49b3f87496
The Texas Instruments DAC7512 has the exact same pinout, programming interface and power-down modes as the Texas Instruments DAC121S101 and Analog Devices AD5320, which are already supported by the IIO driver ad5446.c. Remove the duplicate misc driver. This requires user space to migrate to the standardized IIO sysfs ABI. (In other words, it needs to change a filename.) The IIO driver supports the chip's features more fully, e.g. the ability to power down the output or choose one of the available powerdown modes. There is an oddity with the misc driver in that it initializes the SPI slave to SPI_MODE_0, in contradiction to the datasheet which specifies that data is latched in on the falling edge, implying that SPI_MODE_1 or SPI_MODE_2 must be used. Another oddity is that Kconfig and the MODULE_DESCRIPTION() claim the chip has 16-bit resolution although it actually has 12-bit. Datasheets: http://www.ti.com/lit/ds/symlink/dac7512.pdf http://www.ti.com/lit/ds/symlink/dac121s101.pdf http://www.analog.com/media/en/technical-documentation/data-sheets/AD5320.pdf Signed-off-by: Lukas Wunner <lukas@wunner.de> Acked-by: Daniel Mack <daniel@zonque.org> Acked-by: Arnd Bergmann <arnd@arndb.de> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
633 lines
14 KiB
C
633 lines
14 KiB
C
/*
|
|
* AD5446 SPI DAC driver
|
|
*
|
|
* Copyright 2010 Analog Devices Inc.
|
|
*
|
|
* Licensed under the GPL-2 or later.
|
|
*/
|
|
|
|
#include <linux/interrupt.h>
|
|
#include <linux/workqueue.h>
|
|
#include <linux/device.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/sysfs.h>
|
|
#include <linux/list.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/err.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
|
|
#define MODE_PWRDWN_1k 0x1
|
|
#define MODE_PWRDWN_100k 0x2
|
|
#define MODE_PWRDWN_TRISTATE 0x3
|
|
|
|
/**
|
|
* struct ad5446_state - driver instance specific data
|
|
* @spi: spi_device
|
|
* @chip_info: chip model specific constants, available modes etc
|
|
* @reg: supply regulator
|
|
* @vref_mv: actual reference voltage used
|
|
*/
|
|
|
|
struct ad5446_state {
|
|
struct device *dev;
|
|
const struct ad5446_chip_info *chip_info;
|
|
struct regulator *reg;
|
|
unsigned short vref_mv;
|
|
unsigned cached_val;
|
|
unsigned pwr_down_mode;
|
|
unsigned pwr_down;
|
|
};
|
|
|
|
/**
|
|
* struct ad5446_chip_info - chip specific information
|
|
* @channel: channel spec for the DAC
|
|
* @int_vref_mv: AD5620/40/60: the internal reference voltage
|
|
* @write: chip specific helper function to write to the register
|
|
*/
|
|
|
|
struct ad5446_chip_info {
|
|
struct iio_chan_spec channel;
|
|
u16 int_vref_mv;
|
|
int (*write)(struct ad5446_state *st, unsigned val);
|
|
};
|
|
|
|
static const char * const ad5446_powerdown_modes[] = {
|
|
"1kohm_to_gnd", "100kohm_to_gnd", "three_state"
|
|
};
|
|
|
|
static int ad5446_set_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan, unsigned int mode)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
st->pwr_down_mode = mode + 1;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad5446_get_powerdown_mode(struct iio_dev *indio_dev,
|
|
const struct iio_chan_spec *chan)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
return st->pwr_down_mode - 1;
|
|
}
|
|
|
|
static const struct iio_enum ad5446_powerdown_mode_enum = {
|
|
.items = ad5446_powerdown_modes,
|
|
.num_items = ARRAY_SIZE(ad5446_powerdown_modes),
|
|
.get = ad5446_get_powerdown_mode,
|
|
.set = ad5446_set_powerdown_mode,
|
|
};
|
|
|
|
static ssize_t ad5446_read_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
char *buf)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%d\n", st->pwr_down);
|
|
}
|
|
|
|
static ssize_t ad5446_write_dac_powerdown(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
const struct iio_chan_spec *chan,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
unsigned int shift;
|
|
unsigned int val;
|
|
bool powerdown;
|
|
int ret;
|
|
|
|
ret = strtobool(buf, &powerdown);
|
|
if (ret)
|
|
return ret;
|
|
|
|
mutex_lock(&indio_dev->mlock);
|
|
st->pwr_down = powerdown;
|
|
|
|
if (st->pwr_down) {
|
|
shift = chan->scan_type.realbits + chan->scan_type.shift;
|
|
val = st->pwr_down_mode << shift;
|
|
} else {
|
|
val = st->cached_val;
|
|
}
|
|
|
|
ret = st->chip_info->write(st, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
|
|
return ret ? ret : len;
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info ad5446_ext_info_powerdown[] = {
|
|
{
|
|
.name = "powerdown",
|
|
.read = ad5446_read_dac_powerdown,
|
|
.write = ad5446_write_dac_powerdown,
|
|
.shared = IIO_SEPARATE,
|
|
},
|
|
IIO_ENUM("powerdown_mode", IIO_SEPARATE, &ad5446_powerdown_mode_enum),
|
|
IIO_ENUM_AVAILABLE("powerdown_mode", &ad5446_powerdown_mode_enum),
|
|
{ },
|
|
};
|
|
|
|
#define _AD5446_CHANNEL(bits, storage, _shift, ext) { \
|
|
.type = IIO_VOLTAGE, \
|
|
.indexed = 1, \
|
|
.output = 1, \
|
|
.channel = 0, \
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
|
|
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \
|
|
.scan_type = { \
|
|
.sign = 'u', \
|
|
.realbits = (bits), \
|
|
.storagebits = (storage), \
|
|
.shift = (_shift), \
|
|
}, \
|
|
.ext_info = (ext), \
|
|
}
|
|
|
|
#define AD5446_CHANNEL(bits, storage, shift) \
|
|
_AD5446_CHANNEL(bits, storage, shift, NULL)
|
|
|
|
#define AD5446_CHANNEL_POWERDOWN(bits, storage, shift) \
|
|
_AD5446_CHANNEL(bits, storage, shift, ad5446_ext_info_powerdown)
|
|
|
|
static int ad5446_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val,
|
|
int *val2,
|
|
long m)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
switch (m) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
*val = st->cached_val;
|
|
return IIO_VAL_INT;
|
|
case IIO_CHAN_INFO_SCALE:
|
|
*val = st->vref_mv;
|
|
*val2 = chan->scan_type.realbits;
|
|
return IIO_VAL_FRACTIONAL_LOG2;
|
|
}
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int ad5446_write_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int val,
|
|
int val2,
|
|
long mask)
|
|
{
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
int ret = 0;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
if (val >= (1 << chan->scan_type.realbits) || val < 0)
|
|
return -EINVAL;
|
|
|
|
val <<= chan->scan_type.shift;
|
|
mutex_lock(&indio_dev->mlock);
|
|
st->cached_val = val;
|
|
if (!st->pwr_down)
|
|
ret = st->chip_info->write(st, val);
|
|
mutex_unlock(&indio_dev->mlock);
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct iio_info ad5446_info = {
|
|
.read_raw = ad5446_read_raw,
|
|
.write_raw = ad5446_write_raw,
|
|
};
|
|
|
|
static int ad5446_probe(struct device *dev, const char *name,
|
|
const struct ad5446_chip_info *chip_info)
|
|
{
|
|
struct ad5446_state *st;
|
|
struct iio_dev *indio_dev;
|
|
struct regulator *reg;
|
|
int ret, voltage_uv = 0;
|
|
|
|
reg = devm_regulator_get(dev, "vcc");
|
|
if (!IS_ERR(reg)) {
|
|
ret = regulator_enable(reg);
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = regulator_get_voltage(reg);
|
|
if (ret < 0)
|
|
goto error_disable_reg;
|
|
|
|
voltage_uv = ret;
|
|
}
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*st));
|
|
if (indio_dev == NULL) {
|
|
ret = -ENOMEM;
|
|
goto error_disable_reg;
|
|
}
|
|
st = iio_priv(indio_dev);
|
|
st->chip_info = chip_info;
|
|
|
|
dev_set_drvdata(dev, indio_dev);
|
|
st->reg = reg;
|
|
st->dev = dev;
|
|
|
|
/* Establish that the iio_dev is a child of the device */
|
|
indio_dev->dev.parent = dev;
|
|
indio_dev->name = name;
|
|
indio_dev->info = &ad5446_info;
|
|
indio_dev->modes = INDIO_DIRECT_MODE;
|
|
indio_dev->channels = &st->chip_info->channel;
|
|
indio_dev->num_channels = 1;
|
|
|
|
st->pwr_down_mode = MODE_PWRDWN_1k;
|
|
|
|
if (st->chip_info->int_vref_mv)
|
|
st->vref_mv = st->chip_info->int_vref_mv;
|
|
else if (voltage_uv)
|
|
st->vref_mv = voltage_uv / 1000;
|
|
else
|
|
dev_warn(dev, "reference voltage unspecified\n");
|
|
|
|
ret = iio_device_register(indio_dev);
|
|
if (ret)
|
|
goto error_disable_reg;
|
|
|
|
return 0;
|
|
|
|
error_disable_reg:
|
|
if (!IS_ERR(reg))
|
|
regulator_disable(reg);
|
|
return ret;
|
|
}
|
|
|
|
static int ad5446_remove(struct device *dev)
|
|
{
|
|
struct iio_dev *indio_dev = dev_get_drvdata(dev);
|
|
struct ad5446_state *st = iio_priv(indio_dev);
|
|
|
|
iio_device_unregister(indio_dev);
|
|
if (!IS_ERR(st->reg))
|
|
regulator_disable(st->reg);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#if IS_ENABLED(CONFIG_SPI_MASTER)
|
|
|
|
static int ad5446_write(struct ad5446_state *st, unsigned val)
|
|
{
|
|
struct spi_device *spi = to_spi_device(st->dev);
|
|
__be16 data = cpu_to_be16(val);
|
|
|
|
return spi_write(spi, &data, sizeof(data));
|
|
}
|
|
|
|
static int ad5660_write(struct ad5446_state *st, unsigned val)
|
|
{
|
|
struct spi_device *spi = to_spi_device(st->dev);
|
|
uint8_t data[3];
|
|
|
|
data[0] = (val >> 16) & 0xFF;
|
|
data[1] = (val >> 8) & 0xFF;
|
|
data[2] = val & 0xFF;
|
|
|
|
return spi_write(spi, data, sizeof(data));
|
|
}
|
|
|
|
/**
|
|
* ad5446_supported_spi_device_ids:
|
|
* The AD5620/40/60 parts are available in different fixed internal reference
|
|
* voltage options. The actual part numbers may look differently
|
|
* (and a bit cryptic), however this style is used to make clear which
|
|
* parts are supported here.
|
|
*/
|
|
enum ad5446_supported_spi_device_ids {
|
|
ID_AD5300,
|
|
ID_AD5310,
|
|
ID_AD5320,
|
|
ID_AD5444,
|
|
ID_AD5446,
|
|
ID_AD5450,
|
|
ID_AD5451,
|
|
ID_AD5541A,
|
|
ID_AD5512A,
|
|
ID_AD5553,
|
|
ID_AD5601,
|
|
ID_AD5611,
|
|
ID_AD5621,
|
|
ID_AD5641,
|
|
ID_AD5620_2500,
|
|
ID_AD5620_1250,
|
|
ID_AD5640_2500,
|
|
ID_AD5640_1250,
|
|
ID_AD5660_2500,
|
|
ID_AD5660_1250,
|
|
ID_AD5662,
|
|
};
|
|
|
|
static const struct ad5446_chip_info ad5446_spi_chip_info[] = {
|
|
[ID_AD5300] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5310] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5320] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5444] = {
|
|
.channel = AD5446_CHANNEL(12, 16, 2),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5446] = {
|
|
.channel = AD5446_CHANNEL(14, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5450] = {
|
|
.channel = AD5446_CHANNEL(8, 16, 6),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5451] = {
|
|
.channel = AD5446_CHANNEL(10, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5541A] = {
|
|
.channel = AD5446_CHANNEL(16, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5512A] = {
|
|
.channel = AD5446_CHANNEL(12, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5553] = {
|
|
.channel = AD5446_CHANNEL(14, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5601] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 6),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5611] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 4),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5621] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5641] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5620_2500] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
|
|
.int_vref_mv = 2500,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5620_1250] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 2),
|
|
.int_vref_mv = 1250,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5640_2500] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
|
|
.int_vref_mv = 2500,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5640_1250] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(14, 16, 0),
|
|
.int_vref_mv = 1250,
|
|
.write = ad5446_write,
|
|
},
|
|
[ID_AD5660_2500] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
|
|
.int_vref_mv = 2500,
|
|
.write = ad5660_write,
|
|
},
|
|
[ID_AD5660_1250] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
|
|
.int_vref_mv = 1250,
|
|
.write = ad5660_write,
|
|
},
|
|
[ID_AD5662] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(16, 16, 0),
|
|
.write = ad5660_write,
|
|
},
|
|
};
|
|
|
|
static const struct spi_device_id ad5446_spi_ids[] = {
|
|
{"ad5300", ID_AD5300},
|
|
{"ad5310", ID_AD5310},
|
|
{"ad5320", ID_AD5320},
|
|
{"ad5444", ID_AD5444},
|
|
{"ad5446", ID_AD5446},
|
|
{"ad5450", ID_AD5450},
|
|
{"ad5451", ID_AD5451},
|
|
{"ad5452", ID_AD5444}, /* ad5452 is compatible to the ad5444 */
|
|
{"ad5453", ID_AD5446}, /* ad5453 is compatible to the ad5446 */
|
|
{"ad5512a", ID_AD5512A},
|
|
{"ad5541a", ID_AD5541A},
|
|
{"ad5542a", ID_AD5541A}, /* ad5541a and ad5542a are compatible */
|
|
{"ad5543", ID_AD5541A}, /* ad5541a and ad5543 are compatible */
|
|
{"ad5553", ID_AD5553},
|
|
{"ad5601", ID_AD5601},
|
|
{"ad5611", ID_AD5611},
|
|
{"ad5621", ID_AD5621},
|
|
{"ad5641", ID_AD5641},
|
|
{"ad5620-2500", ID_AD5620_2500}, /* AD5620/40/60: */
|
|
{"ad5620-1250", ID_AD5620_1250}, /* part numbers may look differently */
|
|
{"ad5640-2500", ID_AD5640_2500},
|
|
{"ad5640-1250", ID_AD5640_1250},
|
|
{"ad5660-2500", ID_AD5660_2500},
|
|
{"ad5660-1250", ID_AD5660_1250},
|
|
{"ad5662", ID_AD5662},
|
|
{"dac081s101", ID_AD5300}, /* compatible Texas Instruments chips */
|
|
{"dac101s101", ID_AD5310},
|
|
{"dac121s101", ID_AD5320},
|
|
{"dac7512", ID_AD5320},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad5446_spi_ids);
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id ad5446_of_ids[] = {
|
|
{ .compatible = "ti,dac7512" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad5446_of_ids);
|
|
#endif
|
|
|
|
static int ad5446_spi_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
|
|
return ad5446_probe(&spi->dev, id->name,
|
|
&ad5446_spi_chip_info[id->driver_data]);
|
|
}
|
|
|
|
static int ad5446_spi_remove(struct spi_device *spi)
|
|
{
|
|
return ad5446_remove(&spi->dev);
|
|
}
|
|
|
|
static struct spi_driver ad5446_spi_driver = {
|
|
.driver = {
|
|
.name = "ad5446",
|
|
.of_match_table = of_match_ptr(ad5446_of_ids),
|
|
},
|
|
.probe = ad5446_spi_probe,
|
|
.remove = ad5446_spi_remove,
|
|
.id_table = ad5446_spi_ids,
|
|
};
|
|
|
|
static int __init ad5446_spi_register_driver(void)
|
|
{
|
|
return spi_register_driver(&ad5446_spi_driver);
|
|
}
|
|
|
|
static void ad5446_spi_unregister_driver(void)
|
|
{
|
|
spi_unregister_driver(&ad5446_spi_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int ad5446_spi_register_driver(void) { return 0; }
|
|
static inline void ad5446_spi_unregister_driver(void) { }
|
|
|
|
#endif
|
|
|
|
#if IS_ENABLED(CONFIG_I2C)
|
|
|
|
static int ad5622_write(struct ad5446_state *st, unsigned val)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(st->dev);
|
|
__be16 data = cpu_to_be16(val);
|
|
|
|
return i2c_master_send(client, (char *)&data, sizeof(data));
|
|
}
|
|
|
|
/**
|
|
* ad5446_supported_i2c_device_ids:
|
|
* The AD5620/40/60 parts are available in different fixed internal reference
|
|
* voltage options. The actual part numbers may look differently
|
|
* (and a bit cryptic), however this style is used to make clear which
|
|
* parts are supported here.
|
|
*/
|
|
enum ad5446_supported_i2c_device_ids {
|
|
ID_AD5602,
|
|
ID_AD5612,
|
|
ID_AD5622,
|
|
};
|
|
|
|
static const struct ad5446_chip_info ad5446_i2c_chip_info[] = {
|
|
[ID_AD5602] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(8, 16, 4),
|
|
.write = ad5622_write,
|
|
},
|
|
[ID_AD5612] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(10, 16, 2),
|
|
.write = ad5622_write,
|
|
},
|
|
[ID_AD5622] = {
|
|
.channel = AD5446_CHANNEL_POWERDOWN(12, 16, 0),
|
|
.write = ad5622_write,
|
|
},
|
|
};
|
|
|
|
static int ad5446_i2c_probe(struct i2c_client *i2c,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
return ad5446_probe(&i2c->dev, id->name,
|
|
&ad5446_i2c_chip_info[id->driver_data]);
|
|
}
|
|
|
|
static int ad5446_i2c_remove(struct i2c_client *i2c)
|
|
{
|
|
return ad5446_remove(&i2c->dev);
|
|
}
|
|
|
|
static const struct i2c_device_id ad5446_i2c_ids[] = {
|
|
{"ad5301", ID_AD5602},
|
|
{"ad5311", ID_AD5612},
|
|
{"ad5321", ID_AD5622},
|
|
{"ad5602", ID_AD5602},
|
|
{"ad5612", ID_AD5612},
|
|
{"ad5622", ID_AD5622},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, ad5446_i2c_ids);
|
|
|
|
static struct i2c_driver ad5446_i2c_driver = {
|
|
.driver = {
|
|
.name = "ad5446",
|
|
},
|
|
.probe = ad5446_i2c_probe,
|
|
.remove = ad5446_i2c_remove,
|
|
.id_table = ad5446_i2c_ids,
|
|
};
|
|
|
|
static int __init ad5446_i2c_register_driver(void)
|
|
{
|
|
return i2c_add_driver(&ad5446_i2c_driver);
|
|
}
|
|
|
|
static void __exit ad5446_i2c_unregister_driver(void)
|
|
{
|
|
i2c_del_driver(&ad5446_i2c_driver);
|
|
}
|
|
|
|
#else
|
|
|
|
static inline int ad5446_i2c_register_driver(void) { return 0; }
|
|
static inline void ad5446_i2c_unregister_driver(void) { }
|
|
|
|
#endif
|
|
|
|
static int __init ad5446_init(void)
|
|
{
|
|
int ret;
|
|
|
|
ret = ad5446_spi_register_driver();
|
|
if (ret)
|
|
return ret;
|
|
|
|
ret = ad5446_i2c_register_driver();
|
|
if (ret) {
|
|
ad5446_spi_unregister_driver();
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
module_init(ad5446_init);
|
|
|
|
static void __exit ad5446_exit(void)
|
|
{
|
|
ad5446_i2c_unregister_driver();
|
|
ad5446_spi_unregister_driver();
|
|
}
|
|
module_exit(ad5446_exit);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>");
|
|
MODULE_DESCRIPTION("Analog Devices AD5444/AD5446 DAC");
|
|
MODULE_LICENSE("GPL v2");
|