Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/powerpc/platforms/83xx
History
Heiko Schocher 8159df72d4 83xx: add support for the kmeter1 board. 
The following series implements basic board support for
the kmeter1 board from keymile, based on a MPC8360.

This series provides the following functionality:

- The board can boot with a serial console on UART1
- Ethernet:
    UCC1 in RGMII mode
    UCC2 in RGMII mode
    UCC4 in RMII mode
    UCC5 in RMII mode
    UCC6 in RMII mode
    UCC7 in RMII mode
    UCC8 in RMII mode

    following patch is necessary for working UCC in RMII mode:

    http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070804.html

- Flash accessed via MTD layer

  On this hardware there is an Intel P30 flash, following patch
  series is necessary for working with this hardware:

  http://lists.ozlabs.org/pipermail/linuxppc-dev/2009-April/070624.html

- I2C using I2C Bus 1 from the MPC8360 cpu

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
2009-06-15 22:15:09 -05:00
..
asp834x.c powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes 2009-03-24 08:35:04 -05:00
Kconfig 83xx: add support for the kmeter1 board. 2009-06-15 22:15:09 -05:00
kmeter1.c 83xx: add support for the kmeter1 board. 2009-06-15 22:15:09 -05:00
Makefile 83xx: add support for the kmeter1 board. 2009-06-15 22:15:09 -05:00
mcu_mpc8349emitx.c powerpc/83xx: Move mcu_mpc8349emitx driver out of drivers/i2c/chips/ 2009-01-13 17:46:31 -06:00
misc.c
mpc83xx.h powerpc/mpc83xx: Fix usb mux setup for mpc834x 2009-06-15 21:45:31 -05:00
mpc831x_rdb.c powerpc/83xx: Add PCI-E support for all MPC83xx boards with PCI-E 2009-01-28 18:16:48 -06:00
mpc832x_mds.c powerpc/83xx: Fix sparse warnings in board files 2008-12-30 11:13:41 -06:00
mpc832x_rdb.c powerpc/fsl_soc: isolate legacy fsl_spi support to mpc832x_rdb boards 2009-04-01 08:59:23 -07:00
mpc834x_itx.c powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes 2009-03-24 08:35:04 -05:00
mpc834x_mds.c powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes 2009-03-24 08:35:04 -05:00
mpc836x_mds.c powerpc/83xx: Add USB Host/Gadget support for MPC8360E-MDS boards 2008-12-30 11:13:46 -06:00
mpc836x_rdk.c powerpc/83xx: Fix few build errors with CONFIG_QUICC_ENGINE=n 2008-12-30 11:14:05 -06:00
mpc837x_mds.c powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes 2009-03-24 08:35:04 -05:00
mpc837x_rdb.c powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes 2009-03-24 08:35:04 -05:00
sbc834x.c powerpc/83xx: Move gianfar mdio nodes under the ethernet nodes 2009-03-24 08:35:04 -05:00
suspend-asm.S powerpc/mpc83xx: Power Management support 2008-07-16 17:57:30 -05:00
suspend.c powerpc/mpc83xx: Power Management support 2008-07-16 17:57:30 -05:00
usb.c powerpc/mpc83xx: Fix usb mux setup for mpc834x 2009-06-15 21:45:31 -05:00