kernel-fxtec-pro1x/drivers/usb
Sven Anderson 35f4a0c441 [PATCH] USB: clean up all iPod models in unusual_devs.h
Phil Dibowitz wrote:
> 1. You're adding product IDs 1202, 1203, 1204, and 1205. 1203 was
> already there, but you remove it, OK, but 1205 is already there, so
> you'll need to fix that.

I was not removing 1203, it's just the extension of the bcd range. You are 
right about 1205, as I wrote, it was a patch against 2.6.11.7. Attached is 
a patch against 2.6.12-rc2.

> 2. I'm OK with the full bcd range if Apple is changing it on firmware
> revs... fine, but it's bcd, not hex... 0x9999 =)

I just copied from other entries. There're a lot 0xffffs in unusual_dev.h, 
so I assumed it is correct. I changed it to 0x9999.

> 3. It's rather obnoxious to take the original submitter's credit away.

I didn't remove it, I changed it to "based on...". Because I changed 
something (the range) in his entry, I thought it is the best to take the 
responsibility but keep the origin. Anyway, in the new patch I did it in a 
different way.

> 4. Your /proc/bus/usb/devices shows 1204, but I see no evidence 1202 is
> really an iPod.

I don't have an old iPod mini, but you find a lot of evidence here:

http://www.google.com/search?q=0x1202+ipod

Especially this one:

http://www.qbik.ch/usb/devices/showdescr.php?id=2737

> It also looks like 1205's entry is getting mangled, but I haven't
> attempted to apply the patch, so I'm not sure.

No, the patch was ok, but I agree it looks strange. It's not very 
readable, because I cannot tell diff to work blockwise instead of 
linewise. Because of the similarity of the entries, diff splits and merges 
them. Anyway, the new patch "looks" better. ;-)

Signed-off-by: Sven Anderson <sven-linux@anderson.de>
Signed-off-by: Phil Dibowitz <phil@ipom.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2005-04-22 15:06:58 -07:00
..
atm Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
class [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL 2005-04-18 17:39:34 -07:00
core [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL 2005-04-18 17:39:34 -07:00
gadget [PATCH] usb gadget: ethernet/rndis updates 2005-04-18 17:39:34 -07:00
host Merge with kernel.org:/pub/scm/linux/kernel/git/gregkh/driver-2.6.git/ 2005-04-19 13:14:28 -07:00
image [PATCH] USB: compilation failure on usb/image/microtek.c 2005-04-22 15:06:58 -07:00
input [PATCH] USB: fix AIPTEK input doesnt register device & driver` section in sysfs (/sys/class/input/event#) 2005-04-18 17:39:35 -07:00
media [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL 2005-04-18 17:39:34 -07:00
misc [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL 2005-04-18 17:39:34 -07:00
mon Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
net [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL 2005-04-18 17:39:34 -07:00
serial [PATCH] USB: kfree cleanup for drivers/usb/* - no need to check for NULL 2005-04-18 17:39:34 -07:00
storage [PATCH] USB: clean up all iPod models in unusual_devs.h 2005-04-22 15:06:58 -07:00
Kconfig Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
Makefile Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
README Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00
usb-skeleton.c Linux-2.6.12-rc2 2005-04-16 15:20:36 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
input/		- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
media/		- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.