Techwizz/kernel-fxtec-pro1x
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
kernel-fxtec-pro1x/arch/powerpc/platforms/cell/spider-pic.c
David Howells 7d12e780e0 IRQ: Maintain regs pointer globally rather than passing to IRQ handlers 
Maintain a per-CPU global "struct pt_regs *" variable which can be used instead
of passing regs around manually through all ~1800 interrupt handlers in the
Linux kernel.

The regs pointer is used in few places, but it potentially costs both stack
space and code to pass it around.  On the FRV arch, removing the regs parameter
from all the genirq function results in a 20% speed up of the IRQ exit path
(ie: from leaving timer_interrupt() to leaving do_IRQ()).

Where appropriate, an arch may override the generic storage facility and do
something different with the variable.  On FRV, for instance, the address is
maintained in GR28 at all times inside the kernel as part of general exception
handling.

Having looked over the code, it appears that the parameter may be handed down
through up to twenty or so layers of functions.  Consider a USB character
device attached to a USB hub, attached to a USB controller that posts its
interrupts through a cascaded auxiliary interrupt controller.  A character
device driver may want to pass regs to the sysrq handler through the input
layer which adds another few layers of parameter passing.

I've build this code with allyesconfig for x86_64 and i386.  I've runtested the
main part of the code on FRV and i386, though I can't test most of the drivers.
I've also done partial conversion for powerpc and MIPS - these at least compile
with minimal configurations.

This will affect all archs.  Mostly the changes should be relatively easy.
Take do_IRQ(), store the regs pointer at the beginning, saving the old one:

	struct pt_regs *old_regs = set_irq_regs(regs);

And put the old one back at the end:

	set_irq_regs(old_regs);

Don't pass regs through to generic_handle_irq() or __do_IRQ().

In timer_interrupt(), this sort of change will be necessary:

	-	update_process_times(user_mode(regs));
	-	profile_tick(CPU_PROFILING, regs);
	+	update_process_times(user_mode(get_irq_regs()));
	+	profile_tick(CPU_PROFILING);

I'd like to move update_process_times()'s use of get_irq_regs() into itself,
except that i386, alone of the archs, uses something other than user_mode().

Some notes on the interrupt handling in the drivers:

 (*) input_dev() is now gone entirely.  The regs pointer is no longer stored in
     the input_dev struct.

 (*) finish_unlinks() in drivers/usb/host/ohci-q.c needs checking.  It does
     something different depending on whether it's been supplied with a regs
     pointer or not.

 (*) Various IRQ handler function pointers have been moved to type
     irq_handler_t.

Signed-Off-By: David Howells <dhowells@redhat.com>
(cherry picked from 1b16e7ac850969f38b375e511e3fa2f474a33867 commit)
2006-10-05 15:10:12 +01:00

375 lines
11 KiB
C
Raw Blame History

/*
* External Interrupt Controller on Spider South Bridge
*
* (C) Copyright IBM Deutschland Entwicklung GmbH 2005
*
* Author: Arnd Bergmann <arndb@de.ibm.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/ioport.h>
#include <asm/pgtable.h>
#include <asm/prom.h>
#include <asm/io.h>
#include "interrupt.h"
/* register layout taken from Spider spec, table 7.4-4 */
enum {
TIR_DEN = 0x004, /* Detection Enable Register */
TIR_MSK = 0x084, /* Mask Level Register */
TIR_EDC = 0x0c0, /* Edge Detection Clear Register */
TIR_PNDA = 0x100, /* Pending Register A */
TIR_PNDB = 0x104, /* Pending Register B */
TIR_CS = 0x144, /* Current Status Register */
TIR_LCSA = 0x150, /* Level Current Status Register A */
TIR_LCSB = 0x154, /* Level Current Status Register B */
TIR_LCSC = 0x158, /* Level Current Status Register C */
TIR_LCSD = 0x15c, /* Level Current Status Register D */
TIR_CFGA = 0x200, /* Setting Register A0 */
TIR_CFGB = 0x204, /* Setting Register B0 */
/* 0x208 ... 0x3ff Setting Register An/Bn */
TIR_PPNDA = 0x400, /* Packet Pending Register A */
TIR_PPNDB = 0x404, /* Packet Pending Register B */
TIR_PIERA = 0x408, /* Packet Output Error Register A */
TIR_PIERB = 0x40c, /* Packet Output Error Register B */
TIR_PIEN = 0x444, /* Packet Output Enable Register */
TIR_PIPND = 0x454, /* Packet Output Pending Register */
TIRDID = 0x484, /* Spider Device ID Register */
REISTIM = 0x500, /* Reissue Command Timeout Time Setting */
REISTIMEN = 0x504, /* Reissue Command Timeout Setting */
REISWAITEN = 0x508, /* Reissue Wait Control*/
};
#define SPIDER_CHIP_COUNT 4
#define SPIDER_SRC_COUNT 64
#define SPIDER_IRQ_INVALID 63
struct spider_pic {
struct irq_host *host;
struct device_node *of_node;
void __iomem *regs;
unsigned int node_id;
};
static struct spider_pic spider_pics[SPIDER_CHIP_COUNT];
static struct spider_pic *spider_virq_to_pic(unsigned int virq)
{
return irq_map[virq].host->host_data;
}
static void __iomem *spider_get_irq_config(struct spider_pic *pic,
unsigned int src)
{
return pic->regs + TIR_CFGA + 8 * src;
}
static void spider_unmask_irq(unsigned int virq)
{
struct spider_pic *pic = spider_virq_to_pic(virq);
void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
out_be32(cfg, in_be32(cfg) | 0x30000000u);
}
static void spider_mask_irq(unsigned int virq)
{
struct spider_pic *pic = spider_virq_to_pic(virq);
void __iomem *cfg = spider_get_irq_config(pic, irq_map[virq].hwirq);
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
static void spider_ack_irq(unsigned int virq)
{
struct spider_pic *pic = spider_virq_to_pic(virq);
unsigned int src = irq_map[virq].hwirq;
/* Reset edge detection logic if necessary
*/
if (get_irq_desc(virq)->status & IRQ_LEVEL)
return;
/* Only interrupts 47 to 50 can be set to edge */
if (src < 47 || src > 50)
return;
/* Perform the clear of the edge logic */
out_be32(pic->regs + TIR_EDC, 0x100 | (src & 0xf));
}
static int spider_set_irq_type(unsigned int virq, unsigned int type)
{
unsigned int sense = type & IRQ_TYPE_SENSE_MASK;
struct spider_pic *pic = spider_virq_to_pic(virq);
unsigned int hw = irq_map[virq].hwirq;
void __iomem *cfg = spider_get_irq_config(pic, hw);
struct irq_desc *desc = get_irq_desc(virq);
u32 old_mask;
u32 ic;
/* Note that only level high is supported for most interrupts */
if (sense != IRQ_TYPE_NONE && sense != IRQ_TYPE_LEVEL_HIGH &&
(hw < 47 || hw > 50))
return -EINVAL;
/* Decode sense type */
switch(sense) {
case IRQ_TYPE_EDGE_RISING:
ic = 0x3;
break;
case IRQ_TYPE_EDGE_FALLING:
ic = 0x2;
break;
case IRQ_TYPE_LEVEL_LOW:
ic = 0x0;
break;
case IRQ_TYPE_LEVEL_HIGH:
case IRQ_TYPE_NONE:
ic = 0x1;
break;
default:
return -EINVAL;
}
/* Update irq_desc */
desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
desc->status |= type & IRQ_TYPE_SENSE_MASK;
if (type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
desc->status |= IRQ_LEVEL;
/* Configure the source. One gross hack that was there before and
* that I've kept around is the priority to the BE which I set to
* be the same as the interrupt source number. I don't know wether
* that's supposed to make any kind of sense however, we'll have to
* decide that, but for now, I'm not changing the behaviour.
*/
old_mask = in_be32(cfg) & 0x30000000u;
out_be32(cfg, old_mask | (ic << 24) | (0x7 << 16) |
(pic->node_id << 4) | 0xe);
out_be32(cfg + 4, (0x2 << 16) | (hw & 0xff));
return 0;
}
static struct irq_chip spider_pic = {
.typename = " SPIDER ",
.unmask = spider_unmask_irq,
.mask = spider_mask_irq,
.ack = spider_ack_irq,
.set_type = spider_set_irq_type,
};
static int spider_host_match(struct irq_host *h, struct device_node *node)
{
struct spider_pic *pic = h->host_data;
return node == pic->of_node;
}
static int spider_host_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t hw)
{
set_irq_chip_and_handler(virq, &spider_pic, handle_level_irq);
/* Set default irq type */
set_irq_type(virq, IRQ_TYPE_NONE);
return 0;
}
static int spider_host_xlate(struct irq_host *h, struct device_node *ct,
u32 *intspec, unsigned int intsize,
irq_hw_number_t *out_hwirq, unsigned int *out_flags)
{
/* Spider interrupts have 2 cells, first is the interrupt source,
* second, well, I don't know for sure yet ... We mask the top bits
* because old device-trees encode a node number in there
*/
*out_hwirq = intspec[0] & 0x3f;
*out_flags = IRQ_TYPE_LEVEL_HIGH;
return 0;
}
static struct irq_host_ops spider_host_ops = {
.match = spider_host_match,
.map = spider_host_map,
.xlate = spider_host_xlate,
};
static void spider_irq_cascade(unsigned int irq, struct irq_desc *desc)
{
struct spider_pic *pic = desc->handler_data;
unsigned int cs, virq;
cs = in_be32(pic->regs + TIR_CS) >> 24;
if (cs == SPIDER_IRQ_INVALID)
virq = NO_IRQ;
else
virq = irq_linear_revmap(pic->host, cs);
if (virq != NO_IRQ)
generic_handle_irq(virq);
desc->chip->eoi(irq);
}
/* For hooking up the cascace we have a problem. Our device-tree is
* crap and we don't know on which BE iic interrupt we are hooked on at
* least not the "standard" way. We can reconstitute it based on two
* informations though: which BE node we are connected to and wether
* we are connected to IOIF0 or IOIF1. Right now, we really only care
* about the IBM cell blade and we know that its firmware gives us an
* interrupt-map property which is pretty strange.
*/
static unsigned int __init spider_find_cascade_and_node(struct spider_pic *pic)
{
unsigned int virq;
const u32 *imap, *tmp;
int imaplen, intsize, unit;
struct device_node *iic;
/* First, we check wether we have a real "interrupts" in the device
* tree in case the device-tree is ever fixed
*/
struct of_irq oirq;
if (of_irq_map_one(pic->of_node, 0, &oirq) == 0) {
virq = irq_create_of_mapping(oirq.controller, oirq.specifier,
oirq.size);
return virq;
}
/* Now do the horrible hacks */
tmp = get_property(pic->of_node, "#interrupt-cells", NULL);
if (tmp == NULL)
return NO_IRQ;
intsize = *tmp;
imap = get_property(pic->of_node, "interrupt-map", &imaplen);
if (imap == NULL || imaplen < (intsize + 1))
return NO_IRQ;
iic = of_find_node_by_phandle(imap[intsize]);
if (iic == NULL)
return NO_IRQ;
imap += intsize + 1;
tmp = get_property(iic, "#interrupt-cells", NULL);
if (tmp == NULL)
return NO_IRQ;
intsize = *tmp;
/* Assume unit is last entry of interrupt specifier */
unit = imap[intsize - 1];
/* Ok, we have a unit, now let's try to get the node */
tmp = get_property(iic, "ibm,interrupt-server-ranges", NULL);
if (tmp == NULL) {
of_node_put(iic);
return NO_IRQ;
}
/* ugly as hell but works for now */
pic->node_id = (*tmp) >> 1;
of_node_put(iic);
/* Ok, now let's get cracking. You may ask me why I just didn't match
* the iic host from the iic OF node, but that way I'm still compatible
* with really really old old firmwares for which we don't have a node
*/
/* Manufacture an IIC interrupt number of class 2 */
virq = irq_create_mapping(NULL,
(pic->node_id << IIC_IRQ_NODE_SHIFT) |
(2 << IIC_IRQ_CLASS_SHIFT) |
unit);
if (virq == NO_IRQ)
printk(KERN_ERR "spider_pic: failed to map cascade !");
return virq;
}
static void __init spider_init_one(struct device_node *of_node, int chip,
unsigned long addr)
{
struct spider_pic *pic = &spider_pics[chip];
int i, virq;
/* Map registers */
pic->regs = ioremap(addr, 0x1000);
if (pic->regs == NULL)
panic("spider_pic: can't map registers !");
/* Allocate a host */
pic->host = irq_alloc_host(IRQ_HOST_MAP_LINEAR, SPIDER_SRC_COUNT,
&spider_host_ops, SPIDER_IRQ_INVALID);
if (pic->host == NULL)
panic("spider_pic: can't allocate irq host !");
pic->host->host_data = pic;
/* Fill out other bits */
pic->of_node = of_node_get(of_node);
/* Go through all sources and disable them */
for (i = 0; i < SPIDER_SRC_COUNT; i++) {
void __iomem *cfg = pic->regs + TIR_CFGA + 8 * i;
out_be32(cfg, in_be32(cfg) & ~0x30000000u);
}
/* do not mask any interrupts because of level */
out_be32(pic->regs + TIR_MSK, 0x0);
/* enable interrupt packets to be output */
out_be32(pic->regs + TIR_PIEN, in_be32(pic->regs + TIR_PIEN) | 0x1);
/* Hook up the cascade interrupt to the iic and nodeid */
virq = spider_find_cascade_and_node(pic);
if (virq == NO_IRQ)
return;
set_irq_data(virq, pic);
set_irq_chained_handler(virq, spider_irq_cascade);
printk(KERN_INFO "spider_pic: node %d, addr: 0x%lx %s\n",
pic->node_id, addr, of_node->full_name);
/* Enable the interrupt detection enable bit. Do this last! */
out_be32(pic->regs + TIR_DEN, in_be32(pic->regs + TIR_DEN) | 0x1);
}
void __init spider_init_IRQ(void)
{
struct resource r;
struct device_node *dn;
int chip = 0;
/* XXX node numbers are totally bogus. We _hope_ we get the device
* nodes in the right order here but that's definitely not guaranteed,
* we need to get the node from the device tree instead.
* There is currently no proper property for it (but our whole
* device-tree is bogus anyway) so all we can do is pray or maybe test
* the address and deduce the node-id
*/
for (dn = NULL;
(dn = of_find_node_by_name(dn, "interrupt-controller"));) {
if (device_is_compatible(dn, "CBEA,platform-spider-pic")) {
if (of_address_to_resource(dn, 0, &r)) {
printk(KERN_WARNING "spider-pic: Failed\n");
continue;
}
} else if (device_is_compatible(dn, "sti,platform-spider-pic")
&& (chip < 2)) {
static long hard_coded_pics[] =
{ 0x24000008000ul, 0x34000008000ul};
r.start = hard_coded_pics[chip];
} else
continue;
spider_init_one(dn, chip++, r.start);
}
}
Reference in a new issue View git blame Copy permalink