Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/scripts/Makefile.build
Tejun Heo 551559e13a kbuild: implement modules.order 
When multiple built-in modules (especially drivers) provide the same
capability, they're prioritized by link order specified by the order
listed in Makefile.  This implicit ordering is lost for loadable
modules.

When driver modules are loaded by udev, what comes first in
modules.alias file is selected.  However, the order in this file is
indeterministic (depends on filesystem listing order of installed
modules).  This causes confusion.

The solution is two-parted.  This patch updates kbuild such that it
generates and installs modules.order which contains the name of
modules ordered according to Makefile.  The second part is update to
depmod such that it generates output files according to this file.

Note that both obj-y and obj-m subdirs can contain modules and
ordering information between those two are lost from beginning.
Currently obj-y subdirs are put before obj-m subdirs.

Sam Ravnborg cleaned up Makefile modifications and suggested using awk
to remove duplicate lines from modules.order instead of using separate
C program.

Signed-off-by: Tejun Heo <htejun@gmail.com>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Cc: Bill Nottingham <notting@redhat.com>
Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Kay Sievers <kay.sievers@vrfy.org>
Cc: Jon Masters <jonathan@jonmasters.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
2008-01-28 23:14:35 +01:00

368 lines
11 KiB
Text
Raw Blame History

# ==========================================================================
# Building
# ==========================================================================
src := $(obj)
PHONY := __build
__build:
# Init all relevant variables used in kbuild files so
# 1) they have correct type
# 2) they do not inherit any value from the environment
obj-y :=
obj-m :=
lib-y :=
lib-m :=
always :=
targets :=
subdir-y :=
subdir-m :=
EXTRA_AFLAGS :=
EXTRA_CFLAGS :=
EXTRA_CPPFLAGS :=
EXTRA_LDFLAGS :=
asflags-y :=
ccflags-y :=
cppflags-y :=
ldflags-y :=
# Read .config if it exist, otherwise ignore
-include include/config/auto.conf
include scripts/Kbuild.include
# For backward compatibility check that these variables does not change
save-cflags := $(CFLAGS)
# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
kbuild-file := $(if $(wildcard $(kbuild-dir)/Kbuild),$(kbuild-dir)/Kbuild,$(kbuild-dir)/Makefile)
include $(kbuild-file)
# If the save-* variables changed error out
ifeq ($(KBUILD_NOPEDANTIC),)
ifneq ("$(save-cflags)","$(CFLAGS)")
$(error CFLAGS was changed in "$(kbuild-file)". Fix it to use EXTRA_CFLAGS)
endif
endif
include scripts/Makefile.lib
ifdef host-progs
ifneq ($(hostprogs-y),$(host-progs))
$(warning kbuild: $(obj)/Makefile - Usage of host-progs is deprecated. Please replace with hostprogs-y!)
hostprogs-y += $(host-progs)
endif
endif
# Do not include host rules unles needed
ifneq ($(hostprogs-y)$(hostprogs-m),)
include scripts/Makefile.host
endif
ifneq ($(KBUILD_SRC),)
# Create output directory if not already present
_dummy := $(shell [ -d $(obj) ] || mkdir -p $(obj))
# Create directories for object files if directory does not exist
# Needed when obj-y := dir/file.o syntax is used
_dummy := $(foreach d,$(obj-dirs), $(shell [ -d $(d) ] || mkdir -p $(d)))
endif
ifndef obj
$(warning kbuild: Makefile.build is included improperly)
endif
# ===========================================================================
ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
lib-target := $(obj)/lib.a
endif
ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
modorder-target := $(obj)/modules.order
# We keep a list of all modules in $(MODVERDIR)
__build: $(if $(KBUILD_BUILTIN),$(builtin-target) $(lib-target) $(extra-y)) \
$(if $(KBUILD_MODULES),$(obj-m) $(modorder-target)) \
$(subdir-ym) $(always)
@:
# Linus' kernel sanity checking tool
ifneq ($(KBUILD_CHECKSRC),0)
ifeq ($(KBUILD_CHECKSRC),2)
quiet_cmd_force_checksrc = CHECK $<
cmd_force_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
else
quiet_cmd_checksrc = CHECK $<
cmd_checksrc = $(CHECK) $(CHECKFLAGS) $(c_flags) $< ;
endif
endif
# Compile C sources (.c)
# ---------------------------------------------------------------------------
# Default is built-in, unless we know otherwise
modkern_cflags := $(CFLAGS_KERNEL)
quiet_modtag := $(empty) $(empty)
$(real-objs-m) : modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m:.o=.i) : modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m:.o=.s) : modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m:.o=.lst): modkern_cflags := $(CFLAGS_MODULE)
$(real-objs-m) : quiet_modtag := [M]
$(real-objs-m:.o=.i) : quiet_modtag := [M]
$(real-objs-m:.o=.s) : quiet_modtag := [M]
$(real-objs-m:.o=.lst): quiet_modtag := [M]
$(obj-m) : quiet_modtag := [M]
# Default for not multi-part modules
modname = $(basetarget)
$(multi-objs-m) : modname = $(modname-multi)
$(multi-objs-m:.o=.i) : modname = $(modname-multi)
$(multi-objs-m:.o=.s) : modname = $(modname-multi)
$(multi-objs-m:.o=.lst) : modname = $(modname-multi)
$(multi-objs-y) : modname = $(modname-multi)
$(multi-objs-y:.o=.i) : modname = $(modname-multi)
$(multi-objs-y:.o=.s) : modname = $(modname-multi)
$(multi-objs-y:.o=.lst) : modname = $(modname-multi)
quiet_cmd_cc_s_c = CC $(quiet_modtag) $@
cmd_cc_s_c = $(CC) $(c_flags) -fverbose-asm -S -o $@ $<
$(obj)/%.s: $(src)/%.c FORCE
$(call if_changed_dep,cc_s_c)
quiet_cmd_cc_i_c = CPP $(quiet_modtag) $@
cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $<
$(obj)/%.i: $(src)/%.c FORCE
$(call if_changed_dep,cc_i_c)
quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@
cmd_cc_symtypes_c = \
$(CPP) -D__GENKSYMS__ $(c_flags) $< \
| $(GENKSYMS) -T $@ >/dev/null; \
test -s $@ || rm -f $@
$(obj)/%.symtypes : $(src)/%.c FORCE
$(call if_changed_dep,cc_symtypes_c)
# C (.c) files
# The C file is compiled and updated dependency information is generated.
# (See cmd_cc_o_c + relevant part of rule_cc_o_c)
quiet_cmd_cc_o_c = CC $(quiet_modtag) $@
ifndef CONFIG_MODVERSIONS
cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
else
# When module versioning is enabled the following steps are executed:
# o compile a .tmp_<file>.o from <file>.c
# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does
# not export symbols, we just rename .tmp_<file>.o to <file>.o and
# are done.
# o otherwise, we calculate symbol versions using the good old
# genksyms on the preprocessed source and postprocess them in a way
# that they are usable as a linker script
# o generate <file>.o from .tmp_<file>.o using the linker to
# replace the unresolved symbols __crc_exported_symbol with
# the actual value of the checksum generated by genksyms
cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $<
cmd_modversions = \
if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \
$(CPP) -D__GENKSYMS__ $(c_flags) $< \
| $(GENKSYMS) $(if $(KBUILD_SYMTYPES), \
-T $(@D)/$(@F:.o=.symtypes)) -a $(ARCH) \
> $(@D)/.tmp_$(@F:.o=.ver); \
\
$(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \
-T $(@D)/.tmp_$(@F:.o=.ver); \
rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \
else \
mv -f $(@D)/.tmp_$(@F) $@; \
fi;
endif
define rule_cc_o_c
$(call echo-cmd,checksrc) $(cmd_checksrc) \
$(call echo-cmd,cc_o_c) $(cmd_cc_o_c); \
$(cmd_modversions) \
scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \
$(dot-target).tmp; \
rm -f $(depfile); \
mv -f $(dot-target).tmp $(dot-target).cmd
endef
# Built-in and composite module parts
$(obj)/%.o: $(src)/%.c FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
# Single-part modules are special since we need to mark them in $(MODVERDIR)
$(single-used-m): $(obj)/%.o: $(src)/%.c FORCE
$(call cmd,force_checksrc)
$(call if_changed_rule,cc_o_c)
@{ echo $(@:.o=.ko); echo $@; } > $(MODVERDIR)/$(@F:.o=.mod)
quiet_cmd_cc_lst_c = MKLST $@
cmd_cc_lst_c = $(CC) $(c_flags) -g -c -o $*.o $< && \
$(CONFIG_SHELL) $(srctree)/scripts/makelst $*.o \
System.map $(OBJDUMP) > $@
$(obj)/%.lst: $(src)/%.c FORCE
$(call if_changed_dep,cc_lst_c)
# Compile assembler sources (.S)
# ---------------------------------------------------------------------------
modkern_aflags := $(AFLAGS_KERNEL)
$(real-objs-m) : modkern_aflags := $(AFLAGS_MODULE)
$(real-objs-m:.o=.s): modkern_aflags := $(AFLAGS_MODULE)
quiet_cmd_as_s_S = CPP $(quiet_modtag) $@
cmd_as_s_S = $(CPP) $(a_flags) -o $@ $<
$(obj)/%.s: $(src)/%.S FORCE
$(call if_changed_dep,as_s_S)
quiet_cmd_as_o_S = AS $(quiet_modtag) $@
cmd_as_o_S = $(CC) $(a_flags) -c -o $@ $<
$(obj)/%.o: $(src)/%.S FORCE
$(call if_changed_dep,as_o_S)
targets += $(real-objs-y) $(real-objs-m) $(lib-y)
targets += $(extra-y) $(MAKECMDGOALS) $(always)
# Linker scripts preprocessor (.lds.S -> .lds)
# ---------------------------------------------------------------------------
quiet_cmd_cpp_lds_S = LDS $@
cmd_cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ -o $@ $<
$(obj)/%.lds: $(src)/%.lds.S FORCE
$(call if_changed_dep,cpp_lds_S)
# Build the compiled-in targets
# ---------------------------------------------------------------------------
# To build objects in subdirs, we need to descend into the directories
$(sort $(subdir-obj-y)): $(subdir-ym) ;
#
# Rule to compile a set of .o files into one .o file
#
ifdef builtin-target
quiet_cmd_link_o_target = LD $@
# If the list of objects to link is empty, just create an empty built-in.o
cmd_link_o_target = $(if $(strip $(obj-y)),\
$(LD) $(ld_flags) -r -o $@ $(filter $(obj-y), $^),\
rm -f $@; $(AR) rcs $@)
$(builtin-target): $(obj-y) FORCE
$(call if_changed,link_o_target)
targets += $(builtin-target)
endif # builtin-target
#
# Rule to create modules.order file
#
# Create commands to either record .ko file or cat modules.order from
# a subdirectory
modorder-cmds = \
$(foreach m, $(modorder), \
$(if $(filter %/modules.order, $m), \
cat $m;, echo kernel/$m;))
$(modorder-target): $(subdir-ym) FORCE
$(Q)(cat /dev/null; $(modorder-cmds)) > $@
#
# Rule to compile a set of .o files into one .a file
#
ifdef lib-target
quiet_cmd_link_l_target = AR $@
cmd_link_l_target = rm -f $@; $(AR) rcs $@ $(lib-y)
$(lib-target): $(lib-y) FORCE
$(call if_changed,link_l_target)
targets += $(lib-target)
endif
#
# Rule to link composite objects
#
# Composite objects are specified in kbuild makefile as follows:
# <composite-object>-objs := <list of .o files>
# or
# <composite-object>-y := <list of .o files>
link_multi_deps = \
$(filter $(addprefix $(obj)/, \
$($(subst $(obj)/,,$(@:.o=-objs))) \
$($(subst $(obj)/,,$(@:.o=-y)))), $^)
quiet_cmd_link_multi-y = LD $@
cmd_link_multi-y = $(LD) $(ld_flags) -r -o $@ $(link_multi_deps)
quiet_cmd_link_multi-m = LD [M] $@
cmd_link_multi-m = $(cmd_link_multi-y)
# We would rather have a list of rules like
# foo.o: $(foo-objs)
# but that's not so easy, so we rather make all composite objects depend
# on the set of all their parts
$(multi-used-y) : %.o: $(multi-objs-y) FORCE
$(call if_changed,link_multi-y)
$(multi-used-m) : %.o: $(multi-objs-m) FORCE
$(call if_changed,link_multi-m)
@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
targets += $(multi-used-y) $(multi-used-m)
# Descending
# ---------------------------------------------------------------------------
PHONY += $(subdir-ym)
$(subdir-ym):
$(Q)$(MAKE) $(build)=$@
# Add FORCE to the prequisites of a target to force it to be always rebuilt.
# ---------------------------------------------------------------------------
PHONY += FORCE
FORCE:
# Read all saved command lines and dependencies for the $(targets) we
# may be building above, using $(if_changed{,_dep}). As an
# optimization, we don't need to read them if the target does not
# exist, we will rebuild anyway in that case.
targets := $(wildcard $(sort $(targets)))
cmd_files := $(wildcard $(foreach f,$(targets),$(dir $(f)).$(notdir $(f)).cmd))
ifneq ($(cmd_files),)
include $(cmd_files)
endif
# Declare the contents of the .PHONY variable as phony. We keep that
# information in a variable se we can use it in if_changed and friends.
.PHONY: $(PHONY)
Reference in a new issue View git blame Copy permalink