kernel-fxtec-pro1x/sound/oss/pas2_midi.c
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

262 lines
4.9 KiB
C

/*
* sound/pas2_midi.c
*
* The low level driver for the PAS Midi Interface.
*/
/*
* Copyright (C) by Hannu Savolainen 1993-1997
*
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
* Version 2 (June 1991). See the "COPYING" file distributed with this software
* for more info.
*
* Bartlomiej Zolnierkiewicz : Added __init to pas_init_mixer()
*/
#include <linux/init.h>
#include <linux/spinlock.h>
#include "sound_config.h"
#include "pas2.h"
extern spinlock_t pas_lock;
static int midi_busy, input_opened;
static int my_dev;
int pas2_mididev=-1;
static unsigned char tmp_queue[256];
static volatile int qlen;
static volatile unsigned char qhead, qtail;
static void (*midi_input_intr) (int dev, unsigned char data);
static int pas_midi_open(int dev, int mode,
void (*input) (int dev, unsigned char data),
void (*output) (int dev)
)
{
int err;
unsigned long flags;
unsigned char ctrl;
if (midi_busy)
return -EBUSY;
/*
* Reset input and output FIFO pointers
*/
pas_write(0x20 | 0x40,
0x178b);
spin_lock_irqsave(&pas_lock, flags);
if ((err = pas_set_intr(0x10)) < 0)
{
spin_unlock_irqrestore(&pas_lock, flags);
return err;
}
/*
* Enable input available and output FIFO empty interrupts
*/
ctrl = 0;
input_opened = 0;
midi_input_intr = input;
if (mode == OPEN_READ || mode == OPEN_READWRITE)
{
ctrl |= 0x04; /* Enable input */
input_opened = 1;
}
if (mode == OPEN_WRITE || mode == OPEN_READWRITE)
{
ctrl |= 0x08 | 0x10; /* Enable output */
}
pas_write(ctrl, 0x178b);
/*
* Acknowledge any pending interrupts
*/
pas_write(0xff, 0x1B88);
spin_unlock_irqrestore(&pas_lock, flags);
midi_busy = 1;
qlen = qhead = qtail = 0;
return 0;
}
static void pas_midi_close(int dev)
{
/*
* Reset FIFO pointers, disable intrs
*/
pas_write(0x20 | 0x40, 0x178b);
pas_remove_intr(0x10);
midi_busy = 0;
}
static int dump_to_midi(unsigned char midi_byte)
{
int fifo_space, x;
fifo_space = ((x = pas_read(0x1B89)) >> 4) & 0x0f;
/*
* The MIDI FIFO space register and it's documentation is nonunderstandable.
* There seem to be no way to differentiate between buffer full and buffer
* empty situations. For this reason we don't never write the buffer
* completely full. In this way we can assume that 0 (or is it 15)
* means that the buffer is empty.
*/
if (fifo_space < 2 && fifo_space != 0) /* Full (almost) */
return 0; /* Ask upper layers to retry after some time */
pas_write(midi_byte, 0x178A);
return 1;
}
static int pas_midi_out(int dev, unsigned char midi_byte)
{
unsigned long flags;
/*
* Drain the local queue first
*/
spin_lock_irqsave(&pas_lock, flags);
while (qlen && dump_to_midi(tmp_queue[qhead]))
{
qlen--;
qhead++;
}
spin_unlock_irqrestore(&pas_lock, flags);
/*
* Output the byte if the local queue is empty.
*/
if (!qlen)
if (dump_to_midi(midi_byte))
return 1;
/*
* Put to the local queue
*/
if (qlen >= 256)
return 0; /* Local queue full */
spin_lock_irqsave(&pas_lock, flags);
tmp_queue[qtail] = midi_byte;
qlen++;
qtail++;
spin_unlock_irqrestore(&pas_lock, flags);
return 1;
}
static int pas_midi_start_read(int dev)
{
return 0;
}
static int pas_midi_end_read(int dev)
{
return 0;
}
static void pas_midi_kick(int dev)
{
}
static int pas_buffer_status(int dev)
{
return qlen;
}
#define MIDI_SYNTH_NAME "Pro Audio Spectrum Midi"
#define MIDI_SYNTH_CAPS SYNTH_CAP_INPUT
#include "midi_synth.h"
static struct midi_operations pas_midi_operations =
{
.owner = THIS_MODULE,
.info = {"Pro Audio Spectrum", 0, 0, SNDCARD_PAS},
.converter = &std_midi_synth,
.in_info = {0},
.open = pas_midi_open,
.close = pas_midi_close,
.outputc = pas_midi_out,
.start_read = pas_midi_start_read,
.end_read = pas_midi_end_read,
.kick = pas_midi_kick,
.buffer_status = pas_buffer_status,
};
void __init pas_midi_init(void)
{
int dev = sound_alloc_mididev();
if (dev == -1)
{
printk(KERN_WARNING "pas_midi_init: Too many midi devices detected\n");
return;
}
std_midi_synth.midi_dev = my_dev = dev;
midi_devs[dev] = &pas_midi_operations;
pas2_mididev = dev;
sequencer_init();
}
void pas_midi_interrupt(void)
{
unsigned char stat;
int i, incount;
stat = pas_read(0x1B88);
if (stat & 0x04) /* Input data available */
{
incount = pas_read(0x1B89) & 0x0f; /* Input FIFO size */
if (!incount)
incount = 16;
for (i = 0; i < incount; i++)
if (input_opened)
{
midi_input_intr(my_dev, pas_read(0x178A));
} else
pas_read(0x178A); /* Flush */
}
if (stat & (0x08 | 0x10))
{
spin_lock(&pas_lock);/* called in irq context */
while (qlen && dump_to_midi(tmp_queue[qhead]))
{
qlen--;
qhead++;
}
spin_unlock(&pas_lock);
}
if (stat & 0x40)
{
printk(KERN_WARNING "MIDI output overrun %x,%x\n", pas_read(0x1B89), stat);
}
pas_write(stat, 0x1B88); /* Acknowledge interrupts */
}