61e115a56d
SSB is an SoC bus used in a number of embedded devices. The most well-known of these devices is probably the Linksys WRT54G, but there are others as well. The bus is also used internally on the BCM43xx and BCM44xx devices from Broadcom. This patch also includes support for SSB ID tables in modules, so that SSB drivers can be loaded automatically. Signed-off-by: Michael Buesch <mb@bu3sch.de> Signed-off-by: John W. Linville <linville@tuxdriver.com> Signed-off-by: David S. Miller <davem@davemloft.net>
204 lines
6.9 KiB
C
204 lines
6.9 KiB
C
/*
|
|
* Hardware-specific External Interface I/O core definitions
|
|
* for the BCM47xx family of SiliconBackplane-based chips.
|
|
*
|
|
* The External Interface core supports a total of three external chip selects
|
|
* supporting external interfaces. One of the external chip selects is
|
|
* used for Flash, one is used for PCMCIA, and the other may be
|
|
* programmed to support either a synchronous interface or an
|
|
* asynchronous interface. The asynchronous interface can be used to
|
|
* support external devices such as UARTs and the BCM2019 Bluetooth
|
|
* baseband processor.
|
|
* The external interface core also contains 2 on-chip 16550 UARTs, clock
|
|
* frequency control, a watchdog interrupt timer, and a GPIO interface.
|
|
*
|
|
* Copyright 2005, Broadcom Corporation
|
|
* Copyright 2006, Michael Buesch
|
|
*
|
|
* Licensed under the GPL version 2. See COPYING for details.
|
|
*/
|
|
#ifndef LINUX_SSB_EXTIFCORE_H_
|
|
#define LINUX_SSB_EXTIFCORE_H_
|
|
|
|
/* external interface address space */
|
|
#define SSB_EXTIF_PCMCIA_MEMBASE(x) (x)
|
|
#define SSB_EXTIF_PCMCIA_IOBASE(x) ((x) + 0x100000)
|
|
#define SSB_EXTIF_PCMCIA_CFGBASE(x) ((x) + 0x200000)
|
|
#define SSB_EXTIF_CFGIF_BASE(x) ((x) + 0x800000)
|
|
#define SSB_EXTIF_FLASH_BASE(x) ((x) + 0xc00000)
|
|
|
|
#define SSB_EXTIF_NR_GPIOOUT 5
|
|
/* GPIO NOTE:
|
|
* The multiple instances of output and output enable registers
|
|
* are present to allow driver software for multiple cores to control
|
|
* gpio outputs without needing to share a single register pair.
|
|
* Use the following helper macro to get a register offset value.
|
|
*/
|
|
#define SSB_EXTIF_GPIO_OUT(index) ({ \
|
|
BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
|
|
SSB_EXTIF_GPIO_OUT_BASE + ((index) * 8); \
|
|
})
|
|
#define SSB_EXTIF_GPIO_OUTEN(index) ({ \
|
|
BUILD_BUG_ON(index >= SSB_EXTIF_NR_GPIOOUT); \
|
|
SSB_EXTIF_GPIO_OUTEN_BASE + ((index) * 8); \
|
|
})
|
|
|
|
/** EXTIF core registers **/
|
|
|
|
#define SSB_EXTIF_CTL 0x0000
|
|
#define SSB_EXTIF_CTL_UARTEN (1 << 0) /* UART enable */
|
|
#define SSB_EXTIF_EXTSTAT 0x0004
|
|
#define SSB_EXTIF_EXTSTAT_EMODE (1 << 0) /* Endian mode (ro) */
|
|
#define SSB_EXTIF_EXTSTAT_EIRQPIN (1 << 1) /* External interrupt pin (ro) */
|
|
#define SSB_EXTIF_EXTSTAT_GPIOIRQPIN (1 << 2) /* GPIO interrupt pin (ro) */
|
|
#define SSB_EXTIF_PCMCIA_CFG 0x0010
|
|
#define SSB_EXTIF_PCMCIA_MEMWAIT 0x0014
|
|
#define SSB_EXTIF_PCMCIA_ATTRWAIT 0x0018
|
|
#define SSB_EXTIF_PCMCIA_IOWAIT 0x001C
|
|
#define SSB_EXTIF_PROG_CFG 0x0020
|
|
#define SSB_EXTIF_PROG_WAITCNT 0x0024
|
|
#define SSB_EXTIF_FLASH_CFG 0x0028
|
|
#define SSB_EXTIF_FLASH_WAITCNT 0x002C
|
|
#define SSB_EXTIF_WATCHDOG 0x0040
|
|
#define SSB_EXTIF_CLOCK_N 0x0044
|
|
#define SSB_EXTIF_CLOCK_SB 0x0048
|
|
#define SSB_EXTIF_CLOCK_PCI 0x004C
|
|
#define SSB_EXTIF_CLOCK_MII 0x0050
|
|
#define SSB_EXTIF_GPIO_IN 0x0060
|
|
#define SSB_EXTIF_GPIO_OUT_BASE 0x0064
|
|
#define SSB_EXTIF_GPIO_OUTEN_BASE 0x0068
|
|
#define SSB_EXTIF_EJTAG_OUTEN 0x0090
|
|
#define SSB_EXTIF_GPIO_INTPOL 0x0094
|
|
#define SSB_EXTIF_GPIO_INTMASK 0x0098
|
|
#define SSB_EXTIF_UART_DATA 0x0300
|
|
#define SSB_EXTIF_UART_TIMER 0x0310
|
|
#define SSB_EXTIF_UART_FCR 0x0320
|
|
#define SSB_EXTIF_UART_LCR 0x0330
|
|
#define SSB_EXTIF_UART_MCR 0x0340
|
|
#define SSB_EXTIF_UART_LSR 0x0350
|
|
#define SSB_EXTIF_UART_MSR 0x0360
|
|
#define SSB_EXTIF_UART_SCRATCH 0x0370
|
|
|
|
|
|
|
|
|
|
/* pcmcia/prog/flash_config */
|
|
#define SSB_EXTCFG_EN (1 << 0) /* enable */
|
|
#define SSB_EXTCFG_MODE 0xE /* mode */
|
|
#define SSB_EXTCFG_MODE_SHIFT 1
|
|
#define SSB_EXTCFG_MODE_FLASH 0x0 /* flash/asynchronous mode */
|
|
#define SSB_EXTCFG_MODE_SYNC 0x2 /* synchronous mode */
|
|
#define SSB_EXTCFG_MODE_PCMCIA 0x4 /* pcmcia mode */
|
|
#define SSB_EXTCFG_DS16 (1 << 4) /* destsize: 0=8bit, 1=16bit */
|
|
#define SSB_EXTCFG_BSWAP (1 << 5) /* byteswap */
|
|
#define SSB_EXTCFG_CLKDIV 0xC0 /* clock divider */
|
|
#define SSB_EXTCFG_CLKDIV_SHIFT 6
|
|
#define SSB_EXTCFG_CLKDIV_2 0x0 /* backplane/2 */
|
|
#define SSB_EXTCFG_CLKDIV_3 0x40 /* backplane/3 */
|
|
#define SSB_EXTCFG_CLKDIV_4 0x80 /* backplane/4 */
|
|
#define SSB_EXTCFG_CLKEN (1 << 8) /* clock enable */
|
|
#define SSB_EXTCFG_STROBE (1 << 9) /* size/bytestrobe (synch only) */
|
|
|
|
/* pcmcia_memwait */
|
|
#define SSB_PCMCIA_MEMW_0 0x0000003F /* waitcount0 */
|
|
#define SSB_PCMCIA_MEMW_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PCMCIA_MEMW_1_SHIFT 8
|
|
#define SSB_PCMCIA_MEMW_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PCMCIA_MEMW_2_SHIFT 16
|
|
#define SSB_PCMCIA_MEMW_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PCMCIA_MEMW_3_SHIFT 24
|
|
|
|
/* pcmcia_attrwait */
|
|
#define SSB_PCMCIA_ATTW_0 0x0000003F /* waitcount0 */
|
|
#define SSB_PCMCIA_ATTW_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PCMCIA_ATTW_1_SHIFT 8
|
|
#define SSB_PCMCIA_ATTW_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PCMCIA_ATTW_2_SHIFT 16
|
|
#define SSB_PCMCIA_ATTW_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PCMCIA_ATTW_3_SHIFT 24
|
|
|
|
/* pcmcia_iowait */
|
|
#define SSB_PCMCIA_IOW_0 0x0000003F /* waitcount0 */
|
|
#define SSB_PCMCIA_IOW_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PCMCIA_IOW_1_SHIFT 8
|
|
#define SSB_PCMCIA_IOW_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PCMCIA_IOW_2_SHIFT 16
|
|
#define SSB_PCMCIA_IOW_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PCMCIA_IOW_3_SHIFT 24
|
|
|
|
/* prog_waitcount */
|
|
#define SSB_PROG_WCNT_0 0x0000001F /* waitcount0 */
|
|
#define SSB_PROG_WCNT_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_PROG_WCNT_1_SHIFT 8
|
|
#define SSB_PROG_WCNT_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_PROG_WCNT_2_SHIFT 16
|
|
#define SSB_PROG_WCNT_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_PROG_WCNT_3_SHIFT 24
|
|
|
|
#define SSB_PROG_W0 0x0000000C
|
|
#define SSB_PROG_W1 0x00000A00
|
|
#define SSB_PROG_W2 0x00020000
|
|
#define SSB_PROG_W3 0x01000000
|
|
|
|
/* flash_waitcount */
|
|
#define SSB_FLASH_WCNT_0 0x0000001F /* waitcount0 */
|
|
#define SSB_FLASH_WCNT_1 0x00001F00 /* waitcount1 */
|
|
#define SSB_FLASH_WCNT_1_SHIFT 8
|
|
#define SSB_FLASH_WCNT_2 0x001F0000 /* waitcount2 */
|
|
#define SSB_FLASH_WCNT_2_SHIFT 16
|
|
#define SSB_FLASH_WCNT_3 0x1F000000 /* waitcount3 */
|
|
#define SSB_FLASH_WCNT_3_SHIFT 24
|
|
|
|
/* watchdog */
|
|
#define SSB_EXTIF_WATCHDOG_CLK 48000000 /* Hz */
|
|
|
|
|
|
|
|
#ifdef CONFIG_SSB_DRIVER_EXTIF
|
|
|
|
struct ssb_extif {
|
|
struct ssb_device *dev;
|
|
};
|
|
|
|
static inline bool ssb_extif_available(struct ssb_extif *extif)
|
|
{
|
|
return (extif->dev != NULL);
|
|
}
|
|
|
|
extern void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
|
|
u32 *plltype, u32 *n, u32 *m);
|
|
|
|
extern void ssb_extif_timing_init(struct ssb_extif *extif,
|
|
unsigned long ns);
|
|
|
|
u32 ssb_extif_gpio_in(struct ssb_extif *extif, u32 mask);
|
|
|
|
void ssb_extif_gpio_out(struct ssb_extif *extif, u32 mask, u32 value);
|
|
|
|
void ssb_extif_gpio_outen(struct ssb_extif *extif, u32 mask, u32 value);
|
|
|
|
#ifdef CONFIG_SSB_SERIAL
|
|
extern int ssb_extif_serial_init(struct ssb_extif *extif,
|
|
struct ssb_serial_port *ports);
|
|
#endif /* CONFIG_SSB_SERIAL */
|
|
|
|
|
|
#else /* CONFIG_SSB_DRIVER_EXTIF */
|
|
/* extif disabled */
|
|
|
|
struct ssb_extif {
|
|
};
|
|
|
|
static inline bool ssb_extif_available(struct ssb_extif *extif)
|
|
{
|
|
return 0;
|
|
}
|
|
|
|
static inline
|
|
void ssb_extif_get_clockcontrol(struct ssb_extif *extif,
|
|
u32 *plltype, u32 *n, u32 *m)
|
|
{
|
|
}
|
|
|
|
#endif /* CONFIG_SSB_DRIVER_EXTIF */
|
|
#endif /* LINUX_SSB_EXTIFCORE_H_ */
|