
serial0 = &serial0;
|
|
serial1 = &serial1;
|
|
pci0 = &pci0;
|
|
};
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
PowerPC,8360@0 {
|
|
device_type = "cpu";
|
|
reg = <0x0>;
|
|
d-cache-line-size = <32>; // 32 bytes
|
|
i-cache-line-size = <32>; // 32 bytes
|
|
d-cache-size = <32768>; // L1, 32K
|
|
i-cache-size = <32768>; // L1, 32K
|
|
timebase-frequency = <66000000>;
|
|
bus-frequency = <264000000>;
|
|
clock-frequency = <528000000>;
|
|
};
|
|
};
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
reg = <0x00000000 0x10000000>;
|
|
};
|
|
|
|
localbus@e0005000 {
|
|
#address-cells = <2>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8360-localbus", "fsl,pq2pro-localbus",
|
|
"simple-bus";
|
|
reg = <0xe0005000 0xd8>;
|
|
ranges = <0 0 0xfe000000 0x02000000
|
|
1 0 0xf8000000 0x00008000>;
|
|
|
|
flash@0,0 {
|
|
compatible = "cfi-flash";
|
|
reg = <0 0 0x2000000>;
|
|
bank-width = <2>;
|
|
device-width = <1>;
|
|
};
|
|
|
|
bcsr@1,0 {
|
|
device_type = "board-control";
|
|
reg = <1 0 0x8000>;
|
|
};
|
|
};
|
|
|
|
soc8360@e0000000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "soc";
|
|
compatible = "simple-bus";
|
|
ranges = <0x0 0xe0000000 0x00100000>;
|
|
reg = <0xe0000000 0x00000200>;
|
|
bus-frequency = <264000000>;
|
|
|
|
wdt@200 {
|
|
device_type = "watchdog";
|
|
compatible = "mpc83xx_wdt";
|
|
reg = <0x200 0x100>;
|
|
};
|
|
|
|
i2c@3000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <0>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3000 0x100>;
|
|
interrupts = <14 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
|
|
rtc@68 {
|
|
compatible = "dallas,ds1374";
|
|
reg = <0x68>;
|
|
};
|
|
};
|
|
|
|
i2c@3100 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
cell-index = <1>;
|
|
compatible = "fsl-i2c";
|
|
reg = <0x3100 0x100>;
|
|
interrupts = <15 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
dfsrr;
|
|
};
|
|
|
|
serial0: serial@4500 {
|
|
cell-index = <0>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4500 0x100>;
|
|
clock-frequency = <264000000>;
|
|
interrupts = <9 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
serial1: serial@4600 {
|
|
cell-index = <1>;
|
|
device_type = "serial";
|
|
compatible = "ns16550";
|
|
reg = <0x4600 0x100>;
|
|
clock-frequency = <264000000>;
|
|
interrupts = <10 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
|
|
dma@82a8 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,mpc8360-dma", "fsl,elo-dma";
|
|
reg = <0x82a8 4>;
|
|
ranges = <0 0x8100 0x1a8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
cell-index = <0>;
|
|
dma-channel@0 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0 0x80>;
|
|
cell-index = <0>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@80 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x80 0x80>;
|
|
cell-index = <1>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@100 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x100 0x80>;
|
|
cell-index = <2>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
dma-channel@180 {
|
|
compatible = "fsl,mpc8360-dma-channel", "fsl,elo-dma-channel";
|
|
reg = <0x180 0x28>;
|
|
cell-index = <3>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <71 8>;
|
|
};
|
|
};
|
|
|
|
crypto@30000 {
|
|
compatible = "fsl,sec2.0";
|
|
reg = <0x30000 0x10000>;
|
|
interrupts = <11 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
fsl,num-channels = <4>;
|
|
fsl,channel-fifo-len = <24>;
|
|
fsl,exec-units-mask = <0x7e>;
|
|
fsl,descriptor-types-mask = <0x01010ebf>;
|
|
};
|
|
|
|
ipic: pic@700 {
|
|
interrupt-controller;
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <2>;
|
|
reg = <0x700 0x100>;
|
|
device_type = "ipic";
|
|
};
|
|
|
|
par_io@1400 {
|
|
reg = <0x1400 0x100>;
|
|
device_type = "par_io";
|
|
num-ports = <7>;
|
|
|
|
pio1: ucc_pin@01 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 3 1 0 1 0 /* TxD0 */
|
|
0 4 1 0 1 0 /* TxD1 */
|
|
0 5 1 0 1 0 /* TxD2 */
|
|
0 6 1 0 1 0 /* TxD3 */
|
|
1 6 1 0 3 0 /* TxD4 */
|
|
1 7 1 0 1 0 /* TxD5 */
|
|
1 9 1 0 2 0 /* TxD6 */
|
|
1 10 1 0 2 0 /* TxD7 */
|
|
0 9 2 0 1 0 /* RxD0 */
|
|
0 10 2 0 1 0 /* RxD1 */
|
|
0 11 2 0 1 0 /* RxD2 */
|
|
0 12 2 0 1 0 /* RxD3 */
|
|
0 13 2 0 1 0 /* RxD4 */
|
|
1 1 2 0 2 0 /* RxD5 */
|
|
1 0 2 0 2 0 /* RxD6 */
|
|
1 4 2 0 2 0 /* RxD7 */
|
|
0 7 1 0 1 0 /* TX_EN */
|
|
0 8 1 0 1 0 /* TX_ER */
|
|
0 15 2 0 1 0 /* RX_DV */
|
|
0 16 2 0 1 0 /* RX_ER */
|
|
0 0 2 0 1 0 /* RX_CLK */
|
|
2 9 1 0 3 0 /* GTX_CLK - CLK10 */
|
|
2 8 2 0 1 0>; /* GTX125 - CLK9 */
|
|
};
|
|
pio2: ucc_pin@02 {
|
|
pio-map = <
|
|
/* port pin dir open_drain assignment has_irq */
|
|
0 17 1 0 1 0 /* TxD0 */
|
|
0 18 1 0 1 0 /* TxD1 */
|
|
0 19 1 0 1 0 /* TxD2 */
|
|
0 20 1 0 1 0 /* TxD3 */
|
|
1 2 1 0 1 0 /* TxD4 */
|
|
1 3 1 0 2 0 /* TxD5 */
|
|
1 5 1 0 3 0 /* TxD6 */
|
|
1 8 1 0 3 0 /* TxD7 */
|
|
0 23 2 0 1 0 /* RxD0 */
|
|
0 24 2 0 1 0 /* RxD1 */
|
|
0 25 2 0 1 0 /* RxD2 */
|
|
0 26 2 0 1 0 /* RxD3 */
|
|
0 27 2 0 1 0 /* RxD4 */
|
|
1 12 2 0 2 0 /* RxD5 */
|
|
1 13 2 0 3 0 /* RxD6 */
|
|
1 11 2 0 2 0 /* RxD7 */
|
|
0 21 1 0 1 0 /* TX_EN */
|
|
0 22 1 0 1 0 /* TX_ER */
|
|
0 29 2 0 1 0 /* RX_DV */
|
|
0 30 2 0 1 0 /* RX_ER */
|
|
0 31 2 0 1 0 /* RX_CLK */
|
|
2 2 1 0 2 0 /* GTX_CLK - CLK10 */
|
|
2 3 2 0 1 0 /* GTX125 - CLK4 */
|
|
0 1 3 0 2 0 /* MDIO */
|
|
0 2 1 0 1 0>; /* MDC */
|
|
};
|
|
|
|
};
|
|
};
|
|
|
|
qe@e0100000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
device_type = "qe";
|
|
compatible = "fsl,qe";
|
|
ranges = <0x0 0xe0100000 0x00100000>;
|
|
reg = <0xe0100000 0x480>;
|
|
brg-frequency = <0>;
|
|
bus-frequency = <396000000>;
|
|
|
|
muram@10000 {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
compatible = "fsl,qe-muram", "fsl,cpm-muram";
|
|
ranges = <0x0 0x00010000 0x0000c000>;
|
|
|
|
data-only@0 {
|
|
compatible = "fsl,qe-muram-data",
|
|
"fsl,cpm-muram-data";
|
|
reg = <0x0 0xc000>;
|
|
};
|
|
};
|
|
|
|
spi@4c0 {
|
|
cell-index = <0>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x4c0 0x40>;
|
|
interrupts = <2>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
spi@500 {
|
|
cell-index = <1>;
|
|
compatible = "fsl,spi";
|
|
reg = <0x500 0x40>;
|
|
interrupts = <1>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "cpu";
|
|
};
|
|
|
|
usb@6c0 {
|
|
compatible = "qe_udc";
|
|
reg = <0x6c0 0x40 0x8b00 0x100>;
|
|
interrupts = <11>;
|
|
interrupt-parent = <&qeic>;
|
|
mode = "slave";
|
|
};
|
|
|
|
enet0: ucc@2000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <1>;
|
|
reg = <0x2000 0x200>;
|
|
interrupts = <32>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk9";
|
|
phy-handle = <&phy0>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio1>;
|
|
};
|
|
|
|
enet1: ucc@3000 {
|
|
device_type = "network";
|
|
compatible = "ucc_geth";
|
|
cell-index = <2>;
|
|
reg = <0x3000 0x200>;
|
|
interrupts = <33>;
|
|
interrupt-parent = <&qeic>;
|
|
local-mac-address = [ 00 00 00 00 00 00 ];
|
|
rx-clock-name = "none";
|
|
tx-clock-name = "clk4";
|
|
phy-handle = <&phy1>;
|
|
phy-connection-type = "rgmii-id";
|
|
pio-handle = <&pio2>;
|
|
};
|
|
|
|
mdio@2120 {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
reg = <0x2120 0x18>;
|
|
compatible = "fsl,ucc-mdio";
|
|
|
|
phy0: ethernet-phy@00 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <17 0x8>;
|
|
reg = <0x0>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
phy1: ethernet-phy@01 {
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <18 0x8>;
|
|
reg = <0x1>;
|
|
device_type = "ethernet-phy";
|
|
};
|
|
};
|
|
|
|
qeic: interrupt-controller@80 {
|
|
interrupt-controller;
|
|
compatible = "fsl,qe-ic";
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
reg = <0x80 0x80>;
|
|
big-endian;
|
|
interrupts = <32 0x8 33 0x8>; // high:32 low:33
|
|
interrupt-parent = <&ipic>;
|
|
};
|
|
};
|
|
|
|
pci0: pci@e0008500 {
|
|
cell-index = <1>;
|
|
interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
|
|
interrupt-map = <
|
|
|
|
/* IDSEL 0x11 AD17 */
|
|
0x8800 0x0 0x0 0x1 &ipic 20 0x8
|
|
0x8800 0x0 0x0 0x2 &ipic 21 0x8
|
|
0x8800 0x0 0x0 0x3 &ipic 22 0x8
|
|
0x8800 0x0 0x0 0x4 &ipic 23 0x8
|
|
|
|
/* IDSEL 0x12 AD18 */
|
|
0x9000 0x0 0x0 0x1 &ipic 22 0x8
|
|
0x9000 0x0 0x0 0x2 &ipic 23 0x8
|
|
0x9000 0x0 0x0 0x3 &ipic 20 0x8
|
|
0x9000 0x0 0x0 0x4 &ipic 21 0x8
|
|
|
|
/* IDSEL 0x13 AD19 */
|
|
0x9800 0x0 0x0 0x1 &ipic 23 0x8
|
|
0x9800 0x0 0x0 0x2 &ipic 20 0x8
|
|
0x9800 0x0 0x0 0x3 &ipic 21 0x8
|
|
0x9800 0x0 0x0 0x4 &ipic 22 0x8
|
|
|
|
/* IDSEL 0x15 AD21*/
|
|
0xa800 0x0 0x0 0x1 &ipic 20 0x8
|
|
0xa800 0x0 0x0 0x2 &ipic 21 0x8
|
|
0xa800 0x0 0x0 0x3 &ipic 22 0x8
|
|
0xa800 0x0 0x0 0x4 &ipic 23 0x8
|
|
|
|
/* IDSEL 0x16 AD22*/
|
|
0xb000 0x0 0x0 0x1 &ipic 23 0x8
|
|
0xb000 0x0 0x0 0x2 &ipic 20 0x8
|
|
0xb000 0x0 0x0 0x3 &ipic 21 0x8
|
|
0xb000 0x0 0x0 0x4 &ipic 22 0x8
|
|
|
|
/* IDSEL 0x17 AD23*/
|
|
0xb800 0x0 0x0 0x1 &ipic 22 0x8
|
|
0xb800 0x0 0x0 0x2 &ipic 23 0x8
|
|
0xb800 0x0 0x0 0x3 &ipic 20 0x8
|
|
0xb800 0x0 0x0 0x4 &ipic 21 0x8
|
|
|
|
/* IDSEL 0x18 AD24*/
|
|
0xc000 0x0 0x0 0x1 &ipic 21 0x8
|
|
0xc000 0x0 0x0 0x2 &ipic 22 0x8
|
|
0xc000 0x0 0x0 0x3 &ipic 23 0x8
|
|
0xc000 0x0 0x0 0x4 &ipic 20 0x8>;
|
|
interrupt-parent = <&ipic>;
|
|
interrupts = <66 0x8>;
|
|
bus-range = <0 0>;
|
|
ranges = <0x02000000 0x0 0xa0000000 0xa0000000 0x0 0x10000000
|
|
0x42000000 0x0 0x80000000 0x80000000 0x0 0x10000000
|
|
0x01000000 0x0 0x00000000 0xe2000000 0x0 0x00100000>;
|
|
clock-frequency = <66666666>;
|
|
#interrupt-cells = <1>;
|
|
#size-cells = <2>;
|
|
#address-cells = <3>;
|
|
reg = <0xe0008500 0x100 /* internal registers */
|
|
0xe0008300 0x8>; /* config space access registers */
|
|
compatible = "fsl,mpc8349-pci";
|
|
device_type = "pci";
|
|
};
|
|
};
|