kernel-fxtec-pro1x/include/asm-sh/rts7751r2d.h
Magnus Damm 5ca95c48f1 sh: fix cf support on r2d boards
This patch makes sure cf support is enabled on R2D-PLUS but disabled
on R2D-1. Without this fix R2D-1 boards hang on bootup.

Signed-off-by: Magnus Damm <damm@igel.co.jp>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
2007-08-03 10:16:29 +09:00

78 lines
2.9 KiB
C

#ifndef __ASM_SH_RENESAS_RTS7751R2D_H
#define __ASM_SH_RENESAS_RTS7751R2D_H
/*
* linux/include/asm-sh/renesas_rts7751r2d.h
*
* Copyright (C) 2000 Atom Create Engineering Co., Ltd.
*
* Renesas Technology Sales RTS7751R2D support
*/
/* Box specific addresses. */
#define PA_BCR 0xa4000000 /* FPGA */
#define PA_IRLMON 0xa4000002 /* Interrupt Status control */
#define PA_CFCTL 0xa4000004 /* CF Timing control */
#define PA_CFPOW 0xa4000006 /* CF Power control */
#define PA_DISPCTL 0xa4000008 /* Display Timing control */
#define PA_SDMPOW 0xa400000a /* SD Power control */
#define PA_RTCCE 0xa400000c /* RTC(9701) Enable control */
#define PA_PCICD 0xa400000e /* PCI Extention detect control */
#define PA_VOYAGERRTS 0xa4000020 /* VOYAGER Reset control */
#if defined(CONFIG_RTS7751R2D_REV11)
#define PA_AXRST 0xa4000022 /* AX_LAN Reset control */
#define PA_CFRST 0xa4000024 /* CF Reset control */
#define PA_ADMRTS 0xa4000026 /* SD Reset control */
#define PA_EXTRST 0xa4000028 /* Extention Reset control */
#define PA_CFCDINTCLR 0xa400002a /* CF Insert Interrupt clear */
#else
#define PA_CFRST 0xa4000022 /* CF Reset control */
#define PA_ADMRTS 0xa4000024 /* SD Reset control */
#define PA_EXTRST 0xa4000026 /* Extention Reset control */
#define PA_CFCDINTCLR 0xa4000028 /* CF Insert Interrupt clear */
#define PA_KEYCTLCLR 0xa400002a /* Key Interrupt clear */
#endif
#define PA_POWOFF 0xa4000030 /* Board Power OFF control */
#define PA_VERREG 0xa4000032 /* FPGA Version Register */
#define PA_INPORT 0xa4000034 /* KEY Input Port control */
#define PA_OUTPORT 0xa4000036 /* LED control */
#define PA_BVERREG 0xa4000038 /* Board Revision Register */
#define PA_AX88796L 0xaa000400 /* AX88796L Area */
#define PA_VOYAGER 0xab000000 /* VOYAGER GX Area */
#define PA_IDE_OFFSET 0x1f0 /* CF IDE Offset */
#define AX88796L_IO_BASE 0x1000 /* AX88796L IO Base Address */
#define IRLCNTR1 (PA_BCR + 0) /* Interrupt Control Register1 */
#if defined(CONFIG_RTS7751R2D_REV11)
#define IRQ_PCIETH 0 /* PCI Ethernet IRQ */
#define IRQ_CFCARD 1 /* CF Card IRQ */
#define IRQ_CFINST 2 /* CF Card Insert IRQ */
#define IRQ_PCMCIA 3 /* PCMCIA IRQ */
#define IRQ_VOYAGER 4 /* VOYAGER IRQ */
#define IRQ_ONETH 5 /* On board Ethernet IRQ */
#else
#define IRQ_KEYIN 0 /* Key Input IRQ */
#define IRQ_PCIETH 1 /* PCI Ethernet IRQ */
#define IRQ_CFCARD 2 /* CF Card IRQ */
#define IRQ_CFINST 3 /* CF Card Insert IRQ */
#define IRQ_PCMCIA 4 /* PCMCIA IRQ */
#define IRQ_VOYAGER 5 /* VOYAGER IRQ */
#endif
#define IRQ_RTCALM 6 /* RTC Alarm IRQ */
#define IRQ_RTCTIME 7 /* RTC Timer IRQ */
#define IRQ_SDCARD 8 /* SD Card IRQ */
#define IRQ_PCISLOT1 9 /* PCI Slot #1 IRQ */
#define IRQ_PCISLOT2 10 /* PCI Slot #2 IRQ */
#define IRQ_EXTENTION 11 /* EXTn IRQ */
/* arch/sh/boards/renesas/rts7751r2d/irq.c */
void init_rts7751r2d_IRQ(void);
int rts7751r2d_irq_demux(int);
#define __IO_PREFIX rts7751r2d
#include <asm/io_generic.h>
#endif /* __ASM_SH_RENESAS_RTS7751R2D */