kernel-fxtec-pro1x/drivers/net/cxgb3/mc5.c
Divy Le Ray 1d68e93d65 cxgb3 - Add dual licensing
Dual licensing, needed for OFED 1.2

Signed-off-by: Divy Le Ray <divy@chelsio.com>
Signed-off-by: Jeff Garzik <jeff@garzik.org>
2007-02-05 16:58:51 -05:00

473 lines
14 KiB
C

/*
* Copyright (c) 2003-2007 Chelsio, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*/
#include "common.h"
#include "regs.h"
enum {
IDT75P52100 = 4,
IDT75N43102 = 5
};
/* DBGI command mode */
enum {
DBGI_MODE_MBUS = 0,
DBGI_MODE_IDT52100 = 5
};
/* IDT 75P52100 commands */
#define IDT_CMD_READ 0
#define IDT_CMD_WRITE 1
#define IDT_CMD_SEARCH 2
#define IDT_CMD_LEARN 3
/* IDT LAR register address and value for 144-bit mode (low 32 bits) */
#define IDT_LAR_ADR0 0x180006
#define IDT_LAR_MODE144 0xffff0000
/* IDT SCR and SSR addresses (low 32 bits) */
#define IDT_SCR_ADR0 0x180000
#define IDT_SSR0_ADR0 0x180002
#define IDT_SSR1_ADR0 0x180004
/* IDT GMR base address (low 32 bits) */
#define IDT_GMR_BASE_ADR0 0x180020
/* IDT data and mask array base addresses (low 32 bits) */
#define IDT_DATARY_BASE_ADR0 0
#define IDT_MSKARY_BASE_ADR0 0x80000
/* IDT 75N43102 commands */
#define IDT4_CMD_SEARCH144 3
#define IDT4_CMD_WRITE 4
#define IDT4_CMD_READ 5
/* IDT 75N43102 SCR address (low 32 bits) */
#define IDT4_SCR_ADR0 0x3
/* IDT 75N43102 GMR base addresses (low 32 bits) */
#define IDT4_GMR_BASE0 0x10
#define IDT4_GMR_BASE1 0x20
#define IDT4_GMR_BASE2 0x30
/* IDT 75N43102 data and mask array base addresses (low 32 bits) */
#define IDT4_DATARY_BASE_ADR0 0x1000000
#define IDT4_MSKARY_BASE_ADR0 0x2000000
#define MAX_WRITE_ATTEMPTS 5
#define MAX_ROUTES 2048
/*
* Issue a command to the TCAM and wait for its completion. The address and
* any data required by the command must have been setup by the caller.
*/
static int mc5_cmd_write(struct adapter *adapter, u32 cmd)
{
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_CMD, cmd);
return t3_wait_op_done(adapter, A_MC5_DB_DBGI_RSP_STATUS,
F_DBGIRSPVALID, 1, MAX_WRITE_ATTEMPTS, 1);
}
static inline void dbgi_wr_addr3(struct adapter *adapter, u32 v1, u32 v2,
u32 v3)
{
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, v1);
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR1, v2);
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR2, v3);
}
static inline void dbgi_wr_data3(struct adapter *adapter, u32 v1, u32 v2,
u32 v3)
{
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA0, v1);
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA1, v2);
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_DATA2, v3);
}
static inline void dbgi_rd_rsp3(struct adapter *adapter, u32 *v1, u32 *v2,
u32 *v3)
{
*v1 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA0);
*v2 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA1);
*v3 = t3_read_reg(adapter, A_MC5_DB_DBGI_RSP_DATA2);
}
/*
* Write data to the TCAM register at address (0, 0, addr_lo) using the TCAM
* command cmd. The data to be written must have been set up by the caller.
* Returns -1 on failure, 0 on success.
*/
static int mc5_write(struct adapter *adapter, u32 addr_lo, u32 cmd)
{
t3_write_reg(adapter, A_MC5_DB_DBGI_REQ_ADDR0, addr_lo);
if (mc5_cmd_write(adapter, cmd) == 0)
return 0;
CH_ERR(adapter, "MC5 timeout writing to TCAM address 0x%x\n",
addr_lo);
return -1;
}
static int init_mask_data_array(struct mc5 *mc5, u32 mask_array_base,
u32 data_array_base, u32 write_cmd,
int addr_shift)
{
unsigned int i;
struct adapter *adap = mc5->adapter;
/*
* We need the size of the TCAM data and mask arrays in terms of
* 72-bit entries.
*/
unsigned int size72 = mc5->tcam_size;
unsigned int server_base = t3_read_reg(adap, A_MC5_DB_SERVER_INDEX);
if (mc5->mode == MC5_MODE_144_BIT) {
size72 *= 2; /* 1 144-bit entry is 2 72-bit entries */
server_base *= 2;
}
/* Clear the data array */
dbgi_wr_data3(adap, 0, 0, 0);
for (i = 0; i < size72; i++)
if (mc5_write(adap, data_array_base + (i << addr_shift),
write_cmd))
return -1;
/* Initialize the mask array. */
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
for (i = 0; i < size72; i++) {
if (i == server_base) /* entering server or routing region */
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_DATA0,
mc5->mode == MC5_MODE_144_BIT ?
0xfffffff9 : 0xfffffffd);
if (mc5_write(adap, mask_array_base + (i << addr_shift),
write_cmd))
return -1;
}
return 0;
}
static int init_idt52100(struct mc5 *mc5)
{
int i;
struct adapter *adap = mc5->adapter;
t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
V_RDLAT(0x15) | V_LRNLAT(0x15) | V_SRCHLAT(0x15));
t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 2);
/*
* Use GMRs 14-15 for ELOOKUP, GMRs 12-13 for SYN lookups, and
* GMRs 8-9 for ACK- and AOPEN searches.
*/
t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT_CMD_WRITE);
t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT_CMD_WRITE);
t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD, IDT_CMD_SEARCH);
t3_write_reg(adap, A_MC5_DB_AOPEN_LRN_CMD, IDT_CMD_LEARN);
t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT_CMD_SEARCH | 0x6000);
t3_write_reg(adap, A_MC5_DB_SYN_LRN_CMD, IDT_CMD_LEARN);
t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT_CMD_SEARCH);
t3_write_reg(adap, A_MC5_DB_ACK_LRN_CMD, IDT_CMD_LEARN);
t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT_CMD_SEARCH);
t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT_CMD_SEARCH | 0x7000);
t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT_CMD_WRITE);
t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT_CMD_READ);
/* Set DBGI command mode for IDT TCAM. */
t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
/* Set up LAR */
dbgi_wr_data3(adap, IDT_LAR_MODE144, 0, 0);
if (mc5_write(adap, IDT_LAR_ADR0, IDT_CMD_WRITE))
goto err;
/* Set up SSRs */
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0);
if (mc5_write(adap, IDT_SSR0_ADR0, IDT_CMD_WRITE) ||
mc5_write(adap, IDT_SSR1_ADR0, IDT_CMD_WRITE))
goto err;
/* Set up GMRs */
for (i = 0; i < 32; ++i) {
if (i >= 12 && i < 15)
dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
else if (i == 15)
dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
else
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
if (mc5_write(adap, IDT_GMR_BASE_ADR0 + i, IDT_CMD_WRITE))
goto err;
}
/* Set up SCR */
dbgi_wr_data3(adap, 1, 0, 0);
if (mc5_write(adap, IDT_SCR_ADR0, IDT_CMD_WRITE))
goto err;
return init_mask_data_array(mc5, IDT_MSKARY_BASE_ADR0,
IDT_DATARY_BASE_ADR0, IDT_CMD_WRITE, 0);
err:
return -EIO;
}
static int init_idt43102(struct mc5 *mc5)
{
int i;
struct adapter *adap = mc5->adapter;
t3_write_reg(adap, A_MC5_DB_RSP_LATENCY,
adap->params.rev == 0 ? V_RDLAT(0xd) | V_SRCHLAT(0x11) :
V_RDLAT(0xd) | V_SRCHLAT(0x12));
/*
* Use GMRs 24-25 for ELOOKUP, GMRs 20-21 for SYN lookups, and no mask
* for ACK- and AOPEN searches.
*/
t3_write_reg(adap, A_MC5_DB_POPEN_DATA_WR_CMD, IDT4_CMD_WRITE);
t3_write_reg(adap, A_MC5_DB_POPEN_MASK_WR_CMD, IDT4_CMD_WRITE);
t3_write_reg(adap, A_MC5_DB_AOPEN_SRCH_CMD,
IDT4_CMD_SEARCH144 | 0x3800);
t3_write_reg(adap, A_MC5_DB_SYN_SRCH_CMD, IDT4_CMD_SEARCH144);
t3_write_reg(adap, A_MC5_DB_ACK_SRCH_CMD, IDT4_CMD_SEARCH144 | 0x3800);
t3_write_reg(adap, A_MC5_DB_ILOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x3800);
t3_write_reg(adap, A_MC5_DB_ELOOKUP_CMD, IDT4_CMD_SEARCH144 | 0x800);
t3_write_reg(adap, A_MC5_DB_DATA_WRITE_CMD, IDT4_CMD_WRITE);
t3_write_reg(adap, A_MC5_DB_DATA_READ_CMD, IDT4_CMD_READ);
t3_write_reg(adap, A_MC5_DB_PART_ID_INDEX, 3);
/* Set DBGI command mode for IDT TCAM. */
t3_write_reg(adap, A_MC5_DB_DBGI_CONFIG, DBGI_MODE_IDT52100);
/* Set up GMRs */
dbgi_wr_data3(adap, 0xffffffff, 0xffffffff, 0xff);
for (i = 0; i < 7; ++i)
if (mc5_write(adap, IDT4_GMR_BASE0 + i, IDT4_CMD_WRITE))
goto err;
for (i = 0; i < 4; ++i)
if (mc5_write(adap, IDT4_GMR_BASE2 + i, IDT4_CMD_WRITE))
goto err;
dbgi_wr_data3(adap, 0xfffffff9, 0xffffffff, 0xff);
if (mc5_write(adap, IDT4_GMR_BASE1, IDT4_CMD_WRITE) ||
mc5_write(adap, IDT4_GMR_BASE1 + 1, IDT4_CMD_WRITE) ||
mc5_write(adap, IDT4_GMR_BASE1 + 4, IDT4_CMD_WRITE))
goto err;
dbgi_wr_data3(adap, 0xfffffff9, 0xffff8007, 0xff);
if (mc5_write(adap, IDT4_GMR_BASE1 + 5, IDT4_CMD_WRITE))
goto err;
/* Set up SCR */
dbgi_wr_data3(adap, 0xf0000000, 0, 0);
if (mc5_write(adap, IDT4_SCR_ADR0, IDT4_CMD_WRITE))
goto err;
return init_mask_data_array(mc5, IDT4_MSKARY_BASE_ADR0,
IDT4_DATARY_BASE_ADR0, IDT4_CMD_WRITE, 1);
err:
return -EIO;
}
/* Put MC5 in DBGI mode. */
static inline void mc5_dbgi_mode_enable(const struct mc5 *mc5)
{
t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_DBGIEN);
}
/* Put MC5 in M-Bus mode. */
static void mc5_dbgi_mode_disable(const struct mc5 *mc5)
{
t3_write_reg(mc5->adapter, A_MC5_DB_CONFIG,
V_TMMODE(mc5->mode == MC5_MODE_72_BIT) |
V_COMPEN(mc5->mode == MC5_MODE_72_BIT) |
V_PRTYEN(mc5->parity_enabled) | F_MBUSEN);
}
/*
* Initialization that requires the OS and protocol layers to already
* be intialized goes here.
*/
int t3_mc5_init(struct mc5 *mc5, unsigned int nservers, unsigned int nfilters,
unsigned int nroutes)
{
u32 cfg;
int err;
unsigned int tcam_size = mc5->tcam_size;
struct adapter *adap = mc5->adapter;
if (nroutes > MAX_ROUTES || nroutes + nservers + nfilters > tcam_size)
return -EINVAL;
/* Reset the TCAM */
cfg = t3_read_reg(adap, A_MC5_DB_CONFIG) & ~F_TMMODE;
cfg |= V_TMMODE(mc5->mode == MC5_MODE_72_BIT) | F_TMRST;
t3_write_reg(adap, A_MC5_DB_CONFIG, cfg);
if (t3_wait_op_done(adap, A_MC5_DB_CONFIG, F_TMRDY, 1, 500, 0)) {
CH_ERR(adap, "TCAM reset timed out\n");
return -1;
}
t3_write_reg(adap, A_MC5_DB_ROUTING_TABLE_INDEX, tcam_size - nroutes);
t3_write_reg(adap, A_MC5_DB_FILTER_TABLE,
tcam_size - nroutes - nfilters);
t3_write_reg(adap, A_MC5_DB_SERVER_INDEX,
tcam_size - nroutes - nfilters - nservers);
mc5->parity_enabled = 1;
/* All the TCAM addresses we access have only the low 32 bits non 0 */
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR1, 0);
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR2, 0);
mc5_dbgi_mode_enable(mc5);
switch (mc5->part_type) {
case IDT75P52100:
err = init_idt52100(mc5);
break;
case IDT75N43102:
err = init_idt43102(mc5);
break;
default:
CH_ERR(adap, "Unsupported TCAM type %d\n", mc5->part_type);
err = -EINVAL;
break;
}
mc5_dbgi_mode_disable(mc5);
return err;
}
/*
* read_mc5_range - dump a part of the memory managed by MC5
* @mc5: the MC5 handle
* @start: the start address for the dump
* @n: number of 72-bit words to read
* @buf: result buffer
*
* Read n 72-bit words from MC5 memory from the given start location.
*/
int t3_read_mc5_range(const struct mc5 *mc5, unsigned int start,
unsigned int n, u32 *buf)
{
u32 read_cmd;
int err = 0;
struct adapter *adap = mc5->adapter;
if (mc5->part_type == IDT75P52100)
read_cmd = IDT_CMD_READ;
else if (mc5->part_type == IDT75N43102)
read_cmd = IDT4_CMD_READ;
else
return -EINVAL;
mc5_dbgi_mode_enable(mc5);
while (n--) {
t3_write_reg(adap, A_MC5_DB_DBGI_REQ_ADDR0, start++);
if (mc5_cmd_write(adap, read_cmd)) {
err = -EIO;
break;
}
dbgi_rd_rsp3(adap, buf + 2, buf + 1, buf);
buf += 3;
}
mc5_dbgi_mode_disable(mc5);
return 0;
}
#define MC5_INT_FATAL (F_PARITYERR | F_REQQPARERR | F_DISPQPARERR)
/*
* MC5 interrupt handler
*/
void t3_mc5_intr_handler(struct mc5 *mc5)
{
struct adapter *adap = mc5->adapter;
u32 cause = t3_read_reg(adap, A_MC5_DB_INT_CAUSE);
if ((cause & F_PARITYERR) && mc5->parity_enabled) {
CH_ALERT(adap, "MC5 parity error\n");
mc5->stats.parity_err++;
}
if (cause & F_REQQPARERR) {
CH_ALERT(adap, "MC5 request queue parity error\n");
mc5->stats.reqq_parity_err++;
}
if (cause & F_DISPQPARERR) {
CH_ALERT(adap, "MC5 dispatch queue parity error\n");
mc5->stats.dispq_parity_err++;
}
if (cause & F_ACTRGNFULL)
mc5->stats.active_rgn_full++;
if (cause & F_NFASRCHFAIL)
mc5->stats.nfa_srch_err++;
if (cause & F_UNKNOWNCMD)
mc5->stats.unknown_cmd++;
if (cause & F_DELACTEMPTY)
mc5->stats.del_act_empty++;
if (cause & MC5_INT_FATAL)
t3_fatal_err(adap);
t3_write_reg(adap, A_MC5_DB_INT_CAUSE, cause);
}
void __devinit t3_mc5_prep(struct adapter *adapter, struct mc5 *mc5, int mode)
{
#define K * 1024
static unsigned int tcam_part_size[] = { /* in K 72-bit entries */
64 K, 128 K, 256 K, 32 K
};
#undef K
u32 cfg = t3_read_reg(adapter, A_MC5_DB_CONFIG);
mc5->adapter = adapter;
mc5->mode = (unsigned char)mode;
mc5->part_type = (unsigned char)G_TMTYPE(cfg);
if (cfg & F_TMTYPEHI)
mc5->part_type |= 4;
mc5->tcam_size = tcam_part_size[G_TMPARTSIZE(cfg)];
if (mode == MC5_MODE_144_BIT)
mc5->tcam_size /= 2;
}