kernel-fxtec-pro1x/drivers/media/dvb/dvb-core
Simon Arlott 45145b67f5 [media] dvb-core: fix DVBFE_ALGO_HW retune bug
Commit 7e07222 breaks DVBFE_ALGO_HW tuning after a retune is requested,
which causes bad tuning on my TBS 6920.

[    0.769091] pci 0000:06:00.0: [14f1:8852] type 0 class 0x000400
[   19.733530] CORE cx23885[0]: subsystem: 6920:8888, board: TurboSight TBS 6920 [card=14,autodetected]
[  762.824912] cx24116_load_firmware: FW version 1.23.86.1

7e0722215a [media] dvb-core: Don't pass DVBv3 parameters on tune() fops

Although re_tune is set to true when FESTATE_RETUNE occurs, it is never
set back to false which the old code used to do when !FESTATE_RETUNE.

This patch sets re_tune to false if !(state & FESTATE_RETUNE).

$ szap-s2 -a 2 "Channel 5"
reading channels from file '/home/simon/.szap/channels.conf'
zapping to 247 'Channel 5':
delivery DVB-S, modulation QPSK
sat 0, frequency 10964 MHz H, symbolrate 22000000, coderate 5/6, rolloff 0.35
vpid 0x092a, apid 0x092b, sid 0x092d
using '/dev/dvb/adapter2/frontend0' and '/dev/dvb/adapter2/demux0'
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eb33 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cf40 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cec0 | snr eccd | ber 00000000 | unc 00000000 | FE_HAS_LOCK
status 1f | signal cec0 | snr 0000 | ber 00000000 | unc 00000000 | FE_HAS_LOCK

Signed-off-by: Simon Arlott <simon@fire.lp0.eu>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2012-02-14 17:15:25 -02:00
..
demux.h
dmxdev.c [media] dmxdev: Fix a compilation warning due to a bad type 2010-12-29 08:17:13 -02:00
dmxdev.h
dvb_ca_en50221.c [media] dvb_ca_en50221: fix compilation breakage 2012-01-10 19:15:45 -02:00
dvb_ca_en50221.h
dvb_demux.c [media] Speed up DVB TS stream delivery from DMA buffer into dvb-core's buffer 2011-05-20 09:28:48 -03:00
dvb_demux.h
dvb_filter.c
dvb_filter.h
dvb_frontend.c [media] dvb-core: fix DVBFE_ALGO_HW retune bug 2012-02-14 17:15:25 -02:00
dvb_frontend.h [media] dvb-core: define general callback value for demodulator 2012-01-10 22:58:39 -02:00
dvb_math.c
dvb_math.h
dvb_net.c [media] DVB: dvb_net_init: return -errno on error 2012-01-06 12:40:46 -02:00
dvb_net.h dvb_net: Simplify the code if DVB NET is not defined 2011-07-27 17:52:20 -03:00
dvb_ringbuffer.c
dvb_ringbuffer.h
dvbdev.c switch device_get_devnode() and ->devnode() to umode_t * 2012-01-03 22:54:55 -05:00
dvbdev.h
Makefile [media] Make DVB NET configurable in the kernel 2011-07-27 17:52:20 -03:00