..
Kconfig
wl1271: Changed wl1271_sdio to be selectable only on ARM
2010-03-10 17:44:43 -05:00
Makefile
wl1271: Initial SDIO implementation
2010-03-09 15:02:59 -05:00
wl12xx_80211.h
wl1251.h
wl1251: fix ELP_CTRL register accesses when using SDIO
2010-03-15 15:32:03 -04:00
wl1251_acx.c
wl1251_acx.h
wl1251_boot.c
wl1251: reduce eeprom read wait time
2010-03-15 15:32:04 -04:00
wl1251_boot.h
wl1251_cmd.c
wl1251_cmd.h
wl1251_debugfs.c
wl1251_debugfs.h
wl1251_event.c
wl1251_event.h
wl1251_init.c
wl1251_init.h
wl1251_io.c
wl1251_io.h
wl1251: fix ELP_CTRL register accesses when using SDIO
2010-03-15 15:32:03 -04:00
wl1251_main.c
wl1251: fix ELP_CTRL register accesses when using SDIO
2010-03-15 15:32:03 -04:00
wl1251_ps.c
wl1251: fix ELP_CTRL register accesses when using SDIO
2010-03-15 15:32:03 -04:00
wl1251_ps.h
wl1251_reg.h
wl1251_rx.c
wl1251_rx.h
wl1251_sdio.c
wl1251: fix ELP_CTRL register accesses when using SDIO
2010-03-15 15:32:03 -04:00
wl1251_spi.c
wl1251_spi.h
wl1251_tx.c
wl1251_tx.h
wl1271.h
wl1271: Update beacon interval properly for ad-hoc
2010-03-31 14:39:15 -04:00
wl1271_acx.c
wl1271: Enable hardware keep alive messages
2010-03-31 14:39:16 -04:00
wl1271_acx.h
wl1271: Enable hardware keep alive messages
2010-03-31 14:39:16 -04:00
wl1271_boot.c
wl1271: wait for disconnect command complete event
2010-03-31 14:39:14 -04:00
wl1271_boot.h
wl1271: Configure clock-request drive mode to open-drain
2010-03-31 14:39:12 -04:00
wl1271_cmd.c
wl1271: Fix msleep() delay while waiting for completion
2010-03-31 14:39:16 -04:00
wl1271_cmd.h
wl1271: Add keep-alive frame template support
2010-03-31 14:39:16 -04:00
wl1271_conf.h
wl1271: Enable hardware keep alive messages
2010-03-31 14:39:16 -04:00
wl1271_debugfs.c
wl1271: Cleaned up wlan power on/off functions
2010-03-23 16:50:18 -04:00
wl1271_debugfs.h
wl1271_event.c
wl1271: Disconnect if PSM entry fails
2010-03-31 14:39:15 -04:00
wl1271_event.h
wl1271_init.c
wl1271: Enable hardware keep alive messages
2010-03-31 14:39:16 -04:00
wl1271_init.h
wl1271: add most of the normal initialization commands to PLT mode
2010-02-19 15:52:44 -05:00
wl1271_io.c
wl1271: Removed wl1271_spi.h and made some functions static
2010-03-09 15:02:58 -05:00
wl1271_io.h
wl1271: Changed platform_device to be dynamically allocated
2010-03-23 16:50:25 -04:00
wl1271_main.c
wl1271: Enable hardware keep alive messages
2010-03-31 14:39:16 -04:00
wl1271_ps.c
wl1271: Removed wl1271_spi.h and made some functions static
2010-03-09 15:02:58 -05:00
wl1271_ps.h
wl1271: Fix PSM entry
2010-02-19 15:52:42 -05:00
wl1271_reg.h
wl1271_rx.c
wl1271: remove deprecated usage of RX status noise
2010-03-31 14:39:14 -04:00
wl1271_rx.h
wl1271: Clean up RX rate reporting
2010-03-31 14:39:11 -04:00
wl1271_sdio.c
wl1271: Warnings caused by wrong format specifiers fixed
2010-03-31 14:39:13 -04:00
wl1271_spi.c
wl1271: Update busyword checking mechanism
2010-03-31 14:39:13 -04:00
wl1271_testmode.c
wl1271: Removed wl1271_spi.h and made some functions static
2010-03-09 15:02:58 -05:00
wl1271_testmode.h
wl1271: add testmode support
2010-02-19 15:52:47 -05:00
wl1271_tx.c
wl1271: Fix memory leak in firmware crash scenario
2010-03-31 14:39:15 -04:00
wl1271_tx.h
wl1271: Add TX rate reporting
2010-03-31 14:39:11 -04:00