kernel-fxtec-pro1x/drivers/usb
Frank Schaefer 25b8286805 USB-serial: pl2303: fix baud rate handling in case of unsupported values
According to the datasheets, the PL2303 supports a set of 25 baudrates.
The baudrate is set as a 4 byte value directly.

During my experiments with device 067b:2303 (PL2303X), I noticed that
 - the bridge-controller always uses 9600 baud if invalid/unsupported baud rate
   values are set
 - the baud rate value returned by usb_control_msg(..., GET_LINE_REQUEST, ...)
   does not reflect the actually used baudrate. Always the last set value is
   returned, even if it was invalid and not used by the controller.

This patch fixes the following issues with the current code:
1.) make sure that only supported baudrates are set (are there any buggy
    chip revisions out there which don't "like" other values... ?).
2.) always set the baudrate to the next nearest supported baudrate.
3.) applications can now read back the resulting baudrate properly, because
    tty_encode_baud_rate(...) is now fed with the actually used baudrate.

Signed-off-by: Frank Schaefer <schaefer.frank@gmx.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
2009-09-23 06:46:36 -07:00
..
atm firmware: atm/ueagle-atm: prepare for FIRMWARE_NAME_MAX removal 2009-06-15 21:30:24 -07:00
c67x00 usb/c67x00 endianness annotations 2008-06-04 08:06:01 -07:00
class USB: usbtmc: correct termination condition for reads. 2009-09-23 06:46:35 -07:00
core USB: increase usbdevfs max isoc buffer size 2009-09-23 06:46:33 -07:00
gadget USB: s3c2410: unregister should call unbind, not disconnect 2009-09-23 06:46:35 -07:00
host USB: ohci-ep93xx.c: remove unused variable 2009-09-23 06:46:34 -07:00
image USB: remove unneeded printks from microtek driver 2009-09-23 06:46:34 -07:00
misc USB: full autosuspend and power management support for usbsevseg 2009-09-23 06:46:28 -07:00
mon USB: usbmon: end ugly tricks with DMA peeking 2009-09-23 06:46:19 -07:00
musb USB: musb: fix put_device() call sequence 2009-09-23 06:46:33 -07:00
otg USB: otg: fix twl4030-usb build 2009-09-23 06:46:34 -07:00
serial USB-serial: pl2303: fix baud rate handling in case of unsupported values 2009-09-23 06:46:36 -07:00
storage USB: usb-storage fails to attach to Huawei Datacard cdrom device 2009-09-23 06:46:32 -07:00
wusbcore trivial: fix typos "man[ae]g?ment" -> "management" 2009-09-21 15:14:56 +02:00
Kconfig USB: at91: Add USB EHCI driver for at91sam9g45 series 2009-09-23 06:46:30 -07:00
Makefile USB: NXP ISP1362 USB host driver 2009-09-23 06:46:30 -07:00
README USB: fix directory references in usb/README 2007-11-28 13:58:34 -08:00
usb-skeleton.c USB: skeleton: Use dev_info instead of info 2009-03-24 16:20:30 -07:00

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.