65ca68b300
Signed-off-by: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "David S. Miller" <davem@davemloft.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jaroslav Kysela <perex@suse.cz> Cc: Takashi Iwai <tiwai@suse.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
1290 lines
29 KiB
C
1290 lines
29 KiB
C
/*
|
|
* sound/sb_common.c
|
|
*
|
|
* Common routines for Sound Blaster compatible cards.
|
|
*
|
|
*
|
|
* Copyright (C) by Hannu Savolainen 1993-1997
|
|
*
|
|
* OSS/Free for Linux is distributed under the GNU GENERAL PUBLIC LICENSE (GPL)
|
|
* Version 2 (June 1991). See the "COPYING" file distributed with this software
|
|
* for more info.
|
|
*
|
|
*
|
|
* Daniel J. Rodriksson: Modified sbintr to handle 8 and 16 bit interrupts
|
|
* for full duplex support ( only sb16 by now )
|
|
* Rolf Fokkens: Added (BETA?) support for ES1887 chips.
|
|
* (fokkensr@vertis.nl) Which means: You can adjust the recording levels.
|
|
*
|
|
* 2000/01/18 - separated sb_card and sb_common -
|
|
* Jeff Garzik <jgarzik@pobox.com>
|
|
*
|
|
* 2000/09/18 - got rid of attach_uart401
|
|
* Arnaldo Carvalho de Melo <acme@conectiva.com.br>
|
|
*
|
|
* 2001/01/26 - replaced CLI/STI with spinlocks
|
|
* Chris Rankin <rankinc@zipworld.com.au>
|
|
*/
|
|
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/spinlock.h>
|
|
|
|
#include "sound_config.h"
|
|
#include "sound_firmware.h"
|
|
|
|
#include "mpu401.h"
|
|
|
|
#include "sb_mixer.h"
|
|
#include "sb.h"
|
|
#include "sb_ess.h"
|
|
|
|
/*
|
|
* global module flag
|
|
*/
|
|
|
|
int sb_be_quiet;
|
|
|
|
static sb_devc *detected_devc; /* For communication from probe to init */
|
|
static sb_devc *last_devc; /* For MPU401 initialization */
|
|
|
|
static unsigned char jazz_irq_bits[] = {
|
|
0, 0, 2, 3, 0, 1, 0, 4, 0, 2, 5, 0, 0, 0, 0, 6
|
|
};
|
|
|
|
static unsigned char jazz_dma_bits[] = {
|
|
0, 1, 0, 2, 0, 3, 0, 4
|
|
};
|
|
|
|
void *smw_free;
|
|
|
|
/*
|
|
* Jazz16 chipset specific control variables
|
|
*/
|
|
|
|
static int jazz16_base; /* Not detected */
|
|
static unsigned char jazz16_bits; /* I/O relocation bits */
|
|
static DEFINE_SPINLOCK(jazz16_lock);
|
|
|
|
/*
|
|
* Logitech Soundman Wave specific initialization code
|
|
*/
|
|
|
|
#ifdef SMW_MIDI0001_INCLUDED
|
|
#include "smw-midi0001.h"
|
|
#else
|
|
static unsigned char *smw_ucode;
|
|
static int smw_ucodeLen;
|
|
|
|
#endif
|
|
|
|
static sb_devc *last_sb; /* Last sb loaded */
|
|
|
|
int sb_dsp_command(sb_devc * devc, unsigned char val)
|
|
{
|
|
int i;
|
|
unsigned long limit;
|
|
|
|
limit = jiffies + HZ / 10; /* Timeout */
|
|
|
|
/*
|
|
* Note! the i<500000 is an emergency exit. The sb_dsp_command() is sometimes
|
|
* called while interrupts are disabled. This means that the timer is
|
|
* disabled also. However the timeout situation is a abnormal condition.
|
|
* Normally the DSP should be ready to accept commands after just couple of
|
|
* loops.
|
|
*/
|
|
|
|
for (i = 0; i < 500000 && (limit-jiffies)>0; i++)
|
|
{
|
|
if ((inb(DSP_STATUS) & 0x80) == 0)
|
|
{
|
|
outb((val), DSP_COMMAND);
|
|
return 1;
|
|
}
|
|
}
|
|
printk(KERN_WARNING "Sound Blaster: DSP command(%x) timeout.\n", val);
|
|
return 0;
|
|
}
|
|
|
|
int sb_dsp_get_byte(sb_devc * devc)
|
|
{
|
|
int i;
|
|
|
|
for (i = 1000; i; i--)
|
|
{
|
|
if (inb(DSP_DATA_AVAIL) & 0x80)
|
|
return inb(DSP_READ);
|
|
}
|
|
return 0xffff;
|
|
}
|
|
|
|
static void sb_intr (sb_devc *devc)
|
|
{
|
|
int status;
|
|
unsigned char src = 0xff;
|
|
|
|
if (devc->model == MDL_SB16)
|
|
{
|
|
src = sb_getmixer(devc, IRQ_STAT); /* Interrupt source register */
|
|
|
|
if (src & 4) /* MPU401 interrupt */
|
|
if(devc->midi_irq_cookie)
|
|
uart401intr(devc->irq, devc->midi_irq_cookie, NULL);
|
|
|
|
if (!(src & 3))
|
|
return; /* Not a DSP interrupt */
|
|
}
|
|
if (devc->intr_active && (!devc->fullduplex || (src & 0x01)))
|
|
{
|
|
switch (devc->irq_mode)
|
|
{
|
|
case IMODE_OUTPUT:
|
|
DMAbuf_outputintr(devc->dev, 1);
|
|
break;
|
|
|
|
case IMODE_INPUT:
|
|
DMAbuf_inputintr(devc->dev);
|
|
break;
|
|
|
|
case IMODE_INIT:
|
|
break;
|
|
|
|
case IMODE_MIDI:
|
|
sb_midi_interrupt(devc);
|
|
break;
|
|
|
|
default:
|
|
/* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
|
|
;
|
|
}
|
|
}
|
|
else if (devc->intr_active_16 && (src & 0x02))
|
|
{
|
|
switch (devc->irq_mode_16)
|
|
{
|
|
case IMODE_OUTPUT:
|
|
DMAbuf_outputintr(devc->dev, 1);
|
|
break;
|
|
|
|
case IMODE_INPUT:
|
|
DMAbuf_inputintr(devc->dev);
|
|
break;
|
|
|
|
case IMODE_INIT:
|
|
break;
|
|
|
|
default:
|
|
/* printk(KERN_WARN "Sound Blaster: Unexpected interrupt\n"); */
|
|
;
|
|
}
|
|
}
|
|
/*
|
|
* Acknowledge interrupts
|
|
*/
|
|
|
|
if (src & 0x01)
|
|
status = inb(DSP_DATA_AVAIL);
|
|
|
|
if (devc->model == MDL_SB16 && src & 0x02)
|
|
status = inb(DSP_DATA_AVL16);
|
|
}
|
|
|
|
static void pci_intr(sb_devc *devc)
|
|
{
|
|
int src = inb(devc->pcibase+0x1A);
|
|
src&=3;
|
|
if(src)
|
|
sb_intr(devc);
|
|
}
|
|
|
|
static irqreturn_t sbintr(int irq, void *dev_id, struct pt_regs *dummy)
|
|
{
|
|
sb_devc *devc = dev_id;
|
|
|
|
devc->irq_ok = 1;
|
|
|
|
switch (devc->model) {
|
|
case MDL_ESSPCI:
|
|
pci_intr (devc);
|
|
break;
|
|
|
|
case MDL_ESS:
|
|
ess_intr (devc);
|
|
break;
|
|
default:
|
|
sb_intr (devc);
|
|
break;
|
|
}
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
int sb_dsp_reset(sb_devc * devc)
|
|
{
|
|
int loopc;
|
|
|
|
DEB(printk("Entered sb_dsp_reset()\n"));
|
|
|
|
if (devc->model == MDL_ESS) return ess_dsp_reset (devc);
|
|
|
|
/* This is only for non-ESS chips */
|
|
|
|
outb(1, DSP_RESET);
|
|
|
|
udelay(10);
|
|
outb(0, DSP_RESET);
|
|
udelay(30);
|
|
|
|
for (loopc = 0; loopc < 1000 && !(inb(DSP_DATA_AVAIL) & 0x80); loopc++);
|
|
|
|
if (inb(DSP_READ) != 0xAA)
|
|
{
|
|
DDB(printk("sb: No response to RESET\n"));
|
|
return 0; /* Sorry */
|
|
}
|
|
|
|
DEB(printk("sb_dsp_reset() OK\n"));
|
|
|
|
return 1;
|
|
}
|
|
|
|
static void dsp_get_vers(sb_devc * devc)
|
|
{
|
|
int i;
|
|
|
|
unsigned long flags;
|
|
|
|
DDB(printk("Entered dsp_get_vers()\n"));
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
devc->major = devc->minor = 0;
|
|
sb_dsp_command(devc, 0xe1); /* Get version */
|
|
|
|
for (i = 100000; i; i--)
|
|
{
|
|
if (inb(DSP_DATA_AVAIL) & 0x80)
|
|
{
|
|
if (devc->major == 0)
|
|
devc->major = inb(DSP_READ);
|
|
else
|
|
{
|
|
devc->minor = inb(DSP_READ);
|
|
break;
|
|
}
|
|
}
|
|
}
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
DDB(printk("DSP version %d.%02d\n", devc->major, devc->minor));
|
|
}
|
|
|
|
static int sb16_set_dma_hw(sb_devc * devc)
|
|
{
|
|
int bits;
|
|
|
|
if (devc->dma8 != 0 && devc->dma8 != 1 && devc->dma8 != 3)
|
|
{
|
|
printk(KERN_ERR "SB16: Invalid 8 bit DMA (%d)\n", devc->dma8);
|
|
return 0;
|
|
}
|
|
bits = (1 << devc->dma8);
|
|
|
|
if (devc->dma16 >= 5 && devc->dma16 <= 7)
|
|
bits |= (1 << devc->dma16);
|
|
|
|
sb_setmixer(devc, DMA_NR, bits);
|
|
return 1;
|
|
}
|
|
|
|
static void sb16_set_mpu_port(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
/*
|
|
* This routine initializes new MIDI port setup register of SB Vibra (CT2502).
|
|
*/
|
|
unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06;
|
|
|
|
switch (hw_config->io_base)
|
|
{
|
|
case 0x300:
|
|
sb_setmixer(devc, 0x84, bits | 0x04);
|
|
break;
|
|
|
|
case 0x330:
|
|
sb_setmixer(devc, 0x84, bits | 0x00);
|
|
break;
|
|
|
|
default:
|
|
sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */
|
|
printk(KERN_ERR "SB16: Invalid MIDI I/O port %x\n", hw_config->io_base);
|
|
}
|
|
}
|
|
|
|
static int sb16_set_irq_hw(sb_devc * devc, int level)
|
|
{
|
|
int ival;
|
|
|
|
switch (level)
|
|
{
|
|
case 5:
|
|
ival = 2;
|
|
break;
|
|
case 7:
|
|
ival = 4;
|
|
break;
|
|
case 9:
|
|
ival = 1;
|
|
break;
|
|
case 10:
|
|
ival = 8;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "SB16: Invalid IRQ%d\n", level);
|
|
return 0;
|
|
}
|
|
sb_setmixer(devc, IRQ_NR, ival);
|
|
return 1;
|
|
}
|
|
|
|
static void relocate_Jazz16(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
unsigned char bits = 0;
|
|
unsigned long flags;
|
|
|
|
if (jazz16_base != 0 && jazz16_base != hw_config->io_base)
|
|
return;
|
|
|
|
switch (hw_config->io_base)
|
|
{
|
|
case 0x220:
|
|
bits = 1;
|
|
break;
|
|
case 0x240:
|
|
bits = 2;
|
|
break;
|
|
case 0x260:
|
|
bits = 3;
|
|
break;
|
|
default:
|
|
return;
|
|
}
|
|
bits = jazz16_bits = bits << 5;
|
|
jazz16_base = hw_config->io_base;
|
|
|
|
/*
|
|
* Magic wake up sequence by writing to 0x201 (aka Joystick port)
|
|
*/
|
|
spin_lock_irqsave(&jazz16_lock, flags);
|
|
outb((0xAF), 0x201);
|
|
outb((0x50), 0x201);
|
|
outb((bits), 0x201);
|
|
spin_unlock_irqrestore(&jazz16_lock, flags);
|
|
}
|
|
|
|
static int init_Jazz16(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
char name[100];
|
|
/*
|
|
* First try to check that the card has Jazz16 chip. It identifies itself
|
|
* by returning 0x12 as response to DSP command 0xfa.
|
|
*/
|
|
|
|
if (!sb_dsp_command(devc, 0xfa))
|
|
return 0;
|
|
|
|
if (sb_dsp_get_byte(devc) != 0x12)
|
|
return 0;
|
|
|
|
/*
|
|
* OK so far. Now configure the IRQ and DMA channel used by the card.
|
|
*/
|
|
if (hw_config->irq < 1 || hw_config->irq > 15 || jazz_irq_bits[hw_config->irq] == 0)
|
|
{
|
|
printk(KERN_ERR "Jazz16: Invalid interrupt (IRQ%d)\n", hw_config->irq);
|
|
return 0;
|
|
}
|
|
if (hw_config->dma < 0 || hw_config->dma > 3 || jazz_dma_bits[hw_config->dma] == 0)
|
|
{
|
|
printk(KERN_ERR "Jazz16: Invalid 8 bit DMA (DMA%d)\n", hw_config->dma);
|
|
return 0;
|
|
}
|
|
if (hw_config->dma2 < 0)
|
|
{
|
|
printk(KERN_ERR "Jazz16: No 16 bit DMA channel defined\n");
|
|
return 0;
|
|
}
|
|
if (hw_config->dma2 < 5 || hw_config->dma2 > 7 || jazz_dma_bits[hw_config->dma2] == 0)
|
|
{
|
|
printk(KERN_ERR "Jazz16: Invalid 16 bit DMA (DMA%d)\n", hw_config->dma2);
|
|
return 0;
|
|
}
|
|
devc->dma16 = hw_config->dma2;
|
|
|
|
if (!sb_dsp_command(devc, 0xfb))
|
|
return 0;
|
|
|
|
if (!sb_dsp_command(devc, jazz_dma_bits[hw_config->dma] |
|
|
(jazz_dma_bits[hw_config->dma2] << 4)))
|
|
return 0;
|
|
|
|
if (!sb_dsp_command(devc, jazz_irq_bits[hw_config->irq]))
|
|
return 0;
|
|
|
|
/*
|
|
* Now we have configured a standard Jazz16 device.
|
|
*/
|
|
devc->model = MDL_JAZZ;
|
|
strcpy(name, "Jazz16");
|
|
|
|
hw_config->name = "Jazz16";
|
|
devc->caps |= SB_NO_MIDI;
|
|
return 1;
|
|
}
|
|
|
|
static void relocate_ess1688(sb_devc * devc)
|
|
{
|
|
unsigned char bits;
|
|
|
|
switch (devc->base)
|
|
{
|
|
case 0x220:
|
|
bits = 0x04;
|
|
break;
|
|
case 0x230:
|
|
bits = 0x05;
|
|
break;
|
|
case 0x240:
|
|
bits = 0x06;
|
|
break;
|
|
case 0x250:
|
|
bits = 0x07;
|
|
break;
|
|
default:
|
|
return; /* Wrong port */
|
|
}
|
|
|
|
DDB(printk("Doing ESS1688 address selection\n"));
|
|
|
|
/*
|
|
* ES1688 supports two alternative ways for software address config.
|
|
* First try the so called Read-Sequence-Key method.
|
|
*/
|
|
|
|
/* Reset the sequence logic */
|
|
inb(0x229);
|
|
inb(0x229);
|
|
inb(0x229);
|
|
|
|
/* Perform the read sequence */
|
|
inb(0x22b);
|
|
inb(0x229);
|
|
inb(0x22b);
|
|
inb(0x229);
|
|
inb(0x229);
|
|
inb(0x22b);
|
|
inb(0x229);
|
|
|
|
/* Select the base address by reading from it. Then probe using the port. */
|
|
inb(devc->base);
|
|
if (sb_dsp_reset(devc)) /* Bingo */
|
|
return;
|
|
|
|
#if 0 /* This causes system lockups (Nokia 386/25 at least) */
|
|
/*
|
|
* The last resort is the system control register method.
|
|
*/
|
|
|
|
outb((0x00), 0xfb); /* 0xFB is the unlock register */
|
|
outb((0x00), 0xe0); /* Select index 0 */
|
|
outb((bits), 0xe1); /* Write the config bits */
|
|
outb((0x00), 0xf9); /* 0xFB is the lock register */
|
|
#endif
|
|
}
|
|
|
|
int sb_dsp_detect(struct address_info *hw_config, int pci, int pciio, struct sb_module_options *sbmo)
|
|
{
|
|
sb_devc sb_info;
|
|
sb_devc *devc = &sb_info;
|
|
|
|
memset((char *) &sb_info, 0, sizeof(sb_info)); /* Zero everything */
|
|
|
|
/* Copy module options in place */
|
|
if(sbmo) memcpy(&devc->sbmo, sbmo, sizeof(struct sb_module_options));
|
|
|
|
sb_info.my_mididev = -1;
|
|
sb_info.my_mixerdev = -1;
|
|
sb_info.dev = -1;
|
|
|
|
/*
|
|
* Initialize variables
|
|
*/
|
|
|
|
DDB(printk("sb_dsp_detect(%x) entered\n", hw_config->io_base));
|
|
|
|
spin_lock_init(&devc->lock);
|
|
devc->type = hw_config->card_subtype;
|
|
|
|
devc->base = hw_config->io_base;
|
|
devc->irq = hw_config->irq;
|
|
devc->dma8 = hw_config->dma;
|
|
|
|
devc->dma16 = -1;
|
|
devc->pcibase = pciio;
|
|
|
|
if(pci == SB_PCI_ESSMAESTRO)
|
|
{
|
|
devc->model = MDL_ESSPCI;
|
|
devc->caps |= SB_PCI_IRQ;
|
|
hw_config->driver_use_1 |= SB_PCI_IRQ;
|
|
hw_config->card_subtype = MDL_ESSPCI;
|
|
}
|
|
|
|
if(pci == SB_PCI_YAMAHA)
|
|
{
|
|
devc->model = MDL_YMPCI;
|
|
devc->caps |= SB_PCI_IRQ;
|
|
hw_config->driver_use_1 |= SB_PCI_IRQ;
|
|
hw_config->card_subtype = MDL_YMPCI;
|
|
|
|
printk("Yamaha PCI mode.\n");
|
|
}
|
|
|
|
if (devc->sbmo.acer)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x0b);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x0b);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x0b);
|
|
inb(devc->base + 0x09);
|
|
inb(devc->base + 0x00);
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
}
|
|
/*
|
|
* Detect the device
|
|
*/
|
|
|
|
if (sb_dsp_reset(devc))
|
|
dsp_get_vers(devc);
|
|
else
|
|
devc->major = 0;
|
|
|
|
if (devc->type == 0 || devc->type == MDL_JAZZ || devc->type == MDL_SMW)
|
|
if (devc->major == 0 || (devc->major == 3 && devc->minor == 1))
|
|
relocate_Jazz16(devc, hw_config);
|
|
|
|
if (devc->major == 0 && (devc->type == MDL_ESS || devc->type == 0))
|
|
relocate_ess1688(devc);
|
|
|
|
if (!sb_dsp_reset(devc))
|
|
{
|
|
DDB(printk("SB reset failed\n"));
|
|
#ifdef MODULE
|
|
printk(KERN_INFO "sb: dsp reset failed.\n");
|
|
#endif
|
|
return 0;
|
|
}
|
|
if (devc->major == 0)
|
|
dsp_get_vers(devc);
|
|
|
|
if (devc->major == 3 && devc->minor == 1)
|
|
{
|
|
if (devc->type == MDL_AZTECH) /* SG Washington? */
|
|
{
|
|
if (sb_dsp_command(devc, 0x09))
|
|
if (sb_dsp_command(devc, 0x00)) /* Enter WSS mode */
|
|
{
|
|
int i;
|
|
|
|
/* Have some delay */
|
|
for (i = 0; i < 10000; i++)
|
|
inb(DSP_DATA_AVAIL);
|
|
devc->caps = SB_NO_AUDIO | SB_NO_MIDI; /* Mixer only */
|
|
devc->model = MDL_AZTECH;
|
|
}
|
|
}
|
|
}
|
|
|
|
if(devc->type == MDL_ESSPCI)
|
|
devc->model = MDL_ESSPCI;
|
|
|
|
if(devc->type == MDL_YMPCI)
|
|
{
|
|
printk("YMPCI selected\n");
|
|
devc->model = MDL_YMPCI;
|
|
}
|
|
|
|
/*
|
|
* Save device information for sb_dsp_init()
|
|
*/
|
|
|
|
|
|
detected_devc = (sb_devc *)kmalloc(sizeof(sb_devc), GFP_KERNEL);
|
|
if (detected_devc == NULL)
|
|
{
|
|
printk(KERN_ERR "sb: Can't allocate memory for device information\n");
|
|
return 0;
|
|
}
|
|
memcpy(detected_devc, devc, sizeof(sb_devc));
|
|
MDB(printk(KERN_INFO "SB %d.%02d detected OK (%x)\n", devc->major, devc->minor, hw_config->io_base));
|
|
return 1;
|
|
}
|
|
|
|
int sb_dsp_init(struct address_info *hw_config, struct module *owner)
|
|
{
|
|
sb_devc *devc;
|
|
char name[100];
|
|
extern int sb_be_quiet;
|
|
int mixer22, mixer30;
|
|
|
|
/*
|
|
* Check if we had detected a SB device earlier
|
|
*/
|
|
DDB(printk("sb_dsp_init(%x) entered\n", hw_config->io_base));
|
|
name[0] = 0;
|
|
|
|
if (detected_devc == NULL)
|
|
{
|
|
MDB(printk("No detected device\n"));
|
|
return 0;
|
|
}
|
|
devc = detected_devc;
|
|
detected_devc = NULL;
|
|
|
|
if (devc->base != hw_config->io_base)
|
|
{
|
|
DDB(printk("I/O port mismatch\n"));
|
|
release_region(devc->base, 16);
|
|
return 0;
|
|
}
|
|
/*
|
|
* Now continue initialization of the device
|
|
*/
|
|
|
|
devc->caps = hw_config->driver_use_1;
|
|
|
|
if (!((devc->caps & SB_NO_AUDIO) && (devc->caps & SB_NO_MIDI)) && hw_config->irq > 0)
|
|
{ /* IRQ setup */
|
|
|
|
/*
|
|
* ESS PCI cards do shared PCI IRQ stuff. Since they
|
|
* will get shared PCI irq lines we must cope.
|
|
*/
|
|
|
|
int i=(devc->caps&SB_PCI_IRQ)?IRQF_SHARED:0;
|
|
|
|
if (request_irq(hw_config->irq, sbintr, i, "soundblaster", devc) < 0)
|
|
{
|
|
printk(KERN_ERR "SB: Can't allocate IRQ%d\n", hw_config->irq);
|
|
release_region(devc->base, 16);
|
|
return 0;
|
|
}
|
|
devc->irq_ok = 0;
|
|
|
|
if (devc->major == 4)
|
|
if (!sb16_set_irq_hw(devc, devc->irq)) /* Unsupported IRQ */
|
|
{
|
|
free_irq(devc->irq, devc);
|
|
release_region(devc->base, 16);
|
|
return 0;
|
|
}
|
|
if ((devc->type == 0 || devc->type == MDL_ESS) &&
|
|
devc->major == 3 && devc->minor == 1)
|
|
{ /* Handle various chipsets which claim they are SB Pro compatible */
|
|
if ((devc->type != 0 && devc->type != MDL_ESS) ||
|
|
!ess_init(devc, hw_config))
|
|
{
|
|
if ((devc->type != 0 && devc->type != MDL_JAZZ &&
|
|
devc->type != MDL_SMW) || !init_Jazz16(devc, hw_config))
|
|
{
|
|
DDB(printk("This is a genuine SB Pro\n"));
|
|
}
|
|
}
|
|
}
|
|
if (devc->major == 4 && devc->minor <= 11 ) /* Won't work */
|
|
devc->irq_ok = 1;
|
|
else
|
|
{
|
|
int n;
|
|
|
|
for (n = 0; n < 3 && devc->irq_ok == 0; n++)
|
|
{
|
|
if (sb_dsp_command(devc, 0xf2)) /* Cause interrupt immediately */
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; !devc->irq_ok && i < 10000; i++);
|
|
}
|
|
}
|
|
if (!devc->irq_ok)
|
|
printk(KERN_WARNING "sb: Interrupt test on IRQ%d failed - Probable IRQ conflict\n", devc->irq);
|
|
else
|
|
{
|
|
DDB(printk("IRQ test OK (IRQ%d)\n", devc->irq));
|
|
}
|
|
}
|
|
} /* IRQ setup */
|
|
|
|
last_sb = devc;
|
|
|
|
switch (devc->major)
|
|
{
|
|
case 1: /* SB 1.0 or 1.5 */
|
|
devc->model = hw_config->card_subtype = MDL_SB1;
|
|
break;
|
|
|
|
case 2: /* SB 2.x */
|
|
if (devc->minor == 0)
|
|
devc->model = hw_config->card_subtype = MDL_SB2;
|
|
else
|
|
devc->model = hw_config->card_subtype = MDL_SB201;
|
|
break;
|
|
|
|
case 3: /* SB Pro and most clones */
|
|
switch (devc->model) {
|
|
case 0:
|
|
devc->model = hw_config->card_subtype = MDL_SBPRO;
|
|
if (hw_config->name == NULL)
|
|
hw_config->name = "Sound Blaster Pro (8 BIT ONLY)";
|
|
break;
|
|
case MDL_ESS:
|
|
ess_dsp_init(devc, hw_config);
|
|
break;
|
|
}
|
|
break;
|
|
|
|
case 4:
|
|
devc->model = hw_config->card_subtype = MDL_SB16;
|
|
/*
|
|
* ALS007 and ALS100 return DSP version 4.2 and have 2 post-reset !=0
|
|
* registers at 0x3c and 0x4c (output ctrl registers on ALS007) whereas
|
|
* a "standard" SB16 doesn't have a register at 0x4c. ALS100 actively
|
|
* updates register 0x22 whenever 0x30 changes, as per the SB16 spec.
|
|
* Since ALS007 doesn't, this can be used to differentiate the 2 cards.
|
|
*/
|
|
if ((devc->minor == 2) && sb_getmixer(devc,0x3c) && sb_getmixer(devc,0x4c))
|
|
{
|
|
mixer30 = sb_getmixer(devc,0x30);
|
|
sb_setmixer(devc,0x22,(mixer22=sb_getmixer(devc,0x22)) & 0x0f);
|
|
sb_setmixer(devc,0x30,0xff);
|
|
/* ALS100 will force 0x30 to 0xf8 like SB16; ALS007 will allow 0xff. */
|
|
/* Register 0x22 & 0xf0 on ALS100 == 0xf0; on ALS007 it == 0x10. */
|
|
if ((sb_getmixer(devc,0x30) != 0xff) || ((sb_getmixer(devc,0x22) & 0xf0) != 0x10))
|
|
{
|
|
devc->submodel = SUBMDL_ALS100;
|
|
if (hw_config->name == NULL)
|
|
hw_config->name = "Sound Blaster 16 (ALS-100)";
|
|
}
|
|
else
|
|
{
|
|
sb_setmixer(devc,0x3c,0x1f); /* Enable all inputs */
|
|
sb_setmixer(devc,0x4c,0x1f);
|
|
sb_setmixer(devc,0x22,mixer22); /* Restore 0x22 to original value */
|
|
devc->submodel = SUBMDL_ALS007;
|
|
if (hw_config->name == NULL)
|
|
hw_config->name = "Sound Blaster 16 (ALS-007)";
|
|
}
|
|
sb_setmixer(devc,0x30,mixer30);
|
|
}
|
|
else if (hw_config->name == NULL)
|
|
hw_config->name = "Sound Blaster 16";
|
|
|
|
if (hw_config->dma2 == -1)
|
|
devc->dma16 = devc->dma8;
|
|
else if (hw_config->dma2 < 5 || hw_config->dma2 > 7)
|
|
{
|
|
printk(KERN_WARNING "SB16: Bad or missing 16 bit DMA channel\n");
|
|
devc->dma16 = devc->dma8;
|
|
}
|
|
else
|
|
devc->dma16 = hw_config->dma2;
|
|
|
|
if(!sb16_set_dma_hw(devc)) {
|
|
free_irq(devc->irq, devc);
|
|
release_region(hw_config->io_base, 16);
|
|
return 0;
|
|
}
|
|
|
|
devc->caps |= SB_NO_MIDI;
|
|
}
|
|
|
|
if (!(devc->caps & SB_NO_MIXER))
|
|
if (devc->major == 3 || devc->major == 4)
|
|
sb_mixer_init(devc, owner);
|
|
|
|
if (!(devc->caps & SB_NO_MIDI))
|
|
sb_dsp_midi_init(devc, owner);
|
|
|
|
if (hw_config->name == NULL)
|
|
hw_config->name = "Sound Blaster (8 BIT/MONO ONLY)";
|
|
|
|
sprintf(name, "%s (%d.%02d)", hw_config->name, devc->major, devc->minor);
|
|
conf_printf(name, hw_config);
|
|
|
|
/*
|
|
* Assuming that a sound card is Sound Blaster (compatible) is the most common
|
|
* configuration error and the mother of all problems. Usually sound cards
|
|
* emulate SB Pro but in addition they have a 16 bit native mode which should be
|
|
* used in Unix. See Readme.cards for more information about configuring OSS/Free
|
|
* properly.
|
|
*/
|
|
if (devc->model <= MDL_SBPRO)
|
|
{
|
|
if (devc->major == 3 && devc->minor != 1) /* "True" SB Pro should have v3.1 (rare ones may have 3.2). */
|
|
{
|
|
printk(KERN_INFO "This sound card may not be fully Sound Blaster Pro compatible.\n");
|
|
printk(KERN_INFO "In many cases there is another way to configure OSS so that\n");
|
|
printk(KERN_INFO "it works properly with OSS (for example in 16 bit mode).\n");
|
|
printk(KERN_INFO "Please ignore this message if you _really_ have a SB Pro.\n");
|
|
}
|
|
else if (!sb_be_quiet && devc->model == MDL_SBPRO)
|
|
{
|
|
printk(KERN_INFO "SB DSP version is just %d.%02d which means that your card is\n", devc->major, devc->minor);
|
|
printk(KERN_INFO "several years old (8 bit only device) or alternatively the sound driver\n");
|
|
printk(KERN_INFO "is incorrectly configured.\n");
|
|
}
|
|
}
|
|
hw_config->card_subtype = devc->model;
|
|
hw_config->slots[0]=devc->dev;
|
|
last_devc = devc; /* For SB MPU detection */
|
|
|
|
if (!(devc->caps & SB_NO_AUDIO) && devc->dma8 >= 0)
|
|
{
|
|
if (sound_alloc_dma(devc->dma8, "SoundBlaster8"))
|
|
{
|
|
printk(KERN_WARNING "Sound Blaster: Can't allocate 8 bit DMA channel %d\n", devc->dma8);
|
|
}
|
|
if (devc->dma16 >= 0 && devc->dma16 != devc->dma8)
|
|
{
|
|
if (sound_alloc_dma(devc->dma16, "SoundBlaster16"))
|
|
printk(KERN_WARNING "Sound Blaster: can't allocate 16 bit DMA channel %d.\n", devc->dma16);
|
|
}
|
|
sb_audio_init(devc, name, owner);
|
|
hw_config->slots[0]=devc->dev;
|
|
}
|
|
else
|
|
{
|
|
MDB(printk("Sound Blaster: no audio devices found.\n"));
|
|
}
|
|
return 1;
|
|
}
|
|
|
|
/* if (sbmpu) below we allow mpu401 to manage the midi devs
|
|
otherwise we have to unload them. (Andrzej Krzysztofowicz) */
|
|
|
|
void sb_dsp_unload(struct address_info *hw_config, int sbmpu)
|
|
{
|
|
sb_devc *devc;
|
|
|
|
devc = audio_devs[hw_config->slots[0]]->devc;
|
|
|
|
if (devc && devc->base == hw_config->io_base)
|
|
{
|
|
if ((devc->model & MDL_ESS) && devc->pcibase)
|
|
release_region(devc->pcibase, 8);
|
|
|
|
release_region(devc->base, 16);
|
|
|
|
if (!(devc->caps & SB_NO_AUDIO))
|
|
{
|
|
sound_free_dma(devc->dma8);
|
|
if (devc->dma16 >= 0)
|
|
sound_free_dma(devc->dma16);
|
|
}
|
|
if (!(devc->caps & SB_NO_AUDIO && devc->caps & SB_NO_MIDI))
|
|
{
|
|
if (devc->irq > 0)
|
|
free_irq(devc->irq, devc);
|
|
|
|
sb_mixer_unload(devc);
|
|
/* We don't have to do this bit any more the UART401 is its own
|
|
master -- Krzysztof Halasa */
|
|
/* But we have to do it, if UART401 is not detected */
|
|
if (!sbmpu)
|
|
sound_unload_mididev(devc->my_mididev);
|
|
sound_unload_audiodev(devc->dev);
|
|
}
|
|
kfree(devc);
|
|
}
|
|
else
|
|
release_region(hw_config->io_base, 16);
|
|
|
|
kfree(detected_devc);
|
|
}
|
|
|
|
/*
|
|
* Mixer access routines
|
|
*
|
|
* ES1887 modifications: some mixer registers reside in the
|
|
* range above 0xa0. These must be accessed in another way.
|
|
*/
|
|
|
|
void sb_setmixer(sb_devc * devc, unsigned int port, unsigned int value)
|
|
{
|
|
unsigned long flags;
|
|
|
|
if (devc->model == MDL_ESS) {
|
|
ess_setmixer (devc, port, value);
|
|
return;
|
|
}
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
|
|
outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
|
|
udelay(20);
|
|
outb(((unsigned char) (value & 0xff)), MIXER_DATA);
|
|
udelay(20);
|
|
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
}
|
|
|
|
unsigned int sb_getmixer(sb_devc * devc, unsigned int port)
|
|
{
|
|
unsigned int val;
|
|
unsigned long flags;
|
|
|
|
if (devc->model == MDL_ESS) return ess_getmixer (devc, port);
|
|
|
|
spin_lock_irqsave(&devc->lock, flags);
|
|
|
|
outb(((unsigned char) (port & 0xff)), MIXER_ADDR);
|
|
udelay(20);
|
|
val = inb(MIXER_DATA);
|
|
udelay(20);
|
|
|
|
spin_unlock_irqrestore(&devc->lock, flags);
|
|
|
|
return val;
|
|
}
|
|
|
|
void sb_chgmixer
|
|
(sb_devc * devc, unsigned int reg, unsigned int mask, unsigned int val)
|
|
{
|
|
int value;
|
|
|
|
value = sb_getmixer(devc, reg);
|
|
value = (value & ~mask) | (val & mask);
|
|
sb_setmixer(devc, reg, value);
|
|
}
|
|
|
|
/*
|
|
* MPU401 MIDI initialization.
|
|
*/
|
|
|
|
static void smw_putmem(sb_devc * devc, int base, int addr, unsigned char val)
|
|
{
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */
|
|
|
|
outb((addr & 0xff), base + 1); /* Low address bits */
|
|
outb((addr >> 8), base + 2); /* High address bits */
|
|
outb((val), base); /* Data */
|
|
|
|
spin_unlock_irqrestore(&jazz16_lock, flags);
|
|
}
|
|
|
|
static unsigned char smw_getmem(sb_devc * devc, int base, int addr)
|
|
{
|
|
unsigned long flags;
|
|
unsigned char val;
|
|
|
|
spin_lock_irqsave(&jazz16_lock, flags); /* NOT the SB card? */
|
|
|
|
outb((addr & 0xff), base + 1); /* Low address bits */
|
|
outb((addr >> 8), base + 2); /* High address bits */
|
|
val = inb(base); /* Data */
|
|
|
|
spin_unlock_irqrestore(&jazz16_lock, flags);
|
|
return val;
|
|
}
|
|
|
|
static int smw_midi_init(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
int mpu_base = hw_config->io_base;
|
|
int mp_base = mpu_base + 4; /* Microcontroller base */
|
|
int i;
|
|
unsigned char control;
|
|
|
|
|
|
/*
|
|
* Reset the microcontroller so that the RAM can be accessed
|
|
*/
|
|
|
|
control = inb(mpu_base + 7);
|
|
outb((control | 3), mpu_base + 7); /* Set last two bits to 1 (?) */
|
|
outb(((control & 0xfe) | 2), mpu_base + 7); /* xxxxxxx0 resets the mc */
|
|
|
|
mdelay(3); /* Wait at least 1ms */
|
|
|
|
outb((control & 0xfc), mpu_base + 7); /* xxxxxx00 enables RAM */
|
|
|
|
/*
|
|
* Detect microcontroller by probing the 8k RAM area
|
|
*/
|
|
smw_putmem(devc, mp_base, 0, 0x00);
|
|
smw_putmem(devc, mp_base, 1, 0xff);
|
|
udelay(10);
|
|
|
|
if (smw_getmem(devc, mp_base, 0) != 0x00 || smw_getmem(devc, mp_base, 1) != 0xff)
|
|
{
|
|
DDB(printk("SM Wave: No microcontroller RAM detected (%02x, %02x)\n", smw_getmem(devc, mp_base, 0), smw_getmem(devc, mp_base, 1)));
|
|
return 0; /* No RAM */
|
|
}
|
|
/*
|
|
* There is RAM so assume it's really a SM Wave
|
|
*/
|
|
|
|
devc->model = MDL_SMW;
|
|
smw_mixer_init(devc);
|
|
|
|
#ifdef MODULE
|
|
if (!smw_ucode)
|
|
{
|
|
smw_ucodeLen = mod_firmware_load("/etc/sound/midi0001.bin", (void *) &smw_ucode);
|
|
smw_free = smw_ucode;
|
|
}
|
|
#endif
|
|
if (smw_ucodeLen > 0)
|
|
{
|
|
if (smw_ucodeLen != 8192)
|
|
{
|
|
printk(KERN_ERR "SM Wave: Invalid microcode (MIDI0001.BIN) length\n");
|
|
return 1;
|
|
}
|
|
/*
|
|
* Download microcode
|
|
*/
|
|
|
|
for (i = 0; i < 8192; i++)
|
|
smw_putmem(devc, mp_base, i, smw_ucode[i]);
|
|
|
|
/*
|
|
* Verify microcode
|
|
*/
|
|
|
|
for (i = 0; i < 8192; i++)
|
|
if (smw_getmem(devc, mp_base, i) != smw_ucode[i])
|
|
{
|
|
printk(KERN_ERR "SM Wave: Microcode verification failed\n");
|
|
return 0;
|
|
}
|
|
}
|
|
control = 0;
|
|
#ifdef SMW_SCSI_IRQ
|
|
/*
|
|
* Set the SCSI interrupt (IRQ2/9, IRQ3 or IRQ10). The SCSI interrupt
|
|
* is disabled by default.
|
|
*
|
|
* FIXME - make this a module option
|
|
*
|
|
* BTW the Zilog 5380 SCSI controller is located at MPU base + 0x10.
|
|
*/
|
|
{
|
|
static unsigned char scsi_irq_bits[] = {
|
|
0, 0, 3, 1, 0, 0, 0, 0, 0, 3, 2, 0, 0, 0, 0, 0
|
|
};
|
|
control |= scsi_irq_bits[SMW_SCSI_IRQ] << 6;
|
|
}
|
|
#endif
|
|
|
|
#ifdef SMW_OPL4_ENABLE
|
|
/*
|
|
* Make the OPL4 chip visible on the PC bus at 0x380.
|
|
*
|
|
* There is no need to enable this feature since this driver
|
|
* doesn't support OPL4 yet. Also there is no RAM in SM Wave so
|
|
* enabling OPL4 is pretty useless.
|
|
*/
|
|
control |= 0x10; /* Uses IRQ12 if bit 0x20 == 0 */
|
|
/* control |= 0x20; Uncomment this if you want to use IRQ7 */
|
|
#endif
|
|
outb((control | 0x03), mpu_base + 7); /* xxxxxx11 restarts */
|
|
hw_config->name = "SoundMan Wave";
|
|
return 1;
|
|
}
|
|
|
|
static int init_Jazz16_midi(sb_devc * devc, struct address_info *hw_config)
|
|
{
|
|
int mpu_base = hw_config->io_base;
|
|
int sb_base = devc->base;
|
|
int irq = hw_config->irq;
|
|
|
|
unsigned char bits = 0;
|
|
unsigned long flags;
|
|
|
|
if (irq < 0)
|
|
irq *= -1;
|
|
|
|
if (irq < 1 || irq > 15 ||
|
|
jazz_irq_bits[irq] == 0)
|
|
{
|
|
printk(KERN_ERR "Jazz16: Invalid MIDI interrupt (IRQ%d)\n", irq);
|
|
return 0;
|
|
}
|
|
switch (sb_base)
|
|
{
|
|
case 0x220:
|
|
bits = 1;
|
|
break;
|
|
case 0x240:
|
|
bits = 2;
|
|
break;
|
|
case 0x260:
|
|
bits = 3;
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
bits = jazz16_bits = bits << 5;
|
|
switch (mpu_base)
|
|
{
|
|
case 0x310:
|
|
bits |= 1;
|
|
break;
|
|
case 0x320:
|
|
bits |= 2;
|
|
break;
|
|
case 0x330:
|
|
bits |= 3;
|
|
break;
|
|
default:
|
|
printk(KERN_ERR "Jazz16: Invalid MIDI I/O port %x\n", mpu_base);
|
|
return 0;
|
|
}
|
|
/*
|
|
* Magic wake up sequence by writing to 0x201 (aka Joystick port)
|
|
*/
|
|
spin_lock_irqsave(&jazz16_lock, flags);
|
|
outb(0xAF, 0x201);
|
|
outb(0x50, 0x201);
|
|
outb(bits, 0x201);
|
|
spin_unlock_irqrestore(&jazz16_lock, flags);
|
|
|
|
hw_config->name = "Jazz16";
|
|
smw_midi_init(devc, hw_config);
|
|
|
|
if (!sb_dsp_command(devc, 0xfb))
|
|
return 0;
|
|
|
|
if (!sb_dsp_command(devc, jazz_dma_bits[devc->dma8] |
|
|
(jazz_dma_bits[devc->dma16] << 4)))
|
|
return 0;
|
|
|
|
if (!sb_dsp_command(devc, jazz_irq_bits[devc->irq] |
|
|
(jazz_irq_bits[irq] << 4)))
|
|
return 0;
|
|
|
|
return 1;
|
|
}
|
|
|
|
int probe_sbmpu(struct address_info *hw_config, struct module *owner)
|
|
{
|
|
sb_devc *devc = last_devc;
|
|
int ret;
|
|
|
|
if (last_devc == NULL)
|
|
return 0;
|
|
|
|
last_devc = NULL;
|
|
|
|
if (hw_config->io_base <= 0)
|
|
{
|
|
/* The real vibra16 is fine about this, but we have to go
|
|
wipe up after Cyrix again */
|
|
|
|
if(devc->model == MDL_SB16 && devc->minor >= 12)
|
|
{
|
|
unsigned char bits = sb_getmixer(devc, 0x84) & ~0x06;
|
|
sb_setmixer(devc, 0x84, bits | 0x02); /* Disable MPU */
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
#if defined(CONFIG_SOUND_MPU401)
|
|
if (devc->model == MDL_ESS)
|
|
{
|
|
struct resource *ports;
|
|
ports = request_region(hw_config->io_base, 2, "mpu401");
|
|
if (!ports) {
|
|
printk(KERN_ERR "sbmpu: I/O port conflict (%x)\n", hw_config->io_base);
|
|
return 0;
|
|
}
|
|
if (!ess_midi_init(devc, hw_config)) {
|
|
release_region(hw_config->io_base, 2);
|
|
return 0;
|
|
}
|
|
hw_config->name = "ESS1xxx MPU";
|
|
devc->midi_irq_cookie = NULL;
|
|
if (!probe_mpu401(hw_config, ports)) {
|
|
release_region(hw_config->io_base, 2);
|
|
return 0;
|
|
}
|
|
attach_mpu401(hw_config, owner);
|
|
if (last_sb->irq == -hw_config->irq)
|
|
last_sb->midi_irq_cookie=(void *)hw_config->slots[1];
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
switch (devc->model)
|
|
{
|
|
case MDL_SB16:
|
|
if (hw_config->io_base != 0x300 && hw_config->io_base != 0x330)
|
|
{
|
|
printk(KERN_ERR "SB16: Invalid MIDI port %x\n", hw_config->io_base);
|
|
return 0;
|
|
}
|
|
hw_config->name = "Sound Blaster 16";
|
|
if (hw_config->irq < 3 || hw_config->irq == devc->irq)
|
|
hw_config->irq = -devc->irq;
|
|
if (devc->minor > 12) /* What is Vibra's version??? */
|
|
sb16_set_mpu_port(devc, hw_config);
|
|
break;
|
|
|
|
case MDL_JAZZ:
|
|
if (hw_config->irq < 3 || hw_config->irq == devc->irq)
|
|
hw_config->irq = -devc->irq;
|
|
if (!init_Jazz16_midi(devc, hw_config))
|
|
return 0;
|
|
break;
|
|
|
|
case MDL_YMPCI:
|
|
hw_config->name = "Yamaha PCI Legacy";
|
|
printk("Yamaha PCI legacy UART401 check.\n");
|
|
break;
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
ret = probe_uart401(hw_config, owner);
|
|
if (ret)
|
|
last_sb->midi_irq_cookie=midi_devs[hw_config->slots[4]]->devc;
|
|
return ret;
|
|
}
|
|
|
|
void unload_sbmpu(struct address_info *hw_config)
|
|
{
|
|
#if defined(CONFIG_SOUND_MPU401)
|
|
if (!strcmp (hw_config->name, "ESS1xxx MPU")) {
|
|
unload_mpu401(hw_config);
|
|
return;
|
|
}
|
|
#endif
|
|
unload_uart401(hw_config);
|
|
}
|
|
|
|
EXPORT_SYMBOL(sb_dsp_init);
|
|
EXPORT_SYMBOL(sb_dsp_detect);
|
|
EXPORT_SYMBOL(sb_dsp_unload);
|
|
EXPORT_SYMBOL(sb_be_quiet);
|
|
EXPORT_SYMBOL(probe_sbmpu);
|
|
EXPORT_SYMBOL(unload_sbmpu);
|
|
EXPORT_SYMBOL(smw_free);
|
|
MODULE_LICENSE("GPL");
|