kernel-fxtec-pro1x/drivers/mmc/pxamci.c
Richard Purdie c26971cbb3 [MMC] Add mmc_detect_change() delay support for PXAMCI driver
Allow PXA platforms to pass an appropriate delay value to the
PXA MCI driver for delaying detection changes.

Signed-Off-By: Richard Purdie <rpurdie@rpsys.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2005-09-08 22:48:16 +01:00

623 lines
14 KiB
C

/*
* linux/drivers/mmc/pxa.c - PXA MMCI driver
*
* Copyright (C) 2003 Russell King, All Rights Reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This hardware is really sick:
* - No way to clear interrupts.
* - Have to turn off the clock whenever we touch the device.
* - Doesn't tell you how many data blocks were transferred.
* Yuck!
*
* 1 and 3 byte data transfers not supported
* max block length up to 1023
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <linux/device.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/dma-mapping.h>
#include <linux/mmc/host.h>
#include <linux/mmc/protocol.h>
#include <asm/dma.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/scatterlist.h>
#include <asm/sizes.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/mmc.h>
#include "pxamci.h"
#ifdef CONFIG_MMC_DEBUG
#define DBG(x...) printk(KERN_DEBUG x)
#else
#define DBG(x...) do { } while (0)
#endif
#define DRIVER_NAME "pxa2xx-mci"
#define NR_SG 1
struct pxamci_host {
struct mmc_host *mmc;
spinlock_t lock;
struct resource *res;
void __iomem *base;
int irq;
int dma;
unsigned int clkrt;
unsigned int cmdat;
unsigned int imask;
unsigned int power_mode;
struct pxamci_platform_data *pdata;
struct mmc_request *mrq;
struct mmc_command *cmd;
struct mmc_data *data;
dma_addr_t sg_dma;
struct pxa_dma_desc *sg_cpu;
unsigned int dma_len;
unsigned int dma_dir;
};
static inline unsigned int ns_to_clocks(unsigned int ns)
{
return (ns * (CLOCKRATE / 1000000) + 999) / 1000;
}
static void pxamci_stop_clock(struct pxamci_host *host)
{
if (readl(host->base + MMC_STAT) & STAT_CLK_EN) {
unsigned long timeout = 10000;
unsigned int v;
writel(STOP_CLOCK, host->base + MMC_STRPCL);
do {
v = readl(host->base + MMC_STAT);
if (!(v & STAT_CLK_EN))
break;
udelay(1);
} while (timeout--);
if (v & STAT_CLK_EN)
dev_err(mmc_dev(host->mmc), "unable to stop clock\n");
}
}
static void pxamci_enable_irq(struct pxamci_host *host, unsigned int mask)
{
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
host->imask &= ~mask;
writel(host->imask, host->base + MMC_I_MASK);
spin_unlock_irqrestore(&host->lock, flags);
}
static void pxamci_disable_irq(struct pxamci_host *host, unsigned int mask)
{
unsigned long flags;
spin_lock_irqsave(&host->lock, flags);
host->imask |= mask;
writel(host->imask, host->base + MMC_I_MASK);
spin_unlock_irqrestore(&host->lock, flags);
}
static void pxamci_setup_data(struct pxamci_host *host, struct mmc_data *data)
{
unsigned int nob = data->blocks;
unsigned int timeout;
u32 dcmd;
int i;
host->data = data;
if (data->flags & MMC_DATA_STREAM)
nob = 0xffff;
writel(nob, host->base + MMC_NOB);
writel(1 << data->blksz_bits, host->base + MMC_BLKLEN);
timeout = ns_to_clocks(data->timeout_ns) + data->timeout_clks;
writel((timeout + 255) / 256, host->base + MMC_RDTO);
if (data->flags & MMC_DATA_READ) {
host->dma_dir = DMA_FROM_DEVICE;
dcmd = DCMD_INCTRGADDR | DCMD_FLOWTRG;
DRCMRTXMMC = 0;
DRCMRRXMMC = host->dma | DRCMR_MAPVLD;
} else {
host->dma_dir = DMA_TO_DEVICE;
dcmd = DCMD_INCSRCADDR | DCMD_FLOWSRC;
DRCMRRXMMC = 0;
DRCMRTXMMC = host->dma | DRCMR_MAPVLD;
}
dcmd |= DCMD_BURST32 | DCMD_WIDTH1;
host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len,
host->dma_dir);
for (i = 0; i < host->dma_len; i++) {
if (data->flags & MMC_DATA_READ) {
host->sg_cpu[i].dsadr = host->res->start + MMC_RXFIFO;
host->sg_cpu[i].dtadr = sg_dma_address(&data->sg[i]);
} else {
host->sg_cpu[i].dsadr = sg_dma_address(&data->sg[i]);
host->sg_cpu[i].dtadr = host->res->start + MMC_TXFIFO;
}
host->sg_cpu[i].dcmd = dcmd | sg_dma_len(&data->sg[i]);
host->sg_cpu[i].ddadr = host->sg_dma + (i + 1) *
sizeof(struct pxa_dma_desc);
}
host->sg_cpu[host->dma_len - 1].ddadr = DDADR_STOP;
wmb();
DDADR(host->dma) = host->sg_dma;
DCSR(host->dma) = DCSR_RUN;
}
static void pxamci_start_cmd(struct pxamci_host *host, struct mmc_command *cmd, unsigned int cmdat)
{
WARN_ON(host->cmd != NULL);
host->cmd = cmd;
if (cmd->flags & MMC_RSP_BUSY)
cmdat |= CMDAT_BUSY;
switch (cmd->flags & (MMC_RSP_MASK | MMC_RSP_CRC)) {
case MMC_RSP_SHORT | MMC_RSP_CRC:
cmdat |= CMDAT_RESP_SHORT;
break;
case MMC_RSP_SHORT:
cmdat |= CMDAT_RESP_R3;
break;
case MMC_RSP_LONG | MMC_RSP_CRC:
cmdat |= CMDAT_RESP_R2;
break;
default:
break;
}
writel(cmd->opcode, host->base + MMC_CMD);
writel(cmd->arg >> 16, host->base + MMC_ARGH);
writel(cmd->arg & 0xffff, host->base + MMC_ARGL);
writel(cmdat, host->base + MMC_CMDAT);
writel(host->clkrt, host->base + MMC_CLKRT);
writel(START_CLOCK, host->base + MMC_STRPCL);
pxamci_enable_irq(host, END_CMD_RES);
}
static void pxamci_finish_request(struct pxamci_host *host, struct mmc_request *mrq)
{
DBG("PXAMCI: request done\n");
host->mrq = NULL;
host->cmd = NULL;
host->data = NULL;
mmc_request_done(host->mmc, mrq);
}
static int pxamci_cmd_done(struct pxamci_host *host, unsigned int stat)
{
struct mmc_command *cmd = host->cmd;
int i;
u32 v;
if (!cmd)
return 0;
host->cmd = NULL;
/*
* Did I mention this is Sick. We always need to
* discard the upper 8 bits of the first 16-bit word.
*/
v = readl(host->base + MMC_RES) & 0xffff;
for (i = 0; i < 4; i++) {
u32 w1 = readl(host->base + MMC_RES) & 0xffff;
u32 w2 = readl(host->base + MMC_RES) & 0xffff;
cmd->resp[i] = v << 24 | w1 << 8 | w2 >> 8;
v = w2;
}
if (stat & STAT_TIME_OUT_RESPONSE) {
cmd->error = MMC_ERR_TIMEOUT;
} else if (stat & STAT_RES_CRC_ERR && cmd->flags & MMC_RSP_CRC) {
#ifdef CONFIG_PXA27x
/*
* workaround for erratum #42:
* Intel PXA27x Family Processor Specification Update Rev 001
*/
if (cmd->opcode == MMC_ALL_SEND_CID ||
cmd->opcode == MMC_SEND_CSD ||
cmd->opcode == MMC_SEND_CID) {
/* a bogus CRC error can appear if the msb of
the 15 byte response is a one */
if ((cmd->resp[0] & 0x80000000) == 0)
cmd->error = MMC_ERR_BADCRC;
} else {
DBG("ignoring CRC from command %d - *risky*\n",cmd->opcode);
}
#else
cmd->error = MMC_ERR_BADCRC;
#endif
}
pxamci_disable_irq(host, END_CMD_RES);
if (host->data && cmd->error == MMC_ERR_NONE) {
pxamci_enable_irq(host, DATA_TRAN_DONE);
} else {
pxamci_finish_request(host, host->mrq);
}
return 1;
}
static int pxamci_data_done(struct pxamci_host *host, unsigned int stat)
{
struct mmc_data *data = host->data;
if (!data)
return 0;
DCSR(host->dma) = 0;
dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len,
host->dma_dir);
if (stat & STAT_READ_TIME_OUT)
data->error = MMC_ERR_TIMEOUT;
else if (stat & (STAT_CRC_READ_ERROR|STAT_CRC_WRITE_ERROR))
data->error = MMC_ERR_BADCRC;
/*
* There appears to be a hardware design bug here. There seems to
* be no way to find out how much data was transferred to the card.
* This means that if there was an error on any block, we mark all
* data blocks as being in error.
*/
if (data->error == MMC_ERR_NONE)
data->bytes_xfered = data->blocks << data->blksz_bits;
else
data->bytes_xfered = 0;
pxamci_disable_irq(host, DATA_TRAN_DONE);
host->data = NULL;
if (host->mrq->stop && data->error == MMC_ERR_NONE) {
pxamci_stop_clock(host);
pxamci_start_cmd(host, host->mrq->stop, 0);
} else {
pxamci_finish_request(host, host->mrq);
}
return 1;
}
static irqreturn_t pxamci_irq(int irq, void *devid, struct pt_regs *regs)
{
struct pxamci_host *host = devid;
unsigned int ireg;
int handled = 0;
ireg = readl(host->base + MMC_I_REG);
DBG("PXAMCI: irq %08x\n", ireg);
if (ireg) {
unsigned stat = readl(host->base + MMC_STAT);
DBG("PXAMCI: stat %08x\n", stat);
if (ireg & END_CMD_RES)
handled |= pxamci_cmd_done(host, stat);
if (ireg & DATA_TRAN_DONE)
handled |= pxamci_data_done(host, stat);
}
return IRQ_RETVAL(handled);
}
static void pxamci_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct pxamci_host *host = mmc_priv(mmc);
unsigned int cmdat;
WARN_ON(host->mrq != NULL);
host->mrq = mrq;
pxamci_stop_clock(host);
cmdat = host->cmdat;
host->cmdat &= ~CMDAT_INIT;
if (mrq->data) {
pxamci_setup_data(host, mrq->data);
cmdat &= ~CMDAT_BUSY;
cmdat |= CMDAT_DATAEN | CMDAT_DMAEN;
if (mrq->data->flags & MMC_DATA_WRITE)
cmdat |= CMDAT_WRITE;
if (mrq->data->flags & MMC_DATA_STREAM)
cmdat |= CMDAT_STREAM;
}
pxamci_start_cmd(host, mrq->cmd, cmdat);
}
static int pxamci_get_ro(struct mmc_host *mmc)
{
struct pxamci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->get_ro)
return host->pdata->get_ro(mmc->dev);
/* Host doesn't support read only detection so assume writeable */
return 0;
}
static void pxamci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
{
struct pxamci_host *host = mmc_priv(mmc);
DBG("pxamci_set_ios: clock %u power %u vdd %u.%02u\n",
ios->clock, ios->power_mode, ios->vdd / 100,
ios->vdd % 100);
if (ios->clock) {
unsigned int clk = CLOCKRATE / ios->clock;
if (CLOCKRATE / clk > ios->clock)
clk <<= 1;
host->clkrt = fls(clk) - 1;
pxa_set_cken(CKEN12_MMC, 1);
/*
* we write clkrt on the next command
*/
} else {
pxamci_stop_clock(host);
pxa_set_cken(CKEN12_MMC, 0);
}
if (host->power_mode != ios->power_mode) {
host->power_mode = ios->power_mode;
if (host->pdata && host->pdata->setpower)
host->pdata->setpower(mmc->dev, ios->vdd);
if (ios->power_mode == MMC_POWER_ON)
host->cmdat |= CMDAT_INIT;
}
DBG("pxamci_set_ios: clkrt = %x cmdat = %x\n",
host->clkrt, host->cmdat);
}
static struct mmc_host_ops pxamci_ops = {
.request = pxamci_request,
.get_ro = pxamci_get_ro,
.set_ios = pxamci_set_ios,
};
static void pxamci_dma_irq(int dma, void *devid, struct pt_regs *regs)
{
printk(KERN_ERR "DMA%d: IRQ???\n", dma);
DCSR(dma) = DCSR_STARTINTR|DCSR_ENDINTR|DCSR_BUSERR;
}
static irqreturn_t pxamci_detect_irq(int irq, void *devid, struct pt_regs *regs)
{
struct pxamci_host *host = mmc_priv(devid);
mmc_detect_change(devid, host->pdata->detect_delay);
return IRQ_HANDLED;
}
static int pxamci_probe(struct device *dev)
{
struct platform_device *pdev = to_platform_device(dev);
struct mmc_host *mmc;
struct pxamci_host *host = NULL;
struct resource *r;
int ret, irq;
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
irq = platform_get_irq(pdev, 0);
if (!r || irq == NO_IRQ)
return -ENXIO;
r = request_mem_region(r->start, SZ_4K, DRIVER_NAME);
if (!r)
return -EBUSY;
mmc = mmc_alloc_host(sizeof(struct pxamci_host), dev);
if (!mmc) {
ret = -ENOMEM;
goto out;
}
mmc->ops = &pxamci_ops;
mmc->f_min = CLOCKRATE_MIN;
mmc->f_max = CLOCKRATE_MAX;
/*
* We can do SG-DMA, but we don't because we never know how much
* data we successfully wrote to the card.
*/
mmc->max_phys_segs = NR_SG;
/*
* Our hardware DMA can handle a maximum of one page per SG entry.
*/
mmc->max_seg_size = PAGE_SIZE;
host = mmc_priv(mmc);
host->mmc = mmc;
host->dma = -1;
host->pdata = pdev->dev.platform_data;
mmc->ocr_avail = host->pdata ?
host->pdata->ocr_mask :
MMC_VDD_32_33|MMC_VDD_33_34;
host->sg_cpu = dma_alloc_coherent(dev, PAGE_SIZE, &host->sg_dma, GFP_KERNEL);
if (!host->sg_cpu) {
ret = -ENOMEM;
goto out;
}
spin_lock_init(&host->lock);
host->res = r;
host->irq = irq;
host->imask = MMC_I_MASK_ALL;
host->base = ioremap(r->start, SZ_4K);
if (!host->base) {
ret = -ENOMEM;
goto out;
}
/*
* Ensure that the host controller is shut down, and setup
* with our defaults.
*/
pxamci_stop_clock(host);
writel(0, host->base + MMC_SPI);
writel(64, host->base + MMC_RESTO);
writel(host->imask, host->base + MMC_I_MASK);
host->dma = pxa_request_dma(DRIVER_NAME, DMA_PRIO_LOW,
pxamci_dma_irq, host);
if (host->dma < 0) {
ret = -EBUSY;
goto out;
}
ret = request_irq(host->irq, pxamci_irq, 0, DRIVER_NAME, host);
if (ret)
goto out;
dev_set_drvdata(dev, mmc);
if (host->pdata && host->pdata->init)
host->pdata->init(dev, pxamci_detect_irq, mmc);
mmc_add_host(mmc);
return 0;
out:
if (host) {
if (host->dma >= 0)
pxa_free_dma(host->dma);
if (host->base)
iounmap(host->base);
if (host->sg_cpu)
dma_free_coherent(dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
}
if (mmc)
mmc_free_host(mmc);
release_resource(r);
return ret;
}
static int pxamci_remove(struct device *dev)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
dev_set_drvdata(dev, NULL);
if (mmc) {
struct pxamci_host *host = mmc_priv(mmc);
if (host->pdata && host->pdata->exit)
host->pdata->exit(dev, mmc);
mmc_remove_host(mmc);
pxamci_stop_clock(host);
writel(TXFIFO_WR_REQ|RXFIFO_RD_REQ|CLK_IS_OFF|STOP_CMD|
END_CMD_RES|PRG_DONE|DATA_TRAN_DONE,
host->base + MMC_I_MASK);
DRCMRRXMMC = 0;
DRCMRTXMMC = 0;
free_irq(host->irq, host);
pxa_free_dma(host->dma);
iounmap(host->base);
dma_free_coherent(dev, PAGE_SIZE, host->sg_cpu, host->sg_dma);
release_resource(host->res);
mmc_free_host(mmc);
}
return 0;
}
#ifdef CONFIG_PM
static int pxamci_suspend(struct device *dev, pm_message_t state, u32 level)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
if (mmc && level == SUSPEND_DISABLE)
ret = mmc_suspend_host(mmc, state);
return ret;
}
static int pxamci_resume(struct device *dev, u32 level)
{
struct mmc_host *mmc = dev_get_drvdata(dev);
int ret = 0;
if (mmc && level == RESUME_ENABLE)
ret = mmc_resume_host(mmc);
return ret;
}
#else
#define pxamci_suspend NULL
#define pxamci_resume NULL
#endif
static struct device_driver pxamci_driver = {
.name = DRIVER_NAME,
.bus = &platform_bus_type,
.probe = pxamci_probe,
.remove = pxamci_remove,
.suspend = pxamci_suspend,
.resume = pxamci_resume,
};
static int __init pxamci_init(void)
{
return driver_register(&pxamci_driver);
}
static void __exit pxamci_exit(void)
{
driver_unregister(&pxamci_driver);
}
module_init(pxamci_init);
module_exit(pxamci_exit);
MODULE_DESCRIPTION("PXA Multimedia Card Interface Driver");
MODULE_LICENSE("GPL");