kernel-fxtec-pro1x/drivers/media
Paul Walmsley 2962fc0120 [media] tvp5150: COMPOSITE0 input should not force-enable TV mode
When digitizing composite video from a analog videotape source using the
TVP5150's first composite input channel, the captured stream exhibits
tearing and synchronization problems[1].

It turns out that commit c0477ad9fe caused
"TV mode" (as opposed to "VCR mode" or "auto-detect") to be forcibly
enabled for both composite inputs.  According to the chip
documentation[2], "TV mode" disables a "chrominance trap" input filter,
which appears to be necessary for high-quality video capture from an
analog videotape source.  [ Commit
c7c0b34c27 subsequently restricted the
problem to the first composite input, apparently inadvertently. ]

Since any type of composite signal source can be connected to the
TVP5150's first composite input, unconditionally forcing "TV mode" isn't
correct.  There doesn't appear to be a good way for applications to tell
the driver what is connected.  Fortunately, the TVP5150 has an operating
mode auto-detection feature, which, when enabled, should cause the TVP5150
to auto-detect whether it should use "VCR mode" or "TV mode".  Enabling
operating mode auto-detection improved video capture quality
significantly[3].

Therefore, fix this bug by using operating mode auto-detection. (Also,
while here, fix a CodingStyle issue.)

For those users who may find this patch via a mailing list archive but who
are not able to upgrade to a kernel with a fixed driver: the TVP5150's
S-Video and second composite input sources have auto-detection enabled, so
you may wish to try using those -- if available on your device -- until
this fix makes it a downstream distribution near you.

1. Pre-patch tvtime snapshot using a Pinnacle PCTV HD Pro as the
   capture device and a Sony EV-S2000 as a video source:
   http://www.booyaka.com/~paul/tvp5150/1a.png

2. Section 3.21.3, "Operation Mode Control Register", _TVP5150AM1
   Ultralow-Power NTSC/PAL/SECAM Video Decoder (Rev. D)_ [SLES209D],
   downloaded 8 October 2010, available via
   http://focus.ti.com/lit/ds/symlink/tvp5150am1.pdf

3. Post-patch tvtime snapshot (same signal chain as #1, above):
   http://www.booyaka.com/~paul/tvp5150/1b.png

Signed-off-by: Paul Walmsley <paul@booyaka.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
2010-10-21 07:54:24 -02:00
..
common [media] tda18271: allow restricting max out to 4 bytes 2010-10-21 01:17:43 -02:00
dvb [media] firedtv: support for PSK8 for S2 devices. To watch HD 2010-10-21 07:54:09 -02:00
IR [media] IR: ene_ir: few bugfixes 2010-10-21 07:54:23 -02:00
radio [media] radio-mr800: fix locking order 2010-10-21 01:18:15 -02:00
video [media] tvp5150: COMPOSITE0 input should not force-enable TV mode 2010-10-21 07:54:24 -02:00
Kconfig V4L/DVB (13612): IR: Move common IR code to drivers/media/IR 2009-12-16 00:18:42 -02:00
Makefile V4L/DVB (13612): IR: Move common IR code to drivers/media/IR 2009-12-16 00:18:42 -02:00