kernel-fxtec-pro1x/arch/arm/mach-pxa
Daniel Mack 31436bbe8f [ARM] pxa/raumfeld: set GPIO drive bits for LED pins
Set GPIO bits to pull the pins connected to LEDs for lower power mode.
We want all LEDs off when devices are in suspend.

Signed-off-by: Daniel Mack <daniel@caiaq.de>
Signed-off-by: Eric Miao <eric.y.miao@gmail.com>
2010-03-02 07:40:59 +08:00
..
include/mach [ARM] pxa/zeus: Add support for mcp2515 CAN bus 2010-03-02 07:40:59 +08:00
am200epd.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
am300epd.c [ARM] 5354/1: mach-pxa: add AM300 platform driver v3 2009-02-10 11:28:00 +00:00
balloon3.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
capc7117.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
clock.c [ARM] 5536/1: Move clk_add_alias() to arch/arm/common/clkdev.c 2009-06-04 17:45:43 +01:00
clock.h [ARM] pxa: remove left-over struct clk *other field from struct clk 2009-09-10 18:49:23 +08:00
cm-x2xx-pci.c [ARM] pxa: use chip->ack() instead of accessing GEDR directly 2010-03-02 07:40:45 +08:00
cm-x2xx-pci.h
cm-x2xx.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
cm-x255.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
cm-x270.c [ARM] pxa/cm-x270: avoid direct access of GPIO/MFP registers 2010-03-02 07:40:48 +08:00
cm-x300.c [ARM] pxa/cm-x300: add PWM backlight support 2009-12-16 16:49:22 +08:00
colibri-pxa3xx.c pxa3xx_nand: move pxa3xx_nand.h common into plat directory 2009-12-01 09:02:43 +08:00
colibri-pxa270.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa300.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
colibri-pxa320.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
corgi.c [ARM] pxa/corgi: fix incorrect default GPIO for UDC Vbus 2010-01-13 21:01:08 +08:00
corgi_lcd.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
corgi_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
corgi_ssp.c [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
cpufreq-pxa2xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
cpufreq-pxa3xx.c [ARM] pxa/cpufreq: fix index assignments for end marker 2009-11-20 14:23:13 -06:00
csb701.c [ARM] pxa/csb701: do not register devices on non-csb726 boads 2009-04-04 10:26:35 +08:00
csb726.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
devices.c [ARM] pxa: fix no reference of cpu_is_pxa25x() in devices.c 2009-12-16 21:35:52 +08:00
devices.h [ARM] pxa: add device definition for graphics controller 2009-09-10 18:49:27 +08:00
e330.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e350.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e400.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
e740.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e750.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
e800.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
em-x270.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
eseries.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
eseries.h [ARM] pxa: Add multi-io support for e-series 2008-12-15 03:29:34 +00:00
ezx.c [ARM] pxa/ezx: add leds-lp3944 support for A910 EZX phone 2009-12-01 09:03:03 +08:00
generic.c [ARM] pxa: move GPIO register definitions into <mach/gpio.h> 2009-03-09 21:22:37 +08:00
generic.h [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
gumstix.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
h5000.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
himalaya.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
hx4700.c [ARM] pxa/hx4700: actually use platform_lcd driver 2009-12-01 09:03:15 +08:00
icontrol.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
idp.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
imote2.c [ARM] pxa/imote2: Remove redundant pin entry for nCS. 2010-03-02 07:40:53 +08:00
irq.c [ARM] pxa: fix irq suspend/resume for pxa25x 2010-01-13 21:01:09 +08:00
Kconfig [ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API 2010-03-02 07:40:52 +08:00
leds-idp.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-lubbock.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds-mainstone.c [ARM] pxa: introduce pxa{25x,27x,300,320,930}.h for board usage 2009-03-09 21:22:36 +08:00
leds.c
leds.h
littleton.c [ARM] pxa/littleton: add UART3 GPIO config 2009-12-29 14:11:28 +08:00
lpd270.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
lubbock.c [ARM] sa1111: allow cascaded IRQs to be used by platforms 2010-03-02 07:40:51 +08:00
magician.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
mainstone.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
Makefile [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
Makefile.boot
mfp-pxa2xx.c [ARM] pxa: enable GPIO receivers after configuring pins 2009-05-18 21:52:09 +08:00
mfp-pxa3xx.c [ARM] pxa: move common MFP handling code into plat-pxa 2009-03-23 10:11:34 +08:00
mioa701.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
mioa701_bootresume.S
mp900.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
mxm8x10.c [ARM] pxa: add support for Embedian MXM-8x10 2010-03-02 07:40:51 +08:00
palmld.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmt5.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtc.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmte2.c [ARM] pxa: simplify the LCD pin configuration for pxa25x platforms 2010-03-02 07:40:46 +08:00
palmtreo.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmtx.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
palmz72.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
pcm027.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
pcm990-baseboard.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
pm.c [ARM] pxa/sharpsl_pm: zaurus needs generic pxa suspend/resume routines 2009-06-11 23:25:09 +08:00
poodle.c [ARM] locomo: allow cascaded IRQ base to be specified by platforms 2010-03-02 07:40:50 +08:00
pxa2xx.c [ARM] pxa: add gpio_pwdown(_inverted) into pxaficp_ir.c 2009-09-10 18:49:39 +08:00
pxa3xx.c [ARM] pxa: add EXT_WAKEUP interrupts handling for pxa3xx 2009-12-01 09:02:58 +08:00
pxa25x.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
pxa27x.c [ARM] pxa: introduce processor specific pxa27x_assert_ac97reset() 2010-03-02 07:40:47 +08:00
pxa300.c [ARM] pxa: add clock definition for graphics controller 2009-09-10 18:49:26 +08:00
pxa320.c [ARM] pxa: add clock definition for graphics controller 2009-09-10 18:49:26 +08:00
pxa930.c [ARM] pxa: support mfp of pxa935 2009-09-10 18:49:24 +08:00
raumfeld.c [ARM] pxa/raumfeld: set GPIO drive bits for LED pins 2010-03-02 07:40:59 +08:00
reset.c [ARM] pxa: allow gpio_reset drive high during normal work 2009-05-18 21:52:09 +08:00
saar.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
sharpsl.h [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
sharpsl_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
sleep.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
smemc.c [ARM] pxa: avoid polluting the kernel's namespace 2008-11-28 16:04:54 +00:00
spitz.c [ARM] pxa: simplify the LCD pin configuration for pxa27x platforms 2010-03-02 07:40:47 +08:00
spitz_pm.c [ARM] pxa/zaurus: rename spitz_battery_levels_* to sharpsl_* 2009-12-01 09:03:01 +08:00
ssp.c [ARM] pxa: introduce PXA_SSP_LEGACY for legacy SSP API 2010-03-02 07:40:52 +08:00
standby.S [ARM] pxa: separate definitions from pxa-regs.h and remove it finally 2009-03-09 21:22:40 +08:00
stargate2.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
tavorevb.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
time.c arm/{pxa,sa1100,nomadik}: Don't disable irqs in set_next_event and set_mode 2010-01-22 17:04:52 +01:00
tosa-bt.c rfkill: rewrite 2009-06-03 14:06:13 -04:00
tosa.c [ARM] pxa/tosa: make use of the matrix keypad driver 2010-03-02 07:40:48 +08:00
trizeps4.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
viper.c [ARM] pxa: add the missing AC97 pin configurations 2010-03-02 07:40:48 +08:00
xcep.c [ARM] pxa: allow platforms to control which uarts are registered 2009-12-01 09:02:55 +08:00
zeus.c [ARM] pxa/zeus: Add support for mcp2515 CAN bus 2010-03-02 07:40:59 +08:00
zylonite.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite_pxa300.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00
zylonite_pxa320.c [ARM] pxa/zylonite: simplify reduntant gpio settings on mmc slot 2009-12-29 14:11:34 +08:00