kernel-fxtec-pro1x/arch/arm/mach-omap2
Charulatha V 20252d4659 OMAP2PLUS: WDT: Fix: Disable WDT after reset during init
Inorder to avoid any assumptions from bootloader, the watchdog
timer module is reset during init. This enables the watchdog
timer.

Therefore, it is required to disable WDT after it is reset
during init. Otherwise the system would reboot as per the default
watchdog timer registers settings.

Later, when the watchdog driver is loaded, the watchdog timer settings
is adjusted as per the default timer_margin set in the driver and the
driver would supports the normal operations supported by OMAP watchdog
timer.

Signed-off-by: Charulatha V <charu@ti.com>
Reported-by: Kevin Hilman <khilman@deeprootsystems.com>
Acked-by: Kevin Hilman <khilman@deeprootsystems.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
2010-10-08 10:23:06 -07:00
..
include/mach OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-2430sdp.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-3430sdp.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-3630sdp.c Merge branch 'pm-hwmods' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-10-08 10:20:40 -07:00
board-4430sdp.c Merge branches 'devel-omap1' and 'devel-omap2plus' into omap-for-linus 2010-10-08 10:19:53 -07:00
board-am3517evm.c OMAP: mach-omap2: Fix miscellaneous sparse warnings 2010-10-08 10:12:37 -07:00
board-apollon.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-cm-t35.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-cm-t3517.c omap3: cm-t3517: add support for TI HECC 2010-09-27 15:15:35 -07:00
board-devkit8000.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-flash.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-flash.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-generic.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-h4.c Merge branch 'devel-map-io' into omap-for-linus 2010-08-04 14:43:45 +03:00
board-igep0020.c omap3: Remove VMMC2 regulator on IGEP v2 2010-10-08 10:22:57 -07:00
board-igep0030.c omap3: Add minimal OMAP3 IGEP module support 2010-10-08 10:22:11 -07:00
board-ldp.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-n8x0.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-omap3beagle.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-omap3evm.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-omap3logic.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-omap3pandora.c omap: pandora: enable twl4030 charger 2010-10-01 16:35:25 -07:00
board-omap3stalker.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-omap3touchbook.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-omap4panda.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-overo.c omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
board-rx51-peripherals.c OMAP3: Keypad: Fix incorrect type initializer 2010-10-08 10:12:38 -07:00
board-rx51-sdram.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
board-rx51-video.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-rx51.c omap3: Unify omap2_set_globals_3[43,6x]x functions 2010-08-04 14:43:18 +03:00
board-zoom-debugboard.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom-peripherals.c Merge branch 'pm-hwmods' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-10-08 10:20:40 -07:00
board-zoom2.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
board-zoom3.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
clkt2xxx_apll.c OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
clkt2xxx_dpllcore.c
clkt2xxx_osc.c
clkt2xxx_sys.c
clkt2xxx_virt_prcm_set.c OMAP2 clock: fix recursive spinlock attempt when CONFIG_CPU_FREQ=y 2010-05-20 12:31:14 -06:00
clkt34xx_dpll3m2.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clkt_clksel.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clkt_dpll.c OMAP2/3/4 clock: fix DPLL multiplier value errors; also copyrights, includes, documentation 2010-02-24 12:15:03 -07:00
clock.c OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock.h OMAP2+ clock: clean up clkt_clksel.c 2010-05-20 12:31:06 -06:00
clock2xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock2xxx.h OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock3xxx.c OMAP2/3 clock: combine OMAP2 & 3 boot-time MPU rate change code 2010-02-24 17:45:15 -07:00
clock3xxx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3xxx_data.c OMAP clock: Add uart4_ick/fck definitions for 3630 2010-09-29 12:42:59 -07:00
clock34xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock34xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock36xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock44xx_data.c OMAP4: clocks: Fix ES2 clock issues 2010-09-27 14:02:56 -06:00
clock2420_data.c omap: crypto: updates to enable omap aes 2010-09-27 10:15:25 -07:00
clock2430.c OMAP2 clock: split OMAP2420, OMAP2430 clock data into their own files 2010-02-24 12:29:42 -07:00
clock2430_data.c omap: crypto: updates to enable omap aes 2010-09-27 10:15:25 -07:00
clock3517.c OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock3517.h OMAP3/4 clock: split into per-chip family files 2010-02-24 12:16:15 -07:00
clock_common_data.c OMAP3 clock: rename RATE_IN_343X, RATE_IN_3430ES2 to match reality 2010-05-20 12:31:07 -06:00
clockdomain.c OMAP clockdomain: initialize clockdomain registers when the clockdomain layer starts 2010-09-23 17:14:12 -07:00
clockdomains.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
clockdomains44xx.h OMAP4: PRM: Remove MPU internal code name and apply PRCM naming convention 2010-05-20 12:31:11 -06:00
cm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
cm-regbits-34xx.h OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs 2010-09-29 12:43:00 -07:00
cm-regbits-44xx.h OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2 2010-09-27 14:02:55 -06:00
cm.c OMAP24xx: CM: fix mask used for checking IDLEST status 2010-07-26 16:34:28 -06:00
cm.h OMAP4: hwmod & CM: Implement the omap4_cm_wait_module_ready function 2010-05-20 12:31:08 -06:00
cm4xxx.c OMAP4: PM: Declare idle modules as functional too 2010-09-24 10:23:18 -06:00
cm44xx.h OMAP4: PM: Define additional registers for ES2 2010-09-27 14:02:56 -06:00
control.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
cpuidle34xx.c OMAP3: CPUidle: remove redundant setting of PER next power state 2010-10-01 13:49:32 -07:00
devices.c OMAP2PLUS: WDT: Fix: Disable WDT after reset during init 2010-10-08 10:23:06 -07:00
dpll3xxx.c fix typos concerning "hierarchy" 2010-06-16 18:03:14 +02:00
emu.c omap2/3: Fix initcalls for multi-omap 2010-02-15 09:27:05 -08:00
gpmc-nand.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
gpmc-onenand.c
gpmc-smc91x.c
gpmc-smsc911x.c ARM: OMAP3LOGIC: Add generic smsc911x support when connected to GPMC 2010-09-28 11:39:18 -07:00
gpmc.c omap3 nand: cleanup virtual address usages 2010-08-02 15:30:38 +03:00
hsmmc.c omap4 hsmmc: Register offset handling 2010-10-01 16:35:28 -07:00
hsmmc.h omap: mmc: extended to pass host capabilities from board file 2010-09-27 10:15:26 -07:00
i2c.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00
id.c omap2/3: Update revision identification 2010-10-01 16:35:24 -07:00
io.c OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
io.h OMAP: plat-omap: Fix static function warnings 2010-10-08 10:12:38 -07:00
iommu2.c omap iommu: move iommu_disable at fault to the above layer 2010-06-29 07:55:07 +03:00
irq.c OMAP: mach-omap2: Fix miscellaneous sparse warnings 2010-10-08 10:12:37 -07:00
Kconfig omap3: Add minimal OMAP3 IGEP module support 2010-10-08 10:22:11 -07:00
mailbox.c arm: remove cast from void* 2010-09-28 09:54:28 -07:00
Makefile omap3: Add minimal OMAP3 IGEP module support 2010-10-08 10:22:11 -07:00
Makefile.boot
mcbsp.c omap2: McBSP: Remove mux code for OMAP2420 McBSP2 and do cleanups 2010-09-27 10:15:25 -07:00
mux.c omap: Fix omap_mux_init_signal not to trash muxname 2010-10-01 16:35:24 -07:00
mux.h omap: Fix omap_mux_init_signal not to trash muxname 2010-10-01 16:35:24 -07:00
mux34xx.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
mux34xx.h
mux2420.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
mux2420.h omap: mux: Add data for 2420 2010-07-05 16:31:36 +03:00
mux2430.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
mux2430.h omap: mux: Add data for 2430 2010-07-05 16:31:36 +03:00
omap-headsmp.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap-hotplug.c omap4: hotplug: Add basic CPU hotplug support 2010-08-02 13:18:19 +03:00
omap-iommu.c omap iommu: update ducati mmu irq define name 2010-06-29 07:55:08 +03:00
omap-smp.c omap: Fix sev instruction usage for multi-omap 2010-08-16 09:22:04 +03:00
omap4-common.c omap4: l2x0: Fix init parameter for es2.0 2010-09-24 11:30:18 +05:30
omap44xx-smc.S omap4: Add smc API to read AuxCoreBoot0 register 2010-08-02 13:18:18 +03:00
omap_hwmod.c OMAP: hwmod: Set autoidle after smartidle during _sysc_enable 2010-09-24 10:23:19 -06:00
omap_hwmod_3xxx_data.c manual merge for pm-hwmod-uart due to conflicts 2010-10-01 13:24:10 -07:00
omap_hwmod_44xx_data.c manual merge for pm-hwmod-uart due to conflicts 2010-10-01 13:24:10 -07:00
omap_hwmod_2420_data.c manual merge for pm-hwmod-uart due to conflicts 2010-10-01 13:24:10 -07:00
omap_hwmod_2430_data.c manual merge for pm-hwmod-uart due to conflicts 2010-10-01 13:24:10 -07:00
omap_hwmod_common_data.c OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
omap_hwmod_common_data.h OMAP: hwmod data: add class for IVA hwmods 2010-07-26 16:34:31 -06:00
opp2xxx.h
opp2420_data.c
opp2430_data.c
pm-debug.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
pm.c OMAP4: pm: Change l3_main to l3_main_1 during bus device init 2010-09-23 17:14:16 -07:00
pm.h OMAP: PM: Fix build when CONFIG_PM_DEBUG isn't set 2010-10-01 13:50:34 -07:00
pm24xx.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
pm34xx.c Merge branch 'pm-hwmods' of ssh://master.kernel.org/pub/scm/linux/kernel/git/khilman/linux-omap-pm into omap-for-linus 2010-10-08 10:20:40 -07:00
pm44xx.c omap4: suspend: Add basic system suspend support 2010-08-02 13:18:18 +03:00
pm_bus.c OMAP2+: PM: initial runtime PM core support 2010-09-21 11:51:23 -07:00
powerdomain.c OMAP2: powerdomain: Add break in switch statement 2010-08-03 10:21:07 +03:00
powerdomains.h
powerdomains24xx.h omap2: Convert ARCH_OMAP24XX to ARCH_OMAP2 2010-02-15 09:27:01 -08:00
powerdomains34xx.h omap: 3630: disable TLL SAR on 3630 ES1 2010-08-04 14:43:52 +03:00
powerdomains44xx.h OMAP4: powerdomain: Update DSS logic state for ES2 2010-09-27 14:02:56 -06:00
prcm-common.h OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs 2010-09-29 12:43:00 -07:00
prcm.c OMAP: mach-omap2: Fix static declaration warnings 2010-10-08 09:57:40 -07:00
prm-regbits-24xx.h OMAP2 PRCM: convert OMAP2 PRCM macros to the _SHIFT/_MASK suffixes 2010-05-20 12:31:04 -06:00
prm-regbits-34xx.h OMAP3: PRCM: Consider UART4 for 3630 chip in prcm_setup_regs 2010-09-29 12:43:00 -07:00
prm-regbits-44xx.h OMAP4: CM & PRM: Update PRCM register bitshifts and masks for ES2 2010-09-27 14:02:55 -06:00
prm.h OMAP2/3: PRM: add module hard reset support 2010-09-21 15:12:40 -06:00
prm2xxx_3xxx.c OMAP2/3: PRM: add module hard reset support 2010-09-21 15:12:40 -06:00
prm44xx.c OMAP4: PRM: add module hard reset support 2010-09-21 15:12:21 -06:00
prm44xx.h OMAP4: PM: Define additional registers for ES2 2010-09-27 14:02:56 -06:00
sdram-hynix-h8mbx00u0mer-0em.h
sdram-micron-mt46h32m32lf-6.h
sdram-numonyx-m65kxxxxam.h omap3: SDRC: add timing data for Numonyx M65KxxxxAM 2010-02-17 17:23:20 -08:00
sdram-qimonda-hyb18m512160af-6.h
sdrc.c omap2/3/4: ioremap omap_globals module 2010-02-23 10:57:40 -08:00
sdrc.h
sdrc2xxx.c
serial.c OMAP3: serial: Fix uart4 handling for 3630 2010-09-29 12:43:02 -07:00
sleep24xx.S
sleep34xx.S fix typos concerning "acquire" 2010-06-16 18:03:15 +02:00
sram34xx.S omap3: Prevent SDRC deadlock when L3 is changing frequency 2010-09-27 14:02:59 -06:00
sram242x.S
sram243x.S
timer-gp.c OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-gp.h OMAP2plus: Fix static function warnings 2010-10-08 10:02:49 -07:00
timer-mpu.c omap4: Use irq line defines from irq-44xx.h 2010-02-23 15:29:08 -08:00
usb-ehci.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-fs.c omap: mux: Make omap2 FS USB code use new mux functions 2010-07-05 16:31:38 +03:00
usb-musb.c omap: mux: Remove old mux code 2010-07-05 16:31:40 +03:00
usb-tusb6010.c omap: mux: Convert 2420 platform init code to use new mux code 2010-07-05 16:31:40 +03:00