kernel-fxtec-pro1x/drivers/hwmon/f75375s.c
Andrew Klossner 51b3e27001 hwmon: (f75375s) Remove unnecessary and confusing initialization
f75375_probe calls i2c_get_clientdata to initialize the data pointer,
but there isn't yet any client data to get, and the value is never
used before the variable is assigned a new value seven lines later.

The call doesn't hurt anything and wastes only a couple of cycles.
The reason to fix it is because this module serves as an example to
hackers writing new hwmon drivers, and this part of the example is
confusing.

Signed-off-by: Andrew Klossner <andrew@cesa.opbu.xerox.com>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
2009-03-12 13:36:39 +01:00

729 lines
22 KiB
C

/*
* f75375s.c - driver for the Fintek F75375/SP and F75373
* hardware monitoring features
* Copyright (C) 2006-2007 Riku Voipio <riku.voipio@movial.fi>
*
* Datasheets available at:
*
* f75375:
* http://www.fintek.com.tw/files/productfiles/2005111152950.pdf
*
* f75373:
* http://www.fintek.com.tw/files/productfiles/2005111153128.pdf
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
*/
#include <linux/module.h>
#include <linux/jiffies.h>
#include <linux/hwmon.h>
#include <linux/hwmon-sysfs.h>
#include <linux/i2c.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/f75375s.h>
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x2d, 0x2e, I2C_CLIENT_END };
/* Insmod parameters */
I2C_CLIENT_INSMOD_2(f75373, f75375);
/* Fintek F75375 registers */
#define F75375_REG_CONFIG0 0x0
#define F75375_REG_CONFIG1 0x1
#define F75375_REG_CONFIG2 0x2
#define F75375_REG_CONFIG3 0x3
#define F75375_REG_ADDR 0x4
#define F75375_REG_INTR 0x31
#define F75375_CHIP_ID 0x5A
#define F75375_REG_VERSION 0x5C
#define F75375_REG_VENDOR 0x5D
#define F75375_REG_FAN_TIMER 0x60
#define F75375_REG_VOLT(nr) (0x10 + (nr))
#define F75375_REG_VOLT_HIGH(nr) (0x20 + (nr) * 2)
#define F75375_REG_VOLT_LOW(nr) (0x21 + (nr) * 2)
#define F75375_REG_TEMP(nr) (0x14 + (nr))
#define F75375_REG_TEMP_HIGH(nr) (0x28 + (nr) * 2)
#define F75375_REG_TEMP_HYST(nr) (0x29 + (nr) * 2)
#define F75375_REG_FAN(nr) (0x16 + (nr) * 2)
#define F75375_REG_FAN_MIN(nr) (0x2C + (nr) * 2)
#define F75375_REG_FAN_FULL(nr) (0x70 + (nr) * 0x10)
#define F75375_REG_FAN_PWM_DUTY(nr) (0x76 + (nr) * 0x10)
#define F75375_REG_FAN_PWM_CLOCK(nr) (0x7D + (nr) * 0x10)
#define F75375_REG_FAN_EXP(nr) (0x74 + (nr) * 0x10)
#define F75375_REG_FAN_B_TEMP(nr, step) ((0xA0 + (nr) * 0x10) + (step))
#define F75375_REG_FAN_B_SPEED(nr, step) \
((0xA5 + (nr) * 0x10) + (step) * 2)
#define F75375_REG_PWM1_RAISE_DUTY 0x69
#define F75375_REG_PWM2_RAISE_DUTY 0x6A
#define F75375_REG_PWM1_DROP_DUTY 0x6B
#define F75375_REG_PWM2_DROP_DUTY 0x6C
#define FAN_CTRL_LINEAR(nr) (4 + nr)
#define FAN_CTRL_MODE(nr) (5 + ((nr) * 2))
/*
* Data structures and manipulation thereof
*/
struct f75375_data {
unsigned short addr;
struct device *hwmon_dev;
const char *name;
int kind;
struct mutex update_lock; /* protect register access */
char valid;
unsigned long last_updated; /* In jiffies */
unsigned long last_limits; /* In jiffies */
/* Register values */
u8 in[4];
u8 in_max[4];
u8 in_min[4];
u16 fan[2];
u16 fan_min[2];
u16 fan_full[2];
u16 fan_exp[2];
u8 fan_timer;
u8 pwm[2];
u8 pwm_mode[2];
u8 pwm_enable[2];
s8 temp[2];
s8 temp_high[2];
s8 temp_max_hyst[2];
};
static int f75375_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info);
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id);
static int f75375_remove(struct i2c_client *client);
static const struct i2c_device_id f75375_id[] = {
{ "f75373", f75373 },
{ "f75375", f75375 },
{ }
};
MODULE_DEVICE_TABLE(i2c, f75375_id);
static struct i2c_driver f75375_driver = {
.class = I2C_CLASS_HWMON,
.driver = {
.name = "f75375",
},
.probe = f75375_probe,
.remove = f75375_remove,
.id_table = f75375_id,
.detect = f75375_detect,
.address_data = &addr_data,
};
static inline int f75375_read8(struct i2c_client *client, u8 reg)
{
return i2c_smbus_read_byte_data(client, reg);
}
/* in most cases, should be called while holding update_lock */
static inline u16 f75375_read16(struct i2c_client *client, u8 reg)
{
return ((i2c_smbus_read_byte_data(client, reg) << 8)
| i2c_smbus_read_byte_data(client, reg + 1));
}
static inline void f75375_write8(struct i2c_client *client, u8 reg,
u8 value)
{
i2c_smbus_write_byte_data(client, reg, value);
}
static inline void f75375_write16(struct i2c_client *client, u8 reg,
u16 value)
{
int err = i2c_smbus_write_byte_data(client, reg, (value << 8));
if (err)
return;
i2c_smbus_write_byte_data(client, reg + 1, (value & 0xFF));
}
static struct f75375_data *f75375_update_device(struct device *dev)
{
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int nr;
mutex_lock(&data->update_lock);
/* Limit registers cache is refreshed after 60 seconds */
if (time_after(jiffies, data->last_limits + 60 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
data->temp_high[nr] =
f75375_read8(client, F75375_REG_TEMP_HIGH(nr));
data->temp_max_hyst[nr] =
f75375_read8(client, F75375_REG_TEMP_HYST(nr));
data->fan_full[nr] =
f75375_read16(client, F75375_REG_FAN_FULL(nr));
data->fan_min[nr] =
f75375_read16(client, F75375_REG_FAN_MIN(nr));
data->fan_exp[nr] =
f75375_read16(client, F75375_REG_FAN_EXP(nr));
data->pwm[nr] = f75375_read8(client,
F75375_REG_FAN_PWM_DUTY(nr));
}
for (nr = 0; nr < 4; nr++) {
data->in_max[nr] =
f75375_read8(client, F75375_REG_VOLT_HIGH(nr));
data->in_min[nr] =
f75375_read8(client, F75375_REG_VOLT_LOW(nr));
}
data->fan_timer = f75375_read8(client, F75375_REG_FAN_TIMER);
data->last_limits = jiffies;
}
/* Measurement registers cache is refreshed after 2 second */
if (time_after(jiffies, data->last_updated + 2 * HZ)
|| !data->valid) {
for (nr = 0; nr < 2; nr++) {
data->temp[nr] =
f75375_read8(client, F75375_REG_TEMP(nr));
data->fan[nr] =
f75375_read16(client, F75375_REG_FAN(nr));
}
for (nr = 0; nr < 4; nr++)
data->in[nr] =
f75375_read8(client, F75375_REG_VOLT(nr));
data->last_updated = jiffies;
data->valid = 1;
}
mutex_unlock(&data->update_lock);
return data;
}
static inline u16 rpm_from_reg(u16 reg)
{
if (reg == 0 || reg == 0xffff)
return 0;
return (1500000 / reg);
}
static inline u16 rpm_to_reg(int rpm)
{
if (rpm < 367 || rpm > 0xffff)
return 0xffff;
return (1500000 / rpm);
}
static ssize_t set_fan_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_min[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_MIN(nr), data->fan_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_fan_exp(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->fan_exp[nr] = rpm_to_reg(val);
f75375_write16(client, F75375_REG_FAN_EXP(nr), data->fan_exp[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_pwm(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
mutex_lock(&data->update_lock);
data->pwm[nr] = SENSORS_LIMIT(val, 0, 255);
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr), data->pwm[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm_enable(struct device *dev, struct device_attribute
*attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", data->pwm_enable[nr]);
}
static int set_pwm_enable_direct(struct i2c_client *client, int nr, int val)
{
struct f75375_data *data = i2c_get_clientdata(client);
u8 fanmode;
if (val < 0 || val > 4)
return -EINVAL;
fanmode = f75375_read8(client, F75375_REG_FAN_TIMER);
fanmode = ~(3 << FAN_CTRL_MODE(nr));
switch (val) {
case 0: /* Full speed */
fanmode |= (3 << FAN_CTRL_MODE(nr));
data->pwm[nr] = 255;
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
data->pwm[nr]);
break;
case 1: /* PWM */
fanmode |= (3 << FAN_CTRL_MODE(nr));
break;
case 2: /* AUTOMATIC*/
fanmode |= (2 << FAN_CTRL_MODE(nr));
break;
case 3: /* fan speed */
break;
}
f75375_write8(client, F75375_REG_FAN_TIMER, fanmode);
data->pwm_enable[nr] = val;
return 0;
}
static ssize_t set_pwm_enable(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
int err = 0;
mutex_lock(&data->update_lock);
err = set_pwm_enable_direct(client, nr, val);
mutex_unlock(&data->update_lock);
return err ? err : count;
}
static ssize_t set_pwm_mode(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
u8 conf = 0;
if (!(val == 0 || val == 1))
return -EINVAL;
mutex_lock(&data->update_lock);
conf = f75375_read8(client, F75375_REG_CONFIG1);
conf = ~(1 << FAN_CTRL_LINEAR(nr));
if (val == 0)
conf |= (1 << FAN_CTRL_LINEAR(nr)) ;
f75375_write8(client, F75375_REG_CONFIG1, conf);
data->pwm_mode[nr] = val;
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t show_pwm(struct device *dev, struct device_attribute
*attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", data->pwm[nr]);
}
static ssize_t show_pwm_mode(struct device *dev, struct device_attribute
*attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", data->pwm_mode[nr]);
}
#define VOLT_FROM_REG(val) ((val) * 8)
#define VOLT_TO_REG(val) ((val) / 8)
static ssize_t show_in(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in[nr]));
}
static ssize_t show_in_max(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_max[nr]));
}
static ssize_t show_in_min(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", VOLT_FROM_REG(data->in_min[nr]));
}
static ssize_t set_in_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_max[nr] = val;
f75375_write8(client, F75375_REG_VOLT_HIGH(nr), data->in_max[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_in_min(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtoul(buf, NULL, 10);
val = SENSORS_LIMIT(VOLT_TO_REG(val), 0, 0xff);
mutex_lock(&data->update_lock);
data->in_min[nr] = val;
f75375_write8(client, F75375_REG_VOLT_LOW(nr), data->in_min[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define TEMP_FROM_REG(val) ((val) * 1000)
#define TEMP_TO_REG(val) ((val) / 1000)
static ssize_t show_temp(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp[nr]));
}
static ssize_t show_temp_max(struct device *dev, struct device_attribute *attr,
char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_high[nr]));
}
static ssize_t show_temp_max_hyst(struct device *dev,
struct device_attribute *attr, char *buf)
{
int nr = to_sensor_dev_attr(attr)->index;
struct f75375_data *data = f75375_update_device(dev);
return sprintf(buf, "%d\n", TEMP_FROM_REG(data->temp_max_hyst[nr]));
}
static ssize_t set_temp_max(struct device *dev, struct device_attribute *attr,
const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_high[nr] = val;
f75375_write8(client, F75375_REG_TEMP_HIGH(nr), data->temp_high[nr]);
mutex_unlock(&data->update_lock);
return count;
}
static ssize_t set_temp_max_hyst(struct device *dev,
struct device_attribute *attr, const char *buf, size_t count)
{
int nr = to_sensor_dev_attr(attr)->index;
struct i2c_client *client = to_i2c_client(dev);
struct f75375_data *data = i2c_get_clientdata(client);
int val = simple_strtol(buf, NULL, 10);
val = SENSORS_LIMIT(TEMP_TO_REG(val), 0, 127);
mutex_lock(&data->update_lock);
data->temp_max_hyst[nr] = val;
f75375_write8(client, F75375_REG_TEMP_HYST(nr),
data->temp_max_hyst[nr]);
mutex_unlock(&data->update_lock);
return count;
}
#define show_fan(thing) \
static ssize_t show_##thing(struct device *dev, struct device_attribute *attr, \
char *buf)\
{\
int nr = to_sensor_dev_attr(attr)->index;\
struct f75375_data *data = f75375_update_device(dev); \
return sprintf(buf, "%d\n", rpm_from_reg(data->thing[nr])); \
}
show_fan(fan);
show_fan(fan_min);
show_fan(fan_full);
show_fan(fan_exp);
static SENSOR_DEVICE_ATTR(in0_input, S_IRUGO, show_in, NULL, 0);
static SENSOR_DEVICE_ATTR(in0_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 0);
static SENSOR_DEVICE_ATTR(in0_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 0);
static SENSOR_DEVICE_ATTR(in1_input, S_IRUGO, show_in, NULL, 1);
static SENSOR_DEVICE_ATTR(in1_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 1);
static SENSOR_DEVICE_ATTR(in1_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 1);
static SENSOR_DEVICE_ATTR(in2_input, S_IRUGO, show_in, NULL, 2);
static SENSOR_DEVICE_ATTR(in2_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 2);
static SENSOR_DEVICE_ATTR(in2_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 2);
static SENSOR_DEVICE_ATTR(in3_input, S_IRUGO, show_in, NULL, 3);
static SENSOR_DEVICE_ATTR(in3_max, S_IRUGO|S_IWUSR,
show_in_max, set_in_max, 3);
static SENSOR_DEVICE_ATTR(in3_min, S_IRUGO|S_IWUSR,
show_in_min, set_in_min, 3);
static SENSOR_DEVICE_ATTR(temp1_input, S_IRUGO, show_temp, NULL, 0);
static SENSOR_DEVICE_ATTR(temp1_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 0);
static SENSOR_DEVICE_ATTR(temp1_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 0);
static SENSOR_DEVICE_ATTR(temp2_input, S_IRUGO, show_temp, NULL, 1);
static SENSOR_DEVICE_ATTR(temp2_max_hyst, S_IRUGO|S_IWUSR,
show_temp_max_hyst, set_temp_max_hyst, 1);
static SENSOR_DEVICE_ATTR(temp2_max, S_IRUGO|S_IWUSR,
show_temp_max, set_temp_max, 1);
static SENSOR_DEVICE_ATTR(fan1_input, S_IRUGO, show_fan, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_full, S_IRUGO, show_fan_full, NULL, 0);
static SENSOR_DEVICE_ATTR(fan1_min, S_IRUGO|S_IWUSR,
show_fan_min, set_fan_min, 0);
static SENSOR_DEVICE_ATTR(fan1_exp, S_IRUGO|S_IWUSR,
show_fan_exp, set_fan_exp, 0);
static SENSOR_DEVICE_ATTR(fan2_input, S_IRUGO, show_fan, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_full, S_IRUGO, show_fan_full, NULL, 1);
static SENSOR_DEVICE_ATTR(fan2_min, S_IRUGO|S_IWUSR,
show_fan_min, set_fan_min, 1);
static SENSOR_DEVICE_ATTR(fan2_exp, S_IRUGO|S_IWUSR,
show_fan_exp, set_fan_exp, 1);
static SENSOR_DEVICE_ATTR(pwm1, S_IRUGO|S_IWUSR,
show_pwm, set_pwm, 0);
static SENSOR_DEVICE_ATTR(pwm1_enable, S_IRUGO|S_IWUSR,
show_pwm_enable, set_pwm_enable, 0);
static SENSOR_DEVICE_ATTR(pwm1_mode, S_IRUGO,
show_pwm_mode, set_pwm_mode, 0);
static SENSOR_DEVICE_ATTR(pwm2, S_IRUGO | S_IWUSR,
show_pwm, set_pwm, 1);
static SENSOR_DEVICE_ATTR(pwm2_enable, S_IRUGO|S_IWUSR,
show_pwm_enable, set_pwm_enable, 1);
static SENSOR_DEVICE_ATTR(pwm2_mode, S_IRUGO,
show_pwm_mode, set_pwm_mode, 1);
static struct attribute *f75375_attributes[] = {
&sensor_dev_attr_temp1_input.dev_attr.attr,
&sensor_dev_attr_temp1_max.dev_attr.attr,
&sensor_dev_attr_temp1_max_hyst.dev_attr.attr,
&sensor_dev_attr_temp2_input.dev_attr.attr,
&sensor_dev_attr_temp2_max.dev_attr.attr,
&sensor_dev_attr_temp2_max_hyst.dev_attr.attr,
&sensor_dev_attr_fan1_input.dev_attr.attr,
&sensor_dev_attr_fan1_full.dev_attr.attr,
&sensor_dev_attr_fan1_min.dev_attr.attr,
&sensor_dev_attr_fan1_exp.dev_attr.attr,
&sensor_dev_attr_fan2_input.dev_attr.attr,
&sensor_dev_attr_fan2_full.dev_attr.attr,
&sensor_dev_attr_fan2_min.dev_attr.attr,
&sensor_dev_attr_fan2_exp.dev_attr.attr,
&sensor_dev_attr_pwm1.dev_attr.attr,
&sensor_dev_attr_pwm1_enable.dev_attr.attr,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
&sensor_dev_attr_pwm2.dev_attr.attr,
&sensor_dev_attr_pwm2_enable.dev_attr.attr,
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
&sensor_dev_attr_in0_input.dev_attr.attr,
&sensor_dev_attr_in0_max.dev_attr.attr,
&sensor_dev_attr_in0_min.dev_attr.attr,
&sensor_dev_attr_in1_input.dev_attr.attr,
&sensor_dev_attr_in1_max.dev_attr.attr,
&sensor_dev_attr_in1_min.dev_attr.attr,
&sensor_dev_attr_in2_input.dev_attr.attr,
&sensor_dev_attr_in2_max.dev_attr.attr,
&sensor_dev_attr_in2_min.dev_attr.attr,
&sensor_dev_attr_in3_input.dev_attr.attr,
&sensor_dev_attr_in3_max.dev_attr.attr,
&sensor_dev_attr_in3_min.dev_attr.attr,
NULL
};
static const struct attribute_group f75375_group = {
.attrs = f75375_attributes,
};
static void f75375_init(struct i2c_client *client, struct f75375_data *data,
struct f75375s_platform_data *f75375s_pdata)
{
int nr;
set_pwm_enable_direct(client, 0, f75375s_pdata->pwm_enable[0]);
set_pwm_enable_direct(client, 1, f75375s_pdata->pwm_enable[1]);
for (nr = 0; nr < 2; nr++) {
data->pwm[nr] = SENSORS_LIMIT(f75375s_pdata->pwm[nr], 0, 255);
f75375_write8(client, F75375_REG_FAN_PWM_DUTY(nr),
data->pwm[nr]);
}
}
static int f75375_probe(struct i2c_client *client,
const struct i2c_device_id *id)
{
struct f75375_data *data;
struct f75375s_platform_data *f75375s_pdata = client->dev.platform_data;
int err;
if (!i2c_check_functionality(client->adapter,
I2C_FUNC_SMBUS_BYTE_DATA))
return -EIO;
if (!(data = kzalloc(sizeof(struct f75375_data), GFP_KERNEL)))
return -ENOMEM;
i2c_set_clientdata(client, data);
mutex_init(&data->update_lock);
data->kind = id->driver_data;
if ((err = sysfs_create_group(&client->dev.kobj, &f75375_group)))
goto exit_free;
if (data->kind == f75375) {
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm1_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
if (err)
goto exit_remove;
err = sysfs_chmod_file(&client->dev.kobj,
&sensor_dev_attr_pwm2_mode.dev_attr.attr,
S_IRUGO | S_IWUSR);
if (err)
goto exit_remove;
}
data->hwmon_dev = hwmon_device_register(&client->dev);
if (IS_ERR(data->hwmon_dev)) {
err = PTR_ERR(data->hwmon_dev);
goto exit_remove;
}
if (f75375s_pdata != NULL)
f75375_init(client, data, f75375s_pdata);
return 0;
exit_remove:
sysfs_remove_group(&client->dev.kobj, &f75375_group);
exit_free:
kfree(data);
i2c_set_clientdata(client, NULL);
return err;
}
static int f75375_remove(struct i2c_client *client)
{
struct f75375_data *data = i2c_get_clientdata(client);
hwmon_device_unregister(data->hwmon_dev);
sysfs_remove_group(&client->dev.kobj, &f75375_group);
kfree(data);
i2c_set_clientdata(client, NULL);
return 0;
}
/* Return 0 if detection is successful, -ENODEV otherwise */
static int f75375_detect(struct i2c_client *client, int kind,
struct i2c_board_info *info)
{
struct i2c_adapter *adapter = client->adapter;
u8 version = 0;
const char *name = "";
if (kind < 0) {
u16 vendid = f75375_read16(client, F75375_REG_VENDOR);
u16 chipid = f75375_read16(client, F75375_CHIP_ID);
version = f75375_read8(client, F75375_REG_VERSION);
if (chipid == 0x0306 && vendid == 0x1934) {
kind = f75375;
} else if (chipid == 0x0204 && vendid == 0x1934) {
kind = f75373;
} else {
dev_err(&adapter->dev,
"failed,%02X,%02X,%02X\n",
chipid, version, vendid);
return -ENODEV;
}
}
if (kind == f75375) {
name = "f75375";
} else if (kind == f75373) {
name = "f75373";
}
dev_info(&adapter->dev, "found %s version: %02X\n", name, version);
strlcpy(info->type, name, I2C_NAME_SIZE);
return 0;
}
static int __init sensors_f75375_init(void)
{
return i2c_add_driver(&f75375_driver);
}
static void __exit sensors_f75375_exit(void)
{
i2c_del_driver(&f75375_driver);
}
MODULE_AUTHOR("Riku Voipio <riku.voipio@movial.fi>");
MODULE_LICENSE("GPL");
MODULE_DESCRIPTION("F75373/F75375 hardware monitoring driver");
module_init(sensors_f75375_init);
module_exit(sensors_f75375_exit);