kernel-fxtec-pro1x/include/rdma/ib_cm.h
Sean Hefty 1d84612649 IB/cm: Include HCA ACK delay in local ACK timeout
The IB CM should include the HCA ACK delay when calculating the local
ACK timeout value to use for RC QPs.  If the HCA ACK delay is large
enough relative to the packet life time, then if it is not taken into
account, the calculated timeout value ends up being too small, which
can result in "retry exceeded" errors.

Signed-off-by: Sean Hefty <sean.hefty@intel.com>
Signed-off-by: Roland Dreier <rolandd@cisco.com>
2007-07-10 21:50:05 -07:00

588 lines
18 KiB
C

/*
* Copyright (c) 2004, 2005 Intel Corporation. All rights reserved.
* Copyright (c) 2004 Topspin Corporation. All rights reserved.
* Copyright (c) 2004 Voltaire Corporation. All rights reserved.
* Copyright (c) 2005 Sun Microsystems, Inc. All rights reserved.
*
* This software is available to you under a choice of one of two
* licenses. You may choose to be licensed under the terms of the GNU
* General Public License (GPL) Version 2, available from the file
* COPYING in the main directory of this source tree, or the
* OpenIB.org BSD license below:
*
* Redistribution and use in source and binary forms, with or
* without modification, are permitted provided that the following
* conditions are met:
*
* - Redistributions of source code must retain the above
* copyright notice, this list of conditions and the following
* disclaimer.
*
* - Redistributions in binary form must reproduce the above
* copyright notice, this list of conditions and the following
* disclaimer in the documentation and/or other materials
* provided with the distribution.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
* BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
* ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
* CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
* SOFTWARE.
*
* $Id: ib_cm.h 4311 2005-12-05 18:42:01Z sean.hefty $
*/
#if !defined(IB_CM_H)
#define IB_CM_H
#include <rdma/ib_mad.h>
#include <rdma/ib_sa.h>
enum ib_cm_state {
IB_CM_IDLE,
IB_CM_LISTEN,
IB_CM_REQ_SENT,
IB_CM_REQ_RCVD,
IB_CM_MRA_REQ_SENT,
IB_CM_MRA_REQ_RCVD,
IB_CM_REP_SENT,
IB_CM_REP_RCVD,
IB_CM_MRA_REP_SENT,
IB_CM_MRA_REP_RCVD,
IB_CM_ESTABLISHED,
IB_CM_DREQ_SENT,
IB_CM_DREQ_RCVD,
IB_CM_TIMEWAIT,
IB_CM_SIDR_REQ_SENT,
IB_CM_SIDR_REQ_RCVD
};
enum ib_cm_lap_state {
IB_CM_LAP_UNINIT,
IB_CM_LAP_IDLE,
IB_CM_LAP_SENT,
IB_CM_LAP_RCVD,
IB_CM_MRA_LAP_SENT,
IB_CM_MRA_LAP_RCVD,
};
enum ib_cm_event_type {
IB_CM_REQ_ERROR,
IB_CM_REQ_RECEIVED,
IB_CM_REP_ERROR,
IB_CM_REP_RECEIVED,
IB_CM_RTU_RECEIVED,
IB_CM_USER_ESTABLISHED,
IB_CM_DREQ_ERROR,
IB_CM_DREQ_RECEIVED,
IB_CM_DREP_RECEIVED,
IB_CM_TIMEWAIT_EXIT,
IB_CM_MRA_RECEIVED,
IB_CM_REJ_RECEIVED,
IB_CM_LAP_ERROR,
IB_CM_LAP_RECEIVED,
IB_CM_APR_RECEIVED,
IB_CM_SIDR_REQ_ERROR,
IB_CM_SIDR_REQ_RECEIVED,
IB_CM_SIDR_REP_RECEIVED
};
enum ib_cm_data_size {
IB_CM_REQ_PRIVATE_DATA_SIZE = 92,
IB_CM_MRA_PRIVATE_DATA_SIZE = 222,
IB_CM_REJ_PRIVATE_DATA_SIZE = 148,
IB_CM_REP_PRIVATE_DATA_SIZE = 196,
IB_CM_RTU_PRIVATE_DATA_SIZE = 224,
IB_CM_DREQ_PRIVATE_DATA_SIZE = 220,
IB_CM_DREP_PRIVATE_DATA_SIZE = 224,
IB_CM_REJ_ARI_LENGTH = 72,
IB_CM_LAP_PRIVATE_DATA_SIZE = 168,
IB_CM_APR_PRIVATE_DATA_SIZE = 148,
IB_CM_APR_INFO_LENGTH = 72,
IB_CM_SIDR_REQ_PRIVATE_DATA_SIZE = 216,
IB_CM_SIDR_REP_PRIVATE_DATA_SIZE = 136,
IB_CM_SIDR_REP_INFO_LENGTH = 72,
IB_CM_COMPARE_SIZE = 64
};
struct ib_cm_id;
struct ib_cm_req_event_param {
struct ib_cm_id *listen_id;
u8 port;
struct ib_sa_path_rec *primary_path;
struct ib_sa_path_rec *alternate_path;
__be64 remote_ca_guid;
u32 remote_qkey;
u32 remote_qpn;
enum ib_qp_type qp_type;
u32 starting_psn;
u8 responder_resources;
u8 initiator_depth;
unsigned int local_cm_response_timeout:5;
unsigned int flow_control:1;
unsigned int remote_cm_response_timeout:5;
unsigned int retry_count:3;
unsigned int rnr_retry_count:3;
unsigned int srq:1;
};
struct ib_cm_rep_event_param {
__be64 remote_ca_guid;
u32 remote_qkey;
u32 remote_qpn;
u32 starting_psn;
u8 responder_resources;
u8 initiator_depth;
unsigned int target_ack_delay:5;
unsigned int failover_accepted:2;
unsigned int flow_control:1;
unsigned int rnr_retry_count:3;
unsigned int srq:1;
};
enum ib_cm_rej_reason {
IB_CM_REJ_NO_QP = 1,
IB_CM_REJ_NO_EEC = 2,
IB_CM_REJ_NO_RESOURCES = 3,
IB_CM_REJ_TIMEOUT = 4,
IB_CM_REJ_UNSUPPORTED = 5,
IB_CM_REJ_INVALID_COMM_ID = 6,
IB_CM_REJ_INVALID_COMM_INSTANCE = 7,
IB_CM_REJ_INVALID_SERVICE_ID = 8,
IB_CM_REJ_INVALID_TRANSPORT_TYPE = 9,
IB_CM_REJ_STALE_CONN = 10,
IB_CM_REJ_RDC_NOT_EXIST = 11,
IB_CM_REJ_INVALID_GID = 12,
IB_CM_REJ_INVALID_LID = 13,
IB_CM_REJ_INVALID_SL = 14,
IB_CM_REJ_INVALID_TRAFFIC_CLASS = 15,
IB_CM_REJ_INVALID_HOP_LIMIT = 16,
IB_CM_REJ_INVALID_PACKET_RATE = 17,
IB_CM_REJ_INVALID_ALT_GID = 18,
IB_CM_REJ_INVALID_ALT_LID = 19,
IB_CM_REJ_INVALID_ALT_SL = 20,
IB_CM_REJ_INVALID_ALT_TRAFFIC_CLASS = 21,
IB_CM_REJ_INVALID_ALT_HOP_LIMIT = 22,
IB_CM_REJ_INVALID_ALT_PACKET_RATE = 23,
IB_CM_REJ_PORT_CM_REDIRECT = 24,
IB_CM_REJ_PORT_REDIRECT = 25,
IB_CM_REJ_INVALID_MTU = 26,
IB_CM_REJ_INSUFFICIENT_RESP_RESOURCES = 27,
IB_CM_REJ_CONSUMER_DEFINED = 28,
IB_CM_REJ_INVALID_RNR_RETRY = 29,
IB_CM_REJ_DUPLICATE_LOCAL_COMM_ID = 30,
IB_CM_REJ_INVALID_CLASS_VERSION = 31,
IB_CM_REJ_INVALID_FLOW_LABEL = 32,
IB_CM_REJ_INVALID_ALT_FLOW_LABEL = 33
};
struct ib_cm_rej_event_param {
enum ib_cm_rej_reason reason;
void *ari;
u8 ari_length;
};
struct ib_cm_mra_event_param {
u8 service_timeout;
};
struct ib_cm_lap_event_param {
struct ib_sa_path_rec *alternate_path;
};
enum ib_cm_apr_status {
IB_CM_APR_SUCCESS,
IB_CM_APR_INVALID_COMM_ID,
IB_CM_APR_UNSUPPORTED,
IB_CM_APR_REJECT,
IB_CM_APR_REDIRECT,
IB_CM_APR_IS_CURRENT,
IB_CM_APR_INVALID_QPN_EECN,
IB_CM_APR_INVALID_LID,
IB_CM_APR_INVALID_GID,
IB_CM_APR_INVALID_FLOW_LABEL,
IB_CM_APR_INVALID_TCLASS,
IB_CM_APR_INVALID_HOP_LIMIT,
IB_CM_APR_INVALID_PACKET_RATE,
IB_CM_APR_INVALID_SL
};
struct ib_cm_apr_event_param {
enum ib_cm_apr_status ap_status;
void *apr_info;
u8 info_len;
};
struct ib_cm_sidr_req_event_param {
struct ib_cm_id *listen_id;
u8 port;
u16 pkey;
};
enum ib_cm_sidr_status {
IB_SIDR_SUCCESS,
IB_SIDR_UNSUPPORTED,
IB_SIDR_REJECT,
IB_SIDR_NO_QP,
IB_SIDR_REDIRECT,
IB_SIDR_UNSUPPORTED_VERSION
};
struct ib_cm_sidr_rep_event_param {
enum ib_cm_sidr_status status;
u32 qkey;
u32 qpn;
void *info;
u8 info_len;
};
struct ib_cm_event {
enum ib_cm_event_type event;
union {
struct ib_cm_req_event_param req_rcvd;
struct ib_cm_rep_event_param rep_rcvd;
/* No data for RTU received events. */
struct ib_cm_rej_event_param rej_rcvd;
struct ib_cm_mra_event_param mra_rcvd;
struct ib_cm_lap_event_param lap_rcvd;
struct ib_cm_apr_event_param apr_rcvd;
/* No data for DREQ/DREP received events. */
struct ib_cm_sidr_req_event_param sidr_req_rcvd;
struct ib_cm_sidr_rep_event_param sidr_rep_rcvd;
enum ib_wc_status send_status;
} param;
void *private_data;
};
/**
* ib_cm_handler - User-defined callback to process communication events.
* @cm_id: Communication identifier associated with the reported event.
* @event: Information about the communication event.
*
* IB_CM_REQ_RECEIVED and IB_CM_SIDR_REQ_RECEIVED communication events
* generated as a result of listen requests result in the allocation of a
* new @cm_id. The new @cm_id is returned to the user through this callback.
* Clients are responsible for destroying the new @cm_id. For peer-to-peer
* IB_CM_REQ_RECEIVED and all other events, the returned @cm_id corresponds
* to a user's existing communication identifier.
*
* Users may not call ib_destroy_cm_id while in the context of this callback;
* however, returning a non-zero value instructs the communication manager to
* destroy the @cm_id after the callback completes.
*/
typedef int (*ib_cm_handler)(struct ib_cm_id *cm_id,
struct ib_cm_event *event);
struct ib_cm_id {
ib_cm_handler cm_handler;
void *context;
struct ib_device *device;
__be64 service_id;
__be64 service_mask;
enum ib_cm_state state; /* internal CM/debug use */
enum ib_cm_lap_state lap_state; /* internal CM/debug use */
__be32 local_id;
__be32 remote_id;
u32 remote_cm_qpn; /* 1 unless redirected */
};
/**
* ib_create_cm_id - Allocate a communication identifier.
* @device: Device associated with the cm_id. All related communication will
* be associated with the specified device.
* @cm_handler: Callback invoked to notify the user of CM events.
* @context: User specified context associated with the communication
* identifier.
*
* Communication identifiers are used to track connection states, service
* ID resolution requests, and listen requests.
*/
struct ib_cm_id *ib_create_cm_id(struct ib_device *device,
ib_cm_handler cm_handler,
void *context);
/**
* ib_destroy_cm_id - Destroy a connection identifier.
* @cm_id: Connection identifier to destroy.
*
* This call blocks until the connection identifier is destroyed.
*/
void ib_destroy_cm_id(struct ib_cm_id *cm_id);
#define IB_SERVICE_ID_AGN_MASK __constant_cpu_to_be64(0xFF00000000000000ULL)
#define IB_CM_ASSIGN_SERVICE_ID __constant_cpu_to_be64(0x0200000000000000ULL)
#define IB_CMA_SERVICE_ID __constant_cpu_to_be64(0x0000000001000000ULL)
#define IB_CMA_SERVICE_ID_MASK __constant_cpu_to_be64(0xFFFFFFFFFF000000ULL)
#define IB_SDP_SERVICE_ID __constant_cpu_to_be64(0x0000000000010000ULL)
#define IB_SDP_SERVICE_ID_MASK __constant_cpu_to_be64(0xFFFFFFFFFFFF0000ULL)
struct ib_cm_compare_data {
u8 data[IB_CM_COMPARE_SIZE];
u8 mask[IB_CM_COMPARE_SIZE];
};
/**
* ib_cm_listen - Initiates listening on the specified service ID for
* connection and service ID resolution requests.
* @cm_id: Connection identifier associated with the listen request.
* @service_id: Service identifier matched against incoming connection
* and service ID resolution requests. The service ID should be specified
* network-byte order. If set to IB_CM_ASSIGN_SERVICE_ID, the CM will
* assign a service ID to the caller.
* @service_mask: Mask applied to service ID used to listen across a
* range of service IDs. If set to 0, the service ID is matched
* exactly. This parameter is ignored if %service_id is set to
* IB_CM_ASSIGN_SERVICE_ID.
* @compare_data: This parameter is optional. It specifies data that must
* appear in the private data of a connection request for the specified
* listen request.
*/
int ib_cm_listen(struct ib_cm_id *cm_id, __be64 service_id, __be64 service_mask,
struct ib_cm_compare_data *compare_data);
struct ib_cm_req_param {
struct ib_sa_path_rec *primary_path;
struct ib_sa_path_rec *alternate_path;
__be64 service_id;
u32 qp_num;
enum ib_qp_type qp_type;
u32 starting_psn;
const void *private_data;
u8 private_data_len;
u8 peer_to_peer;
u8 responder_resources;
u8 initiator_depth;
u8 remote_cm_response_timeout;
u8 flow_control;
u8 local_cm_response_timeout;
u8 retry_count;
u8 rnr_retry_count;
u8 max_cm_retries;
u8 srq;
};
/**
* ib_send_cm_req - Sends a connection request to the remote node.
* @cm_id: Connection identifier that will be associated with the
* connection request.
* @param: Connection request information needed to establish the
* connection.
*/
int ib_send_cm_req(struct ib_cm_id *cm_id,
struct ib_cm_req_param *param);
struct ib_cm_rep_param {
u32 qp_num;
u32 starting_psn;
const void *private_data;
u8 private_data_len;
u8 responder_resources;
u8 initiator_depth;
u8 failover_accepted;
u8 flow_control;
u8 rnr_retry_count;
u8 srq;
};
/**
* ib_send_cm_rep - Sends a connection reply in response to a connection
* request.
* @cm_id: Connection identifier that will be associated with the
* connection request.
* @param: Connection reply information needed to establish the
* connection.
*/
int ib_send_cm_rep(struct ib_cm_id *cm_id,
struct ib_cm_rep_param *param);
/**
* ib_send_cm_rtu - Sends a connection ready to use message in response
* to a connection reply message.
* @cm_id: Connection identifier associated with the connection request.
* @private_data: Optional user-defined private data sent with the
* ready to use message.
* @private_data_len: Size of the private data buffer, in bytes.
*/
int ib_send_cm_rtu(struct ib_cm_id *cm_id,
const void *private_data,
u8 private_data_len);
/**
* ib_send_cm_dreq - Sends a disconnection request for an existing
* connection.
* @cm_id: Connection identifier associated with the connection being
* released.
* @private_data: Optional user-defined private data sent with the
* disconnection request message.
* @private_data_len: Size of the private data buffer, in bytes.
*/
int ib_send_cm_dreq(struct ib_cm_id *cm_id,
const void *private_data,
u8 private_data_len);
/**
* ib_send_cm_drep - Sends a disconnection reply to a disconnection request.
* @cm_id: Connection identifier associated with the connection being
* released.
* @private_data: Optional user-defined private data sent with the
* disconnection reply message.
* @private_data_len: Size of the private data buffer, in bytes.
*
* If the cm_id is in the correct state, the CM will transition the connection
* to the timewait state, even if an error occurs sending the DREP message.
*/
int ib_send_cm_drep(struct ib_cm_id *cm_id,
const void *private_data,
u8 private_data_len);
/**
* ib_cm_notify - Notifies the CM of an event reported to the consumer.
* @cm_id: Connection identifier to transition to established.
* @event: Type of event.
*
* This routine should be invoked by users to notify the CM of relevant
* communication events. Events that should be reported to the CM and
* when to report them are:
*
* IB_EVENT_COMM_EST - Used when a message is received on a connected
* QP before an RTU has been received.
* IB_EVENT_PATH_MIG - Notifies the CM that the connection has failed over
* to the alternate path.
*/
int ib_cm_notify(struct ib_cm_id *cm_id, enum ib_event_type event);
/**
* ib_send_cm_rej - Sends a connection rejection message to the
* remote node.
* @cm_id: Connection identifier associated with the connection being
* rejected.
* @reason: Reason for the connection request rejection.
* @ari: Optional additional rejection information.
* @ari_length: Size of the additional rejection information, in bytes.
* @private_data: Optional user-defined private data sent with the
* rejection message.
* @private_data_len: Size of the private data buffer, in bytes.
*/
int ib_send_cm_rej(struct ib_cm_id *cm_id,
enum ib_cm_rej_reason reason,
void *ari,
u8 ari_length,
const void *private_data,
u8 private_data_len);
/**
* ib_send_cm_mra - Sends a message receipt acknowledgement to a connection
* message.
* @cm_id: Connection identifier associated with the connection message.
* @service_timeout: The maximum time required for the sender to reply to
* to the connection message.
* @private_data: Optional user-defined private data sent with the
* message receipt acknowledgement.
* @private_data_len: Size of the private data buffer, in bytes.
*/
int ib_send_cm_mra(struct ib_cm_id *cm_id,
u8 service_timeout,
const void *private_data,
u8 private_data_len);
/**
* ib_send_cm_lap - Sends a load alternate path request.
* @cm_id: Connection identifier associated with the load alternate path
* message.
* @alternate_path: A path record that identifies the alternate path to
* load.
* @private_data: Optional user-defined private data sent with the
* load alternate path message.
* @private_data_len: Size of the private data buffer, in bytes.
*/
int ib_send_cm_lap(struct ib_cm_id *cm_id,
struct ib_sa_path_rec *alternate_path,
const void *private_data,
u8 private_data_len);
/**
* ib_cm_init_qp_attr - Initializes the QP attributes for use in transitioning
* to a specified QP state.
* @cm_id: Communication identifier associated with the QP attributes to
* initialize.
* @qp_attr: On input, specifies the desired QP state. On output, the
* mandatory and desired optional attributes will be set in order to
* modify the QP to the specified state.
* @qp_attr_mask: The QP attribute mask that may be used to transition the
* QP to the specified state.
*
* Users must set the @qp_attr->qp_state to the desired QP state. This call
* will set all required attributes for the given transition, along with
* known optional attributes. Users may override the attributes returned from
* this call before calling ib_modify_qp.
*/
int ib_cm_init_qp_attr(struct ib_cm_id *cm_id,
struct ib_qp_attr *qp_attr,
int *qp_attr_mask);
/**
* ib_send_cm_apr - Sends an alternate path response message in response to
* a load alternate path request.
* @cm_id: Connection identifier associated with the alternate path response.
* @status: Reply status sent with the alternate path response.
* @info: Optional additional information sent with the alternate path
* response.
* @info_length: Size of the additional information, in bytes.
* @private_data: Optional user-defined private data sent with the
* alternate path response message.
* @private_data_len: Size of the private data buffer, in bytes.
*/
int ib_send_cm_apr(struct ib_cm_id *cm_id,
enum ib_cm_apr_status status,
void *info,
u8 info_length,
const void *private_data,
u8 private_data_len);
struct ib_cm_sidr_req_param {
struct ib_sa_path_rec *path;
__be64 service_id;
int timeout_ms;
const void *private_data;
u8 private_data_len;
u8 max_cm_retries;
};
/**
* ib_send_cm_sidr_req - Sends a service ID resolution request to the
* remote node.
* @cm_id: Communication identifier that will be associated with the
* service ID resolution request.
* @param: Service ID resolution request information.
*/
int ib_send_cm_sidr_req(struct ib_cm_id *cm_id,
struct ib_cm_sidr_req_param *param);
struct ib_cm_sidr_rep_param {
u32 qp_num;
u32 qkey;
enum ib_cm_sidr_status status;
const void *info;
u8 info_length;
const void *private_data;
u8 private_data_len;
};
/**
* ib_send_cm_sidr_rep - Sends a service ID resolution reply to the
* remote node.
* @cm_id: Communication identifier associated with the received service ID
* resolution request.
* @param: Service ID resolution reply information.
*/
int ib_send_cm_sidr_rep(struct ib_cm_id *cm_id,
struct ib_cm_sidr_rep_param *param);
#endif /* IB_CM_H */