Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/arm/mach-omap2
History
Tony Lindgren 25d6f63093 omap2: Fix GPIO numbers and smc91x for 2430sdp 
Fix GPIO numbers and smc91x for 2430sdp. The earlier code
had cut and paste errors from 3430sdp code. Also, 2430
has five GPIO banks for a total of 160 GPIO lines.

Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-08-02 14:21:39 +03:00
..
include/mach omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
board-2430sdp.c omap2: Fix GPIO numbers and smc91x for 2430sdp 2010-08-02 14:21:39 +03:00
board-3430sdp.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-3630sdp.c omap3: 3630sdp: Explicitly enable all UARTs 2010-03-15 16:34:19 -05:00
board-4430sdp.c omap4: Adding hsmmc support to board file 2010-05-20 11:21:21 -07:00
board-am3517evm.c AM3517: rename the i2c boardinfo to make it more readable 2010-05-20 11:18:29 -07:00
board-apollon.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-cm-t35.c omap3: Fix compile for board-cm-t35 2010-05-04 13:19:16 -07:00
board-devkit8000.c omap: Devkit8000: Add mux initialization 2010-05-20 10:48:57 -07:00
board-generic.c omap2/3/4: Fix omap2_map_common_io for multi-omap 2010-02-15 09:26:58 -08:00
board-h4.c omap: convert boards to use physmap-flash 2010-02-15 10:03:32 -08:00
board-igep0020.c omap3: Fix EHCI port for IGEP v2 board 2010-04-23 15:35:11 -07:00
board-ldp.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-n8x0.c omap: Fix n8x0 mmc_mmc_init compile warnings and typos 2010-04-23 15:35:11 -07:00
board-omap3beagle.c board-omap3-beagle: add DSS2 support 2010-05-18 15:06:07 +03:00
board-omap3evm.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-omap3pandora.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-omap3stalker.c omap: Stalker board: switch over to gpio_set_debounce 2010-06-09 13:53:05 +03:00
board-omap3touchbook.c arm: omap: switch over to gpio_set_debounce 2010-05-27 09:12:42 -07:00
board-overo.c omap: Overo: Add support for second ethernet port 2010-05-20 10:53:55 -07:00
board-rx51-peripherals.c Input: RX51 keymap - fix recent compile breakage 2010-07-26 08:05:31 -07:00
board-rx51-sdram.c omap3: rx51: Add SDRAM init 2009-11-22 10:24:33 -08:00
board-rx51-video.c OMAP: RX51: Add LCD Panel support 2010-05-18 15:06:02 +03:00
board-rx51.c OMAP: RX51: Add LCD Panel support 2010-05-18 15:06:02 +03:00
board-sdp-flash.c omap: board-sdp-flash.c: Fix typos in debug output 2010-04-23 15:37:24 -07:00
board-zoom-debugboard.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom-peripherals.c omap3: zoom2/3 / 3630sdp: Don't init always all uarts 2010-03-15 16:34:17 -05:00
board-zoom2.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
board-zoom3.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c OMAP2xxx clock: move the DPLL+CORE composite clock code into mach-omap2/clkt2xxx_dpllcore.c 2010-01-26 20:13:06 -07:00
clkt2xxx_osc.c OMAP2xxx clock: move osc_clk code into mach-omap2/clkt2xxx_osc.c 2010-01-28 18:13:49 -07:00
clkt2xxx_sys.c OMAP2xxx clock: move sys_clk code into mach-omap2/clkt2xxx_sys.c 2010-01-28 18:13:49 -07:00
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3xxx_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clock: Fix multi-omap boot with reset un-used clocks 2010-06-16 19:01:33 +03:00
clock2420_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock2430_data.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clockdomain.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
cm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
cm.c OMAP: CM: Move MAX_MODULE_READY_TIME to cm.h 2010-05-20 12:31:08 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
cm4xxx.c OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
cm44xx.h OMAP4: PRCM: Add offset defines for all CM registers 2010-05-20 12:31:12 -06:00
control.c OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
cpuidle34xx.c OMAP3: cpuidle: Add valid field into C-state parameter passing 2010-02-23 11:05:02 -08:00
devices.c Merge git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6 2010-05-21 14:46:51 -07:00
dpll3xxx.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap: fix a gpmc nand problem 2010-04-23 15:35:11 -07:00
gpmc-onenand.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
gpmc-smc91x.c omap: use smc91x_platdata to setup smc91x 2009-12-11 16:16:33 -08:00
gpmc.c omap2/3/4: gpmc: kill compile warning 2010-02-15 10:03:33 -08:00
hsmmc.c omap4: Adding PBIAS Configuration for MMC1 Controller 2010-05-20 11:21:22 -07:00
hsmmc.h omap_hsmmc: Allow for a shared VccQ 2010-02-15 10:03:34 -08:00
i2c.c omap: i2c: Fix muxing for command line enabled bus 2010-02-25 14:45:08 -08:00
id.c Merge branch 'for_2.6.34_b' of git://git.pwsan.com/linux-2.6 into omap-for-linus 2010-02-24 20:53:03 -08:00
io.c omap2/3: Fix DEBUG_LL for omap zoom2/3 2010-05-03 17:53:08 -07:00
iommu2.c omap iommu: add TLB preservation support 2010-05-14 10:23:31 +03:00
irq.c OMAP2/3: IRQ: ensure valid base address 2010-02-03 08:48:06 -08:00
Kconfig omap3: Add support for OMAP3Stalker boards 2010-05-20 11:21:22 -07:00
mailbox.c omap2/3/4: mailbox: remove compiler warning 2010-03-11 14:50:00 -08:00
Makefile Merge branch 'for-linus' of git://gitorious.org/linux-omap-dss2/linux 2010-05-21 15:20:57 -07:00
Makefile.boot [ARM] 3145/1: OMAP 3a/5: Add support for omap24xx 2005-11-10 14:26:51 +00:00
mcbsp.c Merge branch 'topic/asoc' into for-linus 2010-05-20 12:00:43 +02:00
mux.c include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h 2010-03-30 22:02:32 +09:00
mux.h omap3: Replace ARCH_OMAP34XX with ARCH_OMAP3 2010-02-15 09:27:02 -08:00
mux34xx.c omap3: Remove non-muxable ball entries for 3630 2010-05-04 13:19:16 -07:00
mux34xx.h omap: mux: Add 36xx CBP package support 2009-12-11 16:16:33 -08:00
omap-headsmp.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap-iommu.c omap iommu: support for OMAP4 2010-05-14 10:23:28 +03:00
omap-smp.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
omap4-common.c omap4: Move SOC specific code from board file 2010-05-20 11:17:51 -07:00
omap44xx-smc.S omap4: Fix build break when used with gcc-4.4.1 (2009-q3) 2010-04-23 15:35:11 -07:00
omap_hwmod.c OMAP: hwmod: Fix the missing braces 2010-06-23 18:15:12 -06:00
omap_hwmod_3xxx_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_2420_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_2430_data.c OMAP: hwmod: Rename hwmod name for the MPU 2010-05-20 12:31:10 -06:00
omap_hwmod_common_data.c OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
omap_hwmod_common_data.h OMAP hwmod: add hwmod class support 2010-02-24 17:45:14 -07:00
opp2xxx.h omap2/3: Multiboot compile fixes to compile in omap2 and omap3 2010-02-15 09:26:55 -08:00
opp2420_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
opp2430_data.c OMAP2xxx OPP: clean up comments in OPP data 2010-01-08 15:23:15 -07:00
pm-debug.c OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
pm.h OMAP3: PM: Add milliseconds interface to suspend wakeup timer 2010-05-12 09:39:00 -07:00
pm24xx.c OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
pm34xx.c OMAP3: PM: fix IO daisy chain enable to use PM_WKEN reg 2010-06-10 15:37:41 +03:00
powerdomain.c OMAP powerdomain, hwmod, omap_device: add some credits 2010-05-20 12:31:14 -06:00
powerdomains.h OMAP2+ powerdomains/clockdomains: prepare for multi-OMAP configs 2010-01-29 10:14:23 -07:00
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h OMAP3 PM: Defining .pwrsts_logic_ret field for core power domain structure 2010-02-24 12:05:50 -07:00
powerdomains44xx.h OMAP4 powerdomain: Support LOWPOWERSTATECHANGE for powerdomains 2010-05-20 12:31:13 -06:00
prcm-common.h OMAP4: PRCM: Remove duplicate definition of base addresses 2010-05-20 12:31:12 -06:00
prcm.c OMAP2+ PRCM: convert remaining PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3 PRCM: convert OMAP3 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:05 -06:00
prm-regbits-44xx.h OMAP4: PRCM: Define shift macros as n instead of 1 << n 2010-01-29 10:14:22 -07:00
prm.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
prm44xx.h OMAP4: PRCM: Add offset defines for all PRM registers 2010-05-20 12:31:12 -06:00
sdram-hynix-h8mbx00u0mer-0em.h omap3: zoom: Introduce zoom3 board support 2009-11-22 10:24:33 -08:00
sdram-micron-mt46h32m32lf-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h OMAP2 clock: convert clock24xx.h to clock2xxx_data.c, opp2xxx* 2009-12-11 16:16:00 -07:00
sdrc2xxx.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
serial.c omap2/3/4: serial: Remove condition for getting uart4_phys 2010-03-15 16:34:16 -05:00
sleep24xx.S omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00
sleep34xx.S OMAP3: PM: Added support for L2 aux ctrl register save and restore 2010-02-23 11:05:07 -08:00
sram34xx.S OMAP3: SDRC: Place SDRC AC timing and MR changes in CORE DVFS SRAM code behind Kconfig 2009-12-11 17:00:42 -07:00
sram242x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
sram243x.S omap: Split OMAP2_IO_ADDRESS to L3 and L4 2009-10-19 15:25:31 -07:00
timer-gp.c OMAP4: clock: Remove clock hacks from timer-gp.c 2010-02-24 17:45:17 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: fix build failure due to missing include dma-mapping.h 2010-06-09 13:53:05 +03:00
usb-musb.c usb: musb: Add extvbus in musb_board_data 2010-05-20 13:21:36 -07:00
usb-tusb6010.c omap: headers: Move remaining headers from include/mach to include/plat 2009-10-20 09:40:47 -07:00