78e92006f4
The adapter_nr module options can be used to allocate static adapter numbers on a driver level. It avoids problems with changing DVB apapter numbers after warm/cold boot or device unplugging and repluging. Each driver holds DVB_MAX_ADAPTER long array of the preferred order of adapter numbers. options dvb-usb-dib0700 adapter_nr=7,6,5,4,3,2,1,0 would result in a reversed allocation of adapter numbers. With adapter_nr=2,5 it tries first to get adapter number 2 and 5. If both are already in use it will allocate the lowest free adapter number. Signed-off-by: Janne Grunau <janne-dvb@grunau.be> Acked-by: Hermann Pitton <hermann.pitton@arcor.de> Signed-off-by: Michael Krufky <mkrufky@linuxtv.org> Signed-off-by: Mauro Carvalho Chehab <mchehab@infradead.org>
294 lines
7.6 KiB
C
294 lines
7.6 KiB
C
/* DVB USB compliant Linux driver for the
|
|
* - GENPIX 8pks/qpsk/DCII USB2.0 DVB-S module
|
|
*
|
|
* Copyright (C) 2006,2007 Alan Nisota (alannisota@gmail.com)
|
|
* Copyright (C) 2006,2007 Genpix Electronics (genpix@genpix-electronics.com)
|
|
*
|
|
* Thanks to GENPIX for the sample code used to implement this module.
|
|
*
|
|
* This module is based off the vp7045 and vp702x modules
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License as published by the Free
|
|
* Software Foundation, version 2.
|
|
*
|
|
* see Documentation/dvb/README.dvb-usb for more information
|
|
*/
|
|
#include "gp8psk.h"
|
|
|
|
/* debug */
|
|
static char bcm4500_firmware[] = "dvb-usb-gp8psk-02.fw";
|
|
int dvb_usb_gp8psk_debug;
|
|
module_param_named(debug,dvb_usb_gp8psk_debug, int, 0644);
|
|
MODULE_PARM_DESC(debug, "set debugging level (1=info,xfer=2,rc=4 (or-able))." DVB_USB_DEBUG_STATUS);
|
|
|
|
DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
|
|
|
|
int gp8psk_usb_in_op(struct dvb_usb_device *d, u8 req, u16 value, u16 index, u8 *b, int blen)
|
|
{
|
|
int ret = 0,try = 0;
|
|
|
|
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
|
|
return ret;
|
|
|
|
while (ret >= 0 && ret != blen && try < 3) {
|
|
ret = usb_control_msg(d->udev,
|
|
usb_rcvctrlpipe(d->udev,0),
|
|
req,
|
|
USB_TYPE_VENDOR | USB_DIR_IN,
|
|
value,index,b,blen,
|
|
2000);
|
|
deb_info("reading number %d (ret: %d)\n",try,ret);
|
|
try++;
|
|
}
|
|
|
|
if (ret < 0 || ret != blen) {
|
|
warn("usb in %d operation failed.", req);
|
|
ret = -EIO;
|
|
} else
|
|
ret = 0;
|
|
|
|
deb_xfer("in: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
|
|
debug_dump(b,blen,deb_xfer);
|
|
|
|
mutex_unlock(&d->usb_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
int gp8psk_usb_out_op(struct dvb_usb_device *d, u8 req, u16 value,
|
|
u16 index, u8 *b, int blen)
|
|
{
|
|
int ret;
|
|
|
|
deb_xfer("out: req. %x, val: %x, ind: %x, buffer: ",req,value,index);
|
|
debug_dump(b,blen,deb_xfer);
|
|
|
|
if ((ret = mutex_lock_interruptible(&d->usb_mutex)))
|
|
return ret;
|
|
|
|
if (usb_control_msg(d->udev,
|
|
usb_sndctrlpipe(d->udev,0),
|
|
req,
|
|
USB_TYPE_VENDOR | USB_DIR_OUT,
|
|
value,index,b,blen,
|
|
2000) != blen) {
|
|
warn("usb out operation failed.");
|
|
ret = -EIO;
|
|
} else
|
|
ret = 0;
|
|
mutex_unlock(&d->usb_mutex);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gp8psk_load_bcm4500fw(struct dvb_usb_device *d)
|
|
{
|
|
int ret;
|
|
const struct firmware *fw = NULL;
|
|
u8 *ptr, *buf;
|
|
if ((ret = request_firmware(&fw, bcm4500_firmware,
|
|
&d->udev->dev)) != 0) {
|
|
err("did not find the bcm4500 firmware file. (%s) "
|
|
"Please see linux/Documentation/dvb/ for more details on firmware-problems. (%d)",
|
|
bcm4500_firmware,ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = -EINVAL;
|
|
|
|
if (gp8psk_usb_out_op(d, LOAD_BCM4500,1,0,NULL, 0))
|
|
goto out_rel_fw;
|
|
|
|
info("downloading bcm4500 firmware from file '%s'",bcm4500_firmware);
|
|
|
|
ptr = fw->data;
|
|
buf = kmalloc(64, GFP_KERNEL | GFP_DMA);
|
|
|
|
while (ptr[0] != 0xff) {
|
|
u16 buflen = ptr[0] + 4;
|
|
if (ptr + buflen >= fw->data + fw->size) {
|
|
err("failed to load bcm4500 firmware.");
|
|
goto out_free;
|
|
}
|
|
memcpy(buf, ptr, buflen);
|
|
if (dvb_usb_generic_write(d, buf, buflen)) {
|
|
err("failed to load bcm4500 firmware.");
|
|
goto out_free;
|
|
}
|
|
ptr += buflen;
|
|
}
|
|
|
|
ret = 0;
|
|
|
|
out_free:
|
|
kfree(buf);
|
|
out_rel_fw:
|
|
release_firmware(fw);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int gp8psk_power_ctrl(struct dvb_usb_device *d, int onoff)
|
|
{
|
|
u8 status, buf;
|
|
int gp_product_id = le16_to_cpu(d->udev->descriptor.idProduct);
|
|
|
|
if (onoff) {
|
|
gp8psk_usb_in_op(d, GET_8PSK_CONFIG,0,0,&status,1);
|
|
if (! (status & bm8pskStarted)) { /* started */
|
|
if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
|
|
gp8psk_usb_out_op(d, CW3K_INIT, 1, 0, NULL, 0);
|
|
if (gp8psk_usb_in_op(d, BOOT_8PSK, 1, 0, &buf, 1))
|
|
return -EINVAL;
|
|
}
|
|
|
|
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
|
|
if (! (status & bm8pskFW_Loaded)) /* BCM4500 firmware loaded */
|
|
if(gp8psk_load_bcm4500fw(d))
|
|
return EINVAL;
|
|
|
|
if (! (status & bmIntersilOn)) /* LNB Power */
|
|
if (gp8psk_usb_in_op(d, START_INTERSIL, 1, 0,
|
|
&buf, 1))
|
|
return EINVAL;
|
|
|
|
/* Set DVB mode to 1 */
|
|
if (gp_product_id == USB_PID_GENPIX_8PSK_REV_1_WARM)
|
|
if (gp8psk_usb_out_op(d, SET_DVB_MODE, 1, 0, NULL, 0))
|
|
return EINVAL;
|
|
/* Abort possible TS (if previous tune crashed) */
|
|
if (gp8psk_usb_out_op(d, ARM_TRANSFER, 0, 0, NULL, 0))
|
|
return EINVAL;
|
|
} else {
|
|
/* Turn off LNB power */
|
|
if (gp8psk_usb_in_op(d, START_INTERSIL, 0, 0, &buf, 1))
|
|
return EINVAL;
|
|
/* Turn off 8psk power */
|
|
if (gp8psk_usb_in_op(d, BOOT_8PSK, 0, 0, &buf, 1))
|
|
return -EINVAL;
|
|
if(gp_product_id == USB_PID_GENPIX_SKYWALKER_CW3K)
|
|
gp8psk_usb_out_op(d, CW3K_INIT, 0, 0, NULL, 0);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int gp8psk_streaming_ctrl(struct dvb_usb_adapter *adap, int onoff)
|
|
{
|
|
return gp8psk_usb_out_op(adap->dev, ARM_TRANSFER, onoff, 0 , NULL, 0);
|
|
}
|
|
|
|
static int gp8psk_frontend_attach(struct dvb_usb_adapter *adap)
|
|
{
|
|
adap->fe = gp8psk_fe_attach(adap->dev);
|
|
return 0;
|
|
}
|
|
|
|
static struct dvb_usb_device_properties gp8psk_properties;
|
|
|
|
static int gp8psk_usb_probe(struct usb_interface *intf,
|
|
const struct usb_device_id *id)
|
|
{
|
|
int ret;
|
|
struct usb_device *udev = interface_to_usbdev(intf);
|
|
ret = dvb_usb_device_init(intf, &gp8psk_properties,
|
|
THIS_MODULE, NULL, adapter_nr);
|
|
if (ret == 0) {
|
|
info("found Genpix USB device pID = %x (hex)",
|
|
le16_to_cpu(udev->descriptor.idProduct));
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static struct usb_device_id gp8psk_usb_table [] = {
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_COLD) },
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_1_WARM) },
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_8PSK_REV_2) },
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_1) },
|
|
{ USB_DEVICE(USB_VID_GENPIX, USB_PID_GENPIX_SKYWALKER_CW3K) },
|
|
{ 0 },
|
|
};
|
|
MODULE_DEVICE_TABLE(usb, gp8psk_usb_table);
|
|
|
|
static struct dvb_usb_device_properties gp8psk_properties = {
|
|
.usb_ctrl = CYPRESS_FX2,
|
|
.firmware = "dvb-usb-gp8psk-01.fw",
|
|
|
|
.num_adapters = 1,
|
|
.adapter = {
|
|
{
|
|
.streaming_ctrl = gp8psk_streaming_ctrl,
|
|
.frontend_attach = gp8psk_frontend_attach,
|
|
/* parameter for the MPEG2-data transfer */
|
|
.stream = {
|
|
.type = USB_BULK,
|
|
.count = 7,
|
|
.endpoint = 0x82,
|
|
.u = {
|
|
.bulk = {
|
|
.buffersize = 8192,
|
|
}
|
|
}
|
|
},
|
|
}
|
|
},
|
|
.power_ctrl = gp8psk_power_ctrl,
|
|
|
|
.generic_bulk_ctrl_endpoint = 0x01,
|
|
|
|
.num_device_descs = 4,
|
|
.devices = {
|
|
{ .name = "Genpix 8PSK-to-USB2 Rev.1 DVB-S receiver",
|
|
.cold_ids = { &gp8psk_usb_table[0], NULL },
|
|
.warm_ids = { &gp8psk_usb_table[1], NULL },
|
|
},
|
|
{ .name = "Genpix 8PSK-to-USB2 Rev.2 DVB-S receiver",
|
|
.cold_ids = { NULL },
|
|
.warm_ids = { &gp8psk_usb_table[2], NULL },
|
|
},
|
|
{ .name = "Genpix SkyWalker-1 DVB-S receiver",
|
|
.cold_ids = { NULL },
|
|
.warm_ids = { &gp8psk_usb_table[3], NULL },
|
|
},
|
|
{ .name = "Genpix SkyWalker-CW3K DVB-S receiver",
|
|
.cold_ids = { NULL },
|
|
.warm_ids = { &gp8psk_usb_table[4], NULL },
|
|
},
|
|
{ NULL },
|
|
}
|
|
};
|
|
|
|
/* usb specific object needed to register this driver with the usb subsystem */
|
|
static struct usb_driver gp8psk_usb_driver = {
|
|
.name = "dvb_usb_gp8psk",
|
|
.probe = gp8psk_usb_probe,
|
|
.disconnect = dvb_usb_device_exit,
|
|
.id_table = gp8psk_usb_table,
|
|
};
|
|
|
|
/* module stuff */
|
|
static int __init gp8psk_usb_module_init(void)
|
|
{
|
|
int result;
|
|
if ((result = usb_register(&gp8psk_usb_driver))) {
|
|
err("usb_register failed. (%d)",result);
|
|
return result;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void __exit gp8psk_usb_module_exit(void)
|
|
{
|
|
/* deregister this driver from the USB subsystem */
|
|
usb_deregister(&gp8psk_usb_driver);
|
|
}
|
|
|
|
module_init(gp8psk_usb_module_init);
|
|
module_exit(gp8psk_usb_module_exit);
|
|
|
|
MODULE_AUTHOR("Alan Nisota <alannisota@gamil.com>");
|
|
MODULE_DESCRIPTION("Driver for Genpix 8psk-to-USB2 DVB-S");
|
|
MODULE_VERSION("1.1");
|
|
MODULE_LICENSE("GPL");
|