kernel-fxtec-pro1x/drivers/net/wireless/iwlwifi/iwl-6000.c
Wey-Yi Guy c15d20c1d1 iwlwifi: set sm_ps_mode as part of cfg parameters
Setting "Spatial multiplexing Power Save" as part of
per device configuration parameter.

Report to uCode based on priv->conf setting, so driver can
have more control of how different devices should operate
in power save mode.

Signed-off-by: Wey-Yi Guy <wey-yi.w.guy@intel.com>
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
2009-11-23 17:05:32 -05:00

462 lines
14 KiB
C

/******************************************************************************
*
* Copyright(c) 2008-2009 Intel Corporation. All rights reserved.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of version 2 of the GNU General Public License as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program; if not, write to the Free Software Foundation, Inc.,
* 51 Franklin Street, Fifth Floor, Boston, MA 02110, USA
*
* The full GNU General Public License is included in this distribution in the
* file called LICENSE.
*
* Contact Information:
* Intel Linux Wireless <ilw@linux.intel.com>
* Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*
*****************************************************************************/
#include <linux/kernel.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <linux/dma-mapping.h>
#include <linux/delay.h>
#include <linux/skbuff.h>
#include <linux/netdevice.h>
#include <linux/wireless.h>
#include <net/mac80211.h>
#include <linux/etherdevice.h>
#include <asm/unaligned.h>
#include "iwl-eeprom.h"
#include "iwl-dev.h"
#include "iwl-core.h"
#include "iwl-io.h"
#include "iwl-sta.h"
#include "iwl-helpers.h"
#include "iwl-5000-hw.h"
#include "iwl-6000-hw.h"
#include "iwl-agn-led.h"
/* Highest firmware API version supported */
#define IWL6000_UCODE_API_MAX 4
#define IWL6050_UCODE_API_MAX 4
/* Lowest firmware API version supported */
#define IWL6000_UCODE_API_MIN 4
#define IWL6050_UCODE_API_MIN 4
#define IWL6000_FW_PRE "iwlwifi-6000-"
#define _IWL6000_MODULE_FIRMWARE(api) IWL6000_FW_PRE #api ".ucode"
#define IWL6000_MODULE_FIRMWARE(api) _IWL6000_MODULE_FIRMWARE(api)
#define IWL6050_FW_PRE "iwlwifi-6050-"
#define _IWL6050_MODULE_FIRMWARE(api) IWL6050_FW_PRE #api ".ucode"
#define IWL6050_MODULE_FIRMWARE(api) _IWL6050_MODULE_FIRMWARE(api)
static void iwl6000_set_ct_threshold(struct iwl_priv *priv)
{
/* want Celsius */
priv->hw_params.ct_kill_threshold = CT_KILL_THRESHOLD;
priv->hw_params.ct_kill_exit_threshold = CT_KILL_EXIT_THRESHOLD;
}
/* NIC configuration for 6000 series */
static void iwl6000_nic_config(struct iwl_priv *priv)
{
u16 radio_cfg;
radio_cfg = iwl_eeprom_query16(priv, EEPROM_RADIO_CONFIG);
/* write radio config values to register */
if (EEPROM_RF_CFG_TYPE_MSK(radio_cfg) <= EEPROM_RF_CONFIG_TYPE_MAX)
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
EEPROM_RF_CFG_TYPE_MSK(radio_cfg) |
EEPROM_RF_CFG_STEP_MSK(radio_cfg) |
EEPROM_RF_CFG_DASH_MSK(radio_cfg));
/* set CSR_HW_CONFIG_REG for uCode use */
iwl_set_bit(priv, CSR_HW_IF_CONFIG_REG,
CSR_HW_IF_CONFIG_REG_BIT_RADIO_SI |
CSR_HW_IF_CONFIG_REG_BIT_MAC_SI);
/* no locking required for register write */
if (priv->cfg->pa_type == IWL_PA_INTERNAL) {
/* 2x2 IPA phy type */
iwl_write32(priv, CSR_GP_DRIVER_REG,
CSR_GP_DRIVER_REG_BIT_RADIO_SKU_2x2_IPA);
}
/* else do nothing, uCode configured */
}
static struct iwl_sensitivity_ranges iwl6000_sensitivity = {
.min_nrg_cck = 97,
.max_nrg_cck = 0, /* not used, set to 0 */
.auto_corr_min_ofdm = 80,
.auto_corr_min_ofdm_mrc = 128,
.auto_corr_min_ofdm_x1 = 105,
.auto_corr_min_ofdm_mrc_x1 = 192,
.auto_corr_max_ofdm = 145,
.auto_corr_max_ofdm_mrc = 232,
.auto_corr_max_ofdm_x1 = 145,
.auto_corr_max_ofdm_mrc_x1 = 232,
.auto_corr_min_cck = 125,
.auto_corr_max_cck = 175,
.auto_corr_min_cck_mrc = 160,
.auto_corr_max_cck_mrc = 310,
.nrg_th_cck = 97,
.nrg_th_ofdm = 100,
.barker_corr_th_min = 190,
.barker_corr_th_min_mrc = 390,
.nrg_th_cca = 62,
};
static int iwl6000_hw_set_hw_params(struct iwl_priv *priv)
{
if (priv->cfg->mod_params->num_of_queues >= IWL_MIN_NUM_QUEUES &&
priv->cfg->mod_params->num_of_queues <= IWL50_NUM_QUEUES)
priv->cfg->num_of_queues =
priv->cfg->mod_params->num_of_queues;
priv->hw_params.max_txq_num = priv->cfg->num_of_queues;
priv->hw_params.dma_chnl_num = FH50_TCSR_CHNL_NUM;
priv->hw_params.scd_bc_tbls_size =
priv->cfg->num_of_queues *
sizeof(struct iwl5000_scd_bc_tbl);
priv->hw_params.tfd_size = sizeof(struct iwl_tfd);
priv->hw_params.max_stations = IWL5000_STATION_COUNT;
priv->hw_params.bcast_sta_id = IWL5000_BROADCAST_ID;
priv->hw_params.max_data_size = IWL60_RTC_DATA_SIZE;
priv->hw_params.max_inst_size = IWL60_RTC_INST_SIZE;
priv->hw_params.max_bsm_size = 0;
priv->hw_params.ht40_channel = BIT(IEEE80211_BAND_2GHZ) |
BIT(IEEE80211_BAND_5GHZ);
priv->hw_params.rx_wrt_ptr_reg = FH_RSCSR_CHNL0_WPTR;
priv->hw_params.tx_chains_num = num_of_ant(priv->cfg->valid_tx_ant);
priv->hw_params.rx_chains_num = num_of_ant(priv->cfg->valid_rx_ant);
priv->hw_params.valid_tx_ant = priv->cfg->valid_tx_ant;
priv->hw_params.valid_rx_ant = priv->cfg->valid_rx_ant;
if (priv->cfg->ops->lib->temp_ops.set_ct_kill)
priv->cfg->ops->lib->temp_ops.set_ct_kill(priv);
/* Set initial sensitivity parameters */
/* Set initial calibration set */
priv->hw_params.sens = &iwl6000_sensitivity;
priv->hw_params.calib_init_cfg =
BIT(IWL_CALIB_XTAL) |
BIT(IWL_CALIB_LO) |
BIT(IWL_CALIB_TX_IQ) |
BIT(IWL_CALIB_BASE_BAND);
return 0;
}
static int iwl6000_hw_channel_switch(struct iwl_priv *priv, u16 channel)
{
struct iwl6000_channel_switch_cmd cmd;
const struct iwl_channel_info *ch_info;
struct iwl_host_cmd hcmd = {
.id = REPLY_CHANNEL_SWITCH,
.len = sizeof(cmd),
.flags = CMD_SIZE_HUGE,
.data = &cmd,
};
IWL_DEBUG_11H(priv, "channel switch from %d to %d\n",
priv->active_rxon.channel, channel);
cmd.band = priv->band == IEEE80211_BAND_2GHZ;
cmd.channel = cpu_to_le16(channel);
cmd.rxon_flags = priv->staging_rxon.flags;
cmd.rxon_filter_flags = priv->staging_rxon.filter_flags;
cmd.switch_time = cpu_to_le32(priv->ucode_beacon_time);
ch_info = iwl_get_channel_info(priv, priv->band, channel);
if (ch_info)
cmd.expect_beacon = is_channel_radar(ch_info);
else {
IWL_ERR(priv, "invalid channel switch from %u to %u\n",
priv->active_rxon.channel, channel);
return -EFAULT;
}
priv->switch_rxon.channel = cpu_to_le16(channel);
priv->switch_rxon.switch_in_progress = true;
return iwl_send_cmd_sync(priv, &hcmd);
}
static struct iwl_lib_ops iwl6000_lib = {
.set_hw_params = iwl6000_hw_set_hw_params,
.txq_update_byte_cnt_tbl = iwl5000_txq_update_byte_cnt_tbl,
.txq_inval_byte_cnt_tbl = iwl5000_txq_inval_byte_cnt_tbl,
.txq_set_sched = iwl5000_txq_set_sched,
.txq_agg_enable = iwl5000_txq_agg_enable,
.txq_agg_disable = iwl5000_txq_agg_disable,
.txq_attach_buf_to_tfd = iwl_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = iwl_hw_txq_free_tfd,
.txq_init = iwl_hw_tx_queue_init,
.rx_handler_setup = iwl5000_rx_handler_setup,
.setup_deferred_work = iwl5000_setup_deferred_work,
.is_valid_rtc_data_addr = iwl5000_hw_valid_rtc_data_addr,
.load_ucode = iwl5000_load_ucode,
.dump_nic_event_log = iwl_dump_nic_event_log,
.dump_nic_error_log = iwl_dump_nic_error_log,
.init_alive_start = iwl5000_init_alive_start,
.alive_notify = iwl5000_alive_notify,
.send_tx_power = iwl5000_send_tx_power,
.update_chain_flags = iwl_update_chain_flags,
.set_channel_switch = iwl6000_hw_channel_switch,
.apm_ops = {
.init = iwl_apm_init,
.stop = iwl_apm_stop,
.config = iwl6000_nic_config,
.set_pwr_src = iwl_set_pwr_src,
},
.eeprom_ops = {
.regulatory_bands = {
EEPROM_5000_REG_BAND_1_CHANNELS,
EEPROM_5000_REG_BAND_2_CHANNELS,
EEPROM_5000_REG_BAND_3_CHANNELS,
EEPROM_5000_REG_BAND_4_CHANNELS,
EEPROM_5000_REG_BAND_5_CHANNELS,
EEPROM_5000_REG_BAND_24_HT40_CHANNELS,
EEPROM_5000_REG_BAND_52_HT40_CHANNELS
},
.verify_signature = iwlcore_eeprom_verify_signature,
.acquire_semaphore = iwlcore_eeprom_acquire_semaphore,
.release_semaphore = iwlcore_eeprom_release_semaphore,
.calib_version = iwl5000_eeprom_calib_version,
.query_addr = iwl5000_eeprom_query_addr,
.update_enhanced_txpower = iwlcore_eeprom_enhanced_txpower,
},
.post_associate = iwl_post_associate,
.isr = iwl_isr_ict,
.config_ap = iwl_config_ap,
.temp_ops = {
.temperature = iwl5000_temperature,
.set_ct_kill = iwl6000_set_ct_threshold,
},
};
static struct iwl_ops iwl6000_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl6000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl5000_hcmd_utils,
.led = &iwlagn_led_ops,
};
static struct iwl_hcmd_utils_ops iwl6050_hcmd_utils = {
.get_hcmd_size = iwl5000_get_hcmd_size,
.build_addsta_hcmd = iwl5000_build_addsta_hcmd,
.rts_tx_cmd_flag = iwl5000_rts_tx_cmd_flag,
.calc_rssi = iwl5000_calc_rssi,
};
static struct iwl_ops iwl6050_ops = {
.ucode = &iwl5000_ucode,
.lib = &iwl6000_lib,
.hcmd = &iwl5000_hcmd,
.utils = &iwl6050_hcmd_utils,
.led = &iwlagn_led_ops,
};
/*
* "i": Internal configuration, use internal Power Amplifier
*/
struct iwl_cfg iwl6000i_2agn_cfg = {
.name = "6000 Series 2x2 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
struct iwl_cfg iwl6000i_2abg_cfg = {
.name = "6000 Series 2x2 ABG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
};
struct iwl_cfg iwl6000i_2bg_cfg = {
.name = "6000 Series 2x2 BG",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_G,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_BC,
.valid_rx_ant = ANT_BC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_INTERNAL,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
};
struct iwl_cfg iwl6050_2agn_cfg = {
.name = "6050 Series 2x2 AGN",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6050_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DYNAMIC,
};
struct iwl_cfg iwl6050_2abg_cfg = {
.name = "6050 Series 2x2 ABG",
.fw_name_pre = IWL6050_FW_PRE,
.ucode_api_max = IWL6050_UCODE_API_MAX,
.ucode_api_min = IWL6050_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G,
.ops = &iwl6050_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6050_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_AB,
.valid_rx_ant = ANT_AB,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x50,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
};
struct iwl_cfg iwl6000_3agn_cfg = {
.name = "6000 Series 3x3 AGN",
.fw_name_pre = IWL6000_FW_PRE,
.ucode_api_max = IWL6000_UCODE_API_MAX,
.ucode_api_min = IWL6000_UCODE_API_MIN,
.sku = IWL_SKU_A|IWL_SKU_G|IWL_SKU_N,
.ops = &iwl6000_ops,
.eeprom_size = OTP_LOW_IMAGE_SIZE,
.eeprom_ver = EEPROM_6000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.num_of_queues = IWL50_NUM_QUEUES,
.num_of_ampdu_queues = IWL50_NUM_AMPDU_QUEUES,
.mod_params = &iwl50_mod_params,
.valid_tx_ant = ANT_ABC,
.valid_rx_ant = ANT_ABC,
.pll_cfg_val = 0,
.set_l0s = true,
.use_bsm = false,
.pa_type = IWL_PA_SYSTEM,
.max_ll_items = OTP_MAX_LL_ITEMS_6x00,
.shadow_ram_support = true,
.ht_greenfield_support = true,
.led_compensation = 51,
.use_rts_for_ht = true, /* use rts/cts protection */
.chain_noise_num_beacons = IWL_CAL_NUM_BEACONS,
.supports_idle = true,
.adv_thermal_throttle = true,
.support_ct_kill_exit = true,
.sm_ps_mode = WLAN_HT_CAP_SM_PS_DISABLED,
};
MODULE_FIRMWARE(IWL6000_MODULE_FIRMWARE(IWL6000_UCODE_API_MAX));
MODULE_FIRMWARE(IWL6050_MODULE_FIRMWARE(IWL6050_UCODE_API_MAX));